hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
harpal singh said:
hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
Click to expand...
Click to collapse
ODIN REPORT.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Y r u using .pit file?
domnic79 said:
Y r u using .pit file?
Click to expand...
Click to collapse
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
harpal singh said:
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
Click to expand...
Click to collapse
No. From where did u get the multi package firmware?
recovery problem wid ace cream v.1
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
dylan.james1947 said:
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
Click to expand...
Click to collapse
Download stock firmware from HERE & flash it. Do not use .pit file.
domnic79 said:
No. From where did u get the multi package firmware?
Click to expand...
Click to collapse
no it is not a multi package firmware.... it is one file packege.... .S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5
and i put it in PDA section
thaks
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
thanks man your help it is back to normal:good
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
I have a very similar problem. I tried to flash a ROM on my ace-i and got stuck at the boot logo. I cant get into recovery mode. The download mode works fine so, I tried to flash the stock rom using odin but the phone is not even connecting, I think it is because I have USB debugging off on the phone. I am not sure what to do! I have attached a pic of what i have done on odin. I know the ID:COM thing should be yellow but its not! I have the USB driver also installed!
Galaxy Ace Not entering Recovery mode
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
RamEEz said:
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
Click to expand...
Click to collapse
Go into download mode and flash stock rom using Odin.
Sent from my iPad using Tapatalk - now Free
Envy-X said:
Go into download mode and flash stock rom using Odin.
Click to expand...
Click to collapse
Did that., tried a few different ones as well. downloaded them from samfirmware, still its locked.
Related
Hello, unfortunately my phone took the opportunity to have the power button jam and cause it to loop on and off whilst it was charging for roughly 7 hours. The phone now hangs at the "Samsung Galaxy SIII" Screen.
I've tried flashing a stock rom via Odin , however i get the error "There is no PIT parition."
Is there any other workaway around this?
I have read around the forum and tried different usb ports but to no avail.
Are you sure you didn't tick to use PIT?
If not, your partition table may be broken and you'll need the one on samfirmware.com to revive it.
Sent from my GT-I9300 using xda premium
Where can i get the partition table at samfirmware.com?
It it in the forums or somewhere on the front page? I can't seem to find it sorry.
Would i also just re-partition it with the PIT file on Odin?
Hello! I have found the partition file for the 16gb Galaxy S3 however i receive a new error.
It says :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
How do i fix this? Thank you and sorry.
If it was the correct PIT file used then it looks like either a JTag repair ( cheaper) or a service centre repair .
jje
Riionten said:
Hello! I have found the partition file for the 16gb Galaxy S3 however i receive a new error.
It says :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
How do i fix this? Thank you and sorry.
Click to expand...
Click to collapse
try to fix with 3part firmware and tick re-partition use the pit file that comes in the package.
download it here http://narod.ru/disk/51312212001.a4.../I9300XXALEF_I9300XXLEF_I9300OXEALE4.rar.html
Just tried to use the 3 part firmware.
I still get the PIT error.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALEF_611327_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLEF_REV02_REV04_CL1147871.tar.md5 is valid.
<OSM> CSC_OXE_I9300OXEALE4_CL606160_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
--------------------------------------------------------------------------
What is a JTag and where can i have my phone repaired? Sorry still a beginner.
Here: http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
Two seconds to Google There may be others, search
NEVER tick repartition again
Sent from my GT-P6810 using xda premium
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
mariosraptor said:
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
maybe you are right but i have never encountered this. i have usually been forced to S1 and S2 after wrong bootloader writting. they could not be booted so had to fix them via jtag.
---------- Post added at 04:56 PM ---------- Previous post was at 04:24 PM ----------
if you are skillfull enough you can try this http://forum.xda-developers.com/showthread.php?t=1731255
you will need another same phone and the multiple tars that i told you to download.
bear in mind that i will not be held responsible for any further damage if any occurs,
i have not made this nor i have tried it. this absolutely Samsung made. if you feel that it is over your head DO NOT TRY IT!!!!!!!!!!!!
