When I open camera app, screen is blank and a message "camera error" shows. Do you know how to fix this? Thanks.
pedromsouza said:
When I open camera app, screen is blank and a message "camera error" shows. Do you know how to fix this? Thanks.
Click to expand...
Click to collapse
you are on stock rom or custom rom if its still stock and unroot better go to service center
Sent from my beloved GT-I8552
Try flashing stock firmware before going to service center
Guys Go here and share ur Grand Quattro Photography http://forum.xda-developers.com/showthread.php?t=2490245
try to clear Camera.apk data and reboot.
emeemisri said:
you are on stock rom or custom rom if its still stock and unroot better go to service center
Sent from my beloved GT-I8552
Click to expand...
Click to collapse
It's on stock rom now, but flash count is 3 (tryied to install docextreme but it didn't work). And it is rooted.
Reset flash counter using triangle away and flash stock or custom Rom.
Sent from my GT-I8552 using Tapatalk now Free
Dwama said:
try to clear Camera.apk data and reboot.
Click to expand...
Click to collapse
I did it and camera worked once, but then the problem returned. :/
pedromsouza said:
It's on stock rom now, but flash count is 3 (tryied to install docextreme but it didn't work). And it is rooted.
Click to expand...
Click to collapse
I think you should first use triangle away app to reset counter to zero than u should flash stock rom and check your camera if it's work than ok otherwise I recommend you to visit service center as soon as possible. But before go to service centre please boot you cell in download mode and check status ROM -- official and counter --- 0
Sent from my GT-I8552
pedromsouza said:
It's on stock rom now, but flash count is 3 (tryied to install docextreme but it didn't work). And it is rooted.
Click to expand...
Click to collapse
i think you should go to SC but b4 that make sure your flash counter is 0 and follow other members advice.
Sent from my beloved GT-I8552
I installed stock rom and resetted flash count using triangle away (thanks for the tip). The camera worked once again lol... but I'll take it to SC tomorrow.
pedromsouza said:
I installed stock rom and resetted flash count using triangle away (thanks for the tip). The camera worked once again lol... but I'll take it to SC tomorrow.
Click to expand...
Click to collapse
if it happens again just clear dalvik cache in cwm
and also force close it in app manager then clear cache then it will work again
Today I went to the SC and it was closed (some kind of holiday)... So I threw the smartphone in the backseat and camera was working! At home I opened the phone and saw that the flex cable (camera to "motherboard") wasn't fixed properly. Problem solved!
pedromsouza said:
Today I went to the SC and it was closed (some kind of holiday)... So I threw the smartphone in the backseat and camera was working! At home I opened the phone and saw that the flex cable (camera to "motherboard") wasn't fixed properly. Problem solved!
Click to expand...
Click to collapse
Sent from my GT-I8552 using Tapatalk 4
Related
I am having this problem for a while now...my camera doesn't work.when i press the icon, camera application launches with the camera buttons and then with the small preview icon on the right side being black.The screen displays what is in front of the camera but the buttons are totally not functioning. If I wait for it, it then says "camera application not responding" then gives me the option to wait or force close.
-rebooting doesn't help
-clearing data doesn't help
-using another camera application (same result)
-The best solution that I came up with is reflashing ROM (wiping everything)
-if that doesnt work, reformatting SD card
sometimes it works..sometimes not
when fixed, it just runs for a couple of weeks then afterwards, the same thing happens again and I am getting tired of it.
So I would like to seek out your help now enlightened members of xda...please help me
PS..this happens on any kind of rom (oxygen and currently LEWA OS)
Anyone out there who can help me? anyone who experiences the same issues?
Do u have any kind of cell tracking application(like androidlost or something) installed on ur phone? Or any other app that uses camera?
Sent from my LG-P500 using xda premium
kiran2cy said:
Do u have any kind of cell tracking application(like androidlost or something) installed on ur phone? Or any other app that uses camera?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
i dont remember installing any of those
Which ROM!?
Sent from my LG-P500 using Tapatalk 2
The camera work on the official firmware? (V20E) When did you first notice this problem?
Typically, problems arise with the camera when changing kernel ... Try to flash the kernel from Franko
otrazhenye said:
The camera work on the official firmware? (V20E) When did you first notice this problem?
Typically, problems arise with the camera when changing kernel ... Try to flash the kernel from Franko
Click to expand...
