Was done flashing PA android 4.3 on my Droid Razr xt910, somehow removed recovery and was stuck at boot screen, tried RSDLite but unable to flash any stock firmware, since their version is lower than 4.3. Any help would be deeply appreciated. Thank You
What error do you get on RSDLite.?
Also,where did you flash PA.?
On a virtual slot or stock slot.?
DROID RAZR with Tapatalk 4
neo.ank said:
What error do you get on RSDLite.?
Also,where did you flash PA.?
On a virtual slot or stock slot.?
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
"Fastboot Flash Fail 6/18 flash cdt.bin"
I flashed it on slot 1 via BMM, not sure whether it was stock slot or virtual slot.
Any way by which I can flash downgraded firmware?
Thank You
Any help please...
If u are on official jelly bean, u only can flash jelly bean firmware via rsd
Search for 4.1.2 rsd file for ur region
The Wipe!
°It's all about the Wipe°
Related
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
adaimespechip said:
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
Click to expand...
Click to collapse
Rds Lite with the sbf files from here:
http://forum.xda-developers.com/showthread.php?t=1747800
If you whant there is an update for tht version with shoul improove battery life and the radio
http://forum.xda-developers.com/showthread.php?t=1755764
The instruction to isntall the second update are in the first post
I forgot, if you install from rds lite maybe you need to wipe data/cache to make it work. So if you don't want to do it (but i suggest you to do it and make a backup with titanium, so the system will be clean) you have to update from the ota files
Thanks for the reply - Will give this a go when I get home later on!
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
adaimespechip said:
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
Click to expand...
Click to collapse
You have to unzip it, then with rds lite you have to select the xml file that is inside the sbf files
Managed it- upgraded to rsd 5.7 and it picked it straight up
Sent from my XT910 using xda app-developers app
Motorola xt910 Stuck in fastboot mode
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Dário_Remane said:
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Click to expand...
Click to collapse
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
sd_shadow said:
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
Click to expand...
Click to collapse
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Dário_Remane said:
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Click to expand...
Click to collapse
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
welder73 said:
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
Click to expand...
Click to collapse
Thanks mate
I will check there.
Hi, I own a droid razr xt912. I had it rooted with safestrap installed, and I tried to flash cm10.1.2 on the stock rom slot and now it won't boot. I was wondering if anyone knew how to fix this from the stock recovery. Thanks for all your help
bigbroncomiddlelb said:
Hi, I own a droid razr xt912. I had it rooted with safestrap installed, and I tried to flash cm10.1.2 on the stock rom slot and now it won't boot. I was wondering if anyone knew how to fix this from the stock recovery. Thanks for all your help
Click to expand...
Click to collapse
You'll need to use RSDLite to reflash your stock ROM.
Hi everyone! I'm new to this Moto Razr XT910, a korean version one. I have a few questions to ask:
-Is this the device that has an official support by CM? the code named umts_spyder builds? I'm just confused by the other variants ://
-Since this is a korean version with AT&T on it, can I change this to a sim-free (international version)? If so, can you link me some useful guides out there? I've searched for a couple of hours but I never found a good guide for noobies containing on how-to flashing and unlocking bt
I'm an experienced user on flashing this on that and compiling this and that but hope you could understand my situation as if this is a new phone to me Thanks alot! Just an urgent matter.
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! The only stuff that I'm worrying about is the incompatibilities between flashing an international version ROM to a region specified device which is a Korean version. After some deep searches, thank goodness I found this post on a thread being discussed about converting a region specified device into an international one. Anyway here it is:
Semseddin said:
I can't provide you in details since there're are guides for it but briefly you'd have to delete cid with fastboot or bmm but make a backup of it before deletion. You can flash all XT910 firmwares with fastboot just don't forget to delete the cdt.bin line from the RSD LITE XML files that you'd flash. This way cdt.bin partition on your device will not be upgraded to 5 or 7 and stay version 4 which is ICS.
Better create a nandroid backup of your stock rom with bmm recovery and provide necessary files from your device to find stock fastboot of XT910S ICS to firmware-team ?
Click to expand...
Click to collapse
Do you know what is RSD lite XML file and cdt.bin? is these two included on the ROM you'll flash? Anyway, once I've upgraded to ICS, can I freely flash any JB to KK based ROMs? Sorry for bothering with all of my dumbness
EDIT
Nevermind, I just knew RSD lite
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
JovieBrett said:
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
Click to expand...
Click to collapse
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
neo.ank said:
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you for the response. So it means, I will update the device via OTA update first to get the stock JB 4.1.2 then after that, I can now be able to flash custom ROMs whatever I want?
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
neo.ank said:
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you, btw do you know how to backup CID?
JovieBrett said:
Thank you, btw do you know how to backup CID?
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
WOW thank you so much! I've made a backup now ^_^ Will give you thanks later cause I've ran out of thank mehehe
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
Anyway do you know how to fix and what is the error behind this while Im flashing via RSD, it says something like "ebr failed"
Hi devs,
I had KitKat from here: (http://forum.xda-developers.com/showthread.php?t=2535920) installed in stock slot using Safestrap 3.71. Unfortunately I accidentally uninstalled the recovery from Safestrap and now the phone won't start up. Flashing from stock recovery fails. What are my options experts? How can I revive my phone? Kindly link me to resources and guide me through this. I'm lost.
