Hello! Everyone.
am in desperate need of help. A white line across the screen of my DS5 suddenly appeared. Sometimes it's not there but more often than not it's there. Especially when I'm using a reading app or it is in the lock screen. Plus, when I reboot it, while rebooting, the white line is visible.
really don't know what's wrong with the screen. I read a lot of the problems the DS5 has and all the problems that learned seems not applicable in my case.
attached some of the pictures. hope you can see the white lines clearly. Hope to get some answers on what it is and what are the steps or options to do in order to fix the problem. It is not that a big issue on other people, however, I'm not comfortable about it and find it really annoying. It would be great if you guys can point me the right direction.
Thanks you so much!
xonic211 said:
Hello! Everyone.
am in desperate need of help. A white line across the screen of my DS5 suddenly appeared. Sometimes it's not there but more often than not it's there. Especially when I'm using a reading app or it is in the lock screen. Plus, when I reboot it, while rebooting, the white line is visible.
really don't know what's wrong with the screen. I read a lot of the problems the DS5 has and all the problems that learned seems not applicable in my case.
attached some of the pictures. hope you can see the white lines clearly. Hope to get some answers on what it is and what are the steps or options to do in order to fix the problem. It is not that a big issue on other people, however, I'm not comfortable about it and find it really annoying. It would be great if you guys can point me the right direction.
Thanks you so much!
Click to expand...
Click to collapse
Try screen calibration..
peddi_th said:
Try screen calibration..
Click to expand...
Click to collapse
So your suggesting that it is not a dead pixel? or the hardware (screen) can be fixed? Thanks!
peddi_th said:
Try screen calibration..
Click to expand...
Click to collapse
I just did. The white line is still there.
There are two possible causes of this:
1. A fault in the ribbon cable.
2. A fault in the LCD itself.
A fault in the ribbon cable could be related to the connection to the motherboard or a break in one of the lines. LCD displays have tiny transistors at the edges of the screen which control the on/off state of the pixels. Sometimes they get stuck. If this is the cause of your problem, then it appears that yours is getting stuck in the "on" state, resulting in the white line.
Your options are few: purchase a used Streak with a good display and bad motherboard to swap parts with, purchase a working device and put yours up on ebay, or purchase a replacement LCD display and glass.
Related
Hi to everyone in this forum. I've recently received as a present a new toshiba folio 100, but, since I'm experiencing an annoying menu button flashing, I've thought of it as a software problem so I upgraded the folio using the foliomod1.3c and applied the rotate patch and also the 1.3c fix patch. The menu still flash with no apparent logic. I've tried to kill all applications running and it's still there. It seem to come up and down at random. I ask to all in this forum: do you believe it's a hardware issue or is a software issue? Because if it's a hardware issue I'm going to try to have a new folio from toshiba. I'm overall very pleased with the work that Dexter made to make the folio an usable machine but this flashing is driving me crazy. I use the folio basically as a portable scientific pdf reader so I need to concentrate on what I read and this flashing is really annoying. I would like very much to thank you all in this forum in advance for all the suggestion/help you could provide.
use my "foliobuttons" app
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I have a request that serve All those who suffer MENU crazy button .
Is it possible to prepare application you can setting ON/OFF the MENU button
Most of the time useless button.
sometimes button jump after 10 minutes, sometimes after an hour
Usually I fix the problem by changing the settings with FolioButtons 1.1.
If you could add to FolioButtons on/off operation for menu Buttons was the best.
Hi teknoraver,
Can you add enabled/disabled menu button in foliobuttons application ?
flashing on...
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I am pretty desperate about this issue, because none of the methods seem to help...
Right now the buttons work opposite- Menu button flashes mad and none of the other 3 responds...dont know how it happened
Just a thought- while the folio is booting up the menu button ALREADY flashes! I have zero understanding in there but isn't it a process that loads / starts early in the line?
I appreciate everyone's effort trying to solve this bug as it makes this handy tool a useless pile of crap.
I was wondering how many folio users are suffering of this crazy buttons madness.
Mine was crazy from the very beginning; I sent it back for repair and toshiba only did a firmware restore... Nothing changed at all!
It makes my folio almost unusable!
bye bye crazy buttons
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
I think it's a hardware issue and even a build quality issue.
If i hold my folio at the side of the buttons, i get the flashing buttons problem (even the foliobuttons app will not help), if i hold it at the other side, i've got no problems at all.
Do you have an animated background? Because I saw that some people had this issue with an animated background...
Hi Mshr73, nice first post indeed
Could you post some pictures of what you did?
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
seems to get better...
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
vietnamibalzsam said:
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
Click to expand...
Click to collapse
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
I just tested without thickness under the screen, with foliomod 1.4 and after a few hours I again the problem of crazy buttons.
