Hi Pros,
I am very new to this and just created by ID after my phone went into a boot loop.
I have been using a galaxy S3 (GT-I9300) that i bought from a friend for the last 3 months. It worked perfect and I loved it. However today while calling a friend the phone hanged. I tried to restart and nothing happened so i pulled the battery out and restarted it. Since then the phone has been continuously restarting. On researching i realized that there is a term for this - "boot loop".
I tried the Volume Up + Power + Home and went into recovery mode. I wiped the data and wiped the cache. It did not help.
I tried the Volume down + Power + Home and went into Download Mode - ODIN (this would mean my friend flashed it before he gave it to me). I downloaded a custom stock ROM and used ODIN 3.0 to update it. It successfully finished but the phone still keeps restarting. I can only get till the screen to select the language and then it restarts.
I am very confused now and need help to fix this.
If you can get to the language screen then it's not a boot loop.. I'm sure..
Can you boot into recovery using vol up + home + power.. What do you see then?
What stock firmware did you flash and where from? Is the right region?
NatTheCat said:
If you can get to the language screen then it's not a boot loop.. I'm sure..
Can you boot into recovery using vol up + home + power.. What do you see then?
What stock firmware did you flash and where from? Is the right region?
Click to expand...
Click to collapse
Thanks for replying. I get the language screen but before I can select anything it just re-boots.
In recovery i see the following options
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
How can I know if the region is right? I have it from a friend so I am not sure what region I am looking for. I download the stock ROM from http://forum.xda-developers.com/showthread.php?t=1646610.
What do you think might the problem be?
In that section do a factory reset then clear the cache then factory reset again..
Then install the Poland stock rom
Edit: You may have to change the country code after its been flashed
Hey demon ! Is your phone rooted ?
Sent from my GT-I9300 using Tapatalk 2
NatTheCat said:
In that section do a factory reset then clear the cache then factory reset again..
Then install the Poland stock rom
Edit: You may have to change the country code after its been flashed
Click to expand...
Click to collapse
I did a factory reset -> clear cache -> factory reset from the recovery mode and installed the Poland stock ROM. It completed successfully as well. However the same problem persists. The phone starts, boots and shows the Samsung icon and then in about 15 seconds again restarts.
The following is the log from the ODIN.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELKC_I9300OXXELK4_I9300XXELKC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
xanthrax said:
Hey demon ! Is your phone rooted ?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I assume I am rooted if i can go into ODIN mode using Volume down + Home + Power. I got the phone from a friend who I cannot trace now. So I am at your mercy.
Root is a word i just heard today when I wanted to fix my phone.
Most probably not rooted considering tha your recovery doesn't contain the option to flash from sd card ...
Sent from my GT-I9300 using Tapatalk 2
Yepp that all looks the real deal.. You could try flashing a Cm10 ROM..
Rest the phone and cache again
Edit
Download that top nightly and extract it then let odin find the file and flash
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
No your not rooted.. Your on stock recovery not CWM
NatTheCat said:
Yepp that all looks the real deal.. You could try flashing a Cm10 ROM..
Rest the phone and cache again
Download that top nightly and extract it then let odin find the file and flash
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
No your not rooted.. Your on stock recovery not CWM
Click to expand...
Click to collapse
xanthrax said:
Most probably not rooted considering tha your recovery doesn't contain the option to flash from sd card ...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Guys. I now understand that I am not rooted. I am downloading the CyanogenMod.
How do you think can this happen? Is some App causing the issue? I am try to understand that might be the cause of this. Can this be a hardware issue?
It could well have been an app that caused the problem in the first place but it's more likely the ROM.. Now since your not sure what ROM it was on its hard to Pont a finger at why..
When you format all apps and data are gone. Except the stuff in internal and external storage.. I.e Music and photos..
I don't think think that it is a hardware issue as it's most likely it would not boot to language menu.. Could be wrong though
Keep us informed on how it's going!
I personally don't like odin ... my advice is to roit your phone and then you'll have more options to fix issues
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
I personally don't like odin ... my advice is to roit your phone and then you'll have more options to fix issues
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yeh I agree it's easier without it but..
How can he do that when it's in a boot loop.. The issue at hand is he has no ROM installed..
