Hello.
I tried the MAK-DROID rom (thread) and it works great, but MAK-DROID didn't have the language pt-br (portuguese from Brazil). So I found the Aspire Rom (thread) and I give a try... and thats was a bad idea.
Now my fone even boot. It freezes on "GT-S5300 SAMSUNG" and vibrate a several times.
So, I boot on recovery and apply CWM again. On CWM I applied the MAK-DROID again, but didn't work.
After that I tried restore the my stock backup done with CWM. But even this didn't work. I received a message about EXTFS (or something like that) and impossibility of format the /system.
My final thought was try with Odin. So I follow the post #8 from MAK-DROID thread. I downlod the Odin and the S5300XXLF5 firmware. I open Odin and selected on PDA the *.tar.md5 file. But I received:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I tried again, this time with the pit file (S5300_coriemmc_0117.pit) on PIT option (when I select the pit file, automatically the option "Re-partition" is checked) and the *.tar.md5 file on PDA option. But I received:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I still have access to CWM (the update.zip is accessible from recovery).
I do not intend to seek the service of samsung because I'm pretty sure you can fix the problem.
Anyone can help me?
solution
always do a data and partition wipe after you install a new rom before you reboot the device.....such that you wont get these errors check and tell me....:cyclops::cyclops::cyclops::good::victory::victory::victory:
drganbds said:
always do a data and partition wipe after you install a new rom before you reboot the device.....such that you wont get these errors check and tell me....:cyclops::cyclops::cyclops::good::victory::victory::victory:
Click to expand...
Click to collapse
Yeah, I always do that. My workflow is "wipe data/cache -> install rom -> wipe data/cache (again) -> reboot".
But didn't work. If I applied the Aspire Rom I can reboot, but I'v got stock on a black "FACTORY MODE" screen. If I reboot and try applied the MAK-DROID or restore my stock rom I'v got stock on "GT-S5300 SAMSUNG" vibrate screen.
oh sir.have u try to reflash it with stock rom?
---------- Post added at 10:39 PM ---------- Previous post was at 10:32 PM ----------
sir i think u should find a compatible firmware if u want to flash aspire rom. what is your firmware before you flash aspire?
threeofakind said:
oh sir.have u try to reflash it with stock rom?
---------- Post added at 10:39 PM ---------- Previous post was at 10:32 PM ----------
sir i think u should find a compatible firmware if u want to flash aspire rom. what is your firmware before you flash aspire?
Click to expand...
Click to collapse
Yes, I tried restore my stock rom with the backup I've made with CWM. But when I do the restore the CWM says:
CMW-base Recovery v5.0.2.8
Checking MD5 sums...
Restoring system...
E: format_volume: make_extf4fs failed on /dev/block/mmcblk07
Error while formatting /system!
About compatible firmware, I used one that was supposedly compatible (see this thread) but when the installation was finished and the phone reboots, the fone freezes on a black screen where it is written "FACTORY MODE" and the fone suffers a lot of force closes...
Flash ur stock rom through odin first then try makdroid....dont try to backup ur firmware through cwm and restore its still under development it will gives u error like this...
Sent from my GT-S5300 using xda app-developers app
drganbds said:
Flash ur stock rom through odin first then try makdroid....dont try to backup ur firmware through cwm and restore its still under development it will gives u error like this...
Sent from my GT-S5300 using xda app-developers app
Click to expand...
Click to collapse
How can I do that? I have 4 files:
cache.ext4.tar
data.ext4.tar
nandroid.md5
system.ext4.tar
Can you tell me the workflow?
tutabeier said:
Yeah, I always do that. My workflow is "wipe data/cache -> install rom -> wipe data/cache (again) -> reboot".
But didn't work. If I applied the Aspire Rom I can reboot, but I'v got stock on a black "FACTORY MODE" screen. If I reboot and try applied the MAK-DROID or restore my stock rom I'v got stock on "GT-S5300 SAMSUNG" vibrate screen.
