Back in the days I had a emmc problem with a Note 4. I made a image from a working device and booted it up from a sd card. Since s6 edge doen't have a sd slot I wonder how to restore it.
So I can enter Download Mode but not Recovery mode. It's a SM-G925F Belgian model. G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar is what I used with Odin but no luck. Also I tried with SmartSwitch with model and serial number and so but no luck either. After that I tried to flash twrp-3.1.1-0-zerolte.img.tar but still no Recovery Mode. The device turns on, schows the logo and reboots. Always bootloop. This happened after a week of using the new software update.
FYI: Not rooted
dyasten said:
Back in the days I had a emmc problem with a Note 4. I made a image from a working device and booted it up from a sd card. Since s6 edge doen't have a sd slot I wonder how to restore it.
So I can enter Download Mode but not Recovery mode. It's a SM-G925F Belgian model. G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar is what I used with Odin but no luck. Also I tried with SmartSwitch with model and serial number and so but no luck either. After that I tried to flash twrp-3.1.1-0-zerolte.img.tar but still no Recovery Mode. The device turns on, schows the logo and reboots. Always bootloop. This happened after a week of using the new software update.
FYI: Not rooted
Click to expand...
Click to collapse
You can use an OTG flash drive l
Same as you would sd card. What error did you get in odin when flashing the firmware you posted?
dyasten said:
Back in the days I had a emmc problem with a Note 4. I made a image from a working device and booted it up from a sd card. Since s6 edge doen't have a sd slot I wonder how to restore it.
So I can enter Download Mode but not Recovery mode. It's a SM-G925F Belgian model. G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar is what I used with Odin but no luck. Also I tried with SmartSwitch with model and serial number and so but no luck either. After that I tried to flash twrp-3.1.1-0-zerolte.img.tar but still no Recovery Mode. The device turns on, schows the logo and reboots. Always bootloop. This happened after a week of using the new software update.
FYI: Not rooted
Click to expand...
Click to collapse
i had a note 4 do the same thing
as previous poster said u should be able to do the same fix with a otg and flash drive
I already have access to Download Mode but not Recovery Mode. What pit file should I use?
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Also when I flash with Odin it fails. When I delete Hidden.img from the tar the flash pass but still no Recovery Mode. Phone keeps retarting, showing logo, restarts, bootloop, ...
TheMadScientist420 said:
i had a note 4 do the same thing
as previous poster said u should be able to do the same fix with a otg and flash drive
Click to expand...
Click to collapse
I just remember I had to do the sd card thing because no download mode was working. But here DM works but no Recovery Mode
callumbr1 said:
You can use an OTG flash drive l
Same as you would sd card. What error did you get in odin when flashing the firmware you posted?
Click to expand...
Click to collapse
This error do I get when flashing without deleting Hidden.img
HTML:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dyasten said:
I already have access to Download Mode but not Recovery Mode. What pit file should I use?
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Also when I flash with Odin it fails. When I delete Hidden.img from the tar the flash pass but still no Recovery Mode. Phone keeps retarting, showing logo, restarts, bootloop, ...
Click to expand...
Click to collapse
What firmware are you trying to flash and what region? Tell me this and I can tell you which PIT file
callumbr1 said:
What firmware are you trying to flash and what region? Tell me this and I can tell you which PIT file
Click to expand...
Click to collapse
G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar
dyasten said:
G925FXXU5EQD4_G925FPRO5EQE1_G925FXXU5EQCD_HOME.tar
Click to expand...
Click to collapse
Before you flash a pit file (as they can be very dangerous) try again to remove hidden.img. extract firmware with 7zip or something similar. Remove hidden.img and then repack. Then flash.
Or
Flash a different firmware
callumbr1 said:
Before you flash a pit file (as they can be very dangerous) try again to remove hidden.img. extract firmware with 7zip or something similar. Remove hidden.img and then repack. Then flash.
Click to expand...
