Hi, i have rogers evo 3d gsm model. its lcd panel was broken so i replaced it with new one. the new one worked fine for one day but next day it started showing images like the one i attached. so after that i bought whole housing with touch and display. but still it shows blurry images in 3d mode. Please someone help me.
harman_preet72 said:
Hi, i have rogers evo 3d gsm model. its lcd panel was broken so i replaced it with new one. the new one worked fine for one day but next day it started showing images like the one i attached. so after that i bought whole housing with touch and display. but still it shows blurry images in 3d mode. Please someone help me.
Click to expand...
Click to collapse
i think a connector either broke or is loose when you did your swap-outs.
which items did you buy--oem or jobber?
toyzboyz said:
i think a connector either broke or is loose when you did your swap-outs.
which items did you buy--oem or jobber?
Click to expand...
Click to collapse
jobber... i buy it from ebay... one that worked for one day was also same....
Related
Any one else that hasn't accepted the update only have half screen that in 3d when in 3d mode??
MikeC84 said:
Any one else that hasn't accepted the update only have half screen that in 3d when in 3d mode??
Click to expand...
Click to collapse
what?
When I view a 3d picture or video only half the screen is in 3d the other half is just blurry
Sent from my PG86100 using XDA Premium App
Any one have anything wrong with viewing 3d pictures, that hasn't accepted the ota
I've done no updates to my phone (had it since Wednesday) and I have no issues with 3D pics/vids.
Try rebooting the phone.. (doubt it will help). What you are describing almost sounds like what happens due to a hardware failure.. I've seen flat screen TVs have half the screen be ok, and the other half be all screwed up from faulty hardware
MikeC84 said:
Any one have anything wrong with viewing 3d pictures, that hasn't accepted the ota
Click to expand...
Click to collapse
3D working fine here. No OTA!
It seems that you have to let your eyes settle in to get the full effect. Not sure if that's what you're referring to though.
you got to find the SWEET SPOT!!!
(As with anything )
Thaxx said:
you got to find the SWEET SPOT!!!
(As with anything )
Click to expand...
Click to collapse
No it definitely my phone gonna take it in for a replacement tonight
Today my 2 years old kicked my Foyer to the ground and the touch screen got busted, it cracked pretty bad. It was my right hand, I used for so many things. I used to work, for entertainment, it was a really useful tool. Now I can't see my life without a tablet. I tried to use my HP Slate 500 but it's just too slow to be useful.
Now I need two things. One to recover all the data that I have in the Foyer and the second is to find a replacement.
How can I transfer the data from the tablet to my PC with a busted touch screen? I can't even disable the ring lock. Tried to connect it to my PC but it didn't work at all. Can someone tell me how to make the transfer?
My other question will be, do I try to buy another Flyer on the net, they are discontinued at BestBuy? Should I get a Evo View? Or there is something better? By the way, the stylus is a must for my tablet. If you were in my position, what would you do, which tablet would you buy?
I'm using my wife's Kindle Fire, it's nice but I found it a little restricted.
If someone can help me out please let me know.
Thanks
Diego
Sorry to hear bout ur Flyer bruh. My flyer screen cracked on me a couple weeks ago also. I had a warranty with squaretrade but they couldn't fix it so they ended up giving me a reimbursement of the original price of my flyer when it bought it the day it came outwhich was $499.00. I was thinking of getting a different tablet but loved my flyer to much to switch. So i ended up buying a brand new EVO View off ebay for $289. 00 and pocketed the rest of my money. It was a win win situation. So if would suggest u get a EVO View for cheap off ebay and if u don't have a warranty i would recommend getting a squaretrade warranty.
Sent from my PG86100 using XDA Premium App
If not already, either s off or HTC Dev unlock. Flash custom recovery. Hopefully you can see enough on the screen to navigate the menu go to mounts and storage and mount your device to your PC
Sent from my HTC Flyer P510e using xda premium
Really sorry about your loss buddy,
Try these 2 softwares ( PC ), the might be of great asset to help you retrieve your data.
http://www.fjsoft.at/en/
http://de.codeplex.com/
You could go with the other option and replace the screen. I replaced my LCD screen on my HTC View (Samething as flyer). It is not a simple job but can get you up and running like new. It is a pain like the new iphone screens. Have to take everything out to get to it. I would recommend getting the LCD ($110) and Touchscreen ($50). These can be difficult to separate but can be done if you take your time and save the $50.00.
I have another one am replacing for someone and will try and post pictures during the process. screen should arrive early next week.
May your Flyer rest in peace.
I'd suggest looking online in other countries. South Africa has stock at Dion Wired, Vodacom, & I think Makro. I'm sure if you searched their websites you could purchase one online & get it couriered.