Click to expand...
Click to collapse
you have to flash this rom with stock recover after flashing my rom you have to do wipe data... it is working i did not have own this phone but my two friend have galaxy pocket and they both using my this rom .... so there is no chance to softbrick you device ...
adnanahmad1786 said:
you have to flash this rom with stock recover after flashing my rom you have to do wipe data... it is working i did not have own this phone but my two friend have galaxy pocket and they both using my this rom .... so there is no chance to softbrick you device ...
Click to expand...
Click to collapse
Well, I cant imagine that to flash I must use the stock recovery. The stock recovery cannot "see" the external SD, only the internal memory. How can I put the rom on the internal memory if I cannot open the internal memory on pc?
Anyone can help me?
I already found a Samsung service in my city and I think they can restore the system, but I fear that I must pay somenthing....
I successfully unbrick my phone.
I could not flash with the one file * tar.md5 but with splitfus2 I could separate the file into 3 and with these 3 files I could flash with Odin.
Just one more question: I'm now always appear in roaming. I was using a Galaxy 5 (Cyanogenmod) and he was always roaming too.
Does anyone know if I will be charged with the price of roaming using 3G connections and inside my "normal" area.
I am in the same situation right now, I would kindly ask you to provide the files needed to go back to stock rom and a step by step guide on how to solve this problem I found after flashing MAK's rom.
Thank you!
Aspire ROM 0.1
Maybe you installed just the v2 version,you need to install the v0.1 and lastly the v2 rom.
Check if the rom size is 20-40 mb is just the v2,or if is 100-120mb is the 0.1
Regarding Explode v1.0 ROM by explodeaamir
Can anyone help me out with the flashing of Explode v1.0 rom.. i loved the appearance of the rom but i could not flash it to my Galaxy Pocket GT-S5300.. beforre explode i flashed Aspire v0.1 rom and now when i try to flash explode the rom doesnt show up its only aspire. i followed the procedure as given by explodeaamir but i guess it wasn't succesful.. can anyone tell what went wrong and plz suggest me ways to flash explode v1.0
Yes you will be charged!
Ajinkyapatil55 said:
Can anyone help me out with the flashing of Explode v1.0 rom.. i loved the appearance of the rom but i could not flash it to my Galaxy Pocket GT-S5300.. beforre explode i flashed Aspire v0.1 rom and now when i try to flash explode the rom doesnt show up its only aspire. i followed the procedure as given by explodeaamir but i guess it wasn't succesful.. can anyone tell what went wrong and plz suggest me ways to flash explode v1.0
Click to expand...
Click to collapse
I think the system memory is full or not enough system memory.. try to delete some not usefull apps.
I mean system apps.
teztaz--v3 said:
I think the system memory is full or not enough system memory.. try to delete some not usefull apps.
I mean system apps.
Click to expand...
Click to collapse
Thanks.. I will surely try it.. Also i do have one doubt.. Will flashing the stock rom and then again flashing any custom rom solve the problem? Would it help ?
Ajinkyapatil55 said:
Thanks.. I will surely try it.. Also i do have one doubt.. Will flashing the stock rom and then again flashing any custom rom solve the problem? Would it help ?
Click to expand...
Click to collapse
Maybe.. but i'm flash the stock rom when my phone is blank.. cant enter recovery or boot just blank..
Or, you can use format system in cwm then flash mak droid v2. Because that rom, you can flash any rom except blue jelly's rom.
Can anybody tell me how to manually update play store ? I'm using Blackstar v2 rom...
Sent from my GT-S5300 using xda app-developers app
---------- Post added at 01:34 PM ---------- Previous post was at 12:55 PM ----------
Please help me i hv already wasted about 100 mb of my data pack... Can play store be manually updated ?
Sent from my GT-S5300
Ajinkyapatil55 said:
Can anybody tell me how to manually update play store ? I'm using Blackstar v2 rom...
