Hello. This is bothering me. I've tried searching but seems nothing helps.
Here's the scenario: (It was my 2nd attempt to flash)
I was running the touchwiz (but my phone was basically, rooted).. This paste few days, it started to hang and freeze every once in a while. Then i noticed that freezing became frequent. So i decided to flash ROM.
I used this AOKP Milestone2 because they say it is stable http://aokp.co/devices/i9300# and G-apps4.2 - Everything runs smoothly and after the reboot, the homescreen get stucked on the "welcome screen" I wasn't able to hit the "start" button. it's freezing. After a while.. It automatically shuts down.
I tried to re-flash it.
Sometimes, i was able to pass through and open playstore, then it hangs again?! I have to force power-off it to work then it happens again.
NOW..
I restored my Nand back-up (Touchwiz) hoping it'll work at least. but then after reaching the interface.. It was again freezed. T.T
I cannot use my phone now.
I was planning to do the BrickedBug checked but i cannot because i cannot access my phone.
Please, any help or enlightment or same experiences?
Thank you very much in advance! ^_^
No idea what you have flashed its not from XDA suggest you ask that site what's wrong .
But first boot to download mode what does product code say if nothing then you need a new motherboard .
In that respect read the SDS sudden death syndrome sticky and Phone Freezing sticky .
JJEgan said:
No idea what you have flashed its not from XDA suggest you ask that site what's wrong .
But first boot to download mode what does product code say if nothing then you need a new motherboard .
In that respect read the SDS sudden death syndrome sticky and Phone Freezing sticky .
Click to expand...
Click to collapse
I've checked my phone through eMMC BrickBug Check and it luckily has insane chip.
eMMC chip
Type: VTU00M
Date: 08/2012
CID:15010056545530304df104c2143a8fdb
Fwrev: 0xf1
I flashed LiquidSmooth 4.3 + Gapps 4.3
Flashed TWRP to change my CWM 6.0 Custom recovery
Everything seemed okay than before. It freezes only once yet.
I read in here: http://forum.xda-developers.com/showthread.php?t=2091045 and its says
Recap
..if you checked you have VTU00M 0xf1 with EMMC check , you need to ensure:
If unrooted (never rooted / modded), you are on one of the "Stock" ROMs listed above
If rooted, you have one of the "Custom Kernels" OR "Custom ROMs including kernel" OR rooted "stock" with original kernel AND one of the "Custom recoveries" from the lists below
Click to expand...
Click to collapse
I was still wondering if what i did helped the sds problem. Im alaso a little bit confused about Bootloader. Does liquidSmooth 4.3 pass the Custom ROMs including Kernel?
Im sorry,still confused.
Click to expand...
Click to collapse
perseidionix said:
I've checked my phone through eMMC BrickBug Check and it luckily has insane chip.
eMMC chip
Type: VTU00M
Date: 08/2012
CID:15010056545530304df104c2143a8fdb
Fwrev: 0xf1
I flashed LiquidSmooth 4.3 + Gapps 4.3
Flashed TWRP to change my CWM 6.0 Custom recovery
Everything seemed okay than before. It freezes only once yet.
I read in here: http://forum.xda-developers.com/showthread.php?t=2091045 and its says
Recap
I was still wondering if what i did helped the sds problem. Im alaso a little bit confused about Bootloader. Does liquidSmooth 4.3 pass the Custom ROMs including Kernel?
Im sorry,still confused.
Click to expand...
Click to collapse
answer the above question buddy. what does it say under product name in download mode?
Click to expand...
Click to collapse
answer the above question buddy. what does it say under product name in download mode?
Click to expand...
Click to collapse
I was always on recovery mode when flashing. Haven't tried download mode yet.
Sorry. I realized I didn't understand the question just now.
It says:
Product name: GT-i9300
Current binary Dl: 1
System status: Custom
System status: Custom
Sent from my GT-I9300 using xda app-developers app
Just want to clarify
JJEgan said:
No idea what you have flashed its not from XDA suggest you ask that site what's wrong .
But first boot to download mode what does product code say if nothing then you need a new motherboard .
In that respect read the SDS sudden death syndrome sticky and Phone Freezing sticky .
Click to expand...
Click to collapse
I just really want to fix the freezing and prevent SDS before it become terminal.
