i have a rooted at&t lg e970. i wanted to unlock the bootloader and install recovery on it. so i downloaded freegee,followed all the steps and twrp was installed on my phone. but when i decided to take a back up of my phone,it got switched off and now it wont boot . vol.up + power also takes a ridiculously long time to boot and doesn't work everytime. when vol.up+power does work, i get a recovery screen with power off,recovery,restart bootloader as options. but whichever option i select,i get a google screen and the phone shuts down. any help in this regard would me much appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i'm getting this message when i try to restore my phone using lgnpst.
i'm getting this message when i try to restore my phone using lgnpst.
can someone help me with this? phone doesn't boot at 67% or 85%. an gives the above error. any help would be greatly appreciated.
Volstagg.The.Valiant said:
can someone help me with this? phone doesn't boot at 67% or 85%. an gives the above error. any help would be greatly appreciated.
Click to expand...
Click to collapse
Does it do anything, like make it to the Rethink Possible screen and then hang?
Volstagg.The.Valiant said:
can someone help me with this? phone doesn't boot at 67% or 85%. an gives the above error. any help would be greatly appreciated.
Click to expand...
Click to collapse
If you look at the read me file it states that 67% and/or 85% means it's complete. Disconnect your phone and reboot. If it gets stuck after the LG splash, then you need to factory reset/wipe data. Hold the pwr button down for 12-15 seconds to make sure the phone powered off. Then press the vol down + pwr to get into the stock factory reset menu.
Sent from my Optimus G using xda app-developers app
adfurgerson said:
Does it do anything, like make it to the Rethink Possible screen and then hang?
Click to expand...
Click to collapse
no at 67% phone tries to reboot and LG start screen appears and then it goes into a loop
mikeylikey said:
If you look at the read me file it states that 67% and/or 85% means it's complete. Disconnect your phone and reboot. If it gets stuck after the LG splash, then you need to factory reset/wipe data. Hold the pwr button down for 12-15 seconds to make sure the phone powered off. Then press the vol down + pwr to get into the stock factory reset menu.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
i'm getting the factory reset menu and even after confirming the reset phone doesn't boot up
Which freegee did you use, the PC program or the play store app? You may want to try the teenbin alt. with lgnpst, you will need a ROM copied to your SD card to flash from recovery after running teenybin.
adfurgerson said:
Which freegee did you use, the PC program or the play store app? You may want to try the teenbin alt. with lgnpst, you will need a ROM copied to your SD card to flash from recovery after running teenybin.
Click to expand...
Click to collapse
i used the freegee play store app. i shall try the lg dll file with teenybin alt with a ROM in my SD card for flash. problem is even teenybin doesn't seem to work. anyways i shall try this today when i get back from work and shall report on the progress. thanks for helping.
so i tried to flash teenybin to try and install recovery. but at 67% phone tries to reboot but is not rebooting. and then i get a msg saying that the connection to the phone has been lost. tried the same with teeny altbin also. getting the same response.
can someone explain what i'm doing wrong?
so i tried to flash teenybin to try and install recovery. but at 67% phone tries to reboot but is not rebooting. and then i get a msg saying that the connection to the phone has been lost. tried the same with teeny altbin also. getting the same response.
can someone explain what i'm doing wrong?
Sounds like you're bricked.
Sent from my LG Optimus G using XDA Premium 4 mobile app
DeathmonkeyGTX said:
Sounds like you're bricked.
Sent from my LG Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
any solutions to un-brick my phone?
Volstagg.The.Valiant said:
so i tried to flash teenybin to try and install recovery. but at 67% phone tries to reboot but is not rebooting. and then i get a msg saying that the connection to the phone has been lost. tried the same with teeny altbin also. getting the same response.
can someone explain what i'm doing wrong?
Click to expand...
Click to collapse
This is where you you should boot into recovery to flash ROM. Volume up plus power to get to fastboot, with alt you should be able to see recovery menu. If not it will be volume down twice then power.
quick update: installed teenybin successfully and got into recovery mode. but in recovery mode, if i select recovery option and press power button, the google logo flashes and the phone turns off. suggestions?
I'm having the same problems. These teenybins are broken. One stalls at the LG logo after rebooting at 67% with a disconnect, bricks with no bootloader/fastboot. The alternate reboots at 67% and stalls at 85% as well with a Google logo that I've never had before, and then my rom crashes everything I open constantly, e.g. not even able to bring up a keyboard. Both have killed my ADB/fastboot completely.
fierogt42 said:
I'm having the same problems. These teenybins are broken. One stalls at the LG logo after rebooting at 67% with a disconnect, bricks with no bootloader/fastboot. The alternate reboots at 67% and stalls at 85% as well with a Google logo that I've never had before, and then my rom crashes everything I open constantly, e.g. not even able to bring up a keyboard. Both have killed my ADB/fastboot completely.
Click to expand...
Click to collapse
Stalls ? That's what's suppose to happen. The Google logo is normal, I have that too. Your ROM crash ? Flash another one in recovery. Teenybins fixed my phone, I don't think they are broke
---------- Post added at 03:48 PM ---------- Previous post was at 03:43 PM ----------
Volstagg.The.Valiant said:
quick update: installed teenybin successfully and got into recovery mode. but in recovery mode, if i select recovery option and press power button, the google logo flashes and the phone turns off. suggestions?
Click to expand...