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
Well, I just finished dismantling e reassembling my Folio. Following your hint, I cut a piece of paper and put it between the audio connector and the back of the screen (yes, it was metal vs metal). I'll see whether it's gonna work or not. Crossing fingers for now.
Not that I'm so confident in leaving a piece of paper stuck right where the DC input is .
BTW, did you try with a smaller thickness? Even if this is the problem, I'm wondering whether a piece of paper would be enough or not.
thyself can someone. post pictures of before and after details?
we will be much appreciated
i didn't have the crazy buttons issue this far in 2 weeks, just my home butten needs to be pressed harder. I'm pretty sure it's hardware related, i read often that users experience it when changing from an warm room to a colder one, or in regions where its verry humid(some circuit closes maybe...). so Mshr73 is on the right way as far as i can tell.
Dexter's 1.4
^Sbk79^ said:
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
Click to expand...
Click to collapse
Really sorry mate, I hope it will solved this for others too...
Anyhow, it is so disturbing, that I was already considering to send the tablet back to Toshiba...
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Mshr73 said:
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Click to expand...
Click to collapse
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
^Sbk79^ said:
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
Click to expand...
Click to collapse
Well ... with a piece of paper the problem Come back.
I handed a piece of cardboard and the problem disappears.
I think that to raise the screen to solve them but I'm still not 100% sure.
Hi everyone!, I'm having this really odd issue with my S2. I've only had it about a week now and this could have been happening all along though I didn't notice it.
Basically If the screen is off and I hit the power button is has this really slight flicker as the screen comes on. It's almost like a single line down the screen right before the wallpaper appears. It's also right-justified on the screen and always in the same spot.
Has anyone else had this issue? It can be reproduced by simply hitting the power button to shut the screen off then hitting it again to turn it on.
Thanks!
Edit: Also the screen doesn't always fade on. 3/5 times it will just "instant-on" where I'll hit the power button and it will instantly show the lock screen tile instead of "fading" into it. Does this happen to anyone else or does it ALWAYS fade in?
I'm probably just being paranoid but I'd rather replace the phone quickly to avoid actually sending it to manufacturer.
Thanks again!
You should take a video of it so we can see if it is normal. I don't see what you describe, and not sure the phone is supposed to "fade in" to the lock screen. Mine is always instant on.
I once flashed to Litening ROM and it had that flicker (lightning style) as a feature I guess, is it the same problem OP stated?
Regards.
Saw it once two days ago, vertically on the extreme left of the screen. Haven't seen it since, but it was very rapid - blink-and-you'll-miss-it job. Can't say it worries me. On Revolution FWIW.
B3311 said:
Saw it once two days ago, vertically on the extreme left of the screen. Haven't seen it since, but it was very rapid - blink-and-you'll-miss-it job. Can't say it worries me. On Revolution FWIW.
Click to expand...
Click to collapse
sorry I can't take a video since this is the only device that I own that is capable of taking video.
anyway, yeah - it's really quick. And it's vertically down the screen. I kind of assumed that it was the backlight turning on but I'm pretty certain that happens on the sides right?
Right now it's 10:00 and this issue happens right where the "1" is on the clock at the top of the screen. So starting from that 1 all the way to the bottom.
Again it's REALLY fast - but it's noticeable, I'd have no problem showing it to someone in front of me. It just looks like a single line about the same width as the "1" as well. It almost seems like the one tiny line is showing before the rest of the screen, like if the screen were a "loading process" that line would be the first thing to appear before the rest gets backlit.
Not sure if it matters but it's the model I9100M from Virgin, just incase they are made differently somehow.
This phone has no backlight. The LED's are all individually lit.
Ryne said:
sorry I can't take a video since this is the only device that I own that is capable of taking video.
anyway, yeah - it's really quick. And it's vertically down the screen. I kind of assumed that it was the backlight turning on but I'm pretty certain that happens on the sides right?
Right now it's 10:00 and this issue happens right where the "1" is on the clock at the top of the screen. So starting from that 1 all the way to the bottom.
Again it's REALLY fast - but it's noticeable, I'd have no problem showing it to someone in front of me. It just looks like a single line about the same width as the "1" as well. It almost seems like the one tiny line is showing before the rest of the screen, like if the screen were a "loading process" that line would be the first thing to appear before the rest gets backlit.
Not sure if it matters but it's the model I9100M from Virgin, just incase they are made differently somehow.
Click to expand...
Click to collapse
Hmm, not the same problem as me - certainly nothing to do with the time here - it was in the afternoon when it happened with me, and my lockscreen clock's in 12 hour format. Clock's also at the bottom of my screen.
Been trying to reproduce it, and can't.
B3311 said:
Hmm, not the same problem as me - certainly nothing to do with the time here - it was in the afternoon when it happened with me, and my lockscreen clock's in 12 hour format. Clock's also at the bottom of my screen.