This is what it says in Download Mode:
Product name: GT-i9300
Current binary Dl: 1
System status: Custom
System status: Custom
I've read the stickies and it says it need
A bootloader with fixes**
A Recovery with a fixed kernel
A Fixed kernel to run Android
Click to expand...
Click to collapse
1. I flashed LiquidSmooth 4.3 v2.10 http://forum.xda-developers.com/showthread.php?t=2264782 + Gapps
2. From CWM 6.0.x.x i flashed TWRP (it improves a little, and now hanging and auto-shutting down again). This is the phone's info now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Now it still freezes hangs and auto-shutdown)
What I will do now is:
3. Flash a kernel compatible with my ROM base on http://forum.xda-developers.com/showthread.php?t=2091045and
]My question is:
1. I am doubtful if the ROM and kernel i have has this SDS fix (I've read the forum on LSmooth and no clear answer) so i decide to flash a Kernel
2. Can I flash a firmware (to fix/prevent the SDS) using Odin? Is it safe or will just ruin my phone more?
3. As what i've read, it says if possible stay away from using download mode? I was just wondering about this bootloader, will I be safe if I just do not flash (if im right) this bootloader w/ fixes? (Since I do not actually use download mode?
I dont intend to be spoonfed, I was just confused. I dont want to brick the phone that'll cause much damage instead of just freezing or SDS.
Thanks
Related
Hello. I wanted to unlock my phone so I flashed my phone Using Odin and using the insecure kernel. After that the screen quality basically went down. I flashed the galaxy s2 back to the factory mode then back to the old 3 network mode that was in. The screen still looks super bad. Please, can anyone help me with this?
When I open up my phone status. The kernel is: [email protected] #2
I'm getting a feeling that insecure kernel is not removed is it?
arthurleonov said:
Hello. I wanted to unlock my phone so I flashed my phone Using Odin and using the insecure kernel. After that the screen quality basically went down. I flashed the galaxy s2 back to the factory mode then back to the old 3 network mode that was in. The screen still looks super bad. Please, can anyone help me with this?
When I open up my phone status. The kernel is: [email protected] #2
I'm getting a feeling that insecure kernel is not removed is it?
Click to expand...
Click to collapse
Simply Flashing the phone through ODIN does not unlocks your phone. To get you phone to proper state, I suggest :
1.If you still rooted, format cache/system/data from CWM recovery
2. Flash the Carrier branded firmware from Intratech thread http://forum.xda-developers.com/showthread.php?t=1113928
3. Root the phone using by flashing matching CF-Root Kernel from Chainfire thread http://forum.xda-developers.com/showthread.php?t=1103399
4. Take a Nandroid back from CWM recovery in case something goes wrong
5. Install the app galaxy unlock from the market .
6. Use the app to unlock your phone.
Hope this helps!
ksantoshh said:
Simply Flashing the phone through ODIN does not unlocks your phone. To get you phone to proper state, I suggest :
1.If you still rooted, format cache/system/data from CWM recovery
2. Flash the Carrier branded firmware from Intratech thread http://forum.xda-developers.com/showthread.php?t=1113928
3. Root the phone using by flashing matching CF-Root Kernel from Chainfire thread http://forum.xda-developers.com/showthread.php?t=1103399
4. Take a Nandroid back from CWM recovery in case something goes wrong
5. Install the app galaxy unlock from the market .
6. Use the app to unlock your phone.
Hope this helps!
Click to expand...
Click to collapse
I tried flashing with the original stock kernel XWKE1:http://www.multiupload.com/15RY5CHHW9
Firmware info: PDA: XWKE1 Phone: NEKD5 CSC:H3GKD4
but the screen quality is still not vivid, theres less colours and the quality is poor. Can anywone tell me where the problem lies? I know i installed the wrong kernel but why installing the stock kernel does not fix the problem
arthurleonov said:
I tried flashing with the original stock kernel XWKE1:http://www.multiupload.com/15RY5CHHW9
Firmware info: PDA: XWKE1 Phone: NEKD5 CSC:H3GKD4
but the screen quality is still not vivid, theres less colours and the quality is poor. Can anywone tell me where the problem lies? I know i installed the wrong kernel but why installing the stock kernel does not fix the problem
Click to expand...
