Hi,
I have LG Optimus L9 768e which is rare phone (asian version) eventhough I am living in Bosnia and Herzegovina.
Recently my phone started to stuck (after installing some appz...). I have no antivirus as it makes slow.
I tried to "update" like I did for sister's phone Samsung Galaxy SII but unsucessfully I found that such phone (here on xda only 3 posts unrelated) is not on the map of internet. It is not compatible as far as I assume with 768.
here are some info>
imei> 354745050170xxx Imei SV 00
Model LG-P768e
android 4.1.2
basemand version L6260_modem_sic_01.1230.00
Kernel 3.0.31
Build number JZ054K
Software version P768e20b-SEA-XX
I tried hard reset and clear everyhing but problem is the same. Especially when reading SD card. (I changed SD card but withouth success)
Well, it seems I have latest version. Is it possible to upgrade to 4.3. CyanogenMod (I tried on website but not for 768e version)...
Any help..
Well, I figure out that LG products producing thousands of versions of hardware and software which makes difficult to update and further give support. I was a fan of LG as many other tehnical devices are LG. I also always recommened LG. From now on , I will skip to buy ANY LG product as their support is very low and bad. hundereds of tv, mobile, other electrical equipt.... for most I do not need update but for mobile they are terrible while samsung is surely better. Most probably, if I do not find solution, I will sell it for low price and buy Samsung. It seems more advance in support and community use.
baxmax said:
Hi,
I have LG Optimus L9 768e which is rare phone (asian version) eventhough I am living in Bosnia and Herzegovina.
Recently my phone started to stuck (after installing some appz...). I have no antivirus as it makes slow.
I tried to "update" like I did for sister's phone Samsung Galaxy SII but unsucessfully I found that such phone (here on xda only 3 posts unrelated) is not on the map of internet. It is not compatible as far as I assume with 768.
here are some info>
imei> 354745050170xxx Imei SV 00
Model LG-P768e
android 4.1.2
basemand version L6260_modem_sic_01.1230.00
Kernel 3.0.31
Build number JZ054K
Software version P768e20b-SEA-XX
I tried hard reset and clear everyhing but problem is the same. Especially when reading SD card. (I changed SD card but withouth success)
Well, it seems I have latest version. Is it possible to upgrade to 4.3. CyanogenMod (I tried on website but not for 768e version)...
Any help..
Well, I figure out that LG products producing thousands of versions of hardware and software which makes difficult to update and further give support. I was a fan of LG as many other tehnical devices are LG. I also always recommened LG. From now on , I will skip to buy ANY LG product as their support is very low and bad. hundereds of tv, mobile, other electrical equipt.... for most I do not need update but for mobile they are terrible while samsung is surely better. Most probably, if I do not find solution, I will sell it for low price and buy Samsung. It seems more advance in support and community use.
Click to expand...
Click to collapse
Just want to let you know that flash custom rom on this phone need bootloader unlock first. Please don't try it, you will soft-brick your phone. If hard reset phone and change sdcard don't help you, maybe it's hardware problem.
Related
Hi.
I have a problem with my Note. I bought the Korean version of the phone (at leats it should be) but the specifications of the phone are driving me crazy lol
As I said, when I bought it, it should be the Korean version, however the rom running on it is from AT&T (AT&T splash screen, AT&T wifi hotspots in the settings, AT&T phone update and so on). The phone is rooted. When I run a device info app, it’s a mess:
Android version: 2.3.6
Release Codename: REL
CPU ABI: armeabi-v7a
CPU ABI2: armeabi
Hardware: SHV-E160L
Board: MSM8660_SURF
Device: SGH-I717
Display: GINGERBREAD.Jhonms.557419
Model: SAMSUNG-SGH-i717
Product: SGH-I9220
Even though I don’t understand some of this info, there are 3 things that intrigue me. The CPU, I guess it’s from the Korean version, since it seems the AT&T devices have a QUALCOMM processor. But the weirdest part for is the Hardware (SHV-E160L) and the Device and Model (SGH-I717) information. Shouldn’t that be the same in all the information? So my phone is it the AT&T model or the Korean model? The guy who sold it to me told me it was the Korean model but they change something in the ROM to support Chinese (I live in China), and the Korean ROM doesn’t support Chinese. However, I want to put the original Korean ROM because it has the NFC already working, while in the AT&T build I have in my phone, it’s not activated yet. So, anyway can anyone tell me which model I have?
And, if it's the Korean model, how did he put the AT&T ROM on it? I thought you couldn't mess the S7000, SI717, etc model roms?!