I rooted my phone using sgs3 toolkit by Mike , you don't need a rom installed jyst boot in download mode and follow the instructions.
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
I rooted my phone using sgs3 toolkit by Mike , you don't need a rom installed jyst boot in download mode and follow the instructions.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
But you needed to use odin to flash the toolkit right?
NatTheCat said:
But you needed to use odin to flash the toolkit right?
Click to expand...
Click to collapse
No mate ... check the thread
http://forum.xda-developers.com/showthread.php?t=1703488
Sent from my GT-I9300 using Tapatalk 2
Guys,
Here is the latest update. I downloaded the stock ROM based on the model number and region and flashed my phone using ODIN.
The issue still persists, but in a very weird manner. The phone boots, then stays on for about 60 seconds. During this 60 seconds, you can call, text, surf and do whatever you want. Then the Phone re-starts. Then the phone is usable again for some time before re-starting.
Does this give you pros any idea on what might be wrong? Is this a boot-loop?
Latest Update:-
After a 4-5 restarts, the phone did not restart for the last one hour. I could text and even check my voice mails. The phone is the stock ROM and I have not installed any apps yet.
Then it all started again with a different frequency. Reboot and phone usable for 60 seconds-15 minutes and then restart!!!!
Now I am confused even more and want to get to the bottom of this issue.
1. Can this be a hardware issue?
2. Why did the issue start in the first place?
3. When I flashed ROM from a different region, can the phone detect that and restart it?
4. Is it because I am not rooted?
5. If I root the device, can i install ROM from different region?
Please pros, any guesstimate is appreciated.
Is not a boot loop mate. Endless reboots without start is .
Sent from my GT-I9300
I had this happen on my galaxy s2 idk if its same but it ended up being a bad motherboard/sticky power button
Sent from my SAMSUNG-SGH-T989 using xda premium
Related
I recently tried to flash a custom rom and everything went to crap. My phone entered a boot loop and would not go past the opening screen. I was upgraded to ICS via Kies and was rooted.
Model Number: GT-I9100M
Android Version: 4.03
Baseband Version: I9100MUGLD3
Kernel Version: [email protected] #3
Build Number: IML74K.UGLD3
That is my phone information.
I have tried to recover my nandroid backup from recovery to the same end result nothing but boot screen.
I have attempted wiped cache user/data fact reset, dalvik, battery stats, fixed permissions and all the other tricks that people tried to suggest. I also tried to revert back to stock bell ICS roms and GB roms. I have ticked the repartition and loaded the gb pit as a last resort but it still is not working.
I am now flashed back to stock ICS and am stick looking at the samsung galaxy S2 opening logo and nothing else. Can someone please help me to get my phone working again.
I still have access to recovery and download mode so it appears from what I read that this is a soft brick. I am able to flash roms but they do nothing to help get back into the phone itself. from further reading it may be something more serious. This was my first attempt at a custom rom but if I can get ti working again I will keep researching to try again someday when I get my bravery back. It was the NEAT rom btw and the dev has been very helpful trying to assist me. if anyone else has had this issue and solved it please lend me your brains so I might do the same.
trevolver said:
I recently tried to flash a custom rom and everything went to crap. My phone entered a boot loop and would not go past the opening screen. I was upgraded to ICS via Kies and was rooted.
Model Number: GT-I9100M
Android Version: 4.03
Baseband Version: I9100MUGLD3
Kernel Version: [email protected] #3
Build Number: IML74K.UGLD3
That is my phone information.
I have tried to recover my nandroid backup from recovery to the same end result nothing but boot screen.
I have attempted wiped cache user/data fact reset, dalvik, battery stats, fixed permissions and all the other tricks that people tried to suggest. I also tried to revert back to stock bell ICS roms and GB roms. I have ticked the repartition and loaded the gb pit as a last resort but it still is not working.
I am now flashed back to stock ICS and am stick looking at the samsung galaxy S2 opening logo and nothing else. Can someone please help me to get my phone working again.
I still have access to recovery and download mode so it appears from what I read that this is a soft brick. I am able to flash roms but they do nothing to help get back into the phone itself. from further reading it may be something more serious. This was my first attempt at a custom rom but if I can get ti working again I will keep researching to try again someday when I get my bravery back. It was the NEAT rom btw and the dev has been very helpful trying to assist me. if anyone else has had this issue and solved it please lend me your brains so I might do the same.
