Hi everyone! I'm new to this Moto Razr XT910, a korean version one. I have a few questions to ask:
-Is this the device that has an official support by CM? the code named umts_spyder builds? I'm just confused by the other variants ://
-Since this is a korean version with AT&T on it, can I change this to a sim-free (international version)? If so, can you link me some useful guides out there? I've searched for a couple of hours but I never found a good guide for noobies containing on how-to flashing and unlocking bt
I'm an experienced user on flashing this on that and compiling this and that but hope you could understand my situation as if this is a new phone to me Thanks alot! Just an urgent matter.
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! The only stuff that I'm worrying about is the incompatibilities between flashing an international version ROM to a region specified device which is a Korean version. After some deep searches, thank goodness I found this post on a thread being discussed about converting a region specified device into an international one. Anyway here it is:
Semseddin said:
I can't provide you in details since there're are guides for it but briefly you'd have to delete cid with fastboot or bmm but make a backup of it before deletion. You can flash all XT910 firmwares with fastboot just don't forget to delete the cdt.bin line from the RSD LITE XML files that you'd flash. This way cdt.bin partition on your device will not be upgraded to 5 or 7 and stay version 4 which is ICS.
Better create a nandroid backup of your stock rom with bmm recovery and provide necessary files from your device to find stock fastboot of XT910S ICS to firmware-team ?
Click to expand...
Click to collapse
Do you know what is RSD lite XML file and cdt.bin? is these two included on the ROM you'll flash? Anyway, once I've upgraded to ICS, can I freely flash any JB to KK based ROMs? Sorry for bothering with all of my dumbness
EDIT
Nevermind, I just knew RSD lite
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
JovieBrett said:
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
Click to expand...
Click to collapse
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
neo.ank said:
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you for the response. So it means, I will update the device via OTA update first to get the stock JB 4.1.2 then after that, I can now be able to flash custom ROMs whatever I want?
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
neo.ank said:
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you, btw do you know how to backup CID?
JovieBrett said:
Thank you, btw do you know how to backup CID?
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
WOW thank you so much! I've made a backup now ^_^ Will give you thanks later cause I've ran out of thank mehehe
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
Anyway do you know how to fix and what is the error behind this while Im flashing via RSD, it says something like "ebr failed"
Related
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
adaimespechip said:
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
Click to expand...
Click to collapse
Rds Lite with the sbf files from here:
http://forum.xda-developers.com/showthread.php?t=1747800
If you whant there is an update for tht version with shoul improove battery life and the radio
http://forum.xda-developers.com/showthread.php?t=1755764
The instruction to isntall the second update are in the first post
I forgot, if you install from rds lite maybe you need to wipe data/cache to make it work. So if you don't want to do it (but i suggest you to do it and make a backup with titanium, so the system will be clean) you have to update from the ota files
Thanks for the reply - Will give this a go when I get home later on!
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
adaimespechip said:
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
Click to expand...
Click to collapse
You have to unzip it, then with rds lite you have to select the xml file that is inside the sbf files
Managed it- upgraded to rsd 5.7 and it picked it straight up
Sent from my XT910 using xda app-developers app
Motorola xt910 Stuck in fastboot mode
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Dário_Remane said:
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Click to expand...
Click to collapse
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
sd_shadow said:
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
Click to expand...
Click to collapse
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Dário_Remane said:
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Click to expand...
Click to collapse
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
welder73 said:
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
Click to expand...
Click to collapse
Thanks mate
I will check there.