Click to collapse
I did this yesterday and it passes in Odin. I unticked the "restart when done" thing in options. I restarted manually by power + home + volume down. When screen was off I immediately pressed power + home + volume up but it still doesn't go into Recovery Mode
dyasten said:
I did this yesterday and it passes in Odin. I unticked the "restart when done" thing in options. I restarted manually by power + home + volume down. When screen was off I immediately pressed power + home + volume up but it still doesn't go into Recovery Mode
Click to expand...
Click to collapse
Try a different firmware. Firmware is probably corrupted.
callumbr1 said:
Try a different firmware. Firmware is probably corrupted.
Click to expand...
Click to collapse
I downloaded 3 firmwares to test:
7: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU5EQD4/173643
6.0.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU4DPGZ/88414
5.1.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU3COI9/57688
It stays the same. When I restore with SmartSwitch it also says it's done but still in bootloop...
dyasten said:
I downloaded 3 firmwares to test:
7: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU5EQD4/173643
6.0.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU4DPGZ/88414
5.1.1: https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/PRO/download/G925FXXU3COI9/57688
It stays the same. When I restore with SmartSwitch it also says it's done but still in bootloop...
Click to expand...
Click to collapse
https://www.sammobile.com/forum/showthread.php?t=30136
Look here for pit. Make sure you only flash the one for your device/firmware
callumbr1 said:
https://www.sammobile.com/forum/showthread.php?t=30136
Look here for pit. Make sure you only flash the one for your device/firmware
Click to expand...
Click to collapse
Thanks for the link. How to know the right model. I only know that's it's a SM-G925F from Belgium (PRO)
Related
hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
harpal singh said:
hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
Click to expand...
Click to collapse
ODIN REPORT.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Y r u using .pit file?
domnic79 said:
Y r u using .pit file?
Click to expand...
Click to collapse
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
harpal singh said:
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
Click to expand...
Click to collapse
No. From where did u get the multi package firmware?
recovery problem wid ace cream v.1
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
dylan.james1947 said:
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
Click to expand...
Click to collapse
Download stock firmware from HERE & flash it. Do not use .pit file.
domnic79 said:
No. From where did u get the multi package firmware?
Click to expand...
Click to collapse
no it is not a multi package firmware.... it is one file packege.... .S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5
and i put it in PDA section
thaks
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
thanks man your help it is back to normal:good
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
I have a very similar problem. I tried to flash a ROM on my ace-i and got stuck at the boot logo. I cant get into recovery mode. The download mode works fine so, I tried to flash the stock rom using odin but the phone is not even connecting, I think it is because I have USB debugging off on the phone. I am not sure what to do! I have attached a pic of what i have done on odin. I know the ID:COM thing should be yellow but its not! I have the USB driver also installed!
Galaxy Ace Not entering Recovery mode
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
RamEEz said:
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
Click to expand...
Click to collapse
Go into download mode and flash stock rom using Odin.
Sent from my iPad using Tapatalk - now Free
Envy-X said:
Go into download mode and flash stock rom using Odin.
Click to expand...
Click to collapse
Did that., tried a few different ones as well. downloaded them from samfirmware, still its locked.
I own a Orange Samsung S2 i9100 handset. This was working without problem until this morning where it was stuck on bootscreen. Recovery mode does not work.
I tried to update firmware using Odin 3.07 however this does not work. It fails to install.
I am now stuck with the message "Firmware upgrade encountered an error".
I cannot access SD card so rooting etc seems unlikely.
Any ideas?
Win 8 Machine
i9100
ORA-I9100XWLSY-20130606160421
Check out @Hopper8 thread about odin :thumbup:
Thanks.
