I had installed CM 10.1 (Unofficial) for Galaxy Grand Duos.This one worked fine for me.
After that i i tried to install GENNXT ROM Android 4.2.2 for Grand.I tried wiping cache, data partitons etc. But No effect !!!
when i press the power button, The phone just shows "samsung galaxy grand logo" and reboots ...
Still iam able to revert to the CM 10.1 (Unofficial).
What will be the possible cause for the boot loop after installing GENNXT ROM Android 4.2.2.Please help me.!
For gennxt ROM : you should have android version 4.2.2 and cwm recovery then go to recovery and wipe data then wipe dalvik cache and then format system. Now download the zip from SD card and reboot system.
If it still gets stuck on boot the flash any other firmware
Sent from my GT-I9082 using XDA Premium 4 mobile app
thanks
adi160699 said:
For gennxt ROM : you should have android version 4.2.2 and cwm recovery then go to recovery and wipe data then wipe dalvik cache and then format system. Now download the zip from SD card and reboot system.
If it still gets stuck on boot the flash any other firmware
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the info!!
I already installed CWM.
Then i tried to install gennxt ROM, Which results in boot loop.
Can you please help me to revert to the original stock rom.(i dont have a backup ).
But i have the backup of the same model with me. Does it work with CWM restore ?
Yes I can help you
Just wipe data wipe dalvik cache and then format system and then reboot your phone I hope it helps!!
Sent from my GT-I9082 using XDA Premium 4 mobile app
motoshan said:
Thanks for the info!!
I already installed CWM.
Then i tried to install gennxt ROM, Which results in boot loop.
Can you please help me to revert to the original stock rom.(i dont have a backup ).
But i have the backup of the same model with me. Does it work with CWM restore ?
Click to expand...
Click to collapse
before flashing any rom you have to go back to the stock rom
it is a choice but that's better
from your question I understand that you flashed the new rom over cm 10 may be that's causing the boot problem so first flash the stock and then flash the custom rom you want to install
---------- Post added at 12:15 PM ---------- Previous post was at 12:13 PM ----------
adi160699 said:
Yes I can help you
Just wipe data wipe dalvik cache and then format system and then reboot your phone I hope it helps!!
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
helo friend wiping data cache and dalvik cache is good
but wiping system?? that will format the rom and you cant boot
after that you will need to reinstall or reflash the rom in order to boot so complete the quotes carefully
---------- Post added at 12:16 PM ---------- Previous post was at 12:15 PM ----------
I've done this and he wants his stock ROM back
Sent from my GT-I9082 using XDA Premium 4 mobile app
adi160699 said:
I've done this and he wants his stock ROM back
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yea I know I just said complete the sentence ok
after formatting system you should also type flash stock through odin
:/
Sent from my GT-I9082 using XDA Premium 4 mobile app
Nope!!
Neither of these worked for me!!
What i ve done :
as i mentioned, Installed CWM & installed cynogen mod, Working perfectly.
Then i tried to restore backup of another device(Which is exactly the same model.) but not of the modded phone.which result in boot loop!!
while completing the flashing of stock rom: it confirms that "this will install stock recovery," I confirmed with "Yes"...
But the fact is :i can still flash the cyanogen mod!!
do i ve to use Odin ?
motoshan said:
Nope!!
Neither of these worked for me!!
What i ve done :
as i mentioned, Installed CWM & installed cynogen mod, Working perfectly.
Then i tried to restore backup of another device(Which is exactly the same model.) but not of the modded phone.which result in boot loop!!
while completing the flashing of stock rom: it confirms that "this will install stock recovery," I confirmed with "Yes"...
But the fact is :i can still flash the cyanogen mod!!
do i ve to use Odin ?
Click to expand...
Click to collapse
yes you have to use odin that will be better
is there any other way of getting out of stucking boot logo other than flashing stock rom..?????
Related
Weird problem with my phone chaps, can you please help?
I can flash CM9 & CM10 with no issues. I can flash it via restore (CWM) or through a wipe.
I can flash CheckROM V4 Via ODIN with no issues, but I am unable to flash anything I download through the kitchen. I get a bootloop or it gets stuck at the Boot up Samsung logo.
Similarly, I am unable to flash any other ROM apart from CM9/CM10 via recovery. It gets stuck at the boot logo. I've wiped all the caches, and even tried to flash checkrom via Odin to see if this resolves the issues, but unfortunately not.
Is this a case of flashing an original Samsung ROM, then re-rooting and starting over?
I will be grateful if anyone can offer some assistance!
