Hello everyone,
I am currently running this version rooted with S-On. I have been trying a long time to get S-off to work on my device, but I cannot find the proper method. If someone can direct me to which s-off method works with 3.17.651 and hoot 2.09, that would be great!. Thanks for your help.
The only one that would work for me was moonshine. Have you tried that yet?
JudgeFutta said:
The only one that would work for me was moonshine. Have you tried that yet?
Click to expand...
Click to collapse
I am on 3.17.651 and I was not able to successfully S-OFF with Moonshine.
I forgot I was on 3.16. You could always go back to 3.16 s-off and then flash 3.17. A lot of stuff to do though.
Sent from my EVO using Tapatalk 4
Downgrade orrr???
How would i downgrade to 3.16 or what method could be used to s-off?
derrick101 said:
How would i downgrade to 3.16 or what method could be used to s-off?
Click to expand...
Click to collapse
If you have unlocked your bootloader and have a custom recovery installed, flash this http://forum.xda-developers.com/showthread.php?t=2127947&highlight=3+16+651+3, then use moonshine to s-off, then flash http://forum.xda-developers.com/showthread.php?t=2468418.
Restarting
When i try to flash the first .zip file it goes half way then the phone restarts and gets stuck on the splash screen am i supposed to use deodexed or odexed?
derrick101 said:
When i try to flash the first .zip file it goes half way then the phone restarts and gets stuck on the splash screen am i supposed to use deodexed or odexed?
Click to expand...
Click to collapse
Are you S-on?
Sent from my HTC EVO 4G LTE
FinZ28 said:
Are you S-on?
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Yes i cant go s-off until i downgrade
derrick101 said:
Yes i cant go s-off until i downgrade
Click to expand...
Click to collapse
You have to flash the kernel separately from the ROM.
Sent from my HTC EVO 4G LTE
FinZ28 said:
You have to flash the kernel separately from the ROM.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Can you list steps and links im sorry im very noob with downgrading
derrick101 said:
Can you list steps and links im sorry im very noob with downgrading
Click to expand...
Click to collapse
Check out the top link in my sig.
Also, what are you trying to downgrade?
Sent from my HTC EVO 4G LTE
FinZ28 said:
Check out the top link in my sig.
Also, what are you trying to downgrade?
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
My phone got updated to 3.17 so i cant s-off and i need s-off to use cyanogenmod so im trying to downgrade from 3.17 to 3.16
---------- Post added at 05:39 PM ---------- Previous post was at 05:29 PM ----------
FinZ28 said:
Check out the top link in my sig.
Also, what are you trying to downgrade?
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
I just read over the link in your sig but it didn't really help me much. is there a certain kernel that i flash. do i flash the kernel before or after? im very confused.
derrick101 said:
My phone got updated to 3.17 so i cant s-off and i need s-off to use cyanogenmod so im trying to downgrade from 3.17 to 3.16
---------- Post added at 05:39 PM ---------- Previous post was at 05:29 PM ----------
I just read over the link in your sig but it didn't really help me much. is there a certain kernel that i flash. do i flash the kernel before or after? im very confused.
Click to expand...
Click to collapse
You don't have to be S-off to run CyanogenMod. You need to extract the boot.img from the ROM and flash it via fastboot commands in the bootloader. Then you can flash the ROM itself from recovery. I explain this pretty clearly in my guide.
Sent from my HTC EVO 4G LTE
FinZ28 said:
You don't have to be S-off to run CyanogenMod. You need to extract the boot.img from the ROM and flash it via fastboot commands in the bootloader. Then you can flash the ROM itself from recovery. I explain this pretty clearly in my guide.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
ok so i use the 3.16 rooted zip file extract it and copy the boot.img to my desktop. then flash that through command prompt then flash the zip file itself? what command so i run to flash the boot.img?
I'm still getting the same issue. the rom zip doesnt finish flashing and reboots and gets stuck on splash screen.
FinZ28 said:
You don't have to be S-off to run CyanogenMod. You need to extract the boot.img from the ROM and flash it via fastboot commands in the bootloader. Then you can flash the ROM itself from recovery. I explain this pretty clearly in my guide.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
I'm only able to flash 3.17 even with flashing boot.img separately i get the same error. What could be causing this and i dont know why this thread says hboot 2.51 was our hboot supposed to update? if so mine didnt im still on hboot 2.09
nilnats said:
Hello everyone,
I am currently running this version rooted with S-On. I have been trying a long time to get S-off to work on my device, but I cannot find the proper method. If someone can direct me to which s-off method works with 3.17.651 and hoot 2.09, that would be great!. Thanks for your help.