UpInTheAir said:
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
Click to expand...
Click to collapse
That's true, but in extremely rare cases that happened
beginner : phone hang at samsung galaxy siii gt-19300
hye please help..i didnt do anything to my phone. it hang at samsung logo even after vol up + home + power..please help me...
up here! same happend to a friend, and nothing working, any ideas?
javituh said:
up here! same happend to a friend, and nothing working, any ideas?
Click to expand...
Click to collapse
JTag repair is cheaper than a service centre repair .
jje
UpInTheAir said:
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
Click to expand...
Click to collapse
@up in the air
hi! can i directly flash the boot recovery file thru odins selecting it in "bootloader" option? as i have a SIII which just boots till samsung galaxy sIII and thats all never went front! it does go in boot-loader mode, but not in recovery mode!
i did a reset userdata and cache thru recovery when i forgot my pattern lock, since then its not booted! ive tried everything, bbut the problem is still the same!
and when u boot the phone in boot-loader mode to flash with odin i get these;
"
odin mode
product name: gt-19300
custom Binary download: yes (7 counts)
current Binary: samsung official
system status: custom
"
pls share any new solution's to fix these kind of problems! iam having sleepless nights due to this!
WBR
ReyTech.
ReyTech said:
@up in the air
hi! can i directly flash the boot recovery file thru odins selecting it in "bootloader" option? as i have a SIII which just boots till samsung galaxy sIII and thats all never went front! it does go in boot-loader mode, but not in recovery mode!
i did a reset userdata and cache thru recovery when i forgot my pattern lock, since then its not booted! ive tried everything, bbut the problem is still the same!
and when u boot the phone in boot-loader mode to flash with odin i get these;
"
odin mode
product name: gt-19300
custom Binary download: yes (7 counts)
current Binary: samsung official
system status: custom
"
pls share any new solution's to fix these kind of problems! iam having sleepless nights due to this!
WBR
ReyTech.
Click to expand...
Click to collapse
You can flash stock recovery through Odin - PDA
OR
BACKUP data to PC and flash full firmware package with Odin. Follow Intratech guide here : http://forum.xda-developers.com/showthread.php?t=1671969
You can download firmware packages from XDA (Intratech etc), samsung-updates.com or samfirmware.com
Then re-root and flash CWM recovery
Sent from my GT-I9300 using xda premium
mariosraptor said:
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
You sir took away a lot of my worries!!! because i already was thinking about just buying a new s3, but it does enter download mode, so YES there is hope! :laugh: (it is more of histarical laugh, but yes hope indeed)
---------- Post added at 09:30 AM ---------- Previous post was at 09:19 AM ----------
UpInTheAir said:
You can flash stock recovery through Odin - PDA
OR
BACKUP data to PC and flash full firmware package with Odin. Follow Intratech guide here : http://forum.xda-developers.com/showthread.php?t=1671969
You can download firmware packages from XDA (Intratech etc), samsung-updates.com or samfirmware.com
Then re-root and flash CWM recovery
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I really tried to figure out how but got stuck, how exactly do you put your phone into stock recovery mode trough odin?
George1195 said:
You sir took away a lot of my worries!!! because i already was thinking about just buying a new s3, but it does enter download mode, so YES there is hope! :laugh: (it is more of histarical laugh, but yes hope indeed)
---------- Post added at 09:30 AM ---------- Previous post was at 09:19 AM ----------
I really tried to figure out how but got stuck, how exactly do you put your phone into stock recovery mode trough odin?
Click to expand...
Click to collapse
You don't need to get into recovery when using Odin. You need download mode. But any search would have clarified that
Power off and press :
Vol down + home + power (keep depressed until download mode)
Same for recovery (Vol up instead)
Sent from my GT-I9300 using xda premium
UpInTheAir said:
You don't need to get into recovery when using Odin. You need download mode. But any search would have clarified that
Power off and press :
Vol down + home + power (keep depressed until download mode)
Same for recovery (Vol up instead)
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I think his problem is that he can't enter recovery, he can only enter download mode. He's asking if there's a way he can enter recovery mode through Odin (by flashing it?) not the other way around.