Soo... first, i just couldnt understand how to upgrade to JB while being able to go back to ICS, only to find out how easy it was after i had already flashed the Fido firmware through RSD Lite, destroying any possibility of going back to ICS -_- anyways, i rooted it and flashed a stock JB Rom i was looking forward to flashing since i started to check out the Rom selection (it was the stock JB Brasil.en.BR) and as i flashed it, the phone wouldnt boot -___- it would stay stuck right before the boot animation with the red led on.... so i managed to flash back to the Fido firmware through RSD and rooted it again, then flashed cm10.1 and it actually went well! it flashed and booted like its supposed to!! but, then again, as perfect as it seems for aosp lovers, it just aint for me... so i tried to flash the stock JB Rom i originally had in mind from cm10.1, only to see it fail again and get stuck during boot before the boot animation... then i tried flashing another JB Rom (my first rom v0.91 i believe its called) and the same happened... btw, i was wiping data, cache and dalvik cache in between each Rom flash... so, i just gave up and restored my backup of the Fido firmware that i had made before i started attempting all the flashing... for all this i used BMM v3.4 and my Razr model is XT910 LATAM... anyways, im just hoping for someone out there to illuminate me and help me understand how exactly is an individual supposed to flash a rom to an XT910?? thanks in advanced!
since you upgraded to JB, you cannot flash ics roms due to raised level of security
you can flash latam jb based roms (see artur's) and any kexec based rom
maybe you can also flash eu jb roms, but I'm not sure. You can try
To do that enter recovery (BMM, safestrap cannot flash kernels), make a backup of your kernel and CID, erase CID, Wipe all, flash eu jb kernel, flash rom, reboot
if you did remain on ICS you could flash anything you Want, but it's too late
heblu said:
since you upgraded to JB, you cannot flash ics roms due to raised level of security
you can flash latam jb based roms (see artur's) and any kexec based rom
maybe you can also flash eu jb roms, but I'm not sure. You can try
To do that enter recovery (BMM, safestrap cannot flash kernels), make a backup of your kernel and CID, erase CID, Wipe all, flash eu jb kernel, flash rom, reboot
if you did remain on ICS you could flash anything you Want, but it's too late
Click to expand...
Click to collapse
so, if i got this right, i can flash a rom from any region as long as i first flash a jb kernel of the rom's region (eg. flash an .FR jb kernel to use an .FR based rom)? if so, that pretty much leaves me wondering where i can get these kernels, and with the task to backup my stock kernel and cid... thans for ur response!
all eu jb kernels are the same and it is possible that latam and eu to be compatible
heblu said:
all eu jb kernels are the same and it is possible that latam and eu to be compatible
Click to expand...
Click to collapse
so i just need an eu jb kernel and after i flash it i can flash any rom? no matter what region as long as its gsm xt910?
Luisit0 said:
so i just need an eu jb kernel and after i flash it i can flash any rom? no matter what region as long as its gsm xt910?
Click to expand...
Click to collapse
With jb eu kernel you can flash eu jb based roms, of course, not any rom
also you can flash any kexec rom, it does not matter Which kernel you have
try to flash eu jb kernel and if succeeded flash one of roms from dev section based on this kernel
if you cannot, install artur's rom based on latam jb rom
heblu said:
With jb eu kernel you can flash eu jb based roms, of course, not any rom
also you can flash any kexec rom, it does not matter Which kernel you have
try to flash eu jb kernel and if succeeded flash one of roms from dev section based on this kernel
if you cannot, install artur's rom based on latam jb rom
Click to expand...
Click to collapse
ah ok, im pretty much clear now.. sorry for asking much, ive never had this regional restrictions on any other phone ive had.. ill go ahead and search for one of these eu kernels and see how it all goes with flashing! once again, i first flash the kernel and right after i flash the rom, right? without rebooting recovery? and also, if im using bmm, do i flash the kernel like a regular zip or using the flash kernel menu that everyone always says not to use?
first, make a backup of your kernel, then flash eu kernel, then wipe all, flash rom and reboot
make a backup of CID then erase it (not sure that is necessary for your region, but just in case)
kernels should be flashed using command flash firmware. Make sure that there is NO SPACE into the path of desired kernel like:
firmware/EU_JBKernel/boot.img any punctuation is accepted, but no space!
kexec should be flashed as regular zip
all of this is valid using BMM
for other info check this:
http://forum.xda-developers.com/showthread.php?t=2155576
tutorial of how to BMM is on the way on this thread. keep an eye on it!
heblu said:
first, make a backup of your kernel, then flash eu kernel, then wipe all, flash rom and reboot
make a backup of CID then erase it (not sure that is necessary for your region, but just in case)
kernels should be flashed using command flash firmware. Make sure that there is NO SPACE into the path of desired kernel like:
firmware/EU_JBKernel/boot.img any punctuation is accepted, but no space!
kexec should be flashed as regular zip
all of this is valid using BMM
for other info check this:
http://forum.xda-developers.com/showthread.php?t=2155576
tutorial of how to BMM is on the way on this thread. keep an eye on it!