Click to expand...
Click to collapse
Have you tried DirtyRacun (along with the BabyRacun process)? That might be your only bet.
Hey guys is it possible to downgrade from 3.17 to 3.16 if so can u show me a link I updated too hahahaha
Sent from my EVO using xda app-developers app
Captain_Throwback said:
Have you tried DirtyRacun (along with the BabyRacun process)? That might be your only bet.
Click to expand...
Click to collapse
I tried to do this (same boat with 3.17) and BabyRacun won't run because the version is above 3.16 and it DirtyRacun errors because of a version mismatch
"remote: 43 main version check fail"
Related
Hi i would like to download the hboot 1.49.0008 ( rogers gsm) i have serched the net for it and cant find it i only found the .49.0007 (european) can i flash this even if i have a rogers evo3d ? I dont want to blick it so i hope that somebody can help me with this im currentle on ota hboot 1.5 , 3.007 i am unlocked and rooted with s-on i know that i can s-off this hboot version but cm9/10 dont work with this hboot version its the main reason why i want hboot 1.49 xxxx to s-off and be able to flash all roms and kernels Thxwhere can i find/download hboot 1.49.0008 (rogers gsm)
bump as I would love to know this as well
Can anybody help ???
Do you have an RUU for the build that contains that hboot? You should be able to pull it out of the .exe or .zip version of the RUU, then repackage it to flash separately.
That's what I've done for hboots for the Evo 3D CDMA.
ramjet73
ramjet73 said:
Do you have an RUU for the build that contains that hboot? You should be able to pull it out of the .exe or .zip version of the RUU, then repackage it to flash separately.
That's what I've done for hboots for the Evo 3D CDMA.
ramjet73
Click to expand...
Click to collapse
Thx i dont have one but will try to find it
Will post back if i find this ruu
ramjet73 said:
Do you have an RUU for the build that contains that hboot? You should be able to pull it out of the .exe or .zip version of the RUU, then repackage it to flash separately.
That's what I've done for hboots for the Evo 3D CDMA.
ramjet73
Click to expand...
Click to collapse
how do i extract and repact the hboot from the ruu what files do i need ?
pit-pit said:
how do i extract and repact the hboot from the ruu what files do i need ?
Click to expand...
Click to collapse
If you have a zip version of the RUU, you need to take the android-info.txt and hboot file out of the root of that zip and re-zip then into a file called PG86IMG.zip, then flash that file from your bootloader (assuming you are S-OFF). If you are not S-OFF, the only way to change the bootloader is to flash the entire RUU, or change it in the process of getting S-OFF.
If the RUU is an .exe file, mpgrimm2 has instructions on how to extract the files you need in this post.
ramjet73
ramjet73 said:
If you have a zip version of the RUU, you need to take the android-info.txt and hboot file out of the root of that zip and re-zip then into a file called PG86IMG.zip, then flash that file from your bootloader (assuming you are S-OFF). If you are not S-OFF, the only way to change the bootloader is to flash the entire RUU, or change it in the process of getting S-OFF.
If the RUU is an .exe file, mpgrimm2 has instructions on how to extract the files you need in this post.
ramjet73
Click to expand...
Click to collapse
i tryed running the exe to flash the entire RUU since im s-on but it says it cannot downgrade my boot loader ... it can only uograde it so now what to do ?
What are you trying to do?
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
---------- Post added at 09:43 PM ---------- Previous post was at 09:32 PM ----------
I believe the hboot that you want is the original hboot that came with the evo on rogers, how do I know? I'm with rogers and when I unlocked my phone through rev. That was the number on my phone.
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
flashallthetime said:
What are you trying to do?
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
Click to expand...