Thanks in advance.
This is all correct for an i717 at&t model.
hi,
i am also living in china and i guess i have the same device with yours.
i checked some web sites and they said at&t model doesn't have any physical home button.
but mine has it and the korean model (E160L) has it, too.
so i guess the hardware is from korea but the rom is not the original one.
does your device has '掌界网www_dot_wpcnn_dot_com' in Build number?
if so, it must be the same as mine.
i am thinking whether i can rewrite E160L original rom by modifying some information in build.prop. but i haven't succeeded in doing it because i don't know correct data in E160L's build.prop. (i am thinking samsung kies can update the rom to E160L's one if i fake it to E160L)
this device supports LTE though. i don't know if it's enabled on this device or not.
*#2263# doesn't the menu for it.
and i tried to install CMW (for SGH-I717) by odin3 today. flashing it to the device was ok. but the device cannot get in recovery mode....(infinite loop of booting)
anyway, this rom sucks.
bichir said:
i tried to install CMW (for SGH-I717) by odin3 today. flashing it to the device was ok. but the device cannot get in recovery mode....(infinite loop of booting)
anyway, this rom sucks.
Click to expand...
Click to collapse
Was anyone able to flash CWM on this? I am also having a loopy-recovery.
AFAIK... CMW = for ENGLISH, FRENCH and SPANISH etc ...languages.... and not set for 128bit character languges (am not sure iof right-correct tech word for chinese kange etc sorry to lazy to look that word up!)
the CMW = for 'western languages' only
Smart for S'sung = KOREAN MODELS = as non western languages .....
((( that they designagted that as "INTERNATIONAL MODEL" phones different MODEL NUMBER to ATT/Rodgers etc )))
There is a thread from one OP = about BOUNTY for making "korean models' able to do CMW + ATT/Roders ROMS etc ,,,,, you can search for there for my comments ..
Cheers , hope this helps towards some explinations of CMW/Drivers etc between two models of NOTE
hi
my phone is SHV E160L....is it same I717??? can use 717 rom ?? or not??
thank you ....
Lung Lung said:
hi
my phone is SHV E160L....is it same I717??? can use 717 rom ?? or not??
thank you ....
Click to expand...
Click to collapse
no, no and no.
If I may have your attention within this Thread, the report system is not for ROM issues .
The report system is for Forum Rule violations, so please do not use the reporting system to identify your ROM/Rooting and or any issues regarding this manner.
Please understand that issues if they can be will be addressed, within the thread. Continue reporting that regarding your ROM issues, will result in abuse of the reporting system.
Thank you.
i have the same phone as you do some chinese guy rooted the phone without asking me and then i have ended up with this boring software i have tired everything the at&t thing doesnt even work but i will keep looking and when i find it i will post to let you know what i did!!
I have used unlock code to use my LG Optimus G (Att) in Russia. It was working fine until I have found the strange thing about it. When I tried to update it to android 4.1 it didn't let me to it and showed authorization error. Also in the settings- phone identity- my phone number is set as unknown. I don't know what to do!
vladislav77 said:
I have used unlock code to use my LG Optimus G (Att) in Russia. It was working fine until I have found the strange thing about it. When I tried to update it to android 4.1 it didn't let me to it and showed authorization error. Also in the settings- phone identity- my phone number is set as unknown. I don't know what to do!
Click to expand...
Click to collapse
Current Android version on this model phone is 4.0.4.
4.1 has not been released.
Yeah, there is no 4.1 update yet (at least for the AT&T version).
There is a leak out for the Korean phones and they don't work on our phones, if you installed it yourself you had the wrong ROM.
I'm not sure if you can just install one of the current ROMs for our phone and have it fix everything or not (if it doesn't work you will have to use the LGNPST method to restore to stock).
I would suggest you install one of the ROM's from HERE. (Stock AT&T) and then maybe trying either The BaseROM or the Nocturnal ROM.
Hi everyone,
I'm having issues with my LG G3 D855! It was originally locked to Optus in Australia, but I have recently wanted to root it. To do this I found I had to downgrade to Android 4.4, which I did successfully using the LG Flash Tool. It worked well, but it messed up at the same time. I actually flashed the European version of 4.4 over instead of an Optus version. As someone with little experience in the field, the European/International version seemed the right one since there was no Australian versions on the site. LG wouldn't replace the firmware unless I coughed up $350, seeing as I voided the warranty. After doing further digging online I found a Telstra version of the LG G3 firmware but the phone repair shop said that flashing a Telstra version over would lock it to telstra and that I would require a Telstra sim to use the phone! At the moment my phone is functioning okay, I'm able to text, call and mobile data and wifi both work. The issue is the missing Australian apps and the many European ones that aren't mine. Also out of curiosity, has the European G3 received 5.0 yet? It didn't show up in the software updater for me. Looking for any advice I can get with this... If you have any further questions about the functionality I will reply as soon as I can.