I assume you are referring to this thread ( [GUIDE][Troubleshoot a failed Odin flash] )?
http://forum.xda-developers.com/showthread.php?t=2345831
I have tried recovering with the two most applicable firmware packages below. I do not know what others to try. I don't think I can use custom packages as I cannot access my SD Card?
http://www.sammobile.com/firmwares/2/
GT-I9100 Galaxy S II
PDA: I9100XWLSY
CSC: I9100ORALS8
MODEM: I9100BVLS4
Added: 2013-06-05
GT-I9100 Galaxy S II
PDA: I9100XWLSW
CSC: I9100XEULS5
MODEM: I9100XXMS2
Added: 2013-05-29
Odin does recognize my phone but each PDA update fails... Kies is installed but not running. Phone still can only go download mode and due to failed Odin update now shows no boot screen (only firmware fail message). I cnanot restore on Kies as did not use this PC before with phone.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSY_I9100BVLS4_I9100ORALS8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS.. *** At this point I click start
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) *** Odin fails...
Have you tried to flash philz for recovery? May mount sd on flash. Or may be alliance rom does a tar version of its rom. Maybe that mite work. Dif version of odin may work to. Cable, reinstall drivers. What have you tried?
andrewwright said:
Have you tried to flash philz for recovery? May mount sd on flash. Or may be alliance rom does a tar version of its rom. Maybe that mite work. Dif version of odin may work to. Cable, reinstall drivers. What have you tried?
Click to expand...
Click to collapse
I have tried philz recovery steps however this also fails in Odin.
I have tried different usb ports and reinstalling drivers. However Odin can see the phone, so it may not be a USB driver/port issue.
The biggest hurdle is getting Odin to run the flash.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) *** Odin fails...
Original cable used? Have you read and tried all of whats in that thread?
andrewwright said:
Original cable used? Have you read and tried all of whats in that thread?
Click to expand...
Click to collapse
Original Samsung Cable.
Followed instructions in this thread using md5 files for i900?
http://forum.xda-developers.com/showthread.php?t=2201860
Odin packages instructions: Samsung Only
They come in the form of .tar.md5 file
boot into download mode
start odin3 and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
normally, phone should auto-reboot into recovery.
If it reboots into main system and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing the 3 buttons combo to for a reboot into recovery.You should see the new CWM
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
to remove yellow triangle, use TriangleAway
Click to expand...
Click to collapse
Whatever I do, Odin still seems to fall over at same place.
What do I need to perform a full factory reset? I take it use Odin to install firmware?
Try flashing JB leak firmware. It's a 3-part firmware which will wipe as it flashes. Google 'JB leak i9100 Samfirmware', it should be the first link.
Sent from a galaxy far, far away
Hopper8 said:
Try flashing JB leak firmware. It's a 3-part firmware which will wipe as it flashes. Google 'JB leak i9100 Samfirmware', it should be the first link.
Click to expand...
Click to collapse
This doesn't work. I have assumed from your suggestion that I use Odin to install firmware via Odin. This fails as well.
I now have a new SD Card I could use to load any software onto the device. However I can not get to the recovery mode screen at all (only download mode). Therefore have no idea what to do now!
I also think my phone is worse now - on download mode screen:
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: CUSTOM
Click to expand...
Click to collapse
What guide should I use to completely factory reset the phone?
How do I check if the phone memory is correctly partitioned?
Tried Odin and Kies to restore; and same issues as above. Feels like time for a new phone...
dmuk said:
Tried Odin and Kies to restore; and same issues as above. Feels like time for a new phone...
Click to expand...
Click to collapse
bro try the other odin version .....this happens to me once .....
remove the battery ,move to download mode , open odin, attach the phone before inserting the rom file in odin......
then flash it with crossed fingers......good luck:good:
niksyspidy said:
bro try the other odin version .....this happens to me once .....
remove the battery ,move to download mode , open odin, attach the phone before inserting the rom file in odin......
then flash it with crossed fingers......good luck:good:
Click to expand...
Click to collapse
What version? I have tried 1.85, 1.87, 3.04, 3.07 - all fail.
Can I use Kies to repair if I have not previous Kies backups?
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.
I have the i9300 but when I boot up into download mode it says PRODUCT NAME: SGH-T999 (not my model, though). I think this is because I accidently installed the SGH-T999 version of cyangomenod.
