Hello Everyone, this is my phone:
gt i9500 (Samsung clone) firmware 4.2.2
processor :armv7 quadcore 1200mhz
ram:467
display 540x960
240 dpi ,my camera is malfunctioning, 12 o 8 mpx??
forget: board wingtech89_we_jb2
display JDQ39.I9500XXUAMDF
HARDWARE: MT6589
KERNEL 3.4.5
addition to the problem of the camera, the system is rigged AnTuTu and you can not 'update, I would like fleshiare with a clean rom basic
thanks
Go to the Needrom site or download the app from playstore....
Search for Bluebo B9500 and you'll find everything you'll need.
Sent from my B9500 using xda app-developers app
Don't forget the thanks button.:thumbup:
was cpando
Coertmans said:
Go to the Needrom site or download the app from playstore....
Search for Bluebo B9500 and you'll find everything you'll need.
Sent from my B9500 using xda app-developers app
Don't forget the thanks button.:thumbup:
Click to expand...
Click to collapse
I tried 3 versions of rom, the phone turns on when the Android logo, turns off after 20 seconds, I have to do?
Did you install the cwm recovery..?
Or did you used the flashtool..?
If you flashed it with recovery u have to do a full wipe...(clean install)
Wipe - date and cache+dalvik and do a factory reset all in CWM recovery
Than flash you' re rom (pre rooted one)
Reboot....
Sent from my B9500 using xda app-developers app
ok..
Coertmans said:
Did you install the cwm recovery..?
Or did you used the flashtool..?
If you flashed it with recovery u have to do a full wipe...(clean install)
Wipe - date and cache+dalvik and do a factory reset all in CWM recovery
Than flash you' re rom (pre rooted one)
Reboot....
Sent from my B9500 using xda app-developers app
Click to expand...
Click to collapse
hello, I installed with flashtool.
I'm no expert.
you can pass a driving, what should I do?
Ok..
First open Flashtool,
Select in options
- force highspeed
- flash with battery mode
Ok now you can load you scatter
(Its somewhere on the middel right of flash tool.
If you have done all of that you can press f9 or press downloadmode.
Take out you're phones battery and connect your phone to the usb.
put in you're battery and wait for it to
Finish... (You'll see an green cirkel with download finisht download (100%)
Now you can safely disconnect you're phone and power it on...
First boot could take a long time to finish... (Sometimes over 5 min.)
If it didn't work maby you could post a photo's of the back (without battery cover)
And maby some of the front for reverence...
Sent from my B9500 using xda app-developers app
ok
ENTERING THE SYSTEM RECOVERY FOR ALL ITEMS THAT SAYS I click, NO CONTROL
I installed the three roms available,
but turn on the contrary, you do not hear the sound,
and does not see the micro sd memory
Try one for the Star N9500 it's almost the same phone..
Try to install the a pre-rooted rom for it....
Sent from my B9500 using xda app-developers app
boo
Bluebo B9500
Bluebo B9500 - old version
Bluebo B9500 - Update 07/08/2013
these are the rom that I put with flashtool: turns off after the logo Android
ok...
I managed to get it started, with a rom for star N9500, you see upside down I have to do?
ok
enzuccio36 said:
I managed to get it started, with a rom for star N9500, you see upside down I have to do?
Click to expand...
Click to collapse
I solved last problem I miss the camera ...
Ok now we know what Brand and model you're phone is...
Problem 1 solved...
Download a other rom for that phone,
Best is to download the stock rom (rooted) and flash that one.
most of the time the stock one has everything working...
Hope this will solve youre last problem...
Greetz Coertmans..
P.s. don't forget the thanks button... :thumbup::thumbup::thumbup:
news
I installed this rom: SGS4 FINAL 4.3 everything works except the camera, and I lost the air gesture and smart controll, someone has solutions?
enzuccio36 said:
I installed this rom: SGS4 FINAL 4.3 everything works except the camera, and I lost the air gesture and smart controll, someone has solutions?
Click to expand...
Click to collapse
I have same phone as pictured in one of the above post.