Click to expand...
Click to collapse
so u have tried flashing via Odin using a different STOCK rom? i had a similar but not sure if its the same problem stucking on a boot logo screen. wipe dalvik/cache and factory reset did not do anything after restore.
I was able to resolve the problem by reflashing a STOCK ROM via Odin to at least boot and restore via recovery to go back to where my phone was.
hope that helps.
shuweee said:
so u have tried flashing via Odin using a different STOCK rom? i had a similar but not sure if its the same problem stucking on a boot logo screen. wipe dalvik/cache and factory reset did not do anything after restore.
I was able to resolve the problem by reflashing a STOCK ROM via Odin to at least boot and restore via recovery to go back to where my phone was.
hope that helps.
Click to expand...
Click to collapse
Did you restore a stock GB or stock ICS?
Can you get into download mode? Vol down home and power button? If so you can flash something else
Sent from my GT-P7510 using xda premium
kilometers4 said:
Can you get into download mode? Vol down home and power button? If so you can flash something else
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
I have attempted to flash 3 custom mods and 2 stock mods as well as recover with cwm and install a custom rom I had stored on internal sd. All have ended with the same result.
On a side note when I attempt a GB based rom it boots directly into recovery with alot of red stating nothing can be mounted and no access to sd card. I am only able to flash ics roms atm.
trevolver said:
I have attempted to flash 3 custom mods and 2 stock mods as well as recover with cwm and install a custom rom I had stored on internal sd. All have ended with the same result.
On a side note when I attempt a GB based rom it boots directly into recovery with alot of red stating nothing can be mounted and no access to sd card. I am only able to flash ics roms atm.
Click to expand...
Click to collapse
What is the error message in Odin?
Sent from my GT-P7510 using xda premium
kilometers4 said:
What is the error message in Odin?
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
That's the thing everything goes through in odin for ICS.
When I do GB through the recovery pack I do not get an error it just freezes at the loading of the data.img and sits there for as long as 1 hour. but if I flash just a rom or the kernel it passes. It is when the phone reboots and goes into recovery that I get the failed to mount sdcard failed to mount system failed to mount data failed to mount efs or emms (spelling ?).
I am completely lost.
any input would be greatly appreciated
Hey if anyone is around and are able to give any other ideas or input it would be greatly appreciated. I do not care if i lose the data I just want to get the phone to boot up so I can use it again
trevolver said:
Hey if anyone is around and are able to give any other ideas or input it would be greatly appreciated. I do not care if i lose the data I just want to get the phone to boot up so I can use it again
Click to expand...
Click to collapse
Find a insecure kernel and flash it in Odin
Sent from my GT-P7510 using xda premium
kilometers4 said:
Find a insecure kernel and flash it in Odin
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
should I flash an ICS or a GB
trevolver said:
should I flash an ICS or a GB
Click to expand...
Click to collapse
It's up to you. Just make sure you research it
Sent from my GT-P7510 using xda premium
kilometers4 said:
It's up to you. Just make sure you research it
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
so I flashed CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.tar
odin was successful:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
would not boot past the galaxy s2 opening screen
Booted into recovery cleared the cache
went into advanced:
wiped dalvik and battery stats, then fixed permissions
went into mounts and storage:
wiped cache, system and data.
am going to try to recover one of my earlier backups to see what happens.
is there anythign else you would suggest instead?
trevolver said:
so I flashed CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.tar
odin was successful:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
would not boot past the galaxy s2 opening screen
Booted into recovery cleared the cache
went into advanced:
wiped dalvik and battery stats, then fixed permissions
went into mounts and storage:
wiped cache, system and data.
am going to try to recover one of my earlier backups to see what happens.
is there anythign else you would suggest instead?
Click to expand...
Click to collapse
Can you get to cwmr to restore a backup?
Sent from my GT-I9100 using xda premium
kilometers4 said:
Can you get to cwmr to restore a backup?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
been frozen on restoring data for almost 25 mins now I do not think it is going to go much further.
should I wipe everything again and then flash the stick back on there?
trevolver said:
been frozen on restoring data for almost 25 mins now I do not think it is going to go much further.
should I wipe everything again and then flash the stick back on there?