So to try to fix it, I used odin 3.07 and the
"I9300ZSEMC1"
stock rom file to try to put it back onto stock. Odin "stopped working" and crashed and I soft-bricked my phone (Firmware upgrade encountered an issue message at boot).
I tried again using I9300XXEMC3 stock rom, but odin 3.04 says
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And fails. My phone says "unsupported dev_type" in red.
Can I please get some guidance? I don't know what I did wrong. What rom should I flash with odin? Should I try to flash the SGH-T999 stock rom with odin?
zhinkk said:
I have the i9300 but when I boot up into download mode it says PRODUCT NAME: SGH-T999 (not my model, though). I think this is because I accidently installed the SGH-T999 version of cyangomenod.
So to try to fix it, I used odin 3.07 and the
"I9300ZSEMC1"
stock rom file to try to put it back onto stock. Odin "stopped working" and crashed and I soft-bricked my phone (Firmware upgrade encountered an issue message at boot).
Can I please get some guidance? I don't know what I did wrong. What rom should I flash with odin? Should I try to flash the SGH-T999 stock rom with odin?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2535367
Hope it help.
TheoDores said:
Try this: http://forum.xda-developers.com/showthread.php?t=2535367
Hope it help.
Click to expand...
Click to collapse
I tried following those instructions. I managed to flash the .PIT file. Now I don't see the error message at boot, my screen is just black. BUT I can "sorta" boot into recovery mode (starting recovery message shows for one second, then black screen again). So I'm still stuck.
I can STILL boot into download mode though. And if I try to use CF-Root Odin fails again (same error) and my phone says "unsupported_devtype".
Flash stock rom via Odin .
But flashing a wrong firmware for a different phone may well be a lot more than a soft brick
Did you also flash wrong recovery ???
JJEgan said:
Flash stock rom via Odin .
But flashing a wrong firmware for a different phone may well be a lot more than a soft brick
Did you also flash wrong recovery ???
Click to expand...
Click to collapse
Everytime I flash the stock rom odin fails and phone says "unsupported dev_type". In Download mode it says my phone model is T999, but it's actual GT-I9300.
And I don't think I did. I think I had clockwork mod recovery, I'm not too sure though.
You have flashed at least the T999 bootloader, which is why it says that in download mode. If flashing a full i9300 stock rom doesn't help then you'll need a new motherboard.
boomboomer said:
You have flashed at least the T999 bootloader, which is why it says that in download mode. If flashing a full i9300 stock rom doesn't help then you'll need a new motherboard.
Click to expand...
Click to collapse
That really depresses me. Are you sure this is the only solution? Because I remember when my phone WAS working I booted into download mode once and it said the same "T999 Model" and I could still use it. This only happened after I tried flashing the stock i9300 stock rom.
I think it's the cyanogenmod installer that flashed this T999 bootloader for me. When I used the cyanogenmod installer it detected my phone as a AT&T phone and I was dumb enough to click "install" thinking it would work for all galaxy S3's.
I think this guide is exactly what I need (since it restores bootloader), but I can't seem to complete all the steps: http://forum.xda-developers.com/showthread.php?t=2535367
I get to #5 but once I try to install CF-ROOT through odin it says the same unsupported dev type error on my phone.
This is the error I get when trying to use CF-ROOT through Odin3 v1.85:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
(along with the red "Unsupported dev_type" on my phone in download mode).
I think it was already rooted though, maybe someone could help me reinstall the recovery (cwm) so I can install the bootloader from that guide I just linked?
Best option is to try a rescue firmware, which might help:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=8215224728919566
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Best option is to try a rescue firmware, which might help:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=8215224728919566
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Will this delete my EFS? I remember I backed up efs with this guide: http://forum.xda-developers.com/showthread.php?t=1852255
I did: "adb reboot nvbackup"
By restoring to "complete" factory settings, won't this efs be deleted? Can I still backup my efs in my 'soft brick' mode I'm in?