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.
My Mum's Ace GT-S5839i seems to be stuck in a bootloop after it froze when she was playing a game.
I've been trying to recover it using Odin, but I'm not having any luck. These are the steps I tried:
-Downloaded Odin v3.09
-Downloaded the stock firmware (from Sammobile.com)
-Opened Odin
-Put phone into Download Mode
-Connected phone
-Press AP, and selected the firmware file
-Press start
It then fails. This is the message list:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iXXLK2_S5839iH3GLC2_S5839iNELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestions as to what I should try? I've never used Odin before, so I'm unsure of what to do.
Thanks
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
go to this link for odin 1.87.
https://www.google.co.in/url?sa=t&r...aU2OI67Ynp8O_Ms0b-WWQ&bvm=bv.1355534169,d.bmk
go to this link for stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
go to this link for odin 1.87.
https://www.google.co.in/url?sa=t&r...aU2OI67Ynp8O_Ms0b-WWQ&bvm=bv.1355534169,d.bmk
go to this link for stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply. I've got a couple of questions, though.
Firstly, it's a GT-S5839i, not a 5830i, so I assume I can't use the 5380i ROM in the link you posted?
Secondly, does it specifically have to be Odin V1.85? I was using the latest version (V3.09)
Thanks.
Egg Chaser said:
Thanks for the reply. I've got a couple of questions, though.
Firstly, it's a GT-S5839i, not a 5830i, so I assume I can't use the 5380i ROM in the link you posted?
Secondly, does it specifically have to be Odin V1.85? I was using the latest version (V3.09)
Thanks.
Click to expand...
Click to collapse
U can flash s5830i roms on your device also.. And use 1.87 for that link rom which i given
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
U can flash s5830i roms on your device also.. And use 1.87 for that link rom which i given
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Ok, I've followed all of the instructions you've posted, but it's still stick on a bootloop.
Any suggestions?
Egg Chaser said:
Ok, I've followed all of the instructions you've posted, but it's still stick on a bootloop.
Any suggestions?
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
mahithm said:
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
Click to expand...
Click to collapse
For some reason, after running Odin, the phone would say "E:failed to mount /data (invalid argument). After a bit of researching I found some different files that seemed to work. Not sure what the difference was, but they did the trick.
Thanks for pointing me in the right way, though. I've never had to recover a phone before, so I really appreciate the help.
Egg Chaser said:
For some reason, after running Odin, the phone would say "E:failed to mount /data (invalid argument). After a bit of researching I found some different files that seemed to work. Not sure what the difference was, but they did the trick.
Thanks for pointing me in the right way, though. I've never had to recover a phone before, so I really appreciate the help.
Click to expand...
Click to collapse
Glad I could help buddy!
Egg Chaser said:
For some reason, after running Odin, the phone would say "E:failed to mount /data (invalid argument). After a bit of researching I found some different files that seemed to work. Not sure what the difference was, but they did the trick.
Thanks for pointing me in the right way, though. I've never had to recover a phone before, so I really appreciate the help.
Click to expand...
Click to collapse
I'm also having problems with my S5839i, and I'm also having trouble flashing the firmware with Odin 3.09.
Can you tell me what you ended up doing, and what files you used?
OhHowWeLaughed said:
I'm also having problems with my S5839i, and I'm also having trouble flashing the firmware with Odin 3.09.
Can you tell me what you ended up doing, and what files you used?
Click to expand...
Click to collapse
Flash stock firmware from odin 1.87..
Read all post of this thread
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Flash stock firmware from odin 1.87..
Read all post of this thread
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I will try your method, but the OP said that it didn't work, and that he had to use different files. I want to know what different files he used.
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
mahithm said:
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
Click to expand...
Click to collapse
I can't access recovery even after flashing :C just tried it.