Been trying to reproduce it, and can't.
Click to expand...
Click to collapse
No no, I wasn't saying that the clock had anything to do with it, I was just trying to describe where the line appears on screen. I was also talking about the clock that appears at the very top, not the one on the lock screen. If I just continually tap the power button on and off I can see the "line" appear every time exactly in that spot.
It's pretty noticeable, unless you have the phone away from you - so if you don't see it then it probably isn't happening.
Does anyone think I should return this and get another? I don't really want to run into issues later and have to send to manufacturer. Is this problem big enough that I could get it replaced without issue?
Thank's for the replies!
Sorry, misunderstood. Definitely not my problem, I have no clock in the status bar.
If it happens every time, I'd probably return it if I was you - could be the precursor of something more serious.
Hi again, Thanks for the replies. I realized today that the issue is really only noticeable if you're in a dark room. Even in a semi-lit room it's almost unnoticeable which is probably why I hadnt seen it thus far.
If anyone wouldn't mind flicking the lights off and taking a look I'd appreciate it. If not I'll just return it.
thanks again forum!
I experience it too (at least I think we are talking about the same thing)..it's like it's stuttering and lagging after being in standby. So the first time it renders the lockscreen, the first few frames seem to be rendered at a different pace. If you turn the screen on after a good break, it'll likely do it, but after a few times in a row it instantly shows the screen.
Perhaps it relates to how big the wallpaper for the lockscreen is. I'm not sure, but I've had some huge 2mb pictures set as wallpapers for the lockscreen, and afterwards I think I decided to select a smaller image. I don't know if it was just a placebo effect, but anyways..it still does it with my current picture. I don't really care. You could try a different lockscreen from android market and see if it helps, but I think every SII suffers from this.
I have this exact issue too and it really annoys me! I also bought the phone from Virgin if that is relevant. It's a white streak on the left of the screen for me and only happens every so often. So what's the prognosis? A software fault? Hopefully fixed in a subsequent firmware update? Or a hardware fault worth repairing?
Hope someone can help me with this as it is a bit of a strange 1.
I recently replaced the digitizer screen on my X10i because the one that was on there was smashed up good.
Everything went together ok and it all switched on ok but for some reason only half of the screen will work(the bottom half). exactly half way through the screen/digitizer when it is vertical, it stops working. The top half does not work. The digitizer and everything else is in perfect condition so I am very confused as to what it could be.
I have replaced 100's of screen in the past and have never come across this problem.
Is it possible it could be a software issue? Does the software need to be re-calibrated to suit the screen? sounds a bit odd to me but ya never know.
Any help would be great.
thanks
Nobody can help me with this??
picklepete said:
I have replaced 100's of screen in the past and have never come across this problem.
Click to expand...
Click to collapse
Considering the above, last thing to try is to factory reset the phone. If that doesn't fix it, its a hardware issue.
My Atrix's screen has become unresponsive in a vertical column (if the phone is in portrait mode) that lines up about with the W, E, and S keys. Restarting fixed the problem for maybe 20 seconds or so after the phone became usable, but doesn't seem to have made a difference after about the third time or so. I also removed the battery and held down the power button for ~45 seconds and then put everything back together, which also seemed to have helped for a minute or less before the stripe became unresponsive again. I also restored to yesterday's backup a couple different times (CM 7.2 stable), which also temporarily helped.
So after a brief search, it seems that the digitizer may be the issue. Is there any way to tell for sure? At first it seemed like a software problem, but it could also just be the digitizer acting erratically because it's going out, so I'm not really sure, and I'd rather not attempt a repair that may not be necessary.
ErrorCode680 said:
My Atrix's screen has become unresponsive in a vertical column (if the phone is in portrait mode) that lines up about with the W, E, and S keys. Restarting fixed the problem for maybe 20 seconds or so after the phone became usable, but doesn't seem to have made a difference after about the third time or so. I also removed the battery and held down the power button for ~45 seconds and then put everything back together, which also seemed to have helped for a minute or less before the stripe became unresponsive again. I also restored to yesterday's backup a couple different times (CM 7.2 stable), which also temporarily helped.
So after a brief search, it seems that the digitizer may be the issue. Is there any way to tell for sure? At first it seemed like a software problem, but it could also just be the digitizer acting erratically because it's going out, so I'm not really sure, and I'd rather not attempt a repair that may not be necessary.
Click to expand...
Click to collapse
there are some screen tester apps on Play which you could use to see if, in fact, your digitizer is a problem.
barry_ said:
there are some screen tester apps on Play which you could use to see if, in fact, your digitizer is a problem.
Click to expand...