Click to collapse
downgrabe my hboot 1.53.0007 to 1.49.0008 i am unlocket , rooted and s-on
i have the RUU .exe for the hboot 1.49.0008 i have tried installing it but i get an it fails beacuse my bootloader is updated (the only reason why i want to istall the RUU is to downgrade my hboot)
so now i dont know how to downgrade my hboot
ps sorry for my bad english
Go s-off, don't waste your time, most of the new roms require s-off to flash the firmware, there's a thread for doing the wire trick, look for it
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
---------- Post added at 09:48 PM ---------- Previous post was at 09:47 PM ----------
My hboot is now is 1.49.11007 I believe
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
Going S-OFF with JuopuntBear (wire trick) is definitely good advice. I was able to flash an RUU with hboot 1.50 over a configuration that had hboot 1.58 on an E3D CDMA model using the RUU.exe for the earlier release, but that was with S-OFF.
I have a thread in this forum about modifying the Main Version (mainver) of the phone to allow flashing of earlier hboots and RUU's, but I haven't tested that with S-ON and you will be better off in the long run getting S-OFF. Then you can flash any RUU or hboot you want.
ramjet73
I believe he's gsm, would you confirm that would work on a gsm phone
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
flashallthetime said:
What are you trying to do?
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
---------- Post added at 09:43 PM ---------- Previous post was at 09:32 PM ----------
I believe the hboot that you want is the original hboot that came with the evo on rogers, how do I know? I'm with rogers and when I unlocked my phone through rev. That was the number on my phone.
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
Click to expand...
Click to collapse
yes exacly !! i would like to downgrade to that version of hboot becuse i cannot flash cm9/cm10 on 1.53.0007 but im having a hard time to downgrade it i have the orriginal Rogers RUU .exe (witch contains 1.49.0008) but im unable to flash it from the .exe beacuse it says that i canot instal a older bootloader version and now i dont know what to do
ok i will try to S-OFF my phone with the wirer trick and then istall the RUU i will take a small brak and tris this in 20 minutes i will give you guys feedback to know if it worked
thx again for all you effort really apreciated
S-off makes life easy, that way you can freely cahnge hboot, flash firmware and kernels
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
OMG u guys are the gratest !!!!! i WORKED!!! i am finnaly on hboot 1.49.0008 unlocker rooted and S-OFF !!! im running CM9 as im writhing this thx alot for the quick reply guys i would never got it to work without your advise!!
i have put my hboot 1.53.007 to soff with the wire trick then installed the ruu.exe it dint install the stock rom becuse of a cid problem but it flashet my hboot 1.49.0008 so everything is good for me
THX again!
Great, so moral of the story just ask a simple question and you will find your answer, flash away.Just be very careful with flashing kernels for your gsm phone, there's a few that are floating around which are problematic
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
flashallthetime said:
Great, so moral of the story just ask a simple question and you will find your answer, flash away.Just be very careful with flashing kernels for your gsm phone, there's a few that are floating around which are problematic
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
Click to expand...
Click to collapse
thx what kernel do you recommend for cm9 (Agrabren) cuz i would like to overclock it to 1.5
i know this is not the place to awser thos question id you dont want to awser its ok with me you have done enought
thanks alot you are a life saver
again sorry for the noob question its my secont android device my fist is an hp touchpad and its far moore easy to flash than this phone but im getting the hang of it
Pm me
sent on my Evil Evo with no reboots, that's because I am running the kernel that's not available on xda
Bought phone today and got home and noticed the hbpot. I'm a flashoholic! What the hell should I do now??? Just HTC dev unlock I guess?
Sent from my EVO using xda premium
http://forum.xda-developers.com/showthread.php?t=1940512
this is an excellent option, it work for me and many others.
popper668 said:
http://forum.xda-developers.com/showthread.php?t=1940512
this is an excellent option, it work for me and many others.
Click to expand...
Click to collapse
Thanks man. So do you think they are working towards a windows based solution? Or is linux the exploit?
Sent from my EVO using xda premium
polo79 said:
Thanks man. So do you think they are working towards a windows based solution? Or is linux the exploit?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
if you read through the op you will see they do not plan on making a windows version and they also explain why
Sent from my EVO using xda app-developers app
Thanks to you as well. Ok. The instructions are a little sparse. I have a small netbook currently running ubunto, I could use that? Also, I would root with regaw and htc method and then use netbook for rest of instructions.
read the first post in the thread, it does work just follow the instructions.
popper668 said:
read the first post in the thread, it does work just follow the instructions.