I think it is bluebo b9500.
but I had tried some roms and I have problems with upside lcd or upside-down digitizer responses.
my phone has 960x540 lcd and 512mb ram with mtk6589. 12 and 2mp cameras.
Coertmans said:
Go to the Needrom site or download the app from playstore....
Search for Bluebo B9500 and you'll find everything you'll need.
Sent from my B9500 using xda app-developers app
Don't forget the thanks button.:thumbup:
Click to expand...
Click to collapse
thanks bro you are very helpful i did as you described and everything is ok now, but i'm missing the clone S4 Samsung logo on startup and the startup and shutdown sound is not like an S4 Clone
do you know where i can get the customization for startup logo, shutdown logo and the sounds also, i wonder where can i get the exact rom for this S4 Clone, instead of the BlueBo version, i think we have to read it from a fresh new phones?
Coertmans said:
Go to the Needrom site or download the app from playstore....
Search for Bluebo B9500 and you'll find everything you'll need.
Sent from my B9500 using xda app-developers app
Don't forget the thanks button.:thumbup:
Click to expand...
Click to collapse
Does it maintain the samsung gui without the crappy chinese apps?:good:
Can I flash the file I downloaded from needrom? I just couldnt do the drivers on usb.
I have root *
I have cwm *
I think our everything is same with the OP.
Can I directly flash it with cwm?
Please can u help me? I need firmware/custom firmware for clone s4.
Model number GT-I9500
Android version-4.2.2
Baseband ver-l9500XXUAMDE
Kernel ver 3.4.5-l9500ZSKJ6-CL679970
Build number-JDQ39.l9500XXUAMDF
Custom build version-circle.20130627.Q.V004
It's Called Superking S4!
512 Ram (But advertised as 1gb)
MTK6589
With Air Gesture but one direction only
2gb rom
1 gb internal
I have this phone..My phone is hard bricked now, anyone please help me , i need firmware of this model..please guyz please help me
rs161208 said:
Please can u help me? I need firmware/custom firmware for clone s4.
Model number GT-I9500
Android version-4.2.2
Baseband ver-l9500XXUAMDE
Kernel ver 3.4.5-l9500ZSKJ6-CL679970
Build number-JDQ39.l9500XXUAMDF
Custom build version-circle.20130627.Q.V004
It's Called Superking S4!
512 Ram (But advertised as 1gb)
MTK6589
With Air Gesture but one direction only
2gb rom
1 gb internal
I have this phone..My phone is hard bricked now, anyone please help me , i need firmware of this model..please guyz please help me
Click to expand...
Click to collapse
is your CWM working?
no...but flash tool is detecting it...can you provide me some backup roms aur any link..
Related
OK guys, here are the basics:
Samsung Galaxy S3 i9300 in Taiwan
Running SuperNexus-I9300-Build5-20121017 Android 4.1.2
Modem GT-I9300
Kernel 3.0.31-CM-g95661c3
TSF Shell running on top
CWM Ver 6+
Rom Manager from CWM
What I am trying to do:
Upgrade to Paranoid android maguro 3.15-28MAR Rom (Android 4.2.2)
What I have done:
-cleared all the cache as recommended via XDA (including DELVIK)
-Run the install of the zip file from internal SD Card (also tried from external)
-tried installing from Rom Manager
-tried repeated installs, one after the other,
-checked to make sure that I had the latest build of CWM
-flashed CWM from Rom Manager
-tried install again
-restored backup and tried install again.
-searched XDA's website for a clue to an answer
-I do have the associated gapps but don't get a chance to install them as I can't install the ROM.
All these steps and hours of reading and I still keep getting the "status 7 error"
Any suggestions would be greatly appreciated!
Billk6969
Maguro isn't the s3.
I think you've downloaded the wrong PA ROM
Sent from my GT-I9300 using xda app-developers app
As above post the link if you think its the correct rom .
jje
mikep99 said:
Maguro isn't the s3.
I think you've downloaded the wrong PA ROM
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
This also helps me,I was having problems trying to fit a Rover v6 in my Robin Reliant, now I understand why
slaphead20 said:
This also helps me,I was having problems trying to fit a Rover v6 in my Robin Reliant, now I understand why
Click to expand...