Alright, I've tried using the rescure firmware and all the files, but every time I try I get it a FAIL on odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And my phone says in red "SECURE CHECK FAIL : PIT".
I've spent 12 hours on this now...
Did you try Kies yet?
Do you still have a custom recovery?
I'm not sure about that adb nvbackup you have done. As far as i know it's only for Qualcomm chipsets not Exynos. Maybe you have severely damaged the device. But try Kies first or if you still have root access with recovery try to flash the bootloader manually.
If everything fails contact the low level guys like @AdamOutler or @Entropy512. They might be your last hope.
DualJoe said:
Did you try Kies yet?
Do you still have a custom recovery?
I'm not sure about that adb nvbackup you have done. As far as i know it's only for Qualcomm chipsets not Exynos. Maybe you have severely damaged the device. But try Kies first or if you still have root access with recovery try to flash the bootloader manually.
If everything fails contact the low level guys like @AdamOutler or @Entropy512. They might be your last hope.
Click to expand...
Click to collapse
I tried Kies on two different computers, but whenever I connect my S3 it just says "connecting" forever and never connects to my phone. Tried solutions online, couldn't get it to work.
And I have root access, but can't boot into recovery (says "recovery booting" for a few seconds then goes black screen). So I don't know if I can flash the bootloader manually, unless I did it with odin.
And those seem like busy developers, would they really have time for me? I don't even know what I would ask. :S
Sorry I seem so clueless, I'm just upset/sad/confused/everything right now. Saved up for this phone for a while.
Try to flash the bootloader only. There are different ones. Maybe you need one that is not blacklisted if that's even possible.
Last option that comes to my mind is an external jtag flasher. Maybe you have a local service shop or similar in your area that could help with that.
DualJoe said:
Try to flash the bootloader only. There are different ones. Maybe you need one that is not blacklisted if that's even possible.
Last option that comes to my mind is an external jtag flasher. Maybe you have a local service shop or similar in your area that could help with that.
Click to expand...
Click to collapse
Hmm when I had a functional phone it said I had the ZSEMC1 stock rom, so the "bootLoader_ZSEMC1.tar.md5" flashed from odin should work? I got it off this thread: http://forum.xda-developers.com/showthread.php?t=2189063
But I don't know if I'm still on ZSEMC1 since I flashed XXEMC3 with odin (but I think it failed) and I got soft bricked.
What could go wrong? Could I hard brick it by installing that bootloader?
I have no clue but i think all I9300 bootloaders would be ok. Your problem probably is rather to find one that gets accepted. Try the latest one for I9300. There is a thread with different bootloaders somewhere here i guess.
Also try to flash a custom recovery like twrp or cwm. I'm not sure if official tools like odin have a separate bootloader check that prevents cross model flashing. No one really knows how you did that. Maybe it's necessary to be done with dd.
DualJoe said:
I have no clue but i think all I9300 bootloaders would be ok. Your problem probably is rather to find one that gets accepted. Try the latest one for I9300. There is a thread with different bootloaders somewhere here i guess.
Also try to flash a custom recovery like twrp or cwm. I'm not sure if official tools like odin have a separate bootloader check that prevents cross model flashing. No one really knows how you did that. Maybe it's necessary to be done with dd.
Click to expand...
Click to collapse
I tried the ZSEMC1 and XXEMC3 and XXEMG5 bootloaders from this thread and they didn't work: http://forum.xda-developers.com/showthread.php?t=2189063
(shows unsupported dev type)
How do I get the 'latest' boot loader? That thread is the only one I could really find.
And also I did try installing cwm through odin. It didn't "fail" but it doesn't work when I try to boot into recovery. I'm guessing this has to do with my locked bootloader?
Really don't know what to do at this point. :/
New motherboard if you have tried the fixes .
Check if 'adb shell' is working in recovery nevertheless. Maybe it's just a display issue in cwm. Also try twrp.