Sent from my GT-S5300 using xda app-developers app
---------- Post added at 01:34 PM ---------- Previous post was at 12:55 PM ----------
Please help me i hv already wasted about 100 mb of my data pack... Can play store be manually updated ?
Sent from my GT-S5300
Click to expand...
Click to collapse
Try to download google play store v3.10.14.. (i think. it latest)
use google to search it..
then.. install it.. or push it on system
Related
Hi Pros,
I am very new to this and just created by ID after my phone went into a boot loop.
I have been using a galaxy S3 (GT-I9300) that i bought from a friend for the last 3 months. It worked perfect and I loved it. However today while calling a friend the phone hanged. I tried to restart and nothing happened so i pulled the battery out and restarted it. Since then the phone has been continuously restarting. On researching i realized that there is a term for this - "boot loop".
I tried the Volume Up + Power + Home and went into recovery mode. I wiped the data and wiped the cache. It did not help.
I tried the Volume down + Power + Home and went into Download Mode - ODIN (this would mean my friend flashed it before he gave it to me). I downloaded a custom stock ROM and used ODIN 3.0 to update it. It successfully finished but the phone still keeps restarting. I can only get till the screen to select the language and then it restarts.
I am very confused now and need help to fix this.
If you can get to the language screen then it's not a boot loop.. I'm sure..
Can you boot into recovery using vol up + home + power.. What do you see then?
What stock firmware did you flash and where from? Is the right region?
NatTheCat said:
If you can get to the language screen then it's not a boot loop.. I'm sure..
Can you boot into recovery using vol up + home + power.. What do you see then?
What stock firmware did you flash and where from? Is the right region?
Click to expand...
Click to collapse
Thanks for replying. I get the language screen but before I can select anything it just re-boots.
In recovery i see the following options
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
How can I know if the region is right? I have it from a friend so I am not sure what region I am looking for. I download the stock ROM from http://forum.xda-developers.com/showthread.php?t=1646610.
What do you think might the problem be?
In that section do a factory reset then clear the cache then factory reset again..
Then install the Poland stock rom
Edit: You may have to change the country code after its been flashed
Hey demon ! Is your phone rooted ?
Sent from my GT-I9300 using Tapatalk 2
NatTheCat said:
In that section do a factory reset then clear the cache then factory reset again..
Then install the Poland stock rom
Edit: You may have to change the country code after its been flashed
Click to expand...
Click to collapse
I did a factory reset -> clear cache -> factory reset from the recovery mode and installed the Poland stock ROM. It completed successfully as well. However the same problem persists. The phone starts, boots and shows the Samsung icon and then in about 15 seconds again restarts.
The following is the log from the ODIN.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELKC_I9300OXXELK4_I9300XXELKC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
xanthrax said:
Hey demon ! Is your phone rooted ?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I assume I am rooted if i can go into ODIN mode using Volume down + Home + Power. I got the phone from a friend who I cannot trace now. So I am at your mercy.
Root is a word i just heard today when I wanted to fix my phone.
Most probably not rooted considering tha your recovery doesn't contain the option to flash from sd card ...
Sent from my GT-I9300 using Tapatalk 2
Yepp that all looks the real deal.. You could try flashing a Cm10 ROM..
Rest the phone and cache again
Edit
Download that top nightly and extract it then let odin find the file and flash
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
No your not rooted.. Your on stock recovery not CWM
NatTheCat said:
Yepp that all looks the real deal.. You could try flashing a Cm10 ROM..
Rest the phone and cache again
Download that top nightly and extract it then let odin find the file and flash
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
No your not rooted.. Your on stock recovery not CWM
Click to expand...
Click to collapse
xanthrax said:
Most probably not rooted considering tha your recovery doesn't contain the option to flash from sd card ...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Guys. I now understand that I am not rooted. I am downloading the CyanogenMod.
How do you think can this happen? Is some App causing the issue? I am try to understand that might be the cause of this. Can this be a hardware issue?