Are you doing a full wipe factory reset in recovery before flashing a ROM? you mentioned you wiped cache thats it
Sent from my GT-I9300 using xda premium
yldlj said:
Are you doing a full wipe factory reset in recovery before flashing a ROM? you mentioned you wiped cache thats it
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yeah sorry mate
full factory
cache partition
and dalvik cache
Try reinstall cwm. See how it goes.
Sent from my GT-I9300 using xda app-developers app
If not just atart from scratch.
Sent from my GT-I9300 using xda premium
Arsaw said:
Try reinstall cwm. See how it goes.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
tried already
switched between touch recovery and the normal one
yldlj said:
If not just atart from scratch.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
looks like it
Its not hard doesnt take long at all.
Sent from my GT-I9300 using xda premium
Maybe Megawipe or Superwipe script can help. You can try it if you haven't gone with flashing original firmware.
Sent from my GT-I9300 using xda app-developers app
format system as well before flashing a new Rom
slaphead20 said:
format system as well before flashing a new Rom
Click to expand...
Click to collapse
damn just saw this
flashed a stock ROM and I am stuck on the samsung boot screen
any tips pleasE?
I've got the stock recovery on now, shall I flash a custom recovery, wipe system and start again??
Update: Used the stock recovery to wipe and its now booted
Flashed custom ROM - Criskelo and back to square one. Freezing at boot logo.
Any advice please guys
winwiz said:
damn just saw this
flashed a stock ROM and I am stuck on the samsung boot screen
any tips pleasE?
I've got the stock recovery on now, shall I flash a custom recovery, wipe system and start again??
Update: Used the stock recovery to wipe and its now booted
Flashed custom ROM - Criskelo and back to square one. Freezing at boot logo.
Any advice please guys
Click to expand...
Click to collapse
Start by following the instructions in full regarding a wipe first .
That does not work redownload the rom or try another rom .
jje
Suggest you try ARHD rom
Sent from my GT-I9300 using xda app-developers app
JJEgan said:
Start by following the instructions in full regarding a wipe first .
That does not work redownload the rom or try another rom .
jje
Click to expand...
Click to collapse
Thanks mate
so I did a system wipe, then installed a stock ROM, then rooted and the installed Omega ROM and it seems to be working now.
THanks for your help all!
My problem goes like this: The cwm installations goes fine, but when i boot, it will remain the same, like i didn't install it. Any help?
you mean you are booting in the old rom ?
or you are stuck at some white screen ?
or stuck in bootloop ?
follow proper procedure while flashing rom ....
wipe data / reset
wipe cache
format system
wipe dalvik cache
install zip from sd
wipe data
reboot
Sent from my GT-S5670 using xda premium
mathm2013 said:
My problem goes like this: The cwm installations goes fine, but when i boot, it will remain the same, like i didn't install it. Any help?
Click to expand...
Click to collapse
Mount system before installing
I don't know the reason, but after i changed from kernel (i was using hells fusion), i can flash all of them. Thanks!
mathm2013 said:
I don't know the reason, but after i changed from kernel (i was using hells fusion), i can flash all of them. Thanks!
Click to expand...
Click to collapse
Because it's inbuilt CWM mounts system by default
iamareebjamal said:
Because it's inbuilt CWM mounts system by default
Click to expand...
Click to collapse
Lol
You got him wrong.
He said he was facing the problem with hells fusion kernel and when he switched to another kernel, his problem got solved.
Sent from my GT-S5830i using xda app-developers app
After I flashed stock ROM. The Phone keeps on blinking Samsung Galaxy S3 GT I9300 Logo. Doesn't start. Tried reflashing other stock ROMs. Tried Factory Reset as well..Please Help
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
boomboomer said:
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
Click to expand...
Click to collapse
No error is shown...but the android robot logo appears with a red indicator(red hazard sign) at top...but wipe cache and data works perfectly..
Try using a usb jig, them flash tje r with full wipe.
Sent from my HTC HD2 using xda app-developers app
tatz619 said:
After I flashed stock ROM. The Phone keeps on blinking Samsung Galaxy S3 GT I9300 Logo. Doesn't start. Tried reflashing other stock ROMs. Tried Factory Reset as well..Please Help
Click to expand...
Click to collapse
in download mode what does it show under PRODUCT NAME? if it is empty, the phone is screwed and service center in required.
boomboomer said:
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
Click to expand...
Click to collapse
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
tatz619 said:
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
Click to expand...
Click to collapse
Read and reply to post 7
sriram231092 said:
in download mode what does it show under PRODUCT NAME? if it is empty, the phone is screwed and service center in required.
Click to expand...