Otherwise try the Jetstream. It's pretty decent
Sent from my HTC Flyer P510e using xda premium
I solved the the broken Flyer problem, Sprint have the Evo View for $150. So I'm getting a new View. Now the problem will be how to transfer the data. I can't get the touch screen to work. I can't unlock it. If I connect it to my PC it's there any way to retrieve the data without using the Flyer touch screen. The screen is completely clear, I can see all the menus but can't use anything because the touch screen don't register the input.
Will try the links that are mentioned.
Thanks
Diego
Antrax said:
I solved the the broken Flyer problem, Sprint have the Evo View for $150. So I'm getting a new View. Now the problem will be how to transfer the data. I can't get the touch screen to work. I can't unlock it. If I connect it to my PC it's there any way to retrieve the data without using the Flyer touch screen. The screen is completely clear, I can see all the menus but can't use anything because the touch screen don't register the input.
Will try the links that are mentioned.
Thanks
Diego
Click to expand...
Click to collapse
Does that View come with a 2 year contract?
Yes it does.
Ishman said:
You could go with the other option and replace the screen. I replaced my LCD screen on my HTC View (Samething as flyer). It is not a simple job but can get you up and running like new. It is a pain like the new iphone screens. Have to take everything out to get to it. I would recommend getting the LCD ($110) and Touchscreen ($50). These can be difficult to separate but can be done if you take your time and save the $50.00.
I have another one am replacing for someone and will try and post pictures during the process. screen should arrive early next week.
Click to expand...
Click to collapse
I'm currently replacing my screen (have pics on another post). What kind of sticky tape did you use to secure the digitizer?
Sent from my PG41200 using Tapatalk
Sorry to hear.
Get the View for $235 while it lasts.
That's where something like Soti Controller would be extremely useful.
Alas, it does not exist.
If you were on Honeycomb, can you use an OTG cable and a powered USB hub with a USB mouse to navigate? I haven't tried this yet, but it might work.
Hello,
I bought a used EVO3d, seller said It's a refurbished one. I already saw real 3d on another evo, but the screen of the one I have is clearly not 3d. only blurred.
I tried restarting it, resetting the phone with the bootmanager, removing the battery... Still the same. I know of the 3d switch, I tried to play 3d videos, its just not working. I can still record and take 3d pics and videos with the camera but the screen is just blurry.
Is there a chance someone rooted it, had a custom Rom/kernel, then rerooted it and now something is messed up? I checked for root, its not rooted. Bootloader said s-off.
I'll edit in some more info, could you please help me to find out what's wrong? I didn't read about kernels, rooting and custom Roms in detail so I don't know what to do step by step....
Edit: data
Hardware Version 0001
Type: GSM
Bought in: Europe
Model: htc EVO 3d x515m
Android Version: 2.3.4
Htc Sense: 3.0
Software number: 1.20.401.8
Kernel Version:
2.6.35.13-g47321df [email protected] #1 Smp preempt mon oct 3 13:56:34 cst 2011
Baseband Version: 10.59.9020.00u_10.15.9020.06_m
Build number:1.20.401.8 cl 105308 release-keys
Bootloader:
*****locked*****
Shooter_u pvt Shop s-on rl
Hboot-1.49.0018
Emmc-boot
Oct 3 2011.15:03:01
Maybe you should check what kind of LCD panel do you have.But I am not sure if you can change it to a normal not 3d panel.It is just a guess.. I checked mine and it says Sharp.And if I am correct it is the only panel in the EVO3d.But then again I may be wrong.
Sent from my HTC EVO 3D X515m using Tapatalk 2
Yea, there is no way to change out a 3d screen for a 2d one. Since your bootloader is locked, it's likely the device has never been rooted. Try doing a factory reset, that will clear up any software bugs.
I saw on the news that there was a guy who bought 3d Tv's and then switched the 3d panel for a regular one and then brought it back to the store claiming all sort of things. I just thought it was possible.Means I was wrong.
Sent from my HTC EVO 3D X515m using Tapatalk 2
I did a factory reset both in the settings (SD card, privacy) and through the boot manager(vol down+power). What else can I do?
Screen: 4.3 inch qhd resolution
I can't find "sharp" in the hardware information..!
Doh, I just realized it gets relatively hot during minimal use.
Hmmm.......
I would unlock the bootloader first. Its says S-Off?
Try flashing some older GB roms and see if you get 3D to work.
I highly doubt they changed the screen to anything else.
This is why I'd never buy a used phone.
Anyway, I think you can get the thing working.
I assume its GSM?
berbecverde said:
I saw on the news that there was a guy who bought 3d Tv's and then switched the 3d panel for a regular one and then brought it back to the store claiming all sort of things. I just thought it was possible.Means I was wrong.
Sent from my HTC EVO 3D X515m using Tapatalk 2
Click to expand...