Click to collapse
You still have fastboot and are able to enter download mode so I think your fine. If no recovery, try to do the bin again after reading the instruction thoroughly. The bins work, it fixed my phone. You may have messed it up somewhere
Maybe I should be more specific. My previous rom that worked perfectly crashed constantly after the teenybin. One teenybin locks me out of everything but download mode, including recovery, and both teenybins also have made my ADB & fastboot stop working completely. Tell me that's normal too.
fierogt42 said:
Maybe I should be more specific. My previous rom that worked perfectly crashed constantly after the teenybin. One teenybin locks me out of everything but download mode, including recovery, and both teenybins also have made my ADB & fastboot stop working completely. Tell me that's normal too.
Click to expand...
Click to collapse
What's normal is I only tried to help and you continue with your attitude you will just have to help yourself
Related
Hi all,
On a regular P500 with stock Android 2.2, build FRF91, software version LG-P500-V10b, the yellow screen Emergency Mode!! appeared after a regular restart and would go any further. I couldn't connect this situation to any of the apps that were installed.
Also, on regular usage, the Emergency mode scrren may appear out of nowhere and the phone is off the network.
This phone is used by my wife, she's not a hacker, she just want's to sleep the baby with melodies from this phone.
If I let the battery out for more that 15min it will boot back the normal way, but it isn't seen by Windows, it senses the device when plugged in but it says "device unplugged"
I followed several guides in the forum, and I saw there are two ways of writing something to the device:
1. "downgrade" the phone to the original firmware, like here Guide for newbies - LG OPTIMUS P500
2. write a new ROM, like here [ROM] (OFFICIAL) [email protected]_2.3.3_v2- Power Menu +franco-kernel+New Boot+ How to Guide
My obvious problem is the phone not being seen by Windows. I started it on purpose in Emergency Mode with Vol up+back key+Power and it appeared in device manager as LGE Mobile USB modem #2.
First I tried to write a new ROM, like at point 2. above, with LGMDP THUNDER v1.5, but I run into this error, after pressing the Start (write ROM button): Error! Partition Table. Here is a screen shot.
The I tried the other option, to "downgrade" the phone to the original firmware, with KDZ Updater.
I found V10E_00.kdz, although I think I should use V10B but I didn't found it. Search on this forum is a pain because it works one time in a hundred (it says something about maintenance).
KDZUpdater did its job successfully but the phone rebooted and halted on "Android" screen, that's it. Then I removed the battery, powered it back up and, surprise, my friend the Emergency Mode!! is back again.
So this phone doesn't seem to be bricked, nor isn't stuck forever in emergency mode, but also is not reliable anymore because of the emergency mode appearing randomly.
Please, slap me in the face with a link saying "dude, search worked for me an here's the fix".
What I can tell you for sure is that I didn't saw the partition table error before on this forum.
hmm... try again with kdz with correct version and do all things again but wait until all works done. don't be so fast
and come here again and tell what happened
If it is stuck on android logo after flashing kdZ, take out battery and press voldown+home+power button to hard reset
Sent from my LG-P500
Indeed it was stuck on the android logo after flashing with KDZ. Hard reset worked!
Thank you! Thank you! Thank you!
After this I had Android 2.2.2 running, then I started LGMobile software updater Agent from LG PC Suite and it updated the OS to 2.3.3. After finishing, the phone rebooted to Emergency mode again, but I did another hard reset and now it works perfectly, it reboots properly.
I guess the root problem was a corrupt file system.
A little offtopic since we are at it. for you guys what proved to be the best rom/kernel combination for best battery life?
Thanks again!
Later edit:
New updates: the phone doesn't behave normally as it began above. Later after the update, I tried to connect the phone to Windows PC and surprise, it didn't saw it as it was supposed to, the problem encountered at the beginning of this post reappeared:
Device driver software was not successfully installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Although I have the correct drivers, because when I connect a friend's LG P500 it is seen properly.
After this, I rebooted the device and, surprise again, it booted to Emergency Mode. I unplugged the battery and let it for a while, then it booted normally but still it isn't seen by Windows.
Is this a software (ROM/Kernel) issue or a hardware issue?
I mention the my friend's LG P500 has the same factory provided update with Android 2.3.3, build GRI40, soft version V20g, kernel 2.6.35.10-perf [email protected] #1 and it doesn't have any problems.
Update: I can not even charge the device after I power it down. When I insert the charger, the emergency screen appears right away and it stays that way. I don't know even if the device is charging.
The workaround is to unplug the battery and leave it for 15-30 min or more and then it starts properly, but the problem in the post above is still present.
lmihaila said:
Update: I can not even charge the device after I power it down. When I insert the charger, the emergency screen appears right away and it stays that way. I don't know even if the device is charging.
The workaround is to unplug the battery and leave it for 15-30 min or more and then it starts properly, but the problem in the post above is still present.
Click to expand...
Click to collapse
Just try using froyo, dont upgrade to gingerbread, and see the problem still persist.
aspee said:
hmm... try again with kdz with correct version and do all things again but wait until all works done. don't be so fast
and come here again and tell what happened
Click to expand...
Click to collapse
What is supposed to be the correct version? I tried these rom's: V10A_00.kdz, V10B_00.kdz, V10E_00.kdz, V20B_00.kdz with KDZ Updater in all possible combinations and got the error "Upgrade error WParam:100. LParam:502" at each attempt.
terratrix said:
If it is stuck on android logo after flashing kdZ, take out battery and press voldown+home+power button to hard reset
Sent from my LG-P500
Click to expand...