Buckstrat said:
I can't access recovery even after flashing :C just tried it.
Click to expand...
Click to collapse
Are you getting bootloops or is it stuck at the bootscreen?
mahithm said:
Are you getting bootloops or is it stuck at the bootscreen?
Click to expand...
Click to collapse
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Buckstrat said:
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Click to expand...
Click to collapse
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
mahithm said:
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Buckstrat said:
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Click to expand...
Click to collapse
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
mahithm said:
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Already tried this one i think is first one i followed.. Still nothing :C
Logg from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_WHLA1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLA1.tar.md5 is valid.
<OSM> CSC_S5830M_UUBLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> HEDGE_NVRAM8_RF_LE.bin
<ID:0/003> sysparm_dep.img
<ID:0/003> boot.img
<ID:0/003> param.lfs
<ID:0/003> system.img
<ID:0/003> sbl.bin
<ID:0/003> userdata.img
<ID:0/003> BcmCP.img
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Buckstrat said:
Already tried this one i think is first one i followed.. Still nothing :C
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Click to expand...
Click to collapse
Try the instructions from here. Do post the result. Hope I Helped
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
mahithm said:
Try the instructions from here. Do post the result. Hope I Helped
Click to expand...
Click to collapse
Done, i'm not making mistakes in flashing :C
eiPeiDweP said:
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
Just tried this one nothing :crying:
Update:
I've got into recovery, rooted and flashes cwm. Did the wiped and flashed again, stil nothing also flashed a rom from CWM and still nothing... Come on guys this cellphone is from my gf and i'm a poor virgin guy who wants to have sex.
Buckstrat said:
Done, i'm not making mistakes in flashing :C
Click to expand...
Click to collapse
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
mahithm said:
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
Click to expand...
Click to collapse
Still nothing bro :crying:.. I just noticed i got over 3gb on different firmwares for the S5830 :cyclops::cyclops:
Bump
Update
Buckstrat said:
Bump
Click to expand...
Click to collapse
Buckstrat said:
Update
Click to expand...
Click to collapse
As much as I want to help you, I'm out of idea's But I'm sure the following people will be able to help you @Hitesh2626 and @amolgosavi (sorry for tagging you two but this guy needs your help).
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Hitesh2626 said:
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Click to expand...
Click to collapse
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Buckstrat said:
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Click to expand...
Click to collapse
Don't flash Ace's firmware it will hard brick then you can't restore it by your self you need to give it to Service Center,
And do split by your self and make a wipe package and flash it follow these video
Back in the days I had a emmc problem with a Note 4. I made a image from a working device and booted it up from a sd card. Since s6 edge doen't have a sd slot I wonder how to restore it.
So I can enter Download Mode but not Recovery mode. It's a SM-G925F Belgian model. G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar is what I used with Odin but no luck. Also I tried with SmartSwitch with model and serial number and so but no luck either. After that I tried to flash twrp-3.1.1-0-zerolte.img.tar but still no Recovery Mode. The device turns on, schows the logo and reboots. Always bootloop. This happened after a week of using the new software update.
FYI: Not rooted
dyasten said:
Back in the days I had a emmc problem with a Note 4. I made a image from a working device and booted it up from a sd card. Since s6 edge doen't have a sd slot I wonder how to restore it.
So I can enter Download Mode but not Recovery mode. It's a SM-G925F Belgian model. G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar is what I used with Odin but no luck. Also I tried with SmartSwitch with model and serial number and so but no luck either. After that I tried to flash twrp-3.1.1-0-zerolte.img.tar but still no Recovery Mode. The device turns on, schows the logo and reboots. Always bootloop. This happened after a week of using the new software update.
FYI: Not rooted
Click to expand...
Click to collapse
You can use an OTG flash drive l
Same as you would sd card. What error did you get in odin when flashing the firmware you posted?
dyasten said:
Back in the days I had a emmc problem with a Note 4. I made a image from a working device and booted it up from a sd card. Since s6 edge doen't have a sd slot I wonder how to restore it.