Click to collapse
With a tv, yes it is, because there are many tv's that are the same size as others. For this phone, there is no other phone with this same exact size and same exact connectors.
some phones just bad
my girl got a referbished phone from sptint and it reboots and locks like twice a day.
If you recently got it you can still get TEP on it even if it was bought from craigslist. Then a few days after come in with the Evo and say it's 3D stopped working.
I can confirm this works as my friend did it before
Edit nvm your GSM
Sent from my Evo 3D on Sprint's blazing fast 3G network with 4G coverage everywhere
The display of the Evo3D has 3 sandwiched components: the display itself followed by the parallax barrier and then the touch digitizer.
Usually you are using the 2D functions of your display and in these situations the parallax barrier is turned off. When you start using 3D, what happens is as follows:
The horizontal resolution of the display is divided by 2 (thus, 960/2=480);
The software in the phone then displays one image for each 2nd pixel and another for the intermediary ones (thus showing 2 different but interlaced images; ex: http://viscg.uni-muenster.de/sim2d3d/img/windows_menus_maya_vi_1600x1200.png ).
The next trick, is to show each eye only one of the 2 images; This is where the parallax barrier comes in. When it get's activated, it forms small ~1 pixel width barriers in front of the LCD unit so that from a certain distance (the sweet spot) each eye can only see one of the 2 images (it's a bit tricky to explain binocular vision).
From what I understand, it seems that you have a problem with the parallax barrier component of the display. It may be software related, though I doubt it.
If you still have the warranty seals intact, don't touch the software. Try to get it into a authorized service and get it serviced under the warranty.
universallyhot said:
my girl got a referbished phone from sptint and it reboots and locks like twice a day.
Click to expand...
Click to collapse
Is that a question? Or just a statement?
hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
_Intel_ said:
hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
Click to expand...
Click to collapse
is the phone rooted and if so, is it a custom rom?
How much of it isn't working? And is it just unresponsive or is the display out as well?
I have a strip of my screen the doesn't work that's righty over where the top row of keys is.
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
_Intel_ said:
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
Click to expand...
Click to collapse
So is it just a strip of the screen?
If you really really wanna be able to get it unlocked, Download the correct version of clockwork mod for our phone one that's not touch, has to use the volume rockers and fresh install the rom, Or as a matter of fact, Just boot into whatever recovery you have and clear data/factoryreset, that'll get rid of your lock pin
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Common Hardware Problems on evo3D
Its the hardware. and your carrier should change it at no cost. (Sprint)
fatisis said:
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Click to expand...
Click to collapse
ive had the top bar just under my notification bar non working for a few months now, and its starting to pi$$ me off
I've replaced my digitizer twice myself. I got a cheaper one the first time, and figure that's what I get for trying to go on the cheap. (I was out of warranty). Sorry to say it but it could be that again.
Sent from my shooter using xda app-developers app
I think I don't have a warranty because I've changed it myself. It's my fault...
I think I'll buy a new one... I unscrewed it a while ago so I could see if sth had been misplaced or if the digitizer had scratches or sth like that.
I saw that the ribbon's top had been ripped off right where it bends on top of the LCD... Don't know if that's the problem...
p.s. I live in Greece. My carrier is Cosmote. We don't have Sprint here...
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
toad6386 said:
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I wonder why is there only one part of the touch that doesn't work if the ribbon is like that, in the bending spot...
thank you! i'll try it as soon as i can and i'll get back!
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
fatisis said:
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
Click to expand...
Click to collapse
The last one I got from Amazon is the one I'm using now (about a month old), and spent $20 US on it, which was NOT the cheapest of them. Not knowing the exchange rate right off hand, would venture to say the one you're speaking of is not a "cheap" one. So go for it. Just take your time replacing it and be careful with ALL the ribbon cables. Good luck!
My phone is sliped from my hand and fall down on the floor in screen side.
I picked up and the phone work fine.
But after sometime its screen stop working.
Sometime work sometime not.
It's screen problem or my device software.
I have miui stable ics Rom.
Thanks to all member for there suggestions and help.
I know you help as you can .
gursewaksinghsandhujatt said:
My phone is sliped from my hand and fall down on the floor in screen side.
I picked up and the phone work fine.
But after sometime its screen stop working.
Sometime work sometime not.
It's screen problem or my device software.
I have miui stable ics Rom.
Thanks to all member for there suggestions and help.
I know you help as you can .
Click to expand...
Click to collapse
Evo or 3D? Well 3D digitizer fails often, that's why phone was discontinued so quickly. But digitizer is easy to replace.
jcfunk said:
Evo or 3D? Well 3D digitizer fails often, that's why phone was discontinued so quickly. But digitizer is easy to replace.
Click to expand...
Click to collapse
HTC EVO 3D X515m. Made in taiwan ( Europe )
Thanks for your reply please help me sir .