Click to collapse
Now this doesn't work anymore, it starts into the Emergency Mode each time.
terratrix said:
Just try using froyo, dont upgrade to gingerbread, and see the problem still persist.
Click to expand...
Click to collapse
I can not flash any rom on it, it stays in the Emergency Mode screen. It is the same thins I mentioned to Aspee above.
Is my phone bricked?!
Now what?
My phone was acting wack so I decided to reboot and all of a sudden I saw the same screen that you are experiencing, but I just battery pulled and everything went back to normal. I have yet to experience this yet again though. (Running 6.5.7? CM7/Franco's kernel v19.?) Happened a while ago don't remember versions. I know I'm not much help but just saying I got this problem as well .
lmihaila said:
What is supposed to be the correct version? I tried these rom's: V10A_00.kdz, V10B_00.kdz, V10E_00.kdz, V20B_00.kdz with KDZ Updater in all possible combinations and got the error "Upgrade error WParam:100. LParam:502" at each attempt.
Now this doesn't work anymore, it starts into the Emergency Mode each time.
I can not flash any rom on it, it stays in the Emergency Mode screen. It is the same thins I mentioned to Aspee above.
Is my phone bricked?!
Now what?
Click to expand...
Click to collapse
if you have emergency mode theres always a chance your phone flash by kdz delete all drivers follow the tutorial on kdz and install the drives they provide and try more then one time because when hi the 1 and last time hi use lg mobile updater to update my phone it stop in midlle and hi was stuck in emergency mode,i tried a lot of times some times windows dont detect my phone others it do but kdz dont i dont count but only several times of tryng the kdz works...
but emergency mode random i never read or see in my phone if you get it work on froyo or gingerbrad and that still happens hi think you should go to warranty and say that in a midle of update byLG software your phone stay that way they will fix it....
Reminder: my phone boots to Emergency Mode after you power it off. While in emergency mode, if you unplug the battery it will boot the same way. If you leave the battery out for more than aprox 15 min, it will bot the OS it has written on it. Why??
After more an more hours spent on it I can conclude to this: my phone is to be seen by Windows only in emergency mode. I was able to flash it with KDZ while in emergency mode but with errors (Upgrage error: Wparam:100 LParam:6).
I was able also to flash it once with LGMDP but it stayed in the emergency mode screen and didn't rebooted itself, so again with an error.
I flashed it with both V10B and V20G and it behaves the same: while in Android, it isn't seen by Windows (with or without USB debugging) and if you reboot, it boots to Emergency Mode. Why??
it´the first time hi read something similar but if you cant or if you have a chance to try in other pc do it but if you cant leave that way take to lg center service and tell them that was making oficial update from their program and phone stuck like that they will fix it for free i dont now how to help you
I tried to connect the phone on three different machines, two Windows Seven and one XP. On XP I had the most success with flashing the phone.
sir lmihaila, i have the same problem. exactly the same. been following this thread since you posted it, still no solutions, got this phone cheap from a friend, it was on LG stock rom, not sure what he did on it, but it already was doing the Emergency mode.
i update a month ago to CM7, tried different kernels and roms, it was still happening on all of them, was about to try kdz, but then i saw your post saying it didnt work..
so until we found a solution, i guess we never turn phone off, or if it did, leave battery out, mine works out of Emergency mode after 5 mins of battery out.
bajie23, I'm glad you posted.
Indeed there is no solution yet, but I did some progress today. I played with the phone with it's battery unlugged and plugged his power adapter.
On a normal P500 the LG logo would appear and it would tell you to put the back cover and battery back. On mine, guess what, the emergency screen appeared.
But with a little knack, I pressed vol down+home+power and plugged the power adapter at the same time and the LG logo appeared as at a normal P500.
Then I inserted the battery, the device showed another wired attention triangle and Android System Recovery logo popped up, then I pressed Home and the Android System Recovery menu appeared. See pictures:
http://imageshack.us/photo/my-images/846/20110915230511.jpg/
http://imageshack.us/photo/my-images/16/20110915233836.jpg/
I could move trough the items in there with vol up - vol down but I couldn't press OK because none of LG P500 button did anything regarding this. I prepared even a new ROM on the SD card, renamed it to update.zip like in the Android System Recovery menu, but in vain because I cannot validate an action.
I exited this mode by unplugging the battery and power adapter,
I tried once again to enter Android System Recovery but I couldn't pass over the emergency screen anymore.
Just for the record, when you shake your phone do you also hear a little piece of something moving in the upper part of the device, right behind the earpiece? Does your handset has dropped marks? Has it ever been dropped, hit?
On my friend's functional P500 this noise isn't heard.
LS: bajie23, you said you tried different kernels and roms, how did you flashed them?
that was my first post. registered here just for this issue.
no moving parts inside, haven't dropped phone yet, no damage showing it has been..
i used clockworkmod recovery to flash - try to google it, there are tutorials, but i cant post links yet on this forum.
i installed recovery mode using "rom manager v4.3.1.3" app..
it simply instals recovery mode on start up. you can go to it by holding volDown+home+power. then vol up and down to navigate, menu button to select.
you can instal. zip from your sd using recovery mode.
problem is with our phone, booting in recovery mode gets you to that F&*%In "Emergency mode!" screen. you need to keep battery detached for 3-5 mins, put battery back then hold volDown+home+power, do not let go until the recovery screen appears.
you can instal kernels and roms using recovery mode, there are options to wipe the cache and everything, tried all of them, but guess what? still F^&*% "Emergency mode"
looks like our problem is deeper than the start up..