Thanks & Regards,
Sreyan
Nobody on this one?? :crying:
Please help!
bugnotch said:
Nobody on this one?? :crying:
Please help!
Click to expand...
Click to collapse
Find the correct firmware that you need for your phone and flash it with RSD lite
Draxin said:
Find the correct firmware that you need for your phone and flash it with RSD lite
Click to expand...
Click to collapse
Is it possible to flash back to ICS from 4.4 over the stock slot? Do I need to flash using Fastboot or SBF? Does it have to be stock, 'coz I'm not sure if I'll even find a fastboot for a 4.4 stock.
Could you detail a bit on exactly which version of android should I flash with? That'd be of great help..
Thanks.
bugnotch said:
Is it possible to flash back to ICS from 4.4 over the stock slot? Do I need to flash using Fastboot or SBF? Does it have to be stock, 'coz I'm not sure if I'll even find a fastboot for a 4.4 stock.
Could you detail a bit on exactly which version of android should I flash with? That'd be of great help..
Thanks.
Click to expand...
Click to collapse
No, you can't go back to ICS. Your firmware flash will be official OEM Motorola firmware, so it will be Jelly Bean and why RSD lite is required. You will need the correct firmware for your region or carrier, or it won't complete the flash. read/watch tutorials first if you haven't used RSD before. Your 4.4 was a custom ROM. So there aren't any firmware flashes for it. After you have flashed with RSD and the firmware you will be bonestock, unrooted JB. From there root again, reinstall your recovery etc. etc.
Hit thanks if I helped.
Draxin said:
No, you can't go back to ICS. Your firmware flash will be official OEM Motorola firmware, so it will be Jelly Bean and why RSD lite is required. You will need the correct firmware for your region or carrier, or it won't complete the flash. read/watch tutorials first if you haven't used RSD before. Your 4.4 was a custom ROM. So there aren't any firmware flashes for it. After you have flashed with RSD and the firmware you will be bonestock, unrooted JB. From there root again, reinstall your recovery etc. etc.
Hit thanks if I helped.
Click to expand...
Click to collapse
Hi Draxin,
Thank you for the suggestion. About the OEM firmware, mine's an Asia Retail version of Razr. We never had an official firmware beyond ICS. So what do you suggest? Will deleting the CID and then flashing with a JB EU work?
bugnotch said:
Hi Draxin,
Thank you for the suggestion. About the OEM firmware, mine's an Asia Retail version of Razr. We never had an official firmware beyond ICS. So what do you suggest? Will deleting the CID and then flashing with a JB EU work?
Click to expand...
Click to collapse
If you didn't delete the CID to swap firmwares before to get CM11, I wouldn't start now. Most xt910 firmwares now are JB, and once you are on the motorola JB kernel you can't go back to ICS, which was why I said that. If you weren't on a official JB before then that doesn't apply to you.
I would flash the official Firmware for your device, and yes you will have to put your device into apfastboot for RSD lite.
Draxin said:
If you didn't delete the CID to swap firmwares before to get CM11, I wouldn't start now. Most xt910 firmwares now are JB, and once you are on the motorola JB kernel you can't go back to ICS, which was why I said that. If you weren't on a official JB before then that doesn't apply to you.
I would flash the official Firmware for your device, and yes you will have to put your device into apfastboot for RSD lite.
Click to expand...
Click to collapse
Thanks Draxin. I'll try and let know.
I was able to RSD with EU Retail JB rom. Thanks.
Here's what im gonna do
1. Root
2. Back Up CID ( dd if=/dev/block/mmcblk1p18 of=/sdcard/cid.img )
3. Delete CID ( not sure on this, but i believe its "unlock bootloader" )
Code i researched:
Code:
ap fastboot mode
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot erase cid
4. Install Safestrap ( and recovery )
5. Back up rom
6. Install rom and gapps ( MIUI 4.4.4 for umts_spyder )
am i missing something?...
or di i have to upgrade to JB before instsalling a kitkat rom?...
im running 4.0.4
No need to delete cid, you should be able to install SS after root.
Latest SS might have compatibility issues with ICS. Update to official JB if available for your device.
neo.ank said:
No need to delete cid, you should be able to install SS after root.
Latest SS might have compatibility issues with ICS. Update to official JB if available for your device.
Click to expand...
Click to collapse
There is no need for that,I'm still on ICS and I'm using SS 3.75 without any problems
Sent from my Razr XT910
welder73 said:
There is no need for that,I'm still on ICS and I'm using SS 3.75 without any problems
Sent from my Razr XT910
Click to expand...
Click to collapse
neo.ank said:
No need to delete cid, you should be able to install SS after root.
Latest SS might have compatibility issues with ICS. Update to official JB if available for your device.
Click to expand...
Click to collapse
thanks guys.... i will do it on sat.. still researching.. im new to this device eh.. will update what happen