Click to collapse
Fool buy a dog basket .
jje
mikep99 said:
Maguro isn't the s3.
I think you've downloaded the wrong PA ROM
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OMG!!! Talk about feeling like an idiot...You mean to tell me that you can't put a square peg in a round hole?
Thank you so much. It's funny how we can get so caught up in the details, that we forget to look a the big picture.
Downloaded correct rom and gapps and am now rocking the paranoid 3.0+!!!
Thank you all for helping, this truly is a great group of people!
^^^ good man:thumbup: I like humility
Hey guys I am just wondering is there a twrp recovery for our ace...if not is tyere a flashavlble cwm now? I haven't been here in a while so I am out of the loop
Sent from my GT-S5830i using xda premium
Abel669 said:
Hey guys I am just wondering is there a twrp recovery for our ace...if not is tyere a flashavlble cwm now? I haven't been here in a while so I am out of the loop
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
No, there is no TWRP recovery as for now. And check the FAQ Thread, you'll get everything from there
Rahul4Ace said:
we need one. :good:
Click to expand...
Click to collapse
Yeah we need everything. We need TWRP, OTG, Jelly Bean 4.2, OC at 1.9 GHz, RAM of 2 GB, 5 Inch Screen, NFC
But there's a lot of difference in what we need and what we get, or precisely saying, what we CAN get.
This is not even need. It's just fantasizing
iamareebjamal said:
Yeah we need everything. We need TWRP, OTG, Jelly Bean 4.2, OC at 1.9 GHz, RAM of 2 GB, 5 Inch Screen, NFC
But there's a lot of difference in what we need and what we get, or precisely saying, what we CAN get.
This is not even need. It's just fantasizing
Click to expand...
Click to collapse
No, we don't need a 5 inch screen. am happy with 3.5 XD
But won't a temporary TWRP work like in CWM?
DamnTarget said:
But won't a temporary TWRP work like in CWM?
Click to expand...
Click to collapse
Currently..TWRP is not Available for this device.
You can use CWM or RZR Recovery in Rafeals Kernel...
haytham.kenway said:
Currently..TWRP is not Available for this device.
You can use CWM or RZR Recovery in Rafeals Kernel...
Click to expand...
Click to collapse
what about rzr, any links
Rahul4Ace said:
what about rzr, any links
Click to expand...
Click to collapse
I think it is only available in Rafeal's kernel.
Haaha. Devs from 4pda try to do it, but working only reboot and screen togles
Sent from my GT-S5830i using xda premium
Flashable CMW For S5830i.
Based on Rafael kernel 0821, if there is any BUG, please tell me
Method of installation：
1. Download the "cwm0824.zip" and place in SD card-
2. Download cwm (ClockWorkRec5830i.zip) and place in sd card - ClockWorkRecS5830i.zip
3. Switch off the phone. Press sound up + home and power button together to got to Samsung recovery mode.
4. Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
5. Select "apply update from sdcard" and select the "cwm0824" CMW0824.zip
6. Wait...
7. Enjoy the cwm 5.0.2.6 Perma !
Can Try This In Stock Firmware Or Any Firmware ! Now U Have Perma CMW 5.0.2.6 ! Enjoy ! This Is Flashable CMW ! No Brick !
Hit Thanks Button If I Helped U !
There Is No TWRP For Our Device Currently !
Raphael -> CMW0824.zip ..brick ..BootLoop (can't mound /system)
Hello Friends!!
here are some Roms of SPICE Mi-496
hope you all will like this...
Tested and working Roms:-
1. samsung galaxy s5 look link---> https://drive.google.com/uc?id=0B1RO...xport=download
restore partition
Baidu Cloud 50 Rom -------> https://drive.google.com/uc?id=0B1ROkJ9mtCf_bmZZSUN0Y1o4OTQ&export=download
flash
i root my coolpad 7268 spice mi496 by baidu root.apk
then i install chain fire 3d when i reboot device after installing driver it got software damage and not starting now only spice logo is apearing.