*next thing i will try is to revert back to original rom, try to unroot, and see if it helps, even though it doesn't appear to be on the rom or kernel.. then i'll try your step to see if i can get partition table error as well..
**i remember seeing on a site saying Emergency mode is like a test mode for lg that they use to flash..
Hi folks,
I have a Optimus One in the same condition. I tried to update Android to Gingerbread using the LG software and now it's pretty much always in "Emergency mode". I'didn't find any way to flash it again even with the stock rom. It seems that the usb port is not working correctly...
I'm using this procedure to let my P500 boot in "normal" way, and so far it seems to be working:
1) while the O1 is in Emergency mode, and the battery is almost fully charged, connect the charger a few minutes, let's say, 3 -5 min.
2) after that, remove the charger plug AND the battery
3) replace the battery on the phone
4) press the power button for 1-2 sec.
The phone should boot normally.
This procedure doesn't solve the "emergency mode" issue, but at least makes the phone usable.
Update: this procedure isn't working now!
I got this problem, too.
Bought LG P500 on 12nd november, updated to GB 2.3.3, no problems for 20 days.
Then trying to connect to PC I notice that it couldn't see it, nor SD and the phone, too.
After connecting to USB if trying to reboot the device it goes into emergency mode.
After pulling off the battery for 5 minutes it reboot normally but it is still not seen by the Pc.
After removing the battery and booting normally if I try to reeboot again in goes normally.
So I suppose that there is something conflictting connecting to usb that avoid to boot until memory cleared (battery removed).
I sent the device to LG, yesterday, hope they solve the problem, usb issue?
What about you?
partition table error is due to missing of partition.mbn file during selection of files to flash.
to install custom recovery you can follow http://forum.xda-developers.com/showthread.php?t=1318750 (partition file is included here use it if u want for some other purpose, it will be same for p500/optimus one as far as i know)
then flash rom from recovery follow http://forum.xda-developers.com/showthread.php?t=1309744
And if you are stuck at boot logo after flashing rom then factoryreset/format from recovery.
aFTER booting into rom if you see no gsm signal then upgrade baseband using http://forum.xda-developers.com/showthread.php?t=1217504
or
flash any other stock rom http://forum.xda-developers.com/showthread.php?p=19006040#post19006040
or
http://forum.xda-developers.com/showthread.php?t=1324105
mak.3736 said:
partition table error is due to missing of partition.mbn file during selection of files to flash.
to install custom recovery you can follow http://forum.xda-developers.com/showthread.php?t=1318750 (partition file is included here use it if u want for some other purpose, it will be same for p500/optimus one as far as i know)
then flash rom from recovery follow http://forum.xda-developers.com/showthread.php?t=1309744
And if you are stuck at boot logo after flashing rom then factoryreset/format from recovery.
aFTER booting into rom if you see no gsm signal then upgrade baseband using http://forum.xda-developers.com/showthread.php?t=1217504
or
flash any other stock rom http://forum.xda-developers.com/showthread.php?p=19006040#post19006040
or
http://forum.xda-developers.com/showthread.php?t=1324105
Click to expand...
Click to collapse
I had this problem (not the partition table error) not after a flashing but after 20 days past the flashing, before everything was well.
What can be happened?
I realized that there is something wrong with some LG500 motherboards, regarding USB connections. I too tried to flash the phone using LGMDP but I always got the partition table error. My phone, either in Emergency or in normal mode, is always recognized by the PC thru the USB, but when it starts to communicate it locks ... I cannot flash anymore, and actually it seems that USB port is useless.
I know that there are some special cables, apparently suitable for LG500 too, that can set the device in "download" (emergency?) mode, they use a 130k resistor somehow. If this is real, probably some motherboards are faulty, putting randomly the device in emergency mode, even without the mentioned cable. Pullup/pulldown resistor missing on MB? At first attempt to communicate, the USB controller of the phone locks, probably getting an undefined state. This is my impression.
Since my phone is still under warranty I settled to bring the phone to LG repair service...
I have tried everything on my wife's I9001 but I cannot get Odin to get past SetupConnection.
Here is a picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried:
Redownloading Odin 1.3 and 1.85 and also tried using Multi Downloader 4. (Which says that the .md5 file isn't supported).
Changing USB ports.
Using a Jig to boot Download mode.
Booting into Download mode normally.
Installing MobileODin except that I9001 is not supported.
Trying to flash a different rom other than 'I9001XXKQ1_I9001XXKPI_I9001DBTKP1_HOME.tar.md5'
Rebooting the computer over 9000 times.
Rebooting the phone over 9000 times.
Pulling the battery over 9000 times.
Reinstalling the drivers from Kies.
Turning USB Debugging mode off (was worth a try)
Using a different computer.
Reinstalling my OS (seriously, I had to do that anyway)
Leaving the phone plugged in for 30 minutes anyway just to see if it was working but not updating.
I am unable to boot into 'Recovery Mode' also the phone sh!ts itself and boots into 'RAM Dump' instead... where it requires a battery pull to reboot. So I can't even put the rom file on the internal memory and use recovery mode to flash it from there...