Click to collapse
Did you format and reset as mentioned in the steps ?
ksantoshh said:
Did you format and reset as mentioned in the steps ?
Click to expand...
Click to collapse
I did everything and it is still not working. And the screen looks bad. Honestly, I just want to return the screen to its normal state. I dont know what to do. Heres how it looks like.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As well as a mass color reduction. I can sense also a yellowish tint
Flash stock rom from the stock roms thread .
Check your display settings etc .
reset custom rom counter return for repair .
jje
JJEgan said:
Flash stock rom from the stock roms thread .
Check your display settings etc .
reset custom rom counter return for repair .
jje
Click to expand...
Click to collapse
I think I have a stock rom as you can see from the kernel picture above or is it something different?
The display settings does not work. I tried playing with them.
Maybe its just in your mind, or try fo find exactly the same firm as your old one.
arthurleonov said:
Hello. I wanted to unlock my phone so I flashed my phone Using Odin and using the insecure kernel. After that the screen quality basically went down. I flashed the galaxy s2 back to the factory mode then back to the old 3 network mode that was in. The screen still looks super bad. Please, can anyone help me with this?
When I open up my phone status. The kernel is: [email protected] #2
I'm getting a feeling that insecure kernel is not removed is it?
Click to expand...
Click to collapse
I AM FACING EXACT SAME PROBLEM AFTER I ROOTED THE PHONE USING DOOMLORD WAY AND THE SCREEN HAS A ORANGISH TINT HOW DID YOU FIX IT???
Fixxed with new kernel and full factory restore!
Sent from my GT-I9100 using XDA
Which kernel you used and how?
Which Kernel you used and how you did it? I am going through the same problem. I have tried alot of things but nothing worked. I hope you can help me.
kernel contains the display drivers which were corrupt flash a stock Rom and it fixes !!
Sent from my GT-I9100 Powered by sense 4.0 pre-alpha by don2012!
ok i saw all the threads but no help ...
symptoms... no recovery (just battery logo), download mode is working,
when i flash siyah it gets bootloop... stuck at samsung logo...
odin is flashing normaly without error...
these are the screens i get
1. recovery (battery logo)
2. entering download mode
3. download mode
https://www.dropbox.com/sh/lb2vi1y7h833q50/T1c9GSy8kx
gt-i9100
ssn i9100gsmh
fcc id a3lgti9100
which rom should i download and with which version of odin to flash
everything id downloaded ok and odin flashes without problem ...?
Flash philz touch or cf kernel then siyah
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel
Ok i will try asap... Will report back
still nothing...
sabirwest said:
still nothing...
Click to expand...
Click to collapse
Go to sammobile.com, sign up, dl a stock rom, flash through Odin, root.
THE biggest issue is that i cant get to recovery, i allready downloaded stock rom and tried. right now i am downloading i9100xwlss version to try because my friend has thatone on his phone working... i just have no starting point to begin with. allready got bricked phone and i dont know on which carrier it was, whic android version it had. etc.. will try this and then i give up. lots of time i have lost trying.
sabirwest said:
THE biggest issue is that i cant get to recovery, i allready downloaded stock rom and tried. right now i am downloading i9100xwlss version to try because my friend has thatone on his phone working... i just have no starting point to begin with. allready got bricked phone and i dont know on which carrier it was, whic android version it had. etc.. will try this and then i give up. lots of time i have lost trying.
Click to expand...
Click to collapse
You put phone into download mode and flash through Odin. There are many guides on here for directions
Here's one guide. Read the full first page
http://forum.xda-developers.com/showthread.php?p=21659039
yeah i know, many guides i have done, walked through, but nothing helps. odin flashes without problem. phone restarts and still no recovery with bootloop... flashed this and that.. and still same issues.
Flash JB leak firmware via odin (comes as 3 parts - Pda, phone and csc). Then see if it boots. If it doesn't, try to enter recovery and factort reset.
Report back what happens.
"To err is human, to forgive is divine"
Sent from my SGS II
I've seen a couple of these cases happening lately, my bet is on the bootloader, eventhough I don't encourage people to try flashing it. Or, as always, OP is holding something back.
Neo, I'm not familiar with the ROM being downloaded from a non-stable internet connection and I know you get them from an internet cafe. Now, is it possible that Odin would allow (flash) a corrupted ROM?