so i want to flash it now with latest v9 firmware
i don't know how to flash pleaze tell me method and software reqife for it
dont worry bro every thing will b ok... frst you have to download some software... 1) ygdp tool. 2) chinese recovery 3) firmware version 9. 4) drivers of your phone (install this) after downloading all these files you have to switch off your phone. after that install ygdp tool and change the date to 1st august 2013 of your system. now you have to click on chinese button to switch to english. this tool will ask a password enter 9527. now take switched off phone and press volume up button and connect to pc via cable. you will see phone will switch to download mode. now in config select 7268 and browse for the cpb file which you will get by extracting recovery.zip. now press ok. it will verify and will say verified. now press start button. after few second it will say 100%. now paste firmware version 9 to your memory card now press both volume keys and power button together. you will see chinese recovery menu. go to second option sd sumthing browse to that zip and install.
joshi milan said:
i root my coolpad 7268 spice mi496 by baidu root.apk
then i install chain fire 3d when i reboot device after installing driver it got software damage and not starting now only spice logo is apearing.
so i want to flash it now with latest v9 firmware
i don't know how to flash pleaze tell me method and software reqife for it
Click to expand...
Click to collapse
Hi,
I have got the solution... Go to my thread and please thanks if it works....
http://forum.xda-developers.com/showthread.php?t=2633278
I m very thnk to u bro thnx buddy thx again fr helpng me
bhavesh_thakur said:
Hello Friends!!
I am very fond of mobile development and customization of stock ROM. Currently I have SPICE COOLPAD 2 Mi-496. Build number SPICE_Mi-496_IND_VER7.0_130625_1024
I wanted to root my device to get superuser permission. For this purpose I searched many times over the internet but never got a solution. Finally I got a solution which I want to share with you guys.
download this apk from attachments.
GUI is in Chinese but dont worry you can root your device by a single click.
just touch the screen and your device will be rooted. Now you can install Superuser from google play.
I hope this information will be helpful for you guys!!:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
:cyclops: thnku vry mch bro bt cn i chnge the language of this sftwre ??
Flashing chinese recovery
Hey bro srkRohan! i m happy as my post helped you. bro there is no option to change the language of baiduroot. but there are others options to get rooted. you have to download these files from this thread http://forum.xda-developers.com/showthread.php?t=2532192
1)Chinese CWM
2)SuperSU.zip
3)Flashing tool
4)Drivers for ADB & USB tethering - Windows 8.1 x86/x64 compatible
flash chinese recovery(recovery.zip)
and after that install SuperSU.zip in recovery mode. to open recovery mode press both volume keys and power button for 10-15 mins. you will see a chinese recovery GUI. go to second option saying SD something. and browse for SuperSu.zip which you have downloaded and kept in external sd card. now you have unlocked a new world. your phone is rooted with english Chainfire superuser. also you can install latest firmware of version 9. and also other roms.
i hope this post will help you bro.
new MIUI 5 ROM
Hey friends This is a MIUI ROM link for MI-496 http://forum.xda-developers.com/showthread.php?p=51349591#post51349591
Gapps
You can download latest Google apps from the xda if you want to customize your own.
Additional Modifications:•
Google apps added, Play store tested and working
•Chinese bloat removed
•External sdcard has been made default
•GPS fixes, Indian Localization
•Latest Viper4Andoid FX added
screenshots
here are some screenshots
Spice latest ROM
Hello Guys!!
Today I am sharing a rom with you which is still not complete but 90% of work has been done. only some apps are missing in it. please download and customize it and reply after successful attempt of any.
coolpad latest Rom
this rom requires three basic things:--
1) gapps
2) working camera
3) file explorer
coolpad latest Rom
uploading the link in few minutes....
coolpad latest Rom
link https://drive.google.com/file/d/0B1ROkJ9mtCf_RndxNWNJNkM5OWs/edit?usp=sharing
Ye yunos rom toh nhi... Kaun sa version hai ye bhavesh
Sent from my coolpad7268 using XDA Premium 4 mobile app
sohanjaryal said:
Ye yunos rom toh nhi... Kaun sa version hai ye bhavesh
Sent from my coolpad7268 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
YAR this was Coolpad7268ROM_V6有情作品.zip jise maine customze kia
Iska original link dena... Kis site se ki hai
Sent from my coolpad7268 using XDA Premium 4 mobile app
Hey guys do you want android l keyboard please go to this thread for method "coolpad 7268" and for screen shots "cwm recovery for spice mi 515"go to this thread
http://pan.baidu.com/s/1bn1q7nT
Can u plzzz. find scatter file for spice mi 496
This is a completely 100% stock rom built from the P5200XXUAMK8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5200 3G, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download link:
100% stock
Rooted/Deodexed
Thanks a bunch, this will save me somewhere down the road !