Basically nothing works at all. Odin 1.35 fails, Odin 1.85 fails, Multidownloader fails. I have tried rebooting, restart, and re-bloody everything I can. I have no idea why it won't get past setup connection. I've even tried using my second USB cable. It used to work fine, I used to be able to flash the phone fine.
Kies is NOT running in the background... there are no processes open or anything. I have googled and yahooed and everything to find a solution to this. NOTHING works..
Please help. I need to flash this dhfshfgdshgfshs phone as soon as possible. It's not working properly and it's really unstable..
If someone has any suggestions I am so willing to hear them..
Thanks a lot. - From a really frustrated dude
leijonasisu said:
I have tried everything on my wife's I9001 but I cannot get Odin to get past SetupConnection.
Click to expand...
Click to collapse
When you booted your phone, are you REALLY sure that you go into Download-mode?
When i was doing the same thing as you, i just enter Android Recovery (pressed Home+Vol Up+Power instead of pressing Home-Vol DOWN+Power)
Im not sure what buttons on your phone because im having a Note.
If you find this helpful, you could click Thanks
Thanks mate but I worked it all out. For some reason my I9001 wasn't being flashed in Odin properly like I explained. I accidentally screwed up my download mode. Sometimes I could get into Download mode by holding the corresponding keys. Volume Down + Home + Power. Sometimes the phone would just go black with a white dot at the top left corner.
Using a Jig I was able to boot into download mode without hassle. I then used Multi Flasher 4 to flash my phone seeing as no matter what Odin 1.85 and 1.3 would not work.
After that I did a factory reset so the phone was basically flashed twice. Everything seems to work well now. Before the factory reset the phone would just get into a boot loop.
Thanks anything. FeMod or whatever the clockworkmod for the I9001 is, wasn't working either. It would just go blank when I chose an option.
It's ok now. Thanks anyway but this can be closed.
Make sure Kies is not running. That was preventing me from connecting. :good:
Odin and xdadevelopers suck
Odin is buggy. Works on and off.
xda sucks because the owners of the site will have a single applicatoins dependencies spread across as many pages as possible in order to increase views and click through rates and sell ads to say, Bell Telecom perhaps?
F*n dicks at xda far as I'm concerned.
Wasting everyone's time and polluting the search results space.
Amen.
just do that
just enable usb debbuging
thanks
edwin_chenyh said:
Make sure Kies is not running. That was preventing me from connecting. :good:
Click to expand...
Click to collapse
Thank you alot bro. i was searching problem about half a year. you saved my life
I have the same issue with my Samsung Galaxy s2 (GT-i9100).
- Yes, Its really in download mode
- Have tried alot of diffrent versions of odin
My phone suddenly stopped working, can't start recovery and it doesnt boot at all.
The only thing I can do with it now is to enter download mode.
I might have flash something bad... dont really remember at all.
Had kies installed both the first version and klies3, all uninstalled now without any change...
THX
you're great, thank you very much bro : Iyi:: Iyi:: Iyi:
Hi i have n915f samsonge note edge after last update very restart or frizz when i work whit and go on downloading mode with out i press any key.i go recovery mode and wipes cach drive and restart on factory but Dissolving problem.when i want flash whit odin and turn on debugging mode not turn on my phone but when put cabe onit and hold power+Home +and volum key go on downloading mode.and detects with odin but when start stuck on setup connection.
Please help me.
Hey all,
I have unlocked my bootloader all went fine, then I flashed TWRP recovery but if I try to adb boot into recovery I get a screen with a little green android guy saying no command and if I do it manually I get the very same screen, what should I do? Should I try CWM or is this a bug I can fix?
Thanks k.. :good:
Please I am really stuck, I have tried flashing TRP a few times and even CWM to get root but anytime I boot to recovery I just get a green android guy with a red triangle coming out with a ! mark and under it saying No Command Please please help me out I have been reading and searching and cant get my moto e to boot into TWRP or CWM my bootl;oader is unlocked. All I am asking for is why am I getting this screen with the no command and what can I do to get into recovery so I can root my phone and flash a ROM.
:EDIT:
This is the Pic that comes up when I reboot into recovery only under the android guy it says no command
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please someone, anyone help me i am really stuck on this and cant find a way out
RiceydDr0id said:
Please I am really stuck, I have tried flashing TRP a few times and even CWM to get root but anytime I boot to recovery I just get a green android guy with a red triangle coming out with a ! mark and under it saying No Command Please please help me out I have been reading and searching and cant get my moto e to boot into TWRP or CWM my bootl;oader is unlocked. All I am asking for is why am I getting this screen with the no command and what can I do to get into recovery so I can root my phone and flash a ROM.
:EDIT:
This is the Pic that comes up when I reboot into recovery only under the android guy it says no command
Please someone, anyone help me i am really stuck on this and cant find a way out
Click to expand...
Click to collapse
I thinl twrp not installed properly try cwm and install twrp over it
K I think I've done that already and keep getting the same screen... What's the latest cwm n twrp? I'll try some other methods of getting cwm on it.. Thank u for our reply I am getting stressed not getting into recovery to get root ughhh
Nope, still no joy getting the same screen... What is going wrong? Iv tried all d different methods on here followed them to a t but still can't boot to recovery. Plz help me out, I'm stressin big time!
after u flashed custom recovery...from fastboot.... don't reboot..... open recovery ..from fastboot(using volume buttons) just after flashing...... .. your custom recovery will be executed and it will stick ...
ps:- the green android screen with triangle..which is opening.....is stock recovery ......follow this method and your custom recovery will work
press thanks if i helped
OK I'll give it a try now, think I've tried that way already, I will flash TWRP again and try what you said.. I'll report back as soon as I've it setup. Thanks will be gave just for taking the time to try help work r not work u are trying to help... Thank u.