Sent from the little guy
sabirwest said:
yeah i know, many guides i have done, walked through, but nothing helps. odin flashes without problem. phone restarts and still no recovery with bootloop... flashed this and that.. and still same issues.
Click to expand...
Click to collapse
try to find the stock rom that comes in 4 files, CSC, PDA, modem + bootloader
sabirwest said:
yeah i know, many guides i have done, walked through, but nothing helps. odin flashes without problem. phone restarts and still no recovery with bootloop... flashed this and that.. and still same issues.
Click to expand...
Click to collapse
I literally did this yesterday. After you flash stock you have to boot into 3e (stock recovery) and wipe data. This will stop the bootloop and you can carry on with rooting if that's what you want.
It's better to wipe dalvik, you need CWM for that, that's why it's always suggested to flash a custom ROM when on a bootloop.
Sent from the little guy
jeah i know but whatever i flash i still have no recovery...
ok now its official. phone memory is problem, i went to service today and they told me that when i flash with odin the values that i flash dont stay in the memory, on the next boot
those values get clear, memory bug of some kind, he said that he can manual and direct approach to the motherboard and write recovery directly but he cant say if it will always
work like it is suppose to.
Hum....I think you're getting conned, as the matter of fact, he must be reading this right now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy
Just as i thought
Sent from my GT-I9300 using xda app-developers app
Check other threads, I'm dealing with 3 guys with this same issue.
Sent from the little guy
officialy the phone went bye bye !!!! Cheers for being with me in those hard times !!!
Pit file flash?
Sent from the little guy
Hello!
I soft bricked my Samsung Galaxy s3 GT-I9300
I don't know how...
I tried flashing cutom roms, stock roms and kernels...nothing works
ODIN says: NAND write start!! Then it fails everytime.
So i'm looking forward to send it back to the service centre as it is supposedly still on warranty. To benefit from the warranty, the custom binary download should be "No".
My phone can still go into download mode, recovery mode is inaccessible.
In download mode it sayS:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
Is there any way I can reset the custom binary download to "No" ?
PS: According to some videos on YouTube, USB jigs only get the phone in download mode, it does NOT reset the custom binary download counter.
Please help me, thank you.
Gowtamee said:
Hello!
I soft bricked my Samsung Galaxy s3 GT-I9300
I don't know how...
I tried flashing cutom roms, stock roms and kernels...nothing works
ODIN says: NAND write start!! Then it fails everytime.
So i'm looking forward to send it back to the service centre as it is supposedly still on warranty. To benefit from the warranty, the custom binary download should be "No".
My phone can still go into download mode, recovery mode is inaccessible.
In download mode it sayS:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
Is there any way I can reset the custom binary download to "No" ?
PS: According to some videos on YouTube, USB jigs only get the phone in download mode, it does NOT reset the custom binary download counter.
Please help me, thank you.
Click to expand...
Click to collapse
your in the wrong forum this is for i9305
Blackwolf10 said:
your in the wrong forum this is for i9305
Click to expand...
Click to collapse
Nope, you are mistaken buddy.
wangdaning said:
Nope, you are mistaken buddy.
Click to expand...
Click to collapse
he was when i posted that
the Mod have moved the post to here
---------- Post added at 04:19 AM ---------- Previous post was at 04:14 AM ----------
Gowtamee said:
Hello!
I soft bricked my Samsung Galaxy s3 GT-I9300
I don't know how...
I tried flashing cutom roms, stock roms and kernels...nothing works
ODIN says: NAND write start!! Then it fails everytime.
So i'm looking forward to send it back to the service centre as it is supposedly still on warranty. To benefit from the warranty, the custom binary download should be "No".
My phone can still go into download mode, recovery mode is inaccessible.
In download mode it sayS:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
Is there any way I can reset the custom binary download to "No" ?
PS: According to some videos on YouTube, USB jigs only get the phone in download mode, it does NOT reset the custom binary download counter.
Please help me, thank you.
Click to expand...
Click to collapse
now as for your problem i think you damaged the motherboard in some way that's why you can't flash anything
hi
try this link
http://forum.xda-developers.com/showthread.php?p=41593409#post41593409
did you check all the usb ports on yoir cpu? all of 'em giving same result??
sent from my GT-I9300 running Mac OS
sriram231092 said:
did you check all the usb ports on yoir cpu? all of 'em giving same result??
sent from my GT-I9300 running Mac OS
Click to expand...
