Hi everyone,
So i'm new to firmwares and stuff.
So my phone recently stuffed up by for whatever reason restarting itself and freezing on the 'samsung gt-i9300t' screen.
So i went on to download mode and tried using the firmware provided by sammobile and used it with Odin but it didnt work. here is what the message says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.m d5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Some notes-
*recovery mode does not work, it just restarts the phone
*the phone is from the telstra company in australia
*i havent installed any roms before so it's been running on android
spaghettisauce said:
Hi everyone,
So i'm new to firmwares and stuff.
So my phone recently stuffed up by for whatever reason restarting itself and freezing on the 'samsung gt-i9300t' screen.
So i went on to download mode and tried using the firmware provided by sammobile and used it with Odin but it didnt work. here is what the message says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.m d5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Some notes-
*recovery mode does not work, it just restarts the phone
*the phone is from the telstra company in australia
*i havent installed any roms before so it's been running on android
Click to expand...
Click to collapse
tried flashing it again and it said
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
spaghettisauce said:
tried flashing it again and it said
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
does usb debugging is enabled check that
then use a different odin
sangalaxy said:
does usb debugging is enabled check that
then use a different odin
Click to expand...
Click to collapse
um i downloaded the drivers for my phone but im not sure how to check if debugging is on
should i use an older version of odin then?
sangalaxy said:
does usb debugging is enabled check that
then use a different odin
Click to expand...
Click to collapse
i tried what you said and this message shows up
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> tz.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
spaghettisauce said:
i tried what you said and this message shows up
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> tz.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
debugging is on settings-applications-development check that
and try an older version of odin1.85 will be better
try and post
sangalaxy said:
debugging is on settings-applications-development check that
and try an older version of odin1.85 will be better
try and post
Click to expand...
Click to collapse
i cant get to the debug option my phone is frozen in boot screen. odin 1.85 shows-
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
spaghettisauce said:
i cant get to the debug option my phone is frozen in boot screen. odin 1.85 shows-
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
Click to expand...
Click to collapse
do you have kies running
If yes disable that
and be sure that you have the correct usb drivers or kies installed
and you can also try without battery
take out the battery and connect to pc then go into download mode
sangalaxy said:
do you have kies running
If yes disable that
and be sure that you have the correct usb drivers or kies installed
and you can also try without battery
take out the battery and connect to pc then go into download mode
Click to expand...
Click to collapse
i dont have kies and ive got the correct drivers
spaghettisauce said:
i dont have kies and ive got the correct drivers
Click to expand...
Click to collapse
the better is uninstall drivers and install kies and try connecting if you computer recognizes just fine the go with as above said without battery
sangalaxy said:
the better is uninstall drivers and install kies and try connecting if you computer recognizes just fine the go with as above said without battery
Click to expand...
Click to collapse
my phone doesnt turn on without battery
spaghettisauce said:
my phone doesnt turn on without battery
Click to expand...
Click to collapse
go into download mode after connecting to pc it will work without battery
Related
Main issue in most android phone-battery.... i'm sick hearing and talking abt it. try this apps....this is my main battery saving measure. "2x Battery - Battery Saver" free version is good enough for majority user...i got the paid version for more customization option and support to Sam.
other than that, usual battery saving measure that u need to find out are, live wallpaper, apps refresh/update (facebook,twitter etc), animation setting, backup setting, screen brightness etc................
Odin update for LG1 ROM.
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLG1_I9300OLBBLF1_I9300DXLF3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLG1_I9300OLBBLF1_I9300DXLF3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> system.img
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Completed..
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
loveshakeh said:
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
Click to expand...
Click to collapse
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
it gives this error in both roms :/
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
i again tried it gives cache error again
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
Your phone boots?
testadeferro said:
Your phone boots?
Click to expand...
Click to collapse
when i press power button on it say firmware encountered an error bla bla stuff
when i press power + volume up + menu button nothing happens
when i press power + volume down+ menu button odin recovery mode appears with andriod little green robot downloading do not turn off target
above that its written product name : gt i9100 , custom binary download 28 counts and current binary = custom
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
testadeferro said:
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed the steps from the thread link u given didnt worked but the custom binary changes from custom to samsung
Hi, my english is not the best but i'll try.
Last night i take my phone and he dont boot, frezzed in Samsung GT-I9300 logo. I enter the CWMod and got some lines saying can't reach /cache/____. I tried to wipe and nothing. Then tried to install stock firmware and got an error on odin.
Download Mode Info
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: COSTUM
without pit file
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300VFGGNB1_I9300BUUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
with pit file
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300VFGGNB1_I9300BUUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried 3 USB Cables and all computer USB ports.
Now i can't enter CWMod or boot, only download mode. If need more info to help i give.
Your emmc chip is damaged, new motherboard required.
I tried reverting from Cyanogenmod to official firmware. Whilst flashing my dog jumped on my I9105P and disconnected my phone. Now when i connect it to a charger or USB port it says "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again". Tried flashing with Odin but i get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNG1_I9105PVVTBNG1_I9105PXXUBNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also can't go to download mode. It says "Low battery, can't download". I left it to charge all night.
Help?
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
husamba said:
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
Click to expand...
Click to collapse
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
DejVidKo said:
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
Click to expand...
Click to collapse
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
husamba said:
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If you have another version of Odin,try Odin v3.04
DejVidKo said:
If you have another version of Odin,try Odin v3.04
Click to expand...
Click to collapse
No wayyy. I tried it too. And I am getting same error. There are more than one rom in sammobile. May I download the wrong rom from sammobile.. :S
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)