P.s How do u thank someone from the XDA App? :-?
Got it thanks gave 2 both ye guys r girls keep the help coming ikts appreciated!! I'll try flash now )
Lads I'm still getting no joy here :-/ iv used rookjunkies .bat super tool iv used other methods, nothing has worked. What am I doing wrong!?!?
RiceydDr0id said:
Lads I'm still getting no joy here :-/ iv used rookjunkies .bat super tool iv used other methods, nothing has worked. What am I doing wrong!?!?
Click to expand...
Click to collapse
have u done what i have told u to do ?
please explain your flashing process...
after flashing using fastboot DONT reboot..... go to recovery immediately
RiceydDr0id said:
Lads I'm still getting no joy here :-/ iv used rookjunkies .bat super tool iv used other methods, nothing has worked. What am I doing wrong!?!?
Click to expand...
Click to collapse
That's usually seen when you reboot to the Recovery menu. When you see that screen, press and hold Power, then press the Vol Up button at the same time. If you see the Recovery menu appear (it's in a small system font), use the volume buttons to highlight "reboot system now," and press Power to execute.
Failed to reboot into recovery mode from bootloader after flashing custom recovery
dchatterjee172 said:
after u flashed custom recovery...from fastboot.... don't reboot..... open recovery ..from fastboot(using volume buttons) just after flashing...... .. your custom recovery will be executed and it will stick ...
ps:- the green android screen with triangle..which is opening.....is stock recovery ......follow this method and your custom recovery will work
press thanks if i helped
Click to expand...
Click to collapse
Hi,
I tried your solution but unfortunately it's not working on my side.
I followed below steps,
1. Booted into fastboot mode.
2. Flashed custom recovery successfully. (tried both clockwork and twrp).
3. Tried to reboot into recovery mode by selecting option recovery from same screen of fastboot mode. phone flashes the as usual warning(bootloader unlocked) and gets turned off. Waited for 10 minutes but didn't reboot into recovery mode.
4. Pressed the power button and system reboots normally.
5. Again tried to reboot into recovery mode and facing the stock recovery not the custom one.
Any help?
Manish.android said:
Hi,
I tried your solution but unfortunately it's not working on my side.
I followed below steps,
1. Booted into fastboot mode.
2. Flashed custom recovery successfully. (tried both clockwork and twrp).
3. Tried to reboot into recovery mode by selecting option recovery from same screen of fastboot mode. phone flashes the as usual warning(bootloader unlocked) and gets turned off. Waited for 10 minutes but didn't reboot into recovery mode.
4. Pressed the power button and system reboots normally.
5. Again tried to reboot into recovery mode and facing the stock recovery not the custom one.
Any help?
Click to expand...
Click to collapse
I was also struggling a lot into getting twrp and cw loaded on to a Moto E. The problem was that I was pressing the Power button to activate the recovery menu and that will not activate the recovery option. You got to press the UP button instead of power. This is quite counter intuitive but described well in most posts, but as experts we assume up button is to go up the menu.
Sunish Issac
Please help me
Hope your phone can boot into fastboot mode.
Download and Flash the TeamSpain 15S recovery from here
Boot into fastboot mode. Turn the Phone off -> Power on using (Power button + Volume down). Connect to your PC and make sure Fastboot drivers are installed.
Pass this command fastboot flash recovery TWRP5.8TeaMSpaiNRevolution_15s.img assuming the recovery img file and fastboot are in the same directory.
Boot into recovery by pressing (Power + Volume Up) button combo. If you get Blue Led of Death, keep Power + Volume Up buttons pressed till phone boots into recovery.
Download TeamSpain Revolution 15s EUI ROM from here
In TWRP, Adb sideload the above rom.
Thank you I will try
Thank you I will try. please help me.
Can you tell me any detail.
Can you tell me any detail.
jakkapongjames said:
Can you tell me any detail.
Click to expand...
Click to collapse
What detail?
I change rom from model china x820 to indian x821. I try install TWRP but my devices just booted to a black screen with the blue led. I can try many method but doesn't work. it's show only quadcomm driver. what should i do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi my le max 821 is also soft bricked can any one help please? It is going to fast boot mode, i have tried installing TWRP. It has shown that twrp has been installed, but when i tried to get into recovery it is showing a flashing blue screen and immediately the entire screen is going dark. Please some one guide me. Thanks in advance.
AJJU1972 said:
Hi my le max 821 is also soft bricked can any one help please? It is going to fast boot mode, i have tried installing TWRP. It has shown that twrp has been installed, but when i tried to get into recovery it is showing a flashing blue screen and immediately the entire screen is going dark. Please some one guide me. Thanks in advance.
Click to expand...
Click to collapse
You need to flash the correct recovery for 15s firmware. It is from TeamSpain.
Follow the instructions from this post. Click here.
sanke1 said:
You need to flash the correct recovery for 15s firmware. It is from TeamSpain.