Click to expand...
Click to collapse
Thanks for explaining it all, brother. I pretty much got it all clear now. I'm ready to flash some Roms!
Sent From An Awesome Rooted XT910!!
Luisit0 said:
Thanks for explaining it all, brother. I pretty much got it all clear now. I'm ready to flash some Roms!
Sent From An Awesome Rooted XT910!!
Click to expand...
Click to collapse
check post no 13 and also a list of good roms in OP
http://forum.xda-developers.com/showthread.php?t=2260951&page=2
heblu said:
check post no 13 and also a list of good roms in OP
http://forum.xda-developers.com/showthread.php?t=2260951&page=2
Click to expand...
Click to collapse
i noticed that thread there has 3 jb kernels.. if i wanna flash the DSEA v1.25 rom, do i flash the latam jb kernel and then the rom? also, i noticed most roms dont include the appropiate jb kernel to flash the rom.. how do i go about that?
Luisit0 said:
i noticed that thread there has 3 jb kernels.. if i wanna flash the DSEA v1.25 rom, do i flash the latam jb kernel and then the rom? also, i noticed most roms dont include the appropiate jb kernel to flash the rom.. how do i go about that?
Click to expand...
Click to collapse
Well, that thread contains kernels for eu, latam and verizon.
For DSEA you need first. Flash eu kernel and rom, order is not important.
There are a few roms based on latam, see them
For verizon check this:
http://www.droidrzr.com/index.php/forum/156-droid-razr-roms/
For them you need a gsm patch, read threads for it
Gsm patch must be flashed after the rom
hello guys
yesterday i bought Motorola RAZR XT910S
its a korean and boot with SKT logo
system version : 67.42.51.xt910s.skt.en.kr
model : xt910s
android : 4.0.4
firmware configuration version : gas_asia_spydericsskt_poo9
baseband : u_kr_04.04.00r
build number : 6.7.4-27_sa-51
it has sms issue (80 characters) and some others like brightness remain full on auto brightness but sensor works fine (using LUX app and its working fine)
Now I wanna convert it to international, retail en us or asian version
the only related thing i found is http://xt910ks.blogspot.com/
so any here converted his/her korean xt910 to other regions? if so how
Thanks
I can't provide you in details since there're are guides for it but briefly you'd have to delete cid with fastboot or bmm but make a backup of it before deletion. You can flash all XT910 firmwares with fastboot just don't forget to delete the cdt.bin line from the RSD LITE XML files that you'd flash. This way cdt.bin partition on your device will not be upgraded to 5 or 7 and stay version 4 which is ICS.
Better create a nandroid backup of your stock rom with bmm recovery and provide necessary files from your device to find stock fastboot of XT910S ICS to firmware-team ?
Semseddin said:
I can't provide you in details since there're are guides for it but briefly you'd have to delete cid with fastboot or bmm but make a backup of it before deletion. You can flash all XT910 firmwares with fastboot just don't forget to delete the cdt.bin line from the RSD LITE XML files that you'd flash. This way cdt.bin partition on your device will not be upgraded to 5 or 7 and stay version 4 which is ICS.
Better create a nandroid backup of your stock rom with bmm recovery and provide necessary files from your device to find stock fastboot of XT910S ICS to firmware-team ?
Click to expand...