It could well have been an app that caused the problem in the first place but it's more likely the ROM.. Now since your not sure what ROM it was on its hard to Pont a finger at why..
When you format all apps and data are gone. Except the stuff in internal and external storage.. I.e Music and photos..
I don't think think that it is a hardware issue as it's most likely it would not boot to language menu.. Could be wrong though
Keep us informed on how it's going!
I personally don't like odin ... my advice is to roit your phone and then you'll have more options to fix issues
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
I personally don't like odin ... my advice is to roit your phone and then you'll have more options to fix issues
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yeh I agree it's easier without it but..
How can he do that when it's in a boot loop.. The issue at hand is he has no ROM installed..
I rooted my phone using sgs3 toolkit by Mike , you don't need a rom installed jyst boot in download mode and follow the instructions.
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
I rooted my phone using sgs3 toolkit by Mike , you don't need a rom installed jyst boot in download mode and follow the instructions.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
But you needed to use odin to flash the toolkit right?
NatTheCat said:
But you needed to use odin to flash the toolkit right?
Click to expand...
Click to collapse
No mate ... check the thread
http://forum.xda-developers.com/showthread.php?t=1703488
Sent from my GT-I9300 using Tapatalk 2
Guys,
Here is the latest update. I downloaded the stock ROM based on the model number and region and flashed my phone using ODIN.
The issue still persists, but in a very weird manner. The phone boots, then stays on for about 60 seconds. During this 60 seconds, you can call, text, surf and do whatever you want. Then the Phone re-starts. Then the phone is usable again for some time before re-starting.
Does this give you pros any idea on what might be wrong? Is this a boot-loop?
Latest Update:-
After a 4-5 restarts, the phone did not restart for the last one hour. I could text and even check my voice mails. The phone is the stock ROM and I have not installed any apps yet.
Then it all started again with a different frequency. Reboot and phone usable for 60 seconds-15 minutes and then restart!!!!
Now I am confused even more and want to get to the bottom of this issue.
1. Can this be a hardware issue?
2. Why did the issue start in the first place?
3. When I flashed ROM from a different region, can the phone detect that and restart it?
4. Is it because I am not rooted?
5. If I root the device, can i install ROM from different region?
Please pros, any guesstimate is appreciated.
Is not a boot loop mate. Endless reboots without start is .
Sent from my GT-I9300
I had this happen on my galaxy s2 idk if its same but it ended up being a bad motherboard/sticky power button
Sent from my SAMSUNG-SGH-T989 using xda premium
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
What does Odin say when you try to flash the stock rom?
Format each and everything apart from sdcard in cwm and try.
Odin shouldn't fail unless you're doing something wrong..
masterex567 said:
What does Odin say when you try to flash the stock rom?
Format each and everything apart from sdcard in cwm and try.
Odin shouldn't fail unless you're doing something wrong..
Click to expand...
Click to collapse
no, odin flash it successfully, but bootloop persists.. i ´ve done all the "formats" you suggested, and then flashed stock rom via odin, but same problem...
thanks
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ4_I9300TPHDLJ1_I9300XXDLID_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> recovery.img
<ID:0/009> modem.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
Hm.
try getting warranty from samsung.
They might take a look.
from the looks of this, it seems more complicated.
because if odin flashed everything succesfullly. There can't be any problem.
Try getting another odin package and see...
masterex567 said:
Hm.
try getting warranty from samsung.
They might take a look.
from the looks of this, it seems more complicated.
because if odin flashed everything succesfullly. There can't be any problem.
Try getting another odin package and see...
Click to expand...
Click to collapse
no need xD i flashed an ICS stock rom and phone is alive again xD ufff.....
thanks
antunes20 said:
no need xD i flashed an ICS stock rom and phone is alive again xD ufff.....
thanks
Click to expand...
Click to collapse
Haha.
A problem like that would have scared the hell out of me too.
Take a nandroid backup as well now.