Click to expand...
Click to collapse
OK. I got rooted with regawmod, then was successful in the downgrade to 1.12 hboot. Now I am stuck on trying to RUU to 2.13 from 1.22. I keep having it fail on updating though RUU. Is there any other way to get that done? Can I just flash Fresh 5.1.1? Or am i not able to because i'm not S-off???
polo79 said:
OK. I got rooted with regawmod, then was successful in the downgrade to 1.12 hboot. Now I am stuck on trying to RUU to 2.13 from 1.22. I keep having it fail on updating though RUU. Is there any other way to get that done? Can I just flash Fresh 5.1.1? Or am i not able to because i'm not S-off???
Click to expand...
Click to collapse
Y don't u just do the lazypanda s-off now since you are stock. U don't need fresh rom to do it. The new base is installed when u install a new rom on the new base. Just flash radios separately which u can do once s-off or just being on 1.12 I believe.
Anthonicia said:
Y don't u just do the lazypanda s-off now since you are stock. U don't need fresh rom to do it. The new base is installed when u install a new rom on the new base. Just flash radios separately which u can do once s-off or just being on 1.12 I believe.
Click to expand...
Click to collapse
Yeah but the instructions state to not do it with 1.22 (what i'm currently on) and only to do it with 1.13. Or am i mistaken?
polo79 said:
OK. I got rooted with regawmod, then was successful in the downgrade to 1.12 hboot. Now I am stuck on trying to RUU to 2.13 from 1.22. I keep having it fail on updating though RUU. Is there any other way to get that done? Can I just flash Fresh 5.1.1? Or am i not able to because i'm not S-off???
Click to expand...
Click to collapse
Why would you downgrade hboot and then run ruu to install the latest hboot? If you downgraded to 1.12 you should have no problem running lazy panda. Am I missing something?
On unlimited's site it says the rom requirements to run lazy panda is 1.13 RUU. I was confused on that as well but it hasn't been successful. I'm currently 1.12 hboot with 1.22 software version. So at this point just run the lazy panda?
Someone in mac's development thread stated they were able to run lazy panda on 1.12. You should ask about it in that thread and see if anyone can help
i ran it out of the box no RUU just ran it
Was that you that mentioned it then? I was having a hard time remembering who mentioned it lol
WHOO HOO! I'm S-Off!!! Ok am I finally ready for customer roms etc and I guess i need to flash radios of course.
edit: Thanks guys!
Let me know what customer roms u install. Those sound interesting.
Anthonicia said:
Let me know what customer roms u install. Those sound interesting.
Click to expand...
Click to collapse
Yes.......yes they are awesome. And I know where they are and I'm not sharing. Lol jerkface
ok i got my replacement yesterday unlocked and rooted with TWRP recovery installed
just need someone confirm this is the process i need to do.
Hboot 2.09
Fw 3.16.165
run Linux DirtyRacun process
then run Baby Racun process
my last LTE i got Launch day Hboot 1.12 i use LazyPanda to S-Off ,So i haven't kept up with all the new methods to get S-Off since then.
http://unlimited.io/jewel.htm thanks for confirming this procedure
scoot0073 said:
ok i got my replacement yesterday unlocked and rooted with TWRP recovery installed
just need someone confirm this is the process i need to do.
Hboot 2.09
Fw 3.16.165
run Linux DirtyRacun process
then run Baby Racun process
my last LTE i got Launch day Hboot 1.12 i use LazyPanda to S-Off ,So i haven't kept up with all the new methods to get S-Off since then.
http://unlimited.io/jewel.htm thanks for confirming this procedure
Click to expand...
Click to collapse
All you need to do is follow their directions on unlimited.io.
ok im S-OFF now thanks Delakit
scoot0073 said:
ok im S-OFF now thanks Delakit
Click to expand...
Click to collapse
Is there a way to obtain S-OFF with hboot 2.09 usung windows vista 64 bit? if there is can someone post a link? thank you
cabezapreta said:
Is there a way to obtain S-OFF with hboot 2.09 usung windows vista 64 bit? if there is can someone post a link? thank you
Click to expand...
Click to collapse
hboot 2.09/3.15?
hboot 2.09/3.16?
bigdaddy619 said:
hboot 2.09/3.15?
hboot 2.09/3.16?