Click to collapse
By cpu you mean computer? Not central processing unit, which cpu typically stands for?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
By cpu you mean computer? Not central processing unit, which cpu typically stands for?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
yeah yeah cpu of his PC.
sriram231092 said:
yeah yeah cpu of his PC.
Click to expand...
Click to collapse
Theres no USB ports on the CPU of his PC...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My intel i7 has all kinds of usb sockets on it.
I don't even need a motherboard.
CPU is the processor. Computer, pc, these are what have ports. Your phone has a cpu also, is that what you mean?
It is a small point but at the same time big and important as I know many here are translating to get information.
To the OP:
1) Download the CF root for your device. Place it in the PDA section of odin and flash. Read here http://forum.xda-developers.com/showthread.php?t=1695238
2) Enter recovery (volume up + home + power) and wipe things
3) Download and install a CWM compatable .zip rom, I can recommend wanam's roms http://wanamlite.com/category/devices/rom-galaxy-s3/ But I would not start with a leak!
4) When and if you get running update your recovery!
Have been in your situation. I have even lost recovery, old tv style look when I go there. It may be recoverable.
Most custom roms flash through recovery, so if you are trying to flash with odin it will fail.
Try this and let us know how it goes. Also, make it clear how it fails, ie what file went to what program to do what.
Again, most custom roms and kernels cannot be flashed with Odin, that might be the reason you are soft bricked.
Laptop/Computer ports.
Brother, First of all completely uninstall samsung kies and samsung folders from your computer, then reinstall kies. After reinstallation is completed just close kies and start ODIN and flash your cell phone with help of download mode
I faced the same problem and this helped me out, and yes.. your device is not bricked
All the best :good:
My s3 drive me crazy. I have been using it for 1 year, recently I could not awake it from sleep.
It somehow reboot or just stuck with black screen without any response no matter I pressed any buttons. It happens every time when it go sleep,
I manage to keep my phone wake up by ticking "stay awake" and plug my phone with USB cable for now. But obviously, when I am out this doesn't work....
I have tried to flash Samsung stock Rom 4.0.4 and any other custom Roms, but the symptom is the same, dead while sleeping.
It also sometime freeze in samsung log occasionally, and then reboot itself.
THIS IS REALLY DRIVE ME CRAZY!! PLEASE HELP ME !!!
have you tried Factory data reset?
Your phone is too lazy.
Sent from my GT-I9100 using xda app-developers app
Definitely did....reset factory data
Every time when I reset factory data and reboot it always freeze on samsung logo first time, and after reboot by itself, it is OK.
ashraf sharif said:
have you tried Factory data reset?
Click to expand...
Click to collapse
Flash stock rom via Odin next step. Still a problem you need service centre . jje
are you running stock rom and stock recovery as well as stock kernel? did you use odin or kies ? if you use custom roms and recoveries and kernels you may have problems. you mention flashing 4.0.4 , did you try 4.1.2? you can find the latest odin flashable official firmwares at sammobile. going back to stock is probably a better option than taking the custom route. especially if the problem is hardware related . also if you need to get the phone serviced under warranty. good luck
zeroarst said:
My s3 drive me crazy. I have been using it for 1 year, recently I could not awake it from sleep.
It somehow reboot or just stuck with black screen without any response no matter I pressed any buttons. It happens every time when it go sleep,
I manage to keep my phone wake up by ticking "stay awake" and plug my phone with USB cable for now. But obviously, when I am out this doesn't work....
I have tried to flash Samsung stock Rom 4.0.4 and any other custom Roms, but the symptom is the same, dead while sleeping.
It also sometime freeze in samsung log occasionally, and then reboot itself.
THIS IS REALLY DRIVE ME CRAZY!! PLEASE HELP ME !!!
Click to expand...
Click to collapse
yes. as JJE already mentioned, you try flashing the latest JB firmware of your region. no ICS firmwares!
ashraf sharif said:
are you running stock rom and stock recovery as well as stock kernel? did you use odin or kies ? if you use custom roms and recoveries and kernels you may have problems. you mention flashing 4.0.4 , did you try 4.1.2? you can find the latest odin flashable official firmwares at sammobile. going back to stock is probably a better option than taking the custom route. especially if the problem is hardware related . also if you need to get the phone serviced under warranty. good luck
Click to expand...