Click to collapse
After Flashing Oxygen V2.6, this problem started after several days...was able to resolve thru reflashing rom wiping everything but after several days reoccured.
I am already using LEWAOS M7 and it happened to me twice now.
karthiknayak94 said:
Which ROM!?
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
It first happen when I flashed Oxygen V2.6 and still reoccurring occasionally in LEWA OS M7
DistantFather said:
Anyone out there who can help me? anyone who experiences the same issues?
Click to expand...
Click to collapse
why dont you get back to stock firmware and see may solve your problem if it is really rom related problem
do a clean install by kdz or lgmdp
Hi there. I just installed newest and official Jelly Bean stock firmware (from Poland) on my Galaxy S 3. Now I can't remove pages from home screen. When I am trying to drag Page to delete it my phone freezes for 2-3 seconds and I'm getting this message : unfortunately Touchwiz stopped working. Can anyone help me to solve this problem?
go to recovery , then clear cache
dinkss86 said:
Hi there. I just installed newest and official Jelly Bean stock firmware (from Poland) on my Galaxy S 3. Now I can't remove pages from home screen. When I am trying to drag Page to delete it my phone freezes for 2-3 seconds and I'm getting this message : unfortunately Touchwiz stopped working. Can anyone help me to solve this problem?
Click to expand...
Click to collapse
Did you flashed the ROM without FULL WIPE?
Answer
Chaitanyapatel8880 said:
Did you flashed the ROM without FULL WIPE?
Click to expand...
Click to collapse
Flashed new rom with full wipe, cleared cache, cleared dalvik cache as well. Nothing helps. Think it's a facebook app! Just did everything from scratch without installing facebook app and system is working fine! Have all apps insalled and put into folders etc and all good. Anyone had issue like this before?
Facebook = multiple problem posts .
jje
Touchwiz Re-Installation
JJEgan said:
Facebook = multiple problem posts .
jje
Click to expand...
Click to collapse
Can I re-install Touchwiz alone? Without loosing my apps? I have polish official jelly bean. Where can I download Touchwiz alone for jelly bean? Will it help?
dinkss86 said:
Can I re-install Touchwiz alone? Without loosing my apps? I have polish official jelly bean. Where can I download Touchwiz alone for jelly bean? Will it help?
Click to expand...
Click to collapse
Touchwizz is in the firmware .
jje
JJEgan said:
Touchwizz is in the firmware .
jje
Click to expand...
Click to collapse
I know that Touchwiz is in the firmware but is there any option to install touchwiz alone without firmware? Just touchwiz apk alone?
dinkss86 said:
I know that Touchwiz is in the firmware but is there any option to install touchwiz alone without firmware? Just touchwiz apk alone?
Click to expand...
Click to collapse
Well you can rip the relevant files out of a rom and replace .
Or use the flashable modded TW files .
My suggestion would be to download and reflash the firmware .
jje
dinkss86 said:
Flashed new rom with full wipe, cleared cache, cleared dalvik cache as well. Nothing helps. Think it's a facebook app! Just did everything from scratch without installing facebook app and system is working fine! Have all apps insalled and put into folders etc and all good. Anyone had issue like this before?
Click to expand...
Click to collapse
I am glad I don't have FRUSTRATIONbook...
Capt. Chaitanya Patel
I'm having the same problem.
Wiped data, wiped cache, re-installed the rom, but still get the same error.
I dont have the FB app installed.
=/
Turn off developer options in settings, the green button at top right of screen and then reboot.
Remove your screens and enable your developer options and reboot again.
The problem is related to animation settings.
Sent from my GT-I9300 using xda premium
ficti0n851 said:
Turn off developer options in settings, the green button at top right of screen and then reboot.
Remove your screens and enable your developer options and reboot again.
The problem is related to animation settings.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Whoa! Finally!
Worked great! I turned off the animations, and now i just put animation to 0.5 and now is working perfectly, no need to turn off the developer settings.
Thank you!
Lawrencets said:
Whoa! Finally!
Worked great! I turned off the animations, and now i just put animation to 0.5 and now is working perfectly, no need to turn off the developer settings.
Thank you!
Click to expand...
Click to collapse
Cool, anytime.
I just turn developer setting off as its faster for me when my 18 month old gets hold of my phone and adds half a dozen screens
Sent from my GT-I9300 using xda premium
Thank u
ficti0n851 said:
Turn off developer options in settings, the green button at top right of screen and then reboot.