Click to collapse
Do you have any specific recommendations? I downloaded the touch test app from here (http://www.freewarelovers.com/android/app/touch-test) to see how much of the screen was misbehaving and discovered that it was a perfect stripe the whole way down, but because I'm not terribly knowledgeable about troubleshooting phone hardware, I don't know if that's telling me it's the digitizer or something else. I attached a screenshot that shows where the stripe is.
ErrorCode680 said:
Do you have any specific recommendations? I downloaded the touch test app from here (http://www.freewarelovers.com/android/app/touch-test) to see how much of the screen was misbehaving and discovered that it was a perfect stripe the whole way down, but because I'm not terribly knowledgeable about troubleshooting phone hardware, I don't know if that's telling me it's the digitizer or something else. I attached a screenshot that shows where the stripe is.
Click to expand...
Click to collapse
#
From what I've seen on here it does look like your digitizer is at fault. I have never had to change mine but there are plenty of posters on here who have and you can look at their experiences to assist you. Also, here's a video I found so you can see what you'll have to do. Good Luck!
http://www.youtube.com/watch?v=grqz-3LdIEk
barry_ said:
#
From what I've seen on here it does look like your digitizer is at fault. I have never had to change mine but there are plenty of posters on here who have and you can look at their experiences to assist you. Also, here's a video I found so you can see what you'll have to do. Good Luck!
http://www.youtube.com/watch?v=grqz-3LdIEk
Click to expand...
Click to collapse
That's unfortunate, but at least I know that's what's wrong. Thanks for your help!
So it looks like a small part of the top of my screen is dead, already tried everything and no luck, The draw line test shows about a 10% of the screen not working. I think this might be a hardware problem, but not sure.
If its the hardware, is it possible to only replace the Digitizer glass, without replacing the LCD screen?
Where can I buy the part (hopefully Original, I read that third party replacements are usually disappointing, because of quality.)? I tried searching in ebay and amazon and was only able to find for the HTC one X not the plus version.
Is it too hard to replace or i'm better saving for a new phone?
Do you mean the area where the status bar is? My HOX+ also doesn't recognize touches there. It happened suddenly 5 months ago when I was playing games . However, I used to it and it is not a big problem, I will give it to repair when I get on vacation .
I already made some researches on the internet and it is not an uncommon problem for touch screens. Yes, it is the digitizer's fault.
/\/\ said:
Do you mean the area where the status bar is? My HOX+ also doesn't recognize touches there. It happened suddenly 5 months ago when I was playing games . However, I used to it and it is not a big problem, I will give it to repair when I get on vacation .
I already made some researches on the internet and it is not an uncommon problem for touch screens. Yes, it is the digitizer's fault.
Click to expand...
Click to collapse
Exactly the same problem, upper part of the screen (all notification bar). I have an OCD and this tiny things bug me a lot. I guess now I need to find a digitizer to replace it, the problem is that on ebay and other sites there are not HOX+ available, all are for the HOX.
Is there any difference between HOX and HOX+ digitizers? I thought both got the same screen.
I'm not an expert so I won't fix it on my own, better send it back to service .
Btw. I've read one time that you can put a piece of paper between the bezel and grill to clean some mess up which could get inside the phone. I was wondered that I was able to slip the paper there, but it didn't work .
Arcano30 said:
So it looks like a small part of the top of my screen is dead, already tried everything and no luck, The draw line test shows about a 10% of the screen not working. I think this might be a hardware problem, but not sure.
If its the hardware, is it possible to only replace the Digitizer glass, without replacing the LCD screen?
Where can I buy the part (hopefully Original, I read that third party replacements are usually disappointing, because of quality.)? I tried searching in ebay and amazon and was only able to find for the HTC one X not the plus version.
Is it too hard to replace or i'm better saving for a new phone?
Click to expand...
Click to collapse
Hi you will find your parts here they sell OEM parts. (http://www.etradesupply.com/htc.html)
Goodluck!
Dont forget to hit the thanks button
Optimus said:
Hi you will find your parts here they sell OEM parts.
Goodluck!
Dont forget to hit the thanks button
Click to expand...
Click to collapse
Anyone tryed to replace screen with digitizer? it helps?
Screen replacement
edenlt said:
Anyone tryed to replace screen with digitizer? it helps?
Click to expand...
Click to collapse
Hi goto youtube and see a video how to replace..
Optimus said:
Hi goto youtube and see a video how to replace..
Click to expand...
Click to collapse
Hi, i know how to replace it, my question was if i replace screen dead zone will dispier?
edenlt said:
Hi, i know how to replace it, my question was if i replace screen dead zone will dispier?
Click to expand...
Click to collapse
yes it will work, but you can't only change the digitizer, it's too hard glued together. I broke my LCD connector while replacing the screen although
I was really careful, so it's not as easy as everyone says.
Thx, i will keep that in mind.