Click to collapse
What did u mean "stock recovery as well as stock kernel", anything else I have to do after flashing the stock ROM?
Thanks for you reply.
zeroarst said:
What did u mean "stock recovery as well as stock kernel", anything else I have to do after flashing the stock ROM?
Thanks for you reply.
Click to expand...
Click to collapse
he meant whether you've flashed any custom kernel . even if you have , if you full firmware flash everything will be back to stock.
chris_marsh said:
he meant whether you've flashed any custom kernel . even if you have , if you full firmware flash everything will be back to stock.
Click to expand...
Click to collapse
Yes, and it needs to be done. Just go through the normal full flash for warranty process (guides for this in General) and factory reset. If it still happens, you've ruled out software /data and can only be hardware.
zeroarst said:
My s3 drive me crazy. I have been using it for 1 year, recently I could not awake it from sleep.
It somehow reboot or just stuck with black screen without any response no matter I pressed any buttons. It happens every time when it go sleep,
I manage to keep my phone wake up by ticking "stay awake" and plug my phone with USB cable for now. But obviously, when I am out this doesn't work....
I have tried to flash Samsung stock Rom 4.0.4 and any other custom Roms, but the symptom is the same, dead while sleeping.
It also sometime freeze in samsung log occasionally, and then reboot itself.
THIS IS REALLY DRIVE ME CRAZY!! PLEASE HELP ME !!!
Click to expand...
Click to collapse
Try this app in play store and post what's mentionned, I've read a lot of things regarding these symptoms, hope it is not what it looks to be
Hope it's not too late
leech4 said:
Try this app in play store and post what's mentionned, I've read a lot of things regarding these symptoms, hope it is not what it looks to be
Hope it's not too late
Click to expand...
Click to collapse
well, after running the check, I got "Congratulations. Test Passed. 694s. 15758000128 bytes (14.7GB) 21.7MB/s"
But I can hot be happy.
zeroarst said:
well, after running the check, I got "Congratulations. Test Passed. 694s. 15758000128 bytes (14.7GB) 21.7MB/s"
But I can hot be happy.
Click to expand...
Click to collapse
Is it saying "NO. sane chip" under Sudden death ?
leech4 said:
Is it saying "NO. sane chip" under Sudden death ?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So...does it mean chip was broken?
zeroarst said:
View attachment 2057308
So...does it mean chip was broken?
Click to expand...
Click to collapse
Unfortunately, your ship is INSANE and there is a big chance that your phone is dying slowly. It is something similar to sudden death
You should go here an apply fixes, hoping it is not too late for you, just read carefully what to do
Don't waste your time and apply fixes ASAP
Good luck
I want to revert an ATT i717 rooted, with CWM ver.6, custom KK rom back to ATT stock rom (I did try KIES but it didn't recognize phone as I understand due to rom being custom.) I don't have a back up of the original stock rom. All download links I have come across are dead. Need help to locate working DL links.
2-Wifey has the same exact phone rooted with CWM ver. 6 with stock JB rom. I am wondering if I take a back up of that and flash it to my phone if that will be ok or if that's a chance for a brick?
jayinc11 said:
I want to revert an ATT i717 rooted, with CWM ver.6, custom KK rom back to ATT stock rom (I did try KIES but it didn't recognize phone as I understand due to rom being custom.) I don't have a back up of the original stock rom. All download links I have come across are dead. Need help to locate working DL links.
2-Wifey has the same exact phone rooted with CWM ver. 6 with stock JB rom. I am wondering if I take a back up of that and flash it to my phone if that will be ok or if that's a chance for a brick?
Click to expand...
Click to collapse
You have posted in the development forum. Try Q&A.
Also if you can't find Odin file here, try to search google. You may find an active somewhere else. Other than that, you can wait. if I ever get off work I could probably scrounge up a copy to my dropbox.