Remove your screens and enable your developer options and reboot again.
The problem is related to animation settings.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Cool, it worked! Thank u for the info...Great!
Sometimes when i update an app i get this error "Package file is invalid" i already tryied evcerything i found on internet and it comes back. How can i fix this for good?
ffp. said:
Sometimes when i update an app i get this error "Package file is invalid" i already tryied evcerything i found on internet and it comes back. How can i fix this for good?
Click to expand...
Click to collapse
GIve more details on which app are you talking about so that anyone here might be able to help you with your issue
The app was boat browser and the go launcher gesture, but i cleared dalvik cache and now it's working, let's see for how long and if clearing cache will do...
I'll post again if the problem comes back
I flashed the v2.0 Xgamer rom and now i get this message when i try to install titanium backup and kingsoft office... already tryied clearing dalvik...
Yeah i think it a rom issue, post your question there u will get aswer, i had same prob so i left the rom!!
sent from neo v using xda premium app
I was testing a JB rom and then i got back to X-Gamer. But as soon i flashed the rom and tried to download titanium backup to get my apps back, i got this same rror, but this time with EVERY app in market. I changed the rom to ATOMIC 7.0 and the same error appears.
Seems it's not a rom problem now, how can i fix this?
ffp. said:
I was testing a JB rom and then i got back to X-Gamer. But as soon i flashed the rom and tried to download titanium backup to get my apps back, i got this same rror, but this time with EVERY app in market. I changed the rom to ATOMIC 7.0 and the same error appears.
Seems it's not a rom problem now, how can i fix this?
Click to expand...
Click to collapse
Try flashing stock rom! See if u still have the issue
Press thanks if I helped!
Sent from my galaxy tab 2 jelly bean using Xda Premium
mitchellreece said:
Try flashing stock rom! See if u still have the issue
Press thanks if I helped!
Sent from my galaxy tab 2 jelly bean using Xda Premium
Click to expand...
Click to collapse
After flashing stock, custom and a backup i got it working again. The problem is the same as shown in this thread:
http://forum.xda-developers.com/showthread.php?t=910956
there is any way to change where the cache is saved? I must save it in Sd card...
I've started a discussion topic about Samsung's new headache SysScope and System Status: Modified
Finally we think we've fixed the problem for now (until samsung comes up with something new)
What Tested/Reported :
"Device Status" in Settings should always remain "Normal"
"System Status" on Bootloader screen should always remain "Official" (Except "Flash Counter" and "Current Binary", they are bootloader related)
FOTA Firmware Update Check is working but we're not sure because there is no update
It's reported that AllShare is working
A CWM package made from N7100 XXDME1 firmware: SysScopeFix_n7100_XXDME1.zip
* the Apk files in the cwm package may not be compatible if you have a different device/firmware. Backup your rom first!
[For Developers]
You can take a look at the modified sources and commits.
All the info you need is on Github: https://github.com/sinancetinkaya/DeviceStatus
This is an open project. If you have anything to contribute, please feel free to join.
Current Collaborators :
dwitherell (Big thanks to him)
[email protected]
I'm gonna try it soon.
After flashing this MOD, I will not be needing TriangleAway?
SandeepEmekar said:
I'm gonna try it soon.
After flashing this MOD, I will not be needing TriangleAway?
Click to expand...
Click to collapse
No, you will need it to reset Flash Counter and Current Binary
System Status (Bootloader) should always remain "Official" (Not the Flash Counter and Current Binary)
Click to expand...
Click to collapse
Thanks go back to [email protected] for getting this idea going and putting it all up on github! Glad I could lend a hand
Now hopefully some folks that know a thing or two will come by and make it even better
This really needs more attention.
Edit: To make sure it will work on all Samsung firmware (for the usual status in settings) and all ROMs (for the download mode status), is it possible to make an Xposed mod? That would be helpful, because it won't need to be adapted to every ROM.
Sent from my GT-N7100 using Tapatalk 4 Beta
hameerabbasi said:
This really needs more attention.
Edit: To make sure it will work on all Samsung firmware (for the usual status in settings) and all ROMs (for the download mode status), is it possible to make an Xposed mod? That would be helpful, because it won't need to be adapted to every ROM.
Sent from my GT-N7100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
for the settings, it should be no problem since i coped with the settings's status by modding it months ago. no idea for the counter or status in the download mode though
ykk_five said:
for the settings, it should be no problem since i coped with the settings's status by modding it months ago. no idea for the counter or status in the download mode though
Click to expand...