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
serendipityguy said:
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
Click to expand...
Click to collapse
I think it's just a region difference, will work just fine on your tab though, there's no difference in the internals
Just changed hosts to mediafire due to reports of problems with mega
just added a deodexed / rooted build. No other changes have been made to the second build
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Lump800 said:
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Click to expand...
Click to collapse
Flash stock Rom via Odin only this fix this Problem ... Have the same Problem
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
And after that I can flash directly the file from above?! To get rot and deodexed?
Sent from my GT-I9305 using XDA Premium 4 mobile app
Yes ... Don't forget to flash twrp ... Odin flash the stock recovery with the Firmware
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Max4000 said:
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Click to expand...
Click to collapse
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Restl3ss said:
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Click to expand...
Click to collapse
hi guys
just a question
deodexed version is flashable by recovery or by odin?
thanks in advance
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
saba7o0o said:
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
Click to expand...
Click to collapse
check the recovery that you are using...
where is the md5 file i downloaded the stock.zip and cant find it
Newby question
Hello, is this the correct download for unrooting my tab 3?
I have a cwg mod installed and cannot get my firmware updated by samsung software
it wont update from the tab also.
greetings wolfgang
It seems i cant download the file from the link here rapid gator net/ file /72cb51702f19de71ac6ce8dbdcfcc611
semms like it is to big to be downloaded in the free time slot...
bootloop after flashing , boots reaches galaxy tab logo then reboots again
Same here! bootloop after flashing.
TWRP 2.8.7.1
I got my new arya z2 from Amazon yesterday....
It runs on Kitkat 4.4.2....I think it's boot loader is locked..
I thought towelroot would work but it didnt root my phone...
How will I root this phone.... It's Chinese made.. . With MTK6582 processor...
How will I flash cwm in this phone?
Please help me... :crying:
I also can't root my Arya Z2....plz help me xda
I tried all the quick roots like vroot , one click root, root genius etc..
Now what will i do now??
Its runs on MTK6582 processor..as @Rifan007 said...
Specs from site:
- 5inch Capacitive touchscreen,1080*720pixels
- CPU: MTK6582 Quad Core,ARMv7 Processor rev3 1.3GHz
- 1GB RAM + 4GB ROM
- Dual Camera: Back Camera 8.0MP and Front camera 2.0MP,with flashlight
- Android 4.4.2 Kitkat OS
- Dual SIM Card Standby(both sims 3g)
arifsiyad said:
I tried all the quick roots like vroot , one click root, root genius etc..
Now what will i do now??
Its runs on MTK6582 processor..as @Rifan007 said...
Specs from site:
- 5inch Capacitive touchscreen,1080*720pixels
- CPU: MTK6582 Quad Core,ARMv7 Processor rev3 1.3GHz
- 1GB RAM + 4GB ROM
- Dual Camera: Back Camera 8.0MP and Front camera 2.0MP,with flashlight
- Android 4.4.2 Kitkat OS
- Dual SIM Card Standby(both sims 3g)
Click to expand...
Click to collapse
Hey.... Arifsiyad will someone help us..?
You can try out this method to root your device :
http://forum.xda-developers.com/showthread.php?p=48586181#post48586181
Sent from my XT1022 using Tapatalk
rooting aryaZ2
Friends,
Go to Arya Z2 page in facebook. The procedure for rooting is available there. Njoy!!
Salora Arya Z2 Root and Custom Recovery
The device was rooted by me way back.