Click to expand...
Click to collapse
software version is 3.16 651.3 71ORD
cabezapreta said:
software version is 3.16 651.3 71ORD
Click to expand...
Click to collapse
software version does not really help haha
what is your baseband or PRI
cabezapreta said:
Is there a way to obtain S-OFF with hboot 2.09 usung windows vista 64 bit? if there is can someone post a link? thank you
Click to expand...
Click to collapse
Idk.. I used Ubuntu 12.4 very easy
Sent from my EVO using xda premium
bigdaddy619 said:
software version does not really help haha
what is your baseband or PRI
Click to expand...
Click to collapse
PRI is 2.97_003
baseband is 1.12.11.1210
bigdaddy619 said:
software version does not really help haha
what is your baseband or PRI
Click to expand...
Click to collapse
hey big I need you help, I'm gonna be returning this phone to the store, I'm rooted with the stock rom, I rooted using your guide.
To unroot and lock the bootloader again I need to obtain S-OFF??? If I do please guide me in the right direction
your help is greatly appreciate it man!.
cabezapreta said:
hey big I need you help, I'm gonna be returning this phone to the store, I'm rooted with the stock rom, I rooted using your guide.
To unroot and lock the bootloader again I need to obtain S-OFF??? If I do please guide me in the right direction
your help is greatly appreciate it man!.
Click to expand...
Click to collapse
I have never relocked I think all you have to do is type oem lock in the cmd window and flash the stock recovery
Sent from "The One"
bigdaddy619 said:
I have never relocked I think all you have to do is type oem lock in the cmd window and flash the stock recovery
Sent from "The One"
Click to expand...
Click to collapse
Can i return it to the store with an unlocked bootloader? also I saw a unroot guide vipeRUU i think it was, is that still current? I don't wanna use any old methods that could damage the phone
cabezapreta said:
Can i return it to the store with an unlocked bootloader? also I saw a unroot guide vipeRUU i think it was, is that still current? I don't wanna use any old methods that could damage the phone
Click to expand...
Click to collapse
Idk about return but they'll work on it. VipeRUU should still work unless there was an update I wasn't aware of.
Sent from my SPH-L720 using xda app-developers app
Delakit said:
Idk about return but they'll work on it. VipeRUU should still work unless there was an update I wasn't aware of.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
For ViperRUU I need to have S-OFF on my phone, the only way to do that I think is using Ubuntu and I'm not familiar with it
I want to thank for replying to my post
cabezapreta said:
For ViperRUU I need to have S-OFF on my phone, the only way to do that I think is using Ubuntu and I'm not familiar with it
I want to thank for replying to my post
Click to expand...
Click to collapse
You can use a RUU, you don't need to be S-OFF, here is the link to all the RUU's for the jewel, provided by jmz: http://androidfiles.org/ruu/?developer=Jewel
jocarog said:
You can use a RUU, you don't need to be S-OFF, here is the link to all the RUU's for the jewel, provided by jmz: http://androidfiles.org/ruu/?developer=Jewel
Click to expand...
Click to collapse
Hey thanx man, can I use any of those RUU's or do you recommend one in particular?. Will this unroot my phone?
jocarog said:
You can use a RUU, you don't need to be S-OFF, here is the link to all the RUU's for the jewel, provided by jmz: http://androidfiles.org/ruu/?developer=Jewel
Click to expand...
Click to collapse
For VipeRUU to work, you must be S-off.
http://forum.xda-developers.com/showthread.php?t=2197909
For any other RUU, though, you are correct, you don't need to be S-off
Sent from my EVO using xda premium
FinZ28 said:
For VipeRUU to work, you must be S-off.
http://forum.xda-developers.com/showthread.php?t=2197909
For any other RUU, though, you are correct, you don't need to be S-off
Sent from my EVO using xda premium
Click to expand...
Click to collapse
But which RUU shoud I use? I have software version 3.16.651.3 71ORD
cabezapreta said:
But which RUU shoud I use? I have software version 3.16.651.3 71ORD
Click to expand...
Click to collapse
Try to downgrade using the instructions to get s-off, once yo get to the 3.15 version, download the 3.15 RUU, follow the instructions on unlimited.io, I've heard that you can use windows is just not supported by the devs you re on your own, it's real easy, just take off the "sudo./" part on each command and you hold be good to go, good luck!
scoot0073 said:
Idk.. I used Ubuntu 12.4 very easy
Sent from my EVO using xda premium
Click to expand...