Click to collapse
Does the download mode need to be nodded for each ROM version?
Sent from my GT-N7100 using Tapatalk 4 Beta
hameerabbasi said:
Does the download mode need to be nodded for each ROM version?
Sent from my GT-N7100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
i have not examine about the download mode yet
ykk_five said:
i have not examine about the download mode yet
Click to expand...
Click to collapse
As far as I've seen, with TA version 2.37, it does reset the download mode custom status if you're on the stock ROM/kernel/recovery. It doesn't with version 2.99.
Sent from my GT-N7100 using Tapatalk 4 Beta
hameerabbasi said:
As far as I've seen, with TA version 2.37, it does reset the download mode custom status if you're on the stock ROM/kernel/recovery. It doesn't with version 2.99.
Sent from my GT-N7100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
i tried ta twice only and i gave up finally becoz the custom mode status in download mode is not a problem for me anymore, i mean i don care if it shows custom or not as long as i can reset/reflash the phone back to stock version for maintenance, just in case and touch wood.
although i had another idea to change to status in download mode but it is too risky and i don want to wait for 2 weeks again to get my phone's motherboard replaced (i hard bricked my note 1 before)
perhaps the op has brighter ideas to cope with it
ykk_five said:
i tried ta twice only and i gave up finally becoz the custom mode status in download mode is not a problem for me anymore, i mean i don care if it shows custom or not as long as i can reset/reflash the phone back to stock version for maintenance, just in case and touch wood.
although i had another idea to change to status in download mode but it is too risky and i don want to wait for 2 weeks again to get my phone's motherboard replaced (i hard bricked my note 1 before)
perhaps the op has brighter ideas to cope with it
Click to expand...
Click to collapse
I don't like to comment about the things (like this) that I don't know well.
To communicate with bootloader you need a kernel that has j4fs driver.
As long as I know Perseus kernel has that. And may be that's why on perseus kernel TA is able to reset it without a restart.
Somebody with a good linux kowledge can mount bootloader partition with a proper kernel like perseus and can see what ChainFire is changing.
[email protected] said:
I don't like to comment about the things (like this) that I don't know well.
To communicate with bootloader you need a kernel that has j4fs driver.
As long as I know Perseus kernel has that. And may be that's why on perseus kernel TA is able to reset it without a restart.
Somebody with a good linux kowledge can mount bootloader partition with a proper kernel like perseus and can see what ChainFire is changing.
Click to expand...
Click to collapse
i am using self modded perseus and j4fs can be loaded as modules for other kernels
btw, i really dono perseus can reset the counter on the fly. may be i will try it later. thx for ur big hints
IT IS WORKING!
I flashed it on Omega v16 and now i have status NORMAL!
Thank you and I wish you everything best in life man!!!
I have tested before with everything available so far including wiping and Triangle Away - every possible version and nothing worked! This WORKS!
Edit:
I just noticed that even though the download of apps from the Samsung store does not work yet but this does not bother me for now.
DaveBG said:
IT IS WORKING!
I flashed it on Omega v16 and now i have status NORMAL!
Thank you and I wish you everything best in life man!!!
I have tested before with everything available so far including wiping and Triangle Away - every possible version and nothing worked! This WORKS!
Edit:
I just noticed that even though the download of apps from the Samsung store does not work yet but this does not bother me for now.
Click to expand...
Click to collapse
glad to hear that. what did u do and how did u test it?
DaveBG said:
I just noticed that even though the download of apps from the Samsung store does not work yet but this does not bother me for now.
Click to expand...
Click to collapse
Yes, unfortunately Samsung has spent big efforts to mess up with our powerful Note2
They've put the same check routines into several APKs.
Honestly I have no intention/time to check all of them.
That's why we put the sources on github and wrote what we did.
Tell your rom developer about this, he can easily do the same thing to the other APKs that we've missed.
I just want only one thing from people: Please send your additional solutions(commits) to my github.
Two head is always better than one
@DaveBG
I couldn't find anything in SamsungApps.apk
Can you send the not working program's apk you've downloaded from the Samsung App Store?
DaveBG said:
...I just noticed that even though the download of apps from the Samsung store does not work yet but this does not bother me for now.
Click to expand...
