Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
phaw16 said:
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
hnkotnis said:
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello can you provide me a link where i can download cherry mobile fuze stock firmware thanks you very much
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
hey dude .did your phone fix??
a114 user mt6582
hi dude did u resolve that ..now i got that problem man ..the thing which happend to u turned to me just formatted completley and now suffering...searching solutions for two days....jus tell me if u find the solution dude ... email to [email protected]
we have a same problem.
I fixed my phone (FUZE) ... .
just flash the phone in Firmware with "SEC_RO" file.
Fix IMEI, at least for MT6589 Gigabyte GSmart Aku A1 (if *#06# show Invalid IMEI):
Call *#*#3646633#*#* Engineer mode, Connectivity, CDS Info, Radio Info,
Phone 1: AT+EGMR=1,7,"myIMEI" <send>
Phone 2: AT+EGMR=1,10,"myIMEI2" <send>
Hello @phaw16, @nandhu.crab19 : Can you resolve that problem?
I have the same here my phone is Blu Dash 5.5 D470u with mt6582 processor.
The meta mode is failed to connect. Drivers are ok.
help............
i had my imei lost
and was able to have it recovered via mtkdroid tools..
baseband is also present...
but still no reception....
on engineering mode,,i tried the at commands but still i get error cant do on this user build...
suggestions?
zeusseuz said:
help............
i had my imei lost
and was able to have it recovered via mtkdroid tools..
baseband is also present...
but still no reception....
on engineering mode,,i tried the at commands but still i get error cant do on this user build...
suggestions?
Click to expand...
Click to collapse
try to put this code into Android Emulator (download from Google Play)
suecho ‘AT +EGMR=1,7,”put your 1 SIM IMEI number here”‘> /dev/pttycmd1echo ‘AT +EGMR=1,10,”put your 2 IMEI number here”‘> /dev/pttycmd1
Hope can fix your problem
anything else possible???
guys i need your help to fix back my Kata T-mini 4.4.2 [MTK6582]. i just did a flash recovery using the recovery tool app. after the flash it reboot automatically but then no signal shown when i check it using the MTK Tool showing "null IMEI andi unknown baseband". when i open the wifi cant connect to any network. hoping someone cud help me here. i tried already all the methods on how to recovery the imei but still not working. and my phablet cant be read in SP Flash tools.
Sir I downgrade my Lenovo a7000 to marshmallow to lollipop with sp flash tool with original stock rom and by mistake I select format and install in so flash tool and software install successfully but my imei number , serial never is deleted so I root my phone and re write my imei number again but when I format or reset my phone my imei number deleted again ..
I tried many method for fixing my issue permanently but all fail like imei number writer tool , my droid , meta tool but it's all not working even I install all driver too but still is does not show mobile ..
I think I facing low network issue too after my imei number problem.
Please give solution..
Guys, I need help becau wr se I'm desperate. I accidentally used the format + ALL in the SP flash tool and now my IMEI is 0000000 ..., I already tried several methods to try to solve (malimeta, SN writer, adb terminal etc.) but none solved my problem. I came here to ask you that it has the same version (xt1754) if you can give me your backup of imei or nvram.bin, please help me, I need this smartphone