Click to expand...
Click to collapse
Yea it couldn't hurt. I think you're out of options.
When my phone sometime hangs on restoring data I press the volume up and down and tap the power button.
Sent from my GT-I9100 using xda premium
kilometers4 said:
Yea it couldn't hurt. I think you're out of options.
When my phone sometime hangs on restoring data I press the volume up and down and tap the power button.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
any idea what causes that?
trevolver said:
any idea what causes that?
Click to expand...
Click to collapse
Nope not really. Sometimes it's a corrupted zip file to the phone being finicky to needing to be fully wiped. Hard to say
Sent from my GT-P7510 using xda premium
trevolver said:
been frozen on restoring data for almost 25 mins now I do not think it is going to go much further.
should I wipe everything again and then flash the stick back on there?
Click to expand...
Click to collapse
Did you get through the boot up?
Sent from my GT-P7510 using xda premium
kilometers4 said:
Did you get through the boot up?
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
nah it froze on the flash screen same as always the last 2 days
flashed the following with odin: I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
success based on it but nothing past the logo.
think I am going to give up and wait for my jig to arrive and try my chances with bell and samsung to see if they are willing to do anything.
Hello, unfortunately my phone took the opportunity to have the power button jam and cause it to loop on and off whilst it was charging for roughly 7 hours. The phone now hangs at the "Samsung Galaxy SIII" Screen.
I've tried flashing a stock rom via Odin , however i get the error "There is no PIT parition."
Is there any other workaway around this?
I have read around the forum and tried different usb ports but to no avail.
Are you sure you didn't tick to use PIT?
If not, your partition table may be broken and you'll need the one on samfirmware.com to revive it.
Sent from my GT-I9300 using xda premium
Where can i get the partition table at samfirmware.com?
It it in the forums or somewhere on the front page? I can't seem to find it sorry.
Would i also just re-partition it with the PIT file on Odin?
Hello! I have found the partition file for the 16gb Galaxy S3 however i receive a new error.
It says :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
How do i fix this? Thank you and sorry.
If it was the correct PIT file used then it looks like either a JTag repair ( cheaper) or a service centre repair .
jje
Riionten said:
Hello! I have found the partition file for the 16gb Galaxy S3 however i receive a new error.
It says :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
How do i fix this? Thank you and sorry.
Click to expand...
Click to collapse
try to fix with 3part firmware and tick re-partition use the pit file that comes in the package.
download it here http://narod.ru/disk/51312212001.a4.../I9300XXALEF_I9300XXLEF_I9300OXEALE4.rar.html
Just tried to use the 3 part firmware.
I still get the PIT error.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALEF_611327_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLEF_REV02_REV04_CL1147871.tar.md5 is valid.
<OSM> CSC_OXE_I9300OXEALE4_CL606160_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
--------------------------------------------------------------------------
What is a JTag and where can i have my phone repaired? Sorry still a beginner.
Here: http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
Two seconds to Google There may be others, search
NEVER tick repartition again
Sent from my GT-P6810 using xda premium
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
mariosraptor said:
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
maybe you are right but i have never encountered this. i have usually been forced to S1 and S2 after wrong bootloader writting. they could not be booted so had to fix them via jtag.
---------- Post added at 04:56 PM ---------- Previous post was at 04:24 PM ----------
if you are skillfull enough you can try this http://forum.xda-developers.com/showthread.php?t=1731255
you will need another same phone and the multiple tars that i told you to download.
bear in mind that i will not be held responsible for any further damage if any occurs,
i have not made this nor i have tried it. this absolutely Samsung made. if you feel that it is over your head DO NOT TRY IT!!!!!!!!!!!!
UpInTheAir said:
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
Click to expand...
Click to collapse
That's true, but in extremely rare cases that happened
beginner : phone hang at samsung galaxy siii gt-19300
hye please help..i didnt do anything to my phone. it hang at samsung logo even after vol up + home + power..please help me...
up here! same happend to a friend, and nothing working, any ideas?
javituh said:
up here! same happend to a friend, and nothing working, any ideas?
Click to expand...
