Related
Hello, it's my first post here at XNAdevelopers. I have a problem with my x10i: when i flashed my x10i to the 2.3.3 GB prerooted, i wanted to have xrecovery (don't know why it wasn't installed) , so i opened the flashtool and connected my x10i to the PC via USB cable, turned on USB debugging mode and after that my PC (Win7) showed me that the drivers were not installed. So the Flashtool does not detect my x10i. What should i do to get it working?
I have just installed the right drivers, please delete the theme.
did u install the correct drivers ??? and did u connect ur phone in debugging mode and applied the drivers ???
mate even i m facing same issue. help help.. and what it mean by correct drivers.. wich one shuld i install
Flashtool dont recognize my phone.
I can flash tft, pc companion, ok, seus ok, superoneclick ok, but when i turn on flashtool, usb debug on, unknown res on, nothing happen.
I have all drivers, antivirus off, everithing off.
Is it posible to flash a ftf rooted with xrecovery?
I cant instal xrec. Tried flas 2.1, rooted with superoneclick.
But xrec nothing, manual way too.
Any sugestion pleeeease???
Fixed on 3 th pc.
Are you running as Administrator
Did you try another USB port
Do you have updated Sony pc companion/update service
are you on Win 7/Win XP/Vista ?????
Do you have the right Firmware/Baseband/Flashtool for your phone/Rom
Did you just start all over again reflash/root/xrecovery and read the how to and watch the video again
(DO NOT CLOSE FLASHTOOL)
Did you try:
This is Stock/Generic
http://forum.xda-developers.com/showthread.php?t=1196808 (This one has Videos)
This is Wolfs rom
http://forum.xda-developers.com/showthread.php?t=1192988 (this one has videos)
dukelc said:
Flashtool dont recognize my phone.
I can flash tft, pc companion, ok, seus ok, superoneclick ok, but when i turn on flashtool, usb debug on, unknown res on, nothing happen.
I have all drivers, antivirus off, everithing off.
Is it posible to flash a ftf rooted with xrecovery?
I cant instal xrec. Tried flas 2.1, rooted with superoneclick.
But xrec nothing, manual way too.
Any sugestion pleeeease???
Fixed on 3 th pc.
Click to expand...
Click to collapse
I believe that flashtool requires Java to be installed. Could that be your problem?
Sent from my X10i using xda premium
I've flashed a few different roms (trying to get around this), and i can't get flashtool (latest version, just downloaded yesterday) to recognize that my phone is in debugging mode. it flashes fine, no issues, then i disconnect, restart the phone, turn on USB debugging and allow non-market apps.
then i reconnect, and flashtool always says debugging is off, when the phone says debugging is on. i turn off the phone, and reconnect while it's booting, and i get the same result. i can flash all i want, but i can't get flashtool to root the phone, or install xrecovery.
i've searched, and can't find a solution. any ideas?
- Trying Open Flashtool with the phone connected.
- Uninstall flashtool and install an old version of the program
- if does not work, change the cable (I've had a similar problem, I bought a new cable...)
Same issue found my solution
Hey I had the exact same issue but I found a solution.
My device is SE x10i 2.3.3 Generic
What I did was accidental.
I tried the old method of routing gingerbread which was too downgrade using "X10_aZuZu_Kernel_Downgrade_Generic.ftf"
but wat I also did was extract the load & kernal from the original ftf that I used to flash my phone with in the first place and put them into their own bundle so I could restore them.
After Flashing with the aZuZu downgrade
I disconnected the phone and turned it on it was stuck at the load screen where it says Sony Ericsson so I connected it again and my pc started downloading drivers.
But I installed the SEMC USB driver in the first place so I was wounder wth was goin on.
It turns out that in order for this to run smoothly you must make sure ALL DRIVERS are installed I personnally thought there was only one driver lol.
So you need to download the SEMC MASS STORAGE driver and 2 others (can't remember the names) perhaps the easiest way would be to just install the latest pc companion not sure but anyways this worked for me.
hope this helps
I want to unlock bootloader of my st15i, but the driver wont install, it says that I need 64 bit version of package,
but when I connect testpoint to USB cable shield, I hear the same sound as i hear when i connect my USB mouse (i.e. hardware connected) but I dont get any new hardware found wizard.
extra information- I have installed SEUS and pc companion both
anyone?
Just try to install XP Mode, if you have an W7 Ultimate (or Win XP Pro in Virtual Machine).
Install All drivers and soft you need to unlock to XP.
Then assign USB device to Vitrual Machine, and try.
It should be to work.
In that way i am rooting\flashing my phone.
Sorry for my english
I unlocked the boot-loader of the phone on my Windows 7 64-bit just fine and I also installed PC Companion / SEUS and the Google USB Driver (which can be found in the Android SDK) before connecting the phone. Try the Device Manager if your phone driver has been correctly installed or remove to re-install it.
google USB driver isn't that driver which is used when we use zergrush method for root, I think I alreadyinstalled it when I rooted, I dont know where i'm going wrong, did you get the error while installing drivers that came with S1tool? or can you share the S1tool you used along with drivers if possible?
or maybe I'm using wrong point as testpoint, can you show me the testpoint?
anyone??
don't be lazy pals
metalrawk said:
I want to unlock bootloader of my st15i, but the driver wont install, it says that I need 64 bit version of package,
but when I connect testpoint to USB cable shield, I hear the same sound as i hear when i connect my USB mouse (i.e. hardware connected) but I dont get any new hardware found wizard.
extra information- I have installed SEUS and pc companion both
Click to expand...
Click to collapse
take this!
vasilis13 said:
take this!
Click to expand...
Click to collapse
where to copy these drivers?
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.