Click to collapse
thanks bro, can u link me to some guide
anyone ????????
this guide could be good starting point. Remember that the guide was made for Retail.EU XT910. You still need to delete cid, if you want to flash other region fw. For further questions, use the following thread.
http://forum.xda-developers.com/showthread.php?t=2300717
Hi my friend,
I just red your message,
You could find detailed instructions in this link
http://forum.xda-developers.com/showthread.php?t=2485343
Sent from my Nexus 4 using Tapatalk
nabil_mac1 said:
Hi my friend,
I just red your message,
You could find detailed instructions in this link
http://forum.xda-developers.com/showthread.php?t=2485343
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yes dear
With ur guides and others i m running cm10.1.3 official
Glad that i could help.
Hi devs,
I had KitKat from here: (http://forum.xda-developers.com/showthread.php?t=2535920) installed in stock slot using Safestrap 3.71. Unfortunately I accidentally uninstalled the recovery from Safestrap and now the phone won't start up. Flashing from stock recovery fails. What are my options experts? How can I revive my phone? Kindly link me to resources and guide me through this. I'm lost.
Thanks & Regards,
Sreyan
Nobody on this one?? :crying:
Please help!
bugnotch said:
Nobody on this one?? :crying:
Please help!
Click to expand...
Click to collapse
Find the correct firmware that you need for your phone and flash it with RSD lite
Draxin said:
Find the correct firmware that you need for your phone and flash it with RSD lite
Click to expand...
Click to collapse
Is it possible to flash back to ICS from 4.4 over the stock slot? Do I need to flash using Fastboot or SBF? Does it have to be stock, 'coz I'm not sure if I'll even find a fastboot for a 4.4 stock.
Could you detail a bit on exactly which version of android should I flash with? That'd be of great help..
Thanks.
bugnotch said:
Is it possible to flash back to ICS from 4.4 over the stock slot? Do I need to flash using Fastboot or SBF? Does it have to be stock, 'coz I'm not sure if I'll even find a fastboot for a 4.4 stock.
Could you detail a bit on exactly which version of android should I flash with? That'd be of great help..
Thanks.
Click to expand...
Click to collapse
No, you can't go back to ICS. Your firmware flash will be official OEM Motorola firmware, so it will be Jelly Bean and why RSD lite is required. You will need the correct firmware for your region or carrier, or it won't complete the flash. read/watch tutorials first if you haven't used RSD before. Your 4.4 was a custom ROM. So there aren't any firmware flashes for it. After you have flashed with RSD and the firmware you will be bonestock, unrooted JB. From there root again, reinstall your recovery etc. etc.
Hit thanks if I helped.
Draxin said:
No, you can't go back to ICS. Your firmware flash will be official OEM Motorola firmware, so it will be Jelly Bean and why RSD lite is required. You will need the correct firmware for your region or carrier, or it won't complete the flash. read/watch tutorials first if you haven't used RSD before. Your 4.4 was a custom ROM. So there aren't any firmware flashes for it. After you have flashed with RSD and the firmware you will be bonestock, unrooted JB. From there root again, reinstall your recovery etc. etc.
Hit thanks if I helped.
Click to expand...
Click to collapse
Hi Draxin,
Thank you for the suggestion. About the OEM firmware, mine's an Asia Retail version of Razr. We never had an official firmware beyond ICS. So what do you suggest? Will deleting the CID and then flashing with a JB EU work?
bugnotch said:
Hi Draxin,
Thank you for the suggestion. About the OEM firmware, mine's an Asia Retail version of Razr. We never had an official firmware beyond ICS. So what do you suggest? Will deleting the CID and then flashing with a JB EU work?
Click to expand...
Click to collapse
If you didn't delete the CID to swap firmwares before to get CM11, I wouldn't start now. Most xt910 firmwares now are JB, and once you are on the motorola JB kernel you can't go back to ICS, which was why I said that. If you weren't on a official JB before then that doesn't apply to you.
I would flash the official Firmware for your device, and yes you will have to put your device into apfastboot for RSD lite.
Draxin said:
If you didn't delete the CID to swap firmwares before to get CM11, I wouldn't start now. Most xt910 firmwares now are JB, and once you are on the motorola JB kernel you can't go back to ICS, which was why I said that. If you weren't on a official JB before then that doesn't apply to you.