Click to collapse
JTag repair is cheaper than a service centre repair .
jje
UpInTheAir said:
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
Click to expand...
Click to collapse
@up in the air
hi! can i directly flash the boot recovery file thru odins selecting it in "bootloader" option? as i have a SIII which just boots till samsung galaxy sIII and thats all never went front! it does go in boot-loader mode, but not in recovery mode!
i did a reset userdata and cache thru recovery when i forgot my pattern lock, since then its not booted! ive tried everything, bbut the problem is still the same!
and when u boot the phone in boot-loader mode to flash with odin i get these;
"
odin mode
product name: gt-19300
custom Binary download: yes (7 counts)
current Binary: samsung official
system status: custom
"
pls share any new solution's to fix these kind of problems! iam having sleepless nights due to this!
WBR
ReyTech.
ReyTech said:
@up in the air
hi! can i directly flash the boot recovery file thru odins selecting it in "bootloader" option? as i have a SIII which just boots till samsung galaxy sIII and thats all never went front! it does go in boot-loader mode, but not in recovery mode!
i did a reset userdata and cache thru recovery when i forgot my pattern lock, since then its not booted! ive tried everything, bbut the problem is still the same!
and when u boot the phone in boot-loader mode to flash with odin i get these;
"
odin mode
product name: gt-19300
custom Binary download: yes (7 counts)
current Binary: samsung official
system status: custom
"
pls share any new solution's to fix these kind of problems! iam having sleepless nights due to this!
WBR
ReyTech.
Click to expand...
Click to collapse
You can flash stock recovery through Odin - PDA
OR
BACKUP data to PC and flash full firmware package with Odin. Follow Intratech guide here : http://forum.xda-developers.com/showthread.php?t=1671969
You can download firmware packages from XDA (Intratech etc), samsung-updates.com or samfirmware.com
Then re-root and flash CWM recovery
Sent from my GT-I9300 using xda premium
mariosraptor said:
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
You sir took away a lot of my worries!!! because i already was thinking about just buying a new s3, but it does enter download mode, so YES there is hope! :laugh: (it is more of histarical laugh, but yes hope indeed)
---------- Post added at 09:30 AM ---------- Previous post was at 09:19 AM ----------
UpInTheAir said:
You can flash stock recovery through Odin - PDA
OR
BACKUP data to PC and flash full firmware package with Odin. Follow Intratech guide here : http://forum.xda-developers.com/showthread.php?t=1671969
You can download firmware packages from XDA (Intratech etc), samsung-updates.com or samfirmware.com
Then re-root and flash CWM recovery
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I really tried to figure out how but got stuck, how exactly do you put your phone into stock recovery mode trough odin?
George1195 said:
You sir took away a lot of my worries!!! because i already was thinking about just buying a new s3, but it does enter download mode, so YES there is hope! :laugh: (it is more of histarical laugh, but yes hope indeed)
---------- Post added at 09:30 AM ---------- Previous post was at 09:19 AM ----------
I really tried to figure out how but got stuck, how exactly do you put your phone into stock recovery mode trough odin?
Click to expand...
Click to collapse
You don't need to get into recovery when using Odin. You need download mode. But any search would have clarified that
Power off and press :
Vol down + home + power (keep depressed until download mode)
Same for recovery (Vol up instead)
Sent from my GT-I9300 using xda premium
UpInTheAir said:
You don't need to get into recovery when using Odin. You need download mode. But any search would have clarified that
Power off and press :
Vol down + home + power (keep depressed until download mode)
Same for recovery (Vol up instead)
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I think his problem is that he can't enter recovery, he can only enter download mode. He's asking if there's a way he can enter recovery mode through Odin (by flashing it?) not the other way around.
Hello.
I tried the MAK-DROID rom (thread) and it works great, but MAK-DROID didn't have the language pt-br (portuguese from Brazil). So I found the Aspire Rom (thread) and I give a try... and thats was a bad idea.
Now my fone even boot. It freezes on "GT-S5300 SAMSUNG" and vibrate a several times.
So, I boot on recovery and apply CWM again. On CWM I applied the MAK-DROID again, but didn't work.
After that I tried restore the my stock backup done with CWM. But even this didn't work. I received a message about EXTFS (or something like that) and impossibility of format the /system.