So I can enter Download Mode but not Recovery mode. It's a SM-G925F Belgian model. G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar is what I used with Odin but no luck. Also I tried with SmartSwitch with model and serial number and so but no luck either. After that I tried to flash twrp-3.1.1-0-zerolte.img.tar but still no Recovery Mode. The device turns on, schows the logo and reboots. Always bootloop. This happened after a week of using the new software update.
FYI: Not rooted
Click to expand...
Click to collapse
i had a note 4 do the same thing
as previous poster said u should be able to do the same fix with a otg and flash drive
I already have access to Download Mode but not Recovery Mode. What pit file should I use?
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Also when I flash with Odin it fails. When I delete Hidden.img from the tar the flash pass but still no Recovery Mode. Phone keeps retarting, showing logo, restarts, bootloop, ...
TheMadScientist420 said:
i had a note 4 do the same thing
as previous poster said u should be able to do the same fix with a otg and flash drive
Click to expand...
Click to collapse
I just remember I had to do the sd card thing because no download mode was working. But here DM works but no Recovery Mode
callumbr1 said:
You can use an OTG flash drive l
Same as you would sd card. What error did you get in odin when flashing the firmware you posted?
Click to expand...
Click to collapse
This error do I get when flashing without deleting Hidden.img
HTML:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dyasten said:
I already have access to Download Mode but not Recovery Mode. What pit file should I use?
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Also when I flash with Odin it fails. When I delete Hidden.img from the tar the flash pass but still no Recovery Mode. Phone keeps retarting, showing logo, restarts, bootloop, ...
Click to expand...
Click to collapse
What firmware are you trying to flash and what region? Tell me this and I can tell you which PIT file
callumbr1 said:
What firmware are you trying to flash and what region? Tell me this and I can tell you which PIT file
Click to expand...
Click to collapse
G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar
dyasten said:
G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar
Click to expand...
Click to collapse
Before you flash a pit file (as they can be very dangerous) try again to remove hidden.img. extract firmware with 7zip or something similar. Remove hidden.img and then repack. Then flash.
Or
Flash a different firmware
callumbr1 said:
Before you flash a pit file (as they can be very dangerous) try again to remove hidden.img. extract firmware with 7zip or something similar. Remove hidden.img and then repack. Then flash.
Click to expand...
Click to collapse
I did this yesterday and it passes in Odin. I unticked the "restart when done" thing in options. I restarted manually by power + home + volume down. When screen was off I immediately pressed power + home + volume up but it still doesn't go into Recovery Mode
dyasten said:
I did this yesterday and it passes in Odin. I unticked the "restart when done" thing in options. I restarted manually by power + home + volume down. When screen was off I immediately pressed power + home + volume up but it still doesn't go into Recovery Mode
Click to expand...
Click to collapse
Try a different firmware. Firmware is probably corrupted.
callumbr1 said:
Try a different firmware. Firmware is probably corrupted.
Click to expand...
Click to collapse
I downloaded 3 firmwares to test:
7: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU5EQD4/173643
6.0.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU4DPGZ/88414
5.1.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU3COI9/57688
It stays the same. When I restore with SmartSwitch it also says it's done but still in bootloop...
dyasten said:
I downloaded 3 firmwares to test:
7: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU5EQD4/173643
6.0.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU4DPGZ/88414
5.1.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU3COI9/57688
It stays the same. When I restore with SmartSwitch it also says it's done but still in bootloop...
Click to expand...
Click to collapse
https://www.sammobile.com/forum/showthread.php?t=30136
Look here for pit. Make sure you only flash the one for your device/firmware
callumbr1 said:
https://www.sammobile.com/forum/showthread.php?t=30136
Look here for pit. Make sure you only flash the one for your device/firmware
Click to expand...
Click to collapse
Thanks for the link. How to know the right model. I only know that's it's a SM-G925F from Belgium (PRO)