And, you can go on and flash LL5. :high-five:
antunes20 said:
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
Click to expand...
Click to collapse
Hi I think I have the same problem here
can you give me the link to the ICS rom that you use to fix your problem
wydarwin said:
Hi I think I have the same problem here
can you give me the link to the ICS rom that you use to fix your problem
Click to expand...
Click to collapse
Check here and pick your region / country
http://forum.xda-developers.com/showthread.php?t=1646610
antunes20 said:
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
Click to expand...
Click to collapse
factory reset usually helps when bootloop occur.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
Hey guys,
I recently flashed null_24 custom rom and after rebooting the phone it got stuck at the Samsung Galaxy s3 logo.
When trying to enter CWM (Touch recovery) i get a black screen and it seems to freeze.
I was able to enter download mode and tried to flash stock rom via Odin.
I tried rebooting my PC and using different USB ports but it failed every time...
Then i tried to recover my phone via kies but it got stuck at 0%
Is there anything i can do or is my phone broken for good?
I could use any help!
Thanks in advance
You need to give more detail.
Do you have an internation or usa s3?
What error did you get with odin?
If you flashed a rom image for a different phone then your phone is probably bricked. Likewise if you get pit errors in odin. If thats the case then it needs a repair job.
Sent from my GT-I9300 using xda premium
I have an international s3
I flashed null_ roms before, and hat no problems with them. But null_24 didn't let me boot and froze my cwm.
Here's my Odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The log doesnt look good. I would not mess with it until somebody more knowledgable can help.
If you try things like pit files you may make it beyond repair by yourself and need to send it somewhere for repair.
Sorry I cant really help you further and I hope you get it sorted.
Sent from my GT-I9300 using xda premium
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Theshawty said:
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Is there anything else I can do?
JonOssim said:
Is there anything else I can do?
Click to expand...
Click to collapse
No looks like you broke it and need a service centre .
jje
JonOssim said:
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Click to expand...
Click to collapse
Nope. Service Center it is.
Sent from my GT-I9300 using xda app-developers app
Is there any way I can reset the flash counter via download mode?
And is there any way to retrieve my data on my internal sd?
So I guess it's a no?
JonOssim said:
So I guess it's a no?
Click to expand...
Click to collapse
You could try install a kernel only in odin. One with a recovery. Speedmod maybe? This may give you your recovery back and odin might let it Flash.
Worth a try
Drew071
Sent from my GT-I9300 using xda app-developers app
Okay thanks!
I'll try it when i get home
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
This is so frustrating!
I tried flashing the kernel hundred times but i get the same errorlog as before...
I'll try to flash older firmwares like you said ratatattata
ratatattata said:
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
Click to expand...
Click to collapse
hey, did you have the same odin error log as me??
JonOssim said:
hey, did you have the same odin error log as me??
Click to expand...
Click to collapse
Yes, I believe it was just that log.
I am using a Samsung Galaxy S2 GT-I9100G. Recently flashed Ressurrection Remix and it worked perfectly on the rooted phone. Then, gyroscope calibration did not work so I decided to flash a stock rom ( ICS 4.0.3 DXL6 Malaysia ) . After the flashing, the phone is stuck at the Samsung Logo.
I went to Clockword Recovery, and when I pressed install from sd-card, it says 'error:can't mount sdcard) So, i can't install back Ressurrection Remix.
What do I do now!?
Factory reset then reboot
andrewwright said:
Factory reset then reboot
Click to expand...
Click to collapse
I cant enter recovery mod. The screen is stuck at a phone>yellow triangle>pc screen
What happened from first post. You said in cwm recovery fails to mount sd?
andrewwright said:
What happened from first post. You said in cwm recovery fails to mount sd?
Click to expand...
Click to collapse
After the 'fail to mount sd' thing, i tried flashing stock ICS 4.0.3.(Malaysia) on the phone via ODIN 1.85.