My final thought was try with Odin. So I follow the post #8 from MAK-DROID thread. I downlod the Odin and the S5300XXLF5 firmware. I open Odin and selected on PDA the *.tar.md5 file. But I received:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I tried again, this time with the pit file (S5300_coriemmc_0117.pit) on PIT option (when I select the pit file, automatically the option "Re-partition" is checked) and the *.tar.md5 file on PDA option. But I received:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I still have access to CWM (the update.zip is accessible from recovery).
I do not intend to seek the service of samsung because I'm pretty sure you can fix the problem.
Anyone can help me?
solution
always do a data and partition wipe after you install a new rom before you reboot the device.....such that you wont get these errors check and tell me....:cyclops::cyclops::cyclops::good::victory::victory::victory:
drganbds said:
always do a data and partition wipe after you install a new rom before you reboot the device.....such that you wont get these errors check and tell me....:cyclops::cyclops::cyclops::good::victory::victory::victory:
Click to expand...
Click to collapse
Yeah, I always do that. My workflow is "wipe data/cache -> install rom -> wipe data/cache (again) -> reboot".
But didn't work. If I applied the Aspire Rom I can reboot, but I'v got stock on a black "FACTORY MODE" screen. If I reboot and try applied the MAK-DROID or restore my stock rom I'v got stock on "GT-S5300 SAMSUNG" vibrate screen.
oh sir.have u try to reflash it with stock rom?
---------- Post added at 10:39 PM ---------- Previous post was at 10:32 PM ----------
sir i think u should find a compatible firmware if u want to flash aspire rom. what is your firmware before you flash aspire?
threeofakind said:
oh sir.have u try to reflash it with stock rom?
---------- Post added at 10:39 PM ---------- Previous post was at 10:32 PM ----------
sir i think u should find a compatible firmware if u want to flash aspire rom. what is your firmware before you flash aspire?
Click to expand...
Click to collapse
Yes, I tried restore my stock rom with the backup I've made with CWM. But when I do the restore the CWM says:
CMW-base Recovery v5.0.2.8
Checking MD5 sums...
Restoring system...
E: format_volume: make_extf4fs failed on /dev/block/mmcblk07
Error while formatting /system!
About compatible firmware, I used one that was supposedly compatible (see this thread) but when the installation was finished and the phone reboots, the fone freezes on a black screen where it is written "FACTORY MODE" and the fone suffers a lot of force closes...
Flash ur stock rom through odin first then try makdroid....dont try to backup ur firmware through cwm and restore its still under development it will gives u error like this...
Sent from my GT-S5300 using xda app-developers app
drganbds said:
Flash ur stock rom through odin first then try makdroid....dont try to backup ur firmware through cwm and restore its still under development it will gives u error like this...
Sent from my GT-S5300 using xda app-developers app
Click to expand...
Click to collapse
How can I do that? I have 4 files:
cache.ext4.tar
data.ext4.tar
nandroid.md5
system.ext4.tar
Can you tell me the workflow?
tutabeier said:
Yeah, I always do that. My workflow is "wipe data/cache -> install rom -> wipe data/cache (again) -> reboot".
But didn't work. If I applied the Aspire Rom I can reboot, but I'v got stock on a black "FACTORY MODE" screen. If I reboot and try applied the MAK-DROID or restore my stock rom I'v got stock on "GT-S5300 SAMSUNG" vibrate screen.
Click to expand...
Click to collapse
you have to flash this rom with stock recover after flashing my rom you have to do wipe data... it is working i did not have own this phone but my two friend have galaxy pocket and they both using my this rom .... so there is no chance to softbrick you device ...
adnanahmad1786 said:
you have to flash this rom with stock recover after flashing my rom you have to do wipe data... it is working i did not have own this phone but my two friend have galaxy pocket and they both using my this rom .... so there is no chance to softbrick you device ...
Click to expand...
Click to collapse
Well, I cant imagine that to flash I must use the stock recovery. The stock recovery cannot "see" the external SD, only the internal memory. How can I put the rom on the internal memory if I cannot open the internal memory on pc?
Anyone can help me?
I already found a Samsung service in my city and I think they can restore the system, but I fear that I must pay somenthing....