Follow the instructions from this post. Click here.
Click to expand...
Click to collapse
Thanks Mr. Snake 1, will try this one and let u know the result.thanks again.
AJJU1972 said:
Thanks Mr. Snake 1, will try this one and let u know the result.thanks again.
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
Click to expand...
Click to collapse
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
AJJU1972 said:
Hi snake i tried this but no luck. But the good thing happened to me is, that after a long time i am able to get into the recovery. the "twrp" is working fine. I have downloaded the CM13 rom from your 'mega' link and adb sideloaded it, but it is not booting into the system, rather getting into boot loop again. The same blue screen is flashing and going dark, as earlier.
Can you please guide me, what am i doing wrong. I tried formating the system partition also(lost the stock rom also). Waiting for your respond. Thanks.
Click to expand...
Click to collapse
You have flashed 15s recovery and booted into CM ROM which is based on 14s or vice versa.
If you have flashed 15s recovery from TeamSpain, make sure that you flash CM ROM which is based on 15s or 16s only.
sanke1 said:
You have flashed 15s recovery and booted into CM ROM which is based on 14s or vice versa.
If you have flashed 15s recovery from TeamSpain, make sure that you flash CM ROM which is based on 15s or 16s only.
Click to expand...
Click to collapse
Thanks Mr. Snake1 finally i got my mobile working after a long time. Testing weather or not all the features are working. Post again with the results. Thanks a lot for your support.
Leeco le max 2 dead without system ...
good personal afternoon, I'm new here and I need help, I have a le Leeco max 2 and he came into loop after a atualizção for rom cuoco92, there installed TWRP the temspain downloaded the rom also the teamspain 15s and do the procedure by adb sideload and sometimes the protocol fail or lock in 47% already tried in every way to recover the device, tried to at OTG more this TWRP does not recognize the OTG cable, can anyone help me give me a light please, I'm the device locked to 1 month ...
A fix for hard brick you can find here http://www.letv.re/topic/1471-unbrick-le-max-2-qfil-rom/
Got the same problem but much worst.
I kind of have the same problem. But its different in its own way. The phone would turn off on its own. And soft brick for maybe 2-3 hours. And then unbrick it self. Meanwhile when u turn it on, you can feel the vibration of the device turn on, but no life on screen. When It does turn of it has the chance to turn on, show the "super powered by ecosystem" and then a blue square would cover the center of the screen. After that ur forced to turn it off again. And turn it back on hoping it won't brick again. When it does turn on normally, there is a chance it would just randomly power off and brick.(even if you are playing a game or browsing the web), I don't know if its hardware problem or software problem. (Btw iam typing this on a note pad so if the phone does brick, I don't have to type again.) It be great if you guys can help me out
First of all, my phone isn't rooted and knox is not triggered.
Today I rebooted my mobile phone because the app adhell wasn't working properly and after that my phone got stuck in the boot loop (samsung letters in the screen).
I've tried wiping the cache and flashing the firmware again with ODIN, didn't work. I can't enter to the safe mode and erase adhell neither. Samsung smart switch doesn't recognise my device so I can't use it.
I run out of ideas, what else can I do to get out of the loop without erasing all the data in the phone?
Thanks in advance.
Same thing here, after update (official from samsung), Mine is stuck in a bootloop too.
Anyone, please help?
---------- Post added at 09:31 PM ---------- Previous post was at 09:29 PM ----------
Same thing here...
If Adhell is the cause, then fixing the bootloop is just as simple as removing it. As for how you go about fixing it, you have a few options.
1) Returning phone to store bought from if still under warranty and getting them to help. They'd most probably wipe it or replace it.
2) Full reset wiping data you don't have backed up
3) Custom recovery that lets you delete the files manually, but will probably trip KNOX
You could always try booting into recovery and see if your PC picks up your phone, then backing up what you can from there. But again, that might not be an option because stock recovery. TWRP lets you access files from your PC, but again trips KNOX.
ProdigyThirteen said:
If Adhell is the cause, then fixing the bootloop is just as simple as removing it. As for how you go about fixing it, you have a few options.
1) Returning phone to store bought from if still under warranty and getting them to help. They'd most probably wipe it or replace it.
2) Full reset wiping data you don't have backed up
3) Custom recovery that lets you delete the files manually, but will probably trip KNOX
You could always try booting into recovery and see if your PC picks up your phone, then backing up what you can from there. But again, that might not be an option because stock recovery. TWRP lets you access files from your PC, but again trips KNOX.
Click to expand...
Click to collapse
The phone is not under warranty and I don't have any data backup. How can I install the TWRP recovery in the situation I am now?
Now it doesn't enter to the recovery mode, and I didn't do anything new.
polema said:
The phone is not under warranty and I don't have any data backup. How can I install the TWRP recovery in the situation I am now?
Click to expand...
Click to collapse
First off, download SkipSoft Toolkit, go through the options it gives you until you're on the model of your phone and Android version. Then if you haven't already installed the drivers, do it. SkipSoft has the ones you need there. SkipSoft also downloads all the files you need to root, to flash TWRP, has a stock recovery if you mess up or want to return to stock for whatever reason after.
Then select the option to flash a custom recovery and root. You don't have to root, it won't do it automatically, that's something you have to flash yourself inside of TWRP if you want to. If you do want to root, look into Magisk. It lets you still use apps that normally don't work on rooted devices (it doesn't trip SafetyNet).