I would flash the official Firmware for your device, and yes you will have to put your device into apfastboot for RSD lite.
Click to expand...
Click to collapse
Thanks Draxin. I'll try and let know.
I was able to RSD with EU Retail JB rom. Thanks.
Hi, I have to root / unlock bootloader (if necessary) and install a custom kk rom for one of my friend. (I made him buy a xt912) ...
Any links will be very helpful. Thanks.
First, you can't unlock the bootloader.
Install the .165 JB update.
Root with Matt's Utility.
Install Safestrap.
Follow instructions on how to install a custom rom.
Find a KK rom and install on a slot in SS.
Personally, I like the Axxionkat Rom. Liquidsmooth is good also.
I rooted, installed safestrap and installed this rom :
http://www.drdevs.com/devs/axxionkat/Weekly/Motorola/Spyder - Umts/
without even bothering with slots (I don't know what they are) and had my cellphone bricked later I was able to recover it using the jb utility by installing the original firmware. What I did wrong ?
orangzeb said:
I rooted, installed safestrap and installed this rom :
http://www.drdevs.com/devs/axxionkat/Weekly/Motorola/Spyder - Umts/
without even bothering with slots (I don't know what they are) and had my cellphone bricked later I was able to recover it using the jb utility by installing the original firmware. What I did wrong ?
Click to expand...
Click to collapse
It's possible you flashed the wrong rom.
Is the phone GSM or CDMA? It will tell you in Settings>About Phone>Build Number. It will say utms, utms_spyder or just spyder.
GSM = Umts or Utms_spyder
CDMA = Spyder
The slots are there so you can install multiple roms without wiping the stock system. Some people like to have a few different roms to play with. I've never installed a rom over the stock on my Razr, I always used slot 1 in case the was some sort of catastrophe, I could always go to stock. There are many videos on youtube that show you how to use the slots.
pearlheartgtr said:
It's possible you flashed the wrong rom.
Is the phone GSM or CDMA? It will tell you in Settings>About Phone>Build Number. It will say utms, utms_spyder or just spyder.
GSM = Umts or Utms_spyder
CDMA = Spyder
The slots are there so you can install multiple roms without wiping the stock system. Some people like to have a few different roms to play with. I've never installed a rom over the stock on my Razr, I always used slot 1 in case the was some sort of catastrophe, I could always go to stock. There are many videos on youtube that show you how to use the slots.
Click to expand...
Click to collapse
Thanks alot for help mate. It says "CDMA_N_05.21.00RS LTEDC_U_09.1D.00" under baseband version and "9.8.20-72_VZW-16" under built unumber. It has android 4.1.2 is it really necessary to update to .165 first and install gapps too if I just want to install that rom ?
You don't have to update to .165 but the update fixed some bugs. When installing a custom rom, you need to install gapps. My previous phone would soft brick if I forgot to install gapps after installing the rom.
When you go to flash the rom, add the rom file and then add the gapps file. Then flash. It will flash both zips for you.
pearlheartgtr said:
You don't have to update to .165 but the update fixed some bugs. When installing a custom rom, you need to install gapps. My previous phone would soft brick if I forgot to install gapps after installing the rom.
When you go to flash the rom, add the rom file and then add the gapps file. Then flash. It will flash both zips for you.
Click to expand...
Click to collapse
Okay that means I have to go for UMTS rom right? A link for compatible gapps for this rom would be appreciated. Thanks
No. Your rom is CDMA. You have to use SPYDER. UTMS and UTMS_SPYDER are GSM roms.
Use this rom:
http://www.drdevs.com/devs/axxionkat/Weekly/Motorola/Spyder - Umts/AXXION-v1.3.0-OFFICIAL-spyder.zip
---------- Post added at 08:06 AM ---------- Previous post was at 07:45 AM ----------
The Gapps is easy to find with a simple search on the forum. Search for Kitkat Gapps in the Droid Razr 'Search This Forum' field. There's a thread for PA Gapps packages in the Droid Razr development forum.
Got it working Thanks alot even without Gapps.