Click to collapse
you know if there is a youtube video on how to do this. I already made an Ubuntu liveCD and I donwloaded the files I need but I have no idea how to untar and all the other terms used in that guide
Hey Everyone,
This is my first actual post on xda but these forums have helped me with many things that have come up with during my time with Android
I recently installed CM 10.1.3 RC2 for my HTC EVO 4g LTE and couldn't find a good guide to going back to the stock software that I had before. Nothing is wrong with CM but I just prefer sense for this device.
To install CM I unlocked my bootloader with HTC DEV and flashed twrp 2.4.1.0 according to CM's guide. I installed GooManager for access to the twrp bootloader but from their I'm confused as to how to revert back to stock htc sense. I downloaded the latest RUU for my device so if anyone can help me out that would be great. Thanks.
bkmike6 said:
Hey Everyone,
This is my first actual post on xda but these forums have helped me with many things that have come up with during my time with Android
I recently installed CM 10.1.3 RC2 for my HTC EVO 4g LTE and couldn't find a good guide to going back to the stock software that I had before. Nothing is wrong with CM but I just prefer sense for this device.
To install CM I unlocked my bootloader with HTC DEV and flashed twrp 2.4.1.0 according to CM's guide. I installed GooManager for access to the twrp bootloader but from their I'm confused as to how to revert back to stock htc sense. I downloaded the latest RUU for my device so if anyone can help me out that would be great. Thanks.
Click to expand...
Click to collapse
You can flash a Sense ROM. There are quite a few to choose from. If you want to go back stock and unrooted, you can run a RUU. If you're on the latest Hboot, you'll have to S-off and run VipeRUU to get you back to stock, since there is no RUU for the latest OTA.
Also, there is no such thing as a "TWRP bootloader". TWRP is your recovery
FinZ28 said:
You can flash a Sense ROM. There are quite a few to choose from. If you want to go back stock and unrooted, you can run a RUU. If you're on the latest Hboot, you'll have to S-off and run VipeRUU to get you back to stock, since there is no RUU for the latest OTA.
Also, there is no such thing as a "TWRP bootloader". TWRP is your recovery
Click to expand...
Click to collapse
So can I use twrp recovery to install the RUU that I downloaded?
p.s. I'm a noob when it comes to this stuff lol. so thanks for your help
bkmike6 said:
So can I use twrp recovery to install the RUU that I downloaded?
p.s. I'm a noob when it comes to this stuff lol. so thanks for your help
Click to expand...
Click to collapse
No. The RUU is run from your computer. Custom ROM's are installed through TWRP.
Download this:
http://d-h.st/3wS
Then flash through recovery. It will get you back to stock.
Sent from my EVO using xda app-developers app
mabry said:
Download this:
http://d-h.st/3wS
Then flash through recovery. It will get you back to stock.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
If he's on the latest OTA and flashes that ROM his touch screen won't work...............
He needs the 3.16 software version, not 3.15.
mabry said:
Download this:
Then flash through recovery. It will get you back to stock.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Will flashing that through recovery lock my bootloader too?
bkmike6 said:
Will flashing that through recovery lock my bootloader too?
Click to expand...
Click to collapse
No. It's a "stock" ROM, not a RUU. If you truly want to go back completely stock, get S-off and then use the tool in the link below. If you simply want a stock-feeling Sense ROM, check out the development threads-there are plenty.
Here is the link to VipeRUU. You must be S-off to use it.
http://forum.xda-developers.com/showthread.php?t=2197909
It would also be helpful if you posted your Hboot and radio (baseband) version.
FinZ28 said:
No. It's a "stock" ROM, not a RUU. If you truly want to go back completely stock, get S-off and then use the tool in the link below. If you simply want a stock-feeling Sense ROM, check out the development threads-there are plenty.
Here is the link to VipeRUU. You must be S-off to use it.
http://forum.xda-developers.com/showthread.php?t=2197909
It would also be helpful if you posted your Hboot and radio (baseband) version.
Click to expand...
Click to collapse
Ok so ruu then s-on and it's finished or is there something else to do to lock the bootloader?