Download the files from the link below and follow the mentioned procedure.
https://dl.dropboxusercontent.com/u/90004190/Arya%20Z2%20CWM%20and%20Rooting.rar
Procedure:
1. Download and install drivers from the download files
If not working try these too
http://ge.tt/16RpEaG1/v/0?c
http://ge.tt/7nbYNYy/v/0
Problem in installation?? Go
http://forum.xda-developers.com/showthread.php?t=2206421
2. Download and copy/move UPDATE-SuperSU-v2.02 to your memory card.
3. Download recovery and place it in pc.
4. Open Flash tools and load MT6582_Android_scatter.txt in it.
5. Click on 'recovery' in sp flash tools and select the downloaded Recovery.
6. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
7. Insert battery and press volume up+power on, then press volume up to select recovery.
8. Select install from sd card and press the power button to go forward, select UPDATE-SuperSU-v2.02.zip and say yes to flash.
9. Reboot, Done.
FLASH TOOLS
http://www.needrom.com/wp-content/uploads/2014/06/SP_Flash_Tool_v5.1352.01.rar
---------- Post added at 08:26 AM ---------- Previous post was at 08:25 AM ----------
This method is working and verified by users on Facebook.
arya z2
manishmony said:
Friends,
Go to Arya Z2 page in facebook. The procedure for rooting is available there. Njoy!!
Click to expand...
Click to collapse
bro give me link of arya z2 fb page
?????//
sanjunain said:
bro give me link of arya z2 fb page
?????//
Click to expand...
Click to collapse
I deleted the Facebook page as I was to busy with my other office schedule. However I have updated the same details above which was on the Facebook page.
Custom Roms?
sayyedmohseen said:
I deleted the Facebook page as I was to busy with my other office schedule. However I have updated the same details above which was on the Facebook page.
Click to expand...
Click to collapse
Hi Sayyed,
Do you have custom roms for Arya?
Or any similar phones from which roms can be ported to ARYA..:angel:
Some one tell how to root arya z2 .. anyone? ?
Sent from my Ktouch A15 using Tapatalk 2
immy28 said:
Some one tell how to root arya z2 .. anyone? ?
Sent from my Ktouch A15 using Tapatalk 2
Click to expand...
Click to collapse
Salora Arya Z2 Root and Custom Recovery
The device was rooted by me way back.
Download the files from the link below and follow the mentioned procedure.
https://dl.dropboxusercontent.com/u/... Rooting.rar
Procedure:
1. Download and install drivers from the download files
If not working try these too
http://ge.tt/16RpEaG1/v/0?c
http://ge.tt/7nbYNYy/v/0
Problem in installation?? Go
http://forum.xda-developers.com/show....php?t=2206421
2. Download and copy/move UPDATE-SuperSU-v2.02 to your memory card.
3. Download recovery and place it in pc.
4. Open Flash tools and load MT6582_Android_scatter.txt in it.
5. Click on 'recovery' in sp flash tools and select the downloaded Recovery.
6. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
7. Insert battery and press volume up+power on, then press volume up to select recovery.
8. Select install from sd card and press the power button to go forward, select UPDATE-SuperSU-v2.02.zip and say yes to flash.
9. Reboot, Done.
FLASH TOOLS
http://www.needrom.com/wp-content/up...v5.1352.01.rar
Rooted and searching for ROM now
Thanks a lot for the post. Got the rooting done for my Salora- Arya Z2. This post was the only place to help in this case. A Request : pls suggest me to upgrade or install a new ROM in the device coz of divided partition in phone memory and I n trying to use a trading software which is not installing in the phone whereas have used it in my frenz moto g2 lollipop version. Pls advice or guide
I m just a beginner for rooting n all other tweaks...
Thanks once again...
sandesh4u said:
Thanks a lot for the post. Got the rooting done for my Salora- Arya Z2. This post was the only place to help in this case. A Request : pls suggest me to upgrade or install a new ROM in the device coz of divided partition in phone memory and I n trying to use a trading software which is not installing in the phone whereas have used it in my frenz moto g2 lollipop version. Pls advice or guide
I m just a beginner for rooting n all other tweaks...
Thanks once again...
Click to expand...
Click to collapse
Let me look on that! I sold my arya z2 3months ago... now using lenovo a7000a!