I successfully unbrick my phone.
I could not flash with the one file * tar.md5 but with splitfus2 I could separate the file into 3 and with these 3 files I could flash with Odin.
Just one more question: I'm now always appear in roaming. I was using a Galaxy 5 (Cyanogenmod) and he was always roaming too.
Does anyone know if I will be charged with the price of roaming using 3G connections and inside my "normal" area.
I am in the same situation right now, I would kindly ask you to provide the files needed to go back to stock rom and a step by step guide on how to solve this problem I found after flashing MAK's rom.
Thank you!
Aspire ROM 0.1
Maybe you installed just the v2 version,you need to install the v0.1 and lastly the v2 rom.
Check if the rom size is 20-40 mb is just the v2,or if is 100-120mb is the 0.1
Regarding Explode v1.0 ROM by explodeaamir
Can anyone help me out with the flashing of Explode v1.0 rom.. i loved the appearance of the rom but i could not flash it to my Galaxy Pocket GT-S5300.. beforre explode i flashed Aspire v0.1 rom and now when i try to flash explode the rom doesnt show up its only aspire. i followed the procedure as given by explodeaamir but i guess it wasn't succesful.. can anyone tell what went wrong and plz suggest me ways to flash explode v1.0
Yes you will be charged!
Ajinkyapatil55 said:
Can anyone help me out with the flashing of Explode v1.0 rom.. i loved the appearance of the rom but i could not flash it to my Galaxy Pocket GT-S5300.. beforre explode i flashed Aspire v0.1 rom and now when i try to flash explode the rom doesnt show up its only aspire. i followed the procedure as given by explodeaamir but i guess it wasn't succesful.. can anyone tell what went wrong and plz suggest me ways to flash explode v1.0
Click to expand...
Click to collapse
I think the system memory is full or not enough system memory.. try to delete some not usefull apps.
I mean system apps.
teztaz--v3 said:
I think the system memory is full or not enough system memory.. try to delete some not usefull apps.
I mean system apps.
Click to expand...
Click to collapse
Thanks.. I will surely try it.. Also i do have one doubt.. Will flashing the stock rom and then again flashing any custom rom solve the problem? Would it help ?
Ajinkyapatil55 said:
Thanks.. I will surely try it.. Also i do have one doubt.. Will flashing the stock rom and then again flashing any custom rom solve the problem? Would it help ?
Click to expand...
Click to collapse
Maybe.. but i'm flash the stock rom when my phone is blank.. cant enter recovery or boot just blank..
Or, you can use format system in cwm then flash mak droid v2. Because that rom, you can flash any rom except blue jelly's rom.
Can anybody tell me how to manually update play store ? I'm using Blackstar v2 rom...
Sent from my GT-S5300 using xda app-developers app
---------- Post added at 01:34 PM ---------- Previous post was at 12:55 PM ----------
Please help me i hv already wasted about 100 mb of my data pack... Can play store be manually updated ?
Sent from my GT-S5300
Ajinkyapatil55 said:
Can anybody tell me how to manually update play store ? I'm using Blackstar v2 rom...
Sent from my GT-S5300 using xda app-developers app
---------- Post added at 01:34 PM ---------- Previous post was at 12:55 PM ----------
Please help me i hv already wasted about 100 mb of my data pack... Can play store be manually updated ?
Sent from my GT-S5300
Click to expand...
Click to collapse
Try to download google play store v3.10.14.. (i think. it latest)
use google to search it..
then.. install it.. or push it on system
Hey guys,
I recently flashed null_24 custom rom and after rebooting the phone it got stuck at the Samsung Galaxy s3 logo.
When trying to enter CWM (Touch recovery) i get a black screen and it seems to freeze.
I was able to enter download mode and tried to flash stock rom via Odin.
I tried rebooting my PC and using different USB ports but it failed every time...
Then i tried to recover my phone via kies but it got stuck at 0%
Is there anything i can do or is my phone broken for good?
I could use any help!
Thanks in advance
You need to give more detail.
Do you have an internation or usa s3?
What error did you get with odin?
If you flashed a rom image for a different phone then your phone is probably bricked. Likewise if you get pit errors in odin. If thats the case then it needs a repair job.