Let me know if you find. Sorry, I won't have time until tomorrow afternoon . In middle of a work marathon on 2 jobs.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
jayinc11 said:
I want to revert an ATT i717 rooted, with CWM ver.6, custom KK rom back to ATT stock rom (I did try KIES but it didn't recognize phone as I understand due to rom being custom.) I don't have a back up of the original stock rom. All download links I have come across are dead. Need help to locate working DL links.
2-Wifey has the same exact phone rooted with CWM ver. 6 with stock JB rom. I am wondering if I take a back up of that and flash it to my phone if that will be ok or if that's a chance for a brick?
Click to expand...
Click to collapse
here's a link to stock jb:
https://drive.google.com/file/d/0B8CfFE5fSiMQS1NuZVZmUnRNYVU/view?usp=sharing
it includes the rom, cwm recovery, supersu, odin, kernel, and modem.
odin the rom first, then the recovery.
copy supersu to the phone and install thru cwm.
you'll need to update binaries.
also included is the current cwm recovery i use to install kit kat roms.
beenkenobee said:
here's a link to stock jb:
https://drive.google.com/file/d/0B8CfFE5fSiMQS1NuZVZmUnRNYVU/view?usp=sharing
it includes the rom, cwm recovery, supersu, odin, kernel, and modem.
odin the rom first, then the recovery.
copy supersu to the phone and install thru cwm.
you'll need to update binaries.
also included is the current cwm recovery i use to install kit kat roms.
Click to expand...
Click to collapse
Hey thanx! Just a quick question - what is to update binaries and how do I go about that?
captemo said:
You have posted in the development forum. Try Q&A.
Also if you can't find Odin file here, try to search google. You may find an active somewhere else. Other than that, you can wait. if I ever get off work I could probably scrounge up a copy to my dropbox.
Let me know if you find. Sorry, I won't have time until tomorrow afternoon . In middle of a work marathon on 2 jobs.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
Hey thanx - I am following the d/l link from above. Unless otherwise think it will work out.
jayinc11 said:
Hey thanx! Just a quick question - what is to update binaries and how do I go about that?
Click to expand...
Click to collapse
once you get done installing and the phone booted up,
start supersu and follow the instructions.
beenkenobee said:
once you get done installing and the phone booted up,
start supersu and follow the instructions.
Click to expand...
Click to collapse
Finally d/l at work, odined the rom and encountered "Firmware upgrade encountered an issue, Please select recovery mode in kies and try again"
Phone cannot enter recov. mode nor download mode. I tried kies and 2 issues came up 1 my phone has no serial number, I entered wife's S/No. (same exact phone, both made in Korea) but the second problem is that kies wants me to turn off phone, and enter d/l mode which isn't coming up.
I tried my JIG thingy but same screen comes up.
How do I fix this?
ATTN: MOD
If need be please move thread as appropriate.
jayinc11 said:
Finally d/l at work, odined the rom and encountered "Firmware upgrade encountered an issue, Please select recovery mode in kies and try again"
Phone cannot enter recov. mode nor download mode. I tried kies and 2 issues came up 1 my phone has no serial number, I entered wife's S/No. (same exact phone, both made in Korea) but the second problem is that kies wants me to turn off phone, and enter d/l mode which isn't coming up.
I tried my JIG thingy but same screen comes up.
How do I fix this?
ATTN: MOD
If need be please move thread as appropriate.
Click to expand...
Click to collapse
i've restored using this many many times and never ran into a problem.
did you odin only the firmware tar?
possibly a bad d/l.
See below
beenkenobee said:
i've restored using this many many times and never ran into a problem.
did you odin only the firmware tar?
possibly a bad d/l.
Click to expand...
Click to collapse
Could be, really don't know for sure. Note has this screen. Anything I attempt it's resulting in the following screen below. DL mode, hit volume up and bam, same screen. Recovery, same deal, try to boot normally = same. Even a jig gets the DL mode first screen and then bam! Is there any way to fix this or Is the phone at the point of jtag repair, or worse a brick?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jayinc11 said:
Could be, really don't know for sure. Note has this screen. Anything I attempt it's resulting in the following screen below. DL mode, hit volume up and bam, same screen. Recovery, same deal, try to boot normally = same. Even a jig gets the DL mode first screen and then bam! Is there any way to fix this or Is the phone at the point of jtag repair, or worse a brick?
Click to expand...
Click to collapse
uninstall kies.
reinstall the usb driver if needed and try again.