Click to collapse
Yes, what [email protected] said - more info/names of apks that aren't working would be awesome
I've installed this mod and I still have modified in device status in settings and the same in download mode plus I have flash count 1 in download mode even though I've reset flash counter in triangle away. BTW triangle away shows me flash counter 0, and system status normal but other options that I mentioned shows me modified. I'm using Adam kernel, Philz recovery and DMC3 firmware.
Wysłane z mojego GT-N7100
za pomocą Tapatalk 4
djlukas1983 said:
I've installed this mod and I still have modified in device status in settings and the same in download mode plus I have flash count 1 in download mode even though I've reset flash counter in triangle away. BTW triangle away shows me flash counter 0, and system status normal but other options that I mentioned shows me modified. I'm using Adam kernel, Philz recovery and DMC3 firmware.
Wysłane z mojego GT-N7100
za pomocą Tapatalk 4
Click to expand...
Click to collapse
Saw that, investigating
Okay guys, for now we're trying to get rid off SysScope completely
For now FOTA firmware update checking is working without SysSope (I guess )
You can see more details on github
That's all for now
I get this error "Can't connect to camera'
I tried using a 3rd party camera from play store, but still when I try to film, it freezes and 2 sec later it closes. when opening it, error.
I read somewhere that bootloader must be working good with rom? I don't wan't to brick my phone with messing around with odin.
Factory reset doesn't work, I always do a clean install on carbon rom update.
PS: I am using Dalvik runtime, maybe fix on ART?
I don't know how to fix, used rom & kernel in my signature.
same problem with art...
already 40 views and no answer?
GreekBlood said:
same problem with art...
already 40 views and no answer?
Click to expand...
Click to collapse
if it works properly in ROM provided Camera App ??
if it works then try again installing app again..
if not then.. try different 4.4.2 ROM.. or ask in OP's thread if all users have this problem..??
if only you are having this problem then.. start from the scratch again.. and install ROM again by following steps provided in OP's post..
if still didn't work try in any other ROM or stock ROM..
akhil17kr said:
if it works properly in ROM provided Camera App ??
if it works then try again installing app again..
if not then.. try different 4.4.2 ROM.. or ask in OP's thread if all users have this problem..??
if only you are having this problem then.. start from the scratch again.. and install ROM again by following steps provided in OP's post..
if still didn't work try in any other ROM or stock ROM..
Click to expand...
Click to collapse
I will try later, don't have much time now. I got this problem also with the in build cam app.
GreekBlood said:
I get this error "Can't connect to camera'
I tried using a 3rd party camera from play store, but still when I try to film, it freezes and 2 sec later it closes. when opening it, error.
I read somewhere that bootloader must be working good with rom? I don't wan't to brick my phone with messing around with odin.
Factory reset doesn't work, I always do a clean install on carbon rom update.
PS: I am using Dalvik runtime, maybe fix on ART?
I don't know how to fix, used rom & kernel in my signature.
Click to expand...
Click to collapse
If your ROM is based on CM, it's the ROM issue. Know for a loooooooooong time.
Smack that Thanks button if I helped!
KitKat came in on my OmniROM, running on my Note 2.
Sent from a small country called Singapore.
P.S. Time for school, not much time for XDA
GreekBlood said:
I get this error "Can't connect to camera'
I tried using a 3rd party camera from play store, but still when I try to film, it freezes and 2 sec later it closes. when opening it, error.
I read somewhere that bootloader must be working good with rom? I don't wan't to brick my phone with messing around with odin.
Factory reset doesn't work, I always do a clean install on carbon rom update.
PS: I am using Dalvik runtime, maybe fix on ART?
I don't know how to fix, used rom & kernel in my signature.
Click to expand...
Click to collapse
it is a bug buddy wait for it to get fixed
bhavstech said:
it is a bug buddy wait for it to get fixed
Click to expand...
Click to collapse
Hmmm, I want it to get fixed ASAP, otherwise I can not film for my youtube account (in my signature)
GreekBlood said:
Hmmm, I want it to get fixed ASAP, otherwise I can not film for my youtube account (in my signature)
Click to expand...
Click to collapse
Billions of fixes have been implemented, but apparently non of them work. If u get lucky, it'll work. So I'll recommend reflashing till u get it to work.
Smack that Thanks button if I helped!
KitKat came in on my OmniROM, running on my Note 2.
Sent from a small country called Singapore.
P.S. Time for school, not much time for XDA