Sent from my GT-I9300 using xda premium
I have an international s3
I flashed null_ roms before, and hat no problems with them. But null_24 didn't let me boot and froze my cwm.
Here's my Odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The log doesnt look good. I would not mess with it until somebody more knowledgable can help.
If you try things like pit files you may make it beyond repair by yourself and need to send it somewhere for repair.
Sorry I cant really help you further and I hope you get it sorted.
Sent from my GT-I9300 using xda premium
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Theshawty said:
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Is there anything else I can do?
JonOssim said:
Is there anything else I can do?
Click to expand...
Click to collapse
No looks like you broke it and need a service centre .
jje
JonOssim said:
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Click to expand...
Click to collapse
Nope. Service Center it is.
Sent from my GT-I9300 using xda app-developers app
Is there any way I can reset the flash counter via download mode?
And is there any way to retrieve my data on my internal sd?
So I guess it's a no?
JonOssim said:
So I guess it's a no?
Click to expand...
Click to collapse
You could try install a kernel only in odin. One with a recovery. Speedmod maybe? This may give you your recovery back and odin might let it Flash.
Worth a try
Drew071
Sent from my GT-I9300 using xda app-developers app
Okay thanks!
I'll try it when i get home
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
This is so frustrating!
I tried flashing the kernel hundred times but i get the same errorlog as before...
I'll try to flash older firmwares like you said ratatattata
ratatattata said:
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
Click to expand...
Click to collapse
hey, did you have the same odin error log as me??
JonOssim said:
hey, did you have the same odin error log as me??
Click to expand...
Click to collapse
Yes, I believe it was just that log.
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
mahithm said:
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
Click to expand...
Click to collapse
I can't access recovery even after flashing :C just tried it.
Buckstrat said:
I can't access recovery even after flashing :C just tried it.
Click to expand...
Click to collapse
Are you getting bootloops or is it stuck at the bootscreen?
mahithm said:
Are you getting bootloops or is it stuck at the bootscreen?
Click to expand...
Click to collapse
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Buckstrat said:
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Click to expand...
Click to collapse
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
mahithm said:
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Buckstrat said:
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Click to expand...
Click to collapse
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
mahithm said:
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Already tried this one i think is first one i followed.. Still nothing :C
Logg from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_WHLA1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLA1.tar.md5 is valid.
<OSM> CSC_S5830M_UUBLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> HEDGE_NVRAM8_RF_LE.bin
<ID:0/003> sysparm_dep.img
<ID:0/003> boot.img
<ID:0/003> param.lfs
<ID:0/003> system.img
<ID:0/003> sbl.bin
<ID:0/003> userdata.img
<ID:0/003> BcmCP.img
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Buckstrat said:
Already tried this one i think is first one i followed.. Still nothing :C
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Click to expand...
Click to collapse
Try the instructions from here. Do post the result. Hope I Helped
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
mahithm said:
Try the instructions from here. Do post the result. Hope I Helped
Click to expand...
Click to collapse
Done, i'm not making mistakes in flashing :C
eiPeiDweP said:
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
Just tried this one nothing :crying:
Update:
I've got into recovery, rooted and flashes cwm. Did the wiped and flashed again, stil nothing also flashed a rom from CWM and still nothing... Come on guys this cellphone is from my gf and i'm a poor virgin guy who wants to have sex.
Buckstrat said:
Done, i'm not making mistakes in flashing :C
Click to expand...
Click to collapse
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
mahithm said:
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
Click to expand...
Click to collapse
Still nothing bro :crying:.. I just noticed i got over 3gb on different firmwares for the S5830 :cyclops::cyclops:
Bump
Update
Buckstrat said:
Bump
Click to expand...
Click to collapse
Buckstrat said:
Update
Click to expand...
Click to collapse
As much as I want to help you, I'm out of idea's But I'm sure the following people will be able to help you @Hitesh2626 and @amolgosavi (sorry for tagging you two but this guy needs your help).
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Hitesh2626 said:
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Click to expand...
Click to collapse
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Buckstrat said:
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Click to expand...
Click to collapse
Don't flash Ace's firmware it will hard brick then you can't restore it by your self you need to give it to Service Center,
And do split by your self and make a wipe package and flash it follow these video