As for flashing the recovery, there's a wall of text that SkipSoft gives you to read which I'd recommend going over to make sure you know what you're doing. If you screw up, 99% of the time there is a fix for it so don't panic.
If all goes well, you should see TWRP loading up when you boot into recovery. Then when you connect your phone to your PC, it should appear as normal and you can copy any files you want to back up. TWRP has a Wipe option that will completely clear all installed apps, all app data, any setting changes and set your phone back to stock without deleting the files you have on it to save you from having to copy them all back again after. I'd also recommend making a complete backup of everything through the option in TWRP at that point for future security, and just in case you want to root.
If you have any more questions, just ask. I don't have an answer for everything, but I'll try my best.
ProdigyThirteen said:
First off, download SkipSoft Toolkit, go through the options it gives you until you're on the model of your phone and Android version. Then if you haven't already installed the drivers, do it. SkipSoft has the ones you need there. SkipSoft also downloads all the files you need to root, to flash TWRP, has a stock recovery if you mess up or want to return to stock for whatever reason after.
Then select the option to flash a custom recovery and root. You don't have to root, it won't do it automatically, that's something you have to flash yourself inside of TWRP if you want to. If you do want to root, look into Magisk. It lets you still use apps that normally don't work on rooted devices (it doesn't trip SafetyNet).
As for flashing the recovery, there's a wall of text that SkipSoft gives you to read which I'd recommend going over to make sure you know what you're doing. If you screw up, 99% of the time there is a fix for it so don't panic.
If all goes well, you should see TWRP loading up when you boot into recovery. Then when you connect your phone to your PC, it should appear as normal and you can copy any files you want to back up. TWRP has a Wipe option that will completely clear all installed apps, all app data, any setting changes and set your phone back to stock without deleting the files you have on it to save you from having to copy them all back again after. I'd also recommend making a complete backup of everything through the option in TWRP at that point for future security, and just in case you want to root.
If you have any more questions, just ask. I don't have an answer for everything, but I'll try my best.
Click to expand...
Click to collapse
Thanks for all the help.
I have android 7 nougat in my phone and it's not among the options, what should I do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
polema said:
Thanks for all the help.
I have android 7 nougat in my phone and it's not among the options, what should I do?
Click to expand...
Click to collapse
Update SkipSoft, recent version is 1.5.6, 7.0 is in that version.
If you can't update for whatever reasons, you can manually download the TWRP files from here and drop those into C:\Unified_Android_Toolkit\recovery\GalaxyS6Edge, then select any version of Android and follow what it says. Just don't flash the root it provides, use Magisk as I said before.
polema said:
Thanks for all the help.
I have android 7 nougat in my phone and it's not among the options, what should I do?
Click to expand...
Click to collapse
You still having trouble with this?
Finally I managed to repair the phone with smart switch, I've lost my photos/videos but the rest was saved in samsung cloud.
polema said:
Finally I managed to repair the phone with smart switch, I've lost my photos/videos but the rest was saved in samsung cloud.
Click to expand...
Click to collapse
Hi, I am having the same problem as you since yesterday afternoon where it's stuck in a boot loop, my notification light was blinking so when I went to check on it the phone was turned off but the light was still blinking, the light only stopped after the battery drained completely. when I tried to turn the phone on after charging it, it's still stuck in a boot loop, only thing I can do is hold the volume down, power, and home button down to enter the "downloading do not turn off target screen." I downloaded smart switch on my laptop last night to see if I can fix my phone through that but it says unsupported device, and when I try emergency software recovery and initialization option when I enter model name and S/N number and click OK the program closes and nothing happens. polema what did you do to fix your device?
abhi821 said:
Hi, I am having the same problem as you since yesterday afternoon where it's stuck in a boot loop, my notification light was blinking so when I went to check on it the phone was turned off but the light was still blinking, the light only stopped after the battery drained completely. when I tried to turn the phone on after charging it, it's still stuck in a boot loop, only thing I can do is hold the volume down, power, and home button down to enter the "downloading do not turn off target screen." I downloaded smart switch on my laptop last night to see if I can fix my phone through that but it says unsupported device, and when I try emergency software recovery and initialization option when I enter model name and S/N number and click OK the program closes and nothing happens. polema what did you do to fix your device?
Click to expand...
Click to collapse
Flash stock firmware through Odin.
Or try boot your phone to recovery mode (up home and Bixby. If it boots to recovery plug to pc and see if smart switch recognises it.
callumbr1 said:
Flash stock firmware through Odin.
Or try boot your phone to recovery mode (up home and Bixby. If it boots to recovery plug to pc and see if smart switch recognises it.
Click to expand...
Click to collapse
I forgot to mention my phone is a samsung galaxy s6 edge, also I tired the recovery mode but it still does the boot loop. Are there clear instructions to flash stock firmware through Odin?
abhi821 said:
I forgot to mention my phone is a samsung galaxy s6 edge, also I tired the recovery mode but it still does the boot loop. Are there clear instructions to flash stock firmware through Odin?
Click to expand...
Click to collapse
What android version is it and what region and model? Tell me these and I'll post the firmware with the steps to flash.
callumbr1 said:
What android version is it and what region and model? Tell me these and I'll post the firmware with the steps to flash.
Click to expand...
Click to collapse
I got my phone through AT&T in USA model is SM-G925AUCU1AOCE and I not sure what android version I have.