Click to collapse
Product Name shows GT I9300...
tatz619 said:
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
Click to expand...
Click to collapse
What firmware are you flashing ??
Did you initially flash a wrong firmware ??
Hi
I'm new to the forums and just wondering if anyone can help me out.
I've just started exploring custom ROMs and the like. I've flashed and rooted my Galaxy SIII about four times and never had any problems. Just yesterday I flashed the latest stable build of Slimbean and when I went to root it afterwards it completed the process but wouldn't start. Now it's stuck in a boot loop. I can't access download or recovery mode. Please Help!!!!!!!!
rmamaniac said:
Hi
I'm new to the forums and just wondering if anyone can help me out.
I've just started exploring custom ROMs and the like. I've flashed and rooted my Galaxy SIII about four times and never had any problems. Just yesterday I flashed the latest stable build of Slimbean and when I went to root it afterwards it completed the process but wouldn't start. Now it's stuck in a boot loop. I can't access download or recovery mode. Please Help!!!!!!!!
Click to expand...
Click to collapse
Your question is posted multiple times SEARCH/
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Wipe data + cache + davlik cache
---------- Post added at 01:32 PM ---------- Previous post was at 12:53 PM ----------
if doesn't work re update your device
TheDarkLegend said:
Wipe data + cache + davlik cache
---------- Post added at 01:32 PM ---------- Previous post was at 12:53 PM ----------
if doesn't work re update your device
Click to expand...
Click to collapse
How can I wipe cache or preform a factory reset if i can't access recovery mode?
Hi. I tried to flash newest version of GApps (full modulare which I have never use before, allways the stock) and newest version of CyanogenMod 11 Nightly. I'm also using CWM Recovery 6.0.4.6 in my GT-I9300. Someone in CyanogenMod forums told me to wipe all data/factory, cache and dalvic cache to make CM's trebuchet, before flashing a new ROM and GApps.
I tried that and result was that I'm getting the ****ing "PHONE HAS STOPPED WORKING" - problem.. Huger problem is that I need this phone tommorow in work, and it ruins my day totally if I don't get it work by tommorow.
Because of Wipe ALL data / factory reset, I do not have even any backup file in my device. What to do to fix it!?
MURRRRRRRRRRRRRR said:
Hi. I tried to flash newest version of GApps (full modulare which I have never use before, allways the stock) and newest version of CyanogenMod 11 Nightly. I'm also using CWM Recovery 6.0.4.6 in my GT-I9300. Someone in CyanogenMod forums told me to wipe all data/factory, cache and dalvic cache to make CM's trebuchet, before flashing a new ROM and GApps.
I tried that and result was that I'm getting the ****ing "PHONE HAS STOPPED WORKING" - problem.. Huger problem is that I need this phone tommorow in work, and it ruins my day totally if I don't get it work by tommorow.
Because of Wipe ALL data / factory reset, I do not have even any backup file in my device. What to do to fix it!?
Click to expand...
Click to collapse
Did u format system or just normal factory reset?
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
Did u format system or just normal factory reset?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I did format system and wiped all caches. I did everything and ****ed everything up. Now I dont have backup or anything. Flashing and wiping caches doesn't work, allways same prblem when I start my phone again.
What to do to fix the problem?
Can you boot into recovery? Have you got a external sd card?
If yes put another Rom on ext SD (if you have a SD card adapter for computer) boot into recovery and flash again!
If not can you get into download mode? If yes flash a stock Rom with Odin..
Sent from my GT-I9300 using XDA Premium 4 mobile app
tallman43 said:
Can you boot into recovery? Have you got a external sd card?
If yes put another Rom on ext SD (if you have a SD card adapter for computer) boot into recovery and flash again!
If not can you get into download mode? If yes flash a stock Rom with Odin..
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for helping. I flashed stock 4.3 Jelly Bean with Odin by using XDA's tutorial. Now I need to root my phone again to get CyanogenMod 11 and KitKat, but It's okay. Still don't know how to get CM11's Trebuchet work correctly. Problem is that if I flash PAGapps stock package, I get the phone work correctly, but Trebuchet disappears. If I flash full package of PAGapps, Trebuchet should work, but then this error happends and I need to flash stock rom with Odin.
What to try next?
MURRRRRRRRRRRRRR said:
Thank you for helping. I flashed stock 4.3 Jelly Bean with Odin by using XDA's tutorial. Now I need to root my phone again to get CyanogenMod 11 and KitKat, but It's okay. Still don't know how to get CM11's Trebuchet work correctly. Problem is that if I flash PAGapps stock package, I get the phone work correctly, but Trebuchet disappears. If I flash full package of PAGapps, Trebuchet should work, but then this error happends and I need to flash stock rom with Odin.