If all that fails go to a mobile shop near you asking for a jtag flash. It shouldn't be too expensive or something. Hardest part is probably to find one locally...
DualJoe said:
Check if 'adb shell' is working in recovery nevertheless. Maybe it's just a display issue in cwm. Also try twrp.
If all that fails go to a mobile shop near you asking for a jtag flash. It shouldn't be too expensive or something. Hardest part is probably to find one locally...
Click to expand...
Click to collapse
I tried cwm and twrp. They both install successfully on odin but have the same "recovery starting...." message and they don't work. I've tried connecting the USB when it's in this "recovery" mode but my computer doesn't detect it so I can't start up adb and interface with it.
And also, I doubt I'm going to be able to find any in northwest ohio.I wonder if this service is any good?
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Looks promising for $50.
Sorry I've been on this problem for so long guys, I'm just stubborn and can't get over the fact that it's a software brick and I need to replace hardware. :/
.pit file needed, Samsung Galaxy SHV-E210k 16GB, stuck on "Nand write start"
my galaxy s3 is stuck. it still can go to download mode by pressing volume down+home+ power button.
but in recovery mode it says "E: Failed to mount / system no such file or directory"
and when i tried to flash official rom with odin it says failed after Nand Write Start... please help me anyone i am very upset.
hence i have searched for pit file for my samsung galaxy s3 (SHV-E210k) 16 GB but i could not find this file so please help me, anyone who have pit file for this device or who is able to extract pit from running device.
What file is failing to flash? The Odin log may help determine the problem?
Tried using different USB cables and USB ports?
Screenshot added and odin log.
audit13 said:
What file is failing to flash? The Odin log may help determine the problem?
Tried using different USB cables and USB ports?
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E210KKTUKOA1_E210KKTTKOA1_E210KKTUKNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help.
The sboot.bin file is the bootloader. It's not flashing because the bootloader is not for your phone, the bootloader in the ROM is older than the bootloader in the phone, you need to try different USB cables, or different USB ports.
A pit file will not help because Odin is able to get the proper partition information from the phone.
audit13 said:
The sboot.bin file is the bootloader. It's not flashing because the bootloader is not for your phone, the bootloader in the ROM is older than the bootloader in the phone, you need to try different USB cables, or different USB ports.
A pit file will not help because Odin is able to get the proper partition information from the phone.
Click to expand...
Click to collapse
Should i download the other version of firmware or only i have to try bootloader file?
I have already tried different cables and USB ports.
I have also tried to flash Philz recovery it give error after " Nand Write Start ",
I cannot reset data from recovery mode because it says unable to mount no such file or directory.
please tell me the right steps to follow.
Download the latest ROM for the phone from updato.com or sammobile.com.
Recovery mode
audit13 said:
Download the latest ROM for the phone from updato.com or sammobile.com.
Click to expand...
Click to collapse
In recovery mode these errors are showing.
Can you tell me about that why these error are coming and why my mobile can't mount all storage like system, cache, recovery.
It's possible that the memory chip inside the phone is damaged.
If you can't flash a stock ROM using Odin, you can try finding a cell repair shop that can flash the ROM using a jtag cable or Octopus box.
audit13 said:
It's possible that the memory chip inside the phone is damaged.
If you can't flash a stock ROM using Odin, you can try finding a cell repair shop that can flash the ROM using a jtag cable or Octopus box.
Click to expand...
Click to collapse
Ohh ok
Stuck logo on olleh on s3 Korean
Hi everyone my galaxy s3 Korean set stuck on logo. I flash two official firmware from updato.com with odin but still stuck on logo . Plz help me out.
Amrit thapa4012 said:
Hi everyone my galaxy s3 Korean set stuck on logo. I flash two official firmware from updato.com with odin but still stuck on logo . Plz help me out.
Click to expand...
Click to collapse
After flashing the stock ROM, are you booting into recovery to perform a factory wipe?
hi any luck with this? i have my phone having similar issues with this failed to mount on all directories. any help will do.