Then the process failed and now it is stuck at the said screen. Recovery is unaccessable...
Keep trying to flash with Odin. Do what you did before to flash stock
andrewwright said:
Keep trying to flash with Odin. Do what you did before to flash stock
Click to expand...
Click to collapse
~Notes~
1.The Ressurrection Remix rom was installed through the ClockWork Recovery process.
2.I already tried flashing the stock rom many times but it failed everytime...
3.Can you recommend any stock rom I should install or anything else to be downloaded for Odin 1.85?
No only stock firmware with Odin. Try different version of Odin. Make sure kies is shut down completely
---------- Post added at 12:32 AM ---------- Previous post was at 12:27 AM ----------
Or Flash say philz tar kernel. That will give you cwm Bk that's 4.1.2 kernel. Flash siyah v4 for ics cwm
andrewwright said:
No only stock firmware with Odin. Try different version of Odin. Make sure kies is shut down completely
Click to expand...
Click to collapse
This is what it says in odin. Kies is shut down.
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDXLP6_I9100GOLBLP6_I9100GDXLP6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Iv never used Odin so pass on that. @Hopper8 @gastonw can you jump in here?? If you was in cwm I can help
andrewwright said:
Iv never used Odin so pass on that. @Hopper8 @gastonw can you jump in here?? If you was in cwm I can help
Click to expand...
Click to collapse
Somehow managed to access CWM now...
Tried factory reset and reboot. Didn't work...
Can you flash Rom. Can you get to ext sd? If you can and int sd wont mount put Rom on ext sd with Pc put Bk in phone and flash flash flash
Wont reboot as no Rom on phone I think
---------- Post added at 12:49 AM ---------- Previous post was at 12:45 AM ----------
Also not firmware put rr on ext sd not firmware
andrewwright said:
Can you flash Rom. Can you get to ext sd? If you can and int sd wont mount put Rom on ext sd with Pc put Bk in phone and flash flash flash
Wont reboot as no Rom on phone I think
---------- Post added at 12:49 AM ---------- Previous post was at 12:45 AM ----------
Also not firmware put rr on ext sd not firmware
Click to expand...
Click to collapse
I don't see any external sd in the recovery.
Pressing internal sd says 'can't mount sd card' , . Same goes for everything else.
What cwm do you have?
andrewwright said:
What cwm do you have?
Click to expand...
Click to collapse
CWM-based Recovery v5.5.0.4
Update recovery needed. Flash siyah v6 through Odin and then go Bk to recovery. Then flash Rom.
I would go stock before going back to custom.
Sent from the little guy
andrewwright said:
Update recovery needed. Flash siyah v6 through Odin and then go Bk to recovery. Then flash Rom.
Click to expand...
Click to collapse
Hey Andrew. I wanted to say thanks for providing all those help you gave me.
I just re-flashed CWM, used an external sd with RR in it like you said, and installed it through Recovery.
Everything seems to be working now, and I'm in the signing-in stuff and first-time user wizard. Thanks again!
All these troubles for Gyroscope Calibration. RR doesn't have that, and I cant calibrate my screen. But... i can live with that.
You would @gastonw hehe firmware fan Haha glad you sorted it out mate. No problem with the help. This is what xda is about :thumbup: also flash a different Rom. There are loads out there. I like pacman tbh or mr1 aokp. Some like stock firmware but I think they work for Sam lol
DeanVantis said:
Hey Andrew. I wanted to say thanks for providing all those help you gave me.
I just re-flashed CWM, used an external sd with RR in it like you said, and installed it through Recovery.
Everything seems to be working now, and I'm in the signing-in stuff and first-time user wizard. Thanks again!
All these troubles for Gyroscope Calibration. RR doesn't have that, and I cant calibrate my screen. But... i can live with that.
Click to expand...
Click to collapse
The outcome of this stupid journey of mine:
I can't acess my USB storage worth of 11gb... Can someone help? (I'm an official idiot.)
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.