3.17.651.4 710rd
fyi
deidreindc said:
Ok so ruu then s-on and it's finished or is there something else to do to lock the bootloader?
3.17.651.4 710rd
fyi
Click to expand...
Click to collapse
Just use the VipeRUU and don't mess with your phone as its happening. ( you won't be able to use it for 30mins+ during the process.
Sent from my Evo 4G LTE using Tapatalk
Fin, and Ireyes, just wanna say huge thanks for all your patience. Wish I had it.
Sent from my EVO 4G LTE using XDA Premium 4 mobile app
scottspa74 said:
Fin, and Ireyes, just wanna say huge thanks for all your patience. Wish I had it.
Sent from my EVO 4G LTE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just doing what I do. Thanks Scott:thumbup:
Sent from my HTC EVO 4G LTE
I recently got an HTC Evo 4g LTE used and it came with Cyanogenmod 10.1.3. I thought that this would be nice, as I have several friends who use Cyanogenmod. However, I can't activate the phone with my carrier (Ting) unless I have the stock software. I found vipeRUU, and believe that that will restore my phone. However, I just want to make sure that the versions of the software on my phone and vipeRUU match and are compatible so that I don't wreck my phone. What do I need to check on my phone to make sure that vipeRUU will work? I'd be happy to post any info about my phone; I haven't because I'm new at this and don't know what info you need. Also, I have twrp installed if that makes a difference.
Or should I just use DirtyRacun to RUU?
If you are S-off, then VipeRUU will work. There is also a 3.17 RUU that was recently released that you can run if you're S-on. Really, though, all you need to do is flash a Sense ROM and you should be able to accomplish everything you need to.
Sent from my HTC EVO 4G LTE
FinZ28 said:
If you are S-off, then VipeRUU will work. There is also a 3.17 RUU that was recently released that you can run if you're S-on. Really, though, all you need to do is flash a Sense ROM and you should be able to accomplish everything you need to.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Just to be clear, it doesn't matter what hboot version I am? Or anything else's version? And out of curiosity, would any version of the RUU work or do I need to use the newest?
Thanks for your help!
Jaris006 said:
Just to be clear, it doesn't matter what hboot version I am? Or anything else's version? And out of curiosity, would any version of the RUU work or do I need to use the newest?
Thanks for your help!
Click to expand...
Click to collapse
Hboot doesn't matter, no. I would use the newest RUU.
Sent from my HTC EVO 4G LTE
hi, can someone help me? i'm trying to go back to stock but i dont know how to do it. i have s-on. hboot 1.12. radio 1.02. i have trwp in it too. pm me or post here! thank you!!
sue114 said:
hi, can someone help me? i'm trying to go back to stock but i dont know how to do it. i have s-on. hboot 1.12. radio 1.02. i have trwp in it too. pm me or post here! thank you!!
Click to expand...
Click to collapse
Use this:
http://www.htc.com/us/support/htc-evo-4g-lte-sprint/news/
Sent from my HTC EVO 4G LTE
Thanks for replying! I did that and try to update but when it turned back on, it went to the twrp screen. Or should I do it manually?
sue114 said:
Thanks for replying! I did that and try to update but when it turned back on, it went to the twrp screen. Or should I do it manually?
Click to expand...
Click to collapse
Try the manual install.
FinZ28 said:
Try the manual install.
Click to expand...
Click to collapse
i just tried it. it popped up
error[159]: image error
the rom update utility cannot update your android phone
please get the correct rom update utililty and try again
sue114 said:
i just tried it. it popped up
error[159]: image error
the rom update utility cannot update your android phone
please get the correct rom update utililty and try again
Click to expand...
Click to collapse
Try a different USB port USB 2 work the best
I imagine you followed all the instructions on that page and tried redownloading the exe?
BD619 said:
Try a different USB port USB 2 work the best
Click to expand...
Click to collapse
i tried using different usb port but still not working. same message came up. should i reinstall the ruu? ty
---------- Post added at 09:34 PM ---------- Previous post was at 09:28 PM ----------
oxymoron1 said:
I imagine you followed all the instructions on that page and tried redownloading the exe?
Click to expand...
Click to collapse
i installed the htc sync and the file but still no luck. i should redownload the file? ty