Thanks!
Hi to all!
This is my first post here.
Couple days ago i purchased LG v10 (F600L) with 64GB of ROM! This is korean model from network U+.
I live in Croatia so I can't use some features from phone, and it's not the major problem.
I wonder if is possible to flash phone with H960 firmware? Via LGUP app from my PC? Is it problem because my phone has no unlocked bootloader and in some posts on the internet I readed I can brick up my phone.
4G does not work either. Probably only korean version of LTE, not supported in Croatia.
So, if I do firmware upgrade via LGUP, with euro-version, will I get phone with only 32GB, will LTE bands be opened to euro-networks?
I didn't say that I can't upgrade my korean version to Android 6.0, via OTA or LG Bridge. It says Cannot check the latest firmware.
So, guys, to do it or stay out of any attempting?
Thanks and regards from Dubrovnik!
Is it true that noone knows?
Cannot, ne mozes! Just try to read a little more about it.
If you click the link you can see there is support for 4G in Croatia.
https://www.frequencycheck.com/compare-devices/ynatK8/lg-v10-h961n/lg-v10-h962
Pozdraviti iz Thailanda
I can see Croatian operators can offer me LTE 1800mHz only.
So, in suburbs of croatian big cities I have LTE, but only in streets, outside places etc. Whei I enter in some bar or restaurant, LTE wanishes.
I'm on VIPnet Croatia which provides LTE 800/1800. It seems my Korean V10 works only on 1800.
Too bad. Cause, it's good phone. I upgraded recently to Android 6.0 (MM) via link on this forum and it works even better than on 5.1.
On posts on this forum(s) I can see that my device cannot be flashed with another firmware. I've downloaded Turkish version (64GB) but LG UP says Error. It seems I have to root my device, but even than, it's not for sure that all LTE bands will working.
Koreans made the mess by locking with brandings their devices.
@moby77: for what I know, you can't flash a different firmware... a brick is nearly assured.
But you can try this code: 5457#*600# then go to Multi Band Selection and check LTE bands that are available in your Country.
Don't know if that procedure works in your device, but it well worth a try!
moby77 said:
Hi to all!
So, if I do firmware upgrade via LGUP, with euro-version, will I get phone with only 32GB, will LTE bands be opened to euro-networks?
Click to expand...
Click to collapse
I am not sure but most probably flashing wrong firmware will brick the phone. However, one thing I am sure is just flashing the firmware on different version never unlocks the bands of 3G/LTE. These bands cannot be unlocked this way. If F600L does not support a particular band in your country, it will not run LTE no matter what firmware you flash.
F600L is very well locked by Koreans so I san't do anything except flashing new kind of firmware, but one provided from U+ network.
One day I got mad, so I used LG UP, downloaded firmware for Turkish H960, and pressed Start button (it really was pissed off so even I bricked phone, my fault. Totaly insane, but...). After 4% od doing "something" it said Error, cannot flash firmware! (or something like this).
Official os
you have H901-10c official os bcz when i upgred using LGUP my phone is not starting as well as not showing charging sign when i am connect my charger
A week into January and there is no information from Telstra about anything to do with its G5.
So i figured I'd ask here if there is anything that can be done to it (Custom Recovery, kdz flashing, etc).
I'm a little confused with the software version as mine displays 505 rather than a region code.
I can't help out.. But I can confirm I'm in the same boat, same '505' software version, bought it outright and unlocked from telstra.. Yet I'm sitting here waiting for the update that LG no doubt worked tirelessly to push..
My question is can we just flash the european H850 kdz over the H850K? as they both have identical hardware specs.. So far as i can tell the branding is the only difference?
If anyone checks this with a different model letter I'd be curious if AIDA64 or another system information tool recognizes the letter variant, as AIDA64 only mentions H850.
Incase you haven't seen this forum yet, if you skip down to posts made in december 2016 onwards, there are plenty of people asking similar questions, seems anyone having bought a G5 from Optus actually has the H850 (non-k) variant.
forums.whirlpool.net.au/archive/2486011
..got the prompt today.
Currently downloading nougat for the H850K
i think it has to be H805 European model, our 805 Australian model can't do anything.