What to try next?
Click to expand...
Click to collapse
If you are flashing custom roms you do not need to root, custom roms come already rooted...I'm not sure which gapps are compatible with cm11 but have you tried Banks gapps I use them on Fusion kitkat rom (if they are compatible)..
Obviously there is some app in the full gapps that is causing your problem.As for CM11 launcher can't you use another launcher?
Hi all,
i have a rooted s3 for a while now with original rom, today i tried to install some flash via original recovery mode but i was getting the e signature failure message. i installed the clockwored recovery custom mode and went to install zip from sdcard and installed the 4 files ( 3 apps and 1 kernel) . now when i reboot i just got the attached image. do u think in some way the original rom was removed and i should install a new rom?? please help!
T-Fusion said:
Hi all,
i have a rooted s3 for a while now with original rom, today i tried to install some flash via original recovery mode but i was getting the e signature failure message. i installed the clockwored recovery custom mode and went to install zip from sdcard and installed the 4 files ( 3 apps and 1 kernel) . now when i reboot i just got the attached image. do u think in some way the original rom was removed and i should install a new rom?? please help!
Click to expand...
Click to collapse
It's look like a bootloop.
Try to enter from recovery for wipe data /factory reset ,wipe dalvik and wipe dalvik cache.
Sent from my GT-I9300 using XDA Free mobile app
KeTuRr74 said:
It's look like a bootloop.
Try to enter from recovery for wipe data /factory reset ,wipe dalvik and wipe dalvik cache.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
i tried this and didnt work, now i realized that i installed siyah kernel by mistake, how can i go back to the original rom..and no i didnt do any back up for the rom!
What doidn´t work exactly?
Entering recovery or doing a factory reset?
If you are able to enter recovery mode, try as "KeTuRr74" described. After that flash your rom again and try to boot without flashing a new kernel.
Original means for you? Samsung and provider stock rom?
T-Fusion said:
i tried this and didnt work, now i realized that i installed siyah kernel by mistake, how can i go back to the original rom..and no i didnt do any back up for the rom!
Click to expand...
Click to collapse
Try to install an other kernel for your rom if it's bootloop with the kernel.
Sent from my GT-I9300 using XDA Free mobile app
KeTuRr74 said:
Try to install an other kernel for your rom if it's bootloop with the kernel.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
I ended up installing a new rom and everything is working perfectly..my question is what happend to the previous rom ? can i still boot it ? if not how can we delete it .
T-Fusion said:
I ended up installing a new rom and everything is working perfectly..my question is what happend to the previous rom ? can i still boot it ? if not how can we delete it .
Click to expand...
Click to collapse
No probably you can't.
The previous rom has been erased by installing your new rom
Sent from my GT-I9300 using XDA Free mobile app
help me please
please excuse me for post here
but i have a big problem,help me that's urgent
i flash 4.3.3 rom to gs3 and i click wrongly on re-partition on odin without a pit file,now still on samsung logo please help me
rafael1369 said:
please excuse me for post here
but i have a big problem,help me that's urgent
i flash 4.3.3 rom to gs3 and i click wrongly on re-partition on odin without a pit file,now still on samsung logo please help me
Click to expand...
Click to collapse
Try to reflash the rom without choosing "Re-partition" option.
The 4.3.3 version not exist,just 4.3
Sent from my GT-I9300 using XDA Free mobile app
KeTuRr74 said:
No probably you can't.
The previous rom has been erased by installing your new rom
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
but all the data is still there because it is taking space...however i dont want it back now ..im happy with the current rom and everything is working fine ...i just want to delete the old original Samsung stock.
thank you
T-Fusion said:
but all the data is still there because it is taking space...however i dont want it back now ..im happy with the current rom and everything is working fine ...i just want to delete the old original Samsung stock.
thank you
Click to expand...
Click to collapse
Into your internal storage ?
Sent from my GT-I9300 using XDA Free mobile app
KeTuRr74 said:
Into your internal storage ?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
yes into the internal Storage
Install any ROM after full wipe: system, data, cache, dalvik cache and, if existing, the Android-maps in internal&external storage. There will be no essential rests of the previous ROM!
If you find something, post it.
T-Fusion said:
yes into the internal Storage
Click to expand...
Click to collapse
It's an emulated sdcard.Is totally normal when you flash a new rom.When you flash any Rom you will just wipe data not emulated storage
Sent from my GT-I9300 using XDA Free mobile app