I'm sorry to post another yet another boot-loop post, however I have found the suggestions from other threads were to no avail.
I rather naively attempted to root and flash a custom ROM earlier today due to growing frustration over TouchWiz and its associated apps. So I rooted my phone using Chainfire's CF-AutoRoot and Odin.v3 which seemed to work perfectly and my phone booted fine afterwards. I then went into the Play store and downloaded ClockworkMod Recovery and created a recovery image of my phone. Then using the download and install ROM feature of ClockworkMod I downloaded Cyanogenmod and downloaded the most recent stable release (cm-10.1.3?). However when I tried to flash and restart it warned me that my storage was too low so I stupidly transferred the backup I had made from my s3 to my computer. When I tried to flash the second time the install appeared to work and my phone rebooted, however it is now stuck on the Cyanogenmod boot screen.
I can access Odin on the phone as well as the recovery mode, but I am at a loss as what to do next.
Thank you.
AlexFrancis said:
I'm sorry to post another yet another boot-loop post, however I have found the suggestions from other threads were to no avail.
I rather naively attempted to root and flash a custom ROM earlier today due to growing frustration over TouchWiz and its associated apps. So I rooted my phone using Chainfire's CF-AutoRoot and Odin.v3 which seemed to work perfectly and my phone booted fine afterwards. I then went into the Play store and downloaded ClockworkMod Recovery and created a recovery image of my phone. Then using the download and install ROM feature of ClockworkMod I downloaded Cyanogenmod and downloaded the most recent stable release (cm-10.1.3?). However when I tried to flash and restart it warned me that my storage was too low so I stupidly transferred the backup I had made from my s3 to my computer. When I tried to flash the second time the install appeared to work and my phone rebooted, however it is now stuck on the Cyanogenmod boot screen.
I can access Odin on the phone as well as the recovery mode, but I am at a loss as what to do next.
Thank you.
Click to expand...
Click to collapse
Choose Wipe data.Factory Reset from recovery
Then, Wipe Cache and, go to Advanced and choose Wipe Dalvik Cache reboot if that not work read this and learn all the basics of flashing roms especially backing up efs folder...
Read this http://forum.xda-developers.com/showthread.php?t=1931790
. I then went into the Play store and downloaded ClockworkMod Recovery and created a recovery image of my phone. Then using the download and install ROM feature of ClockworkMod I downloaded Cyanogenmod and downloaded the most recent stable release (cm-10.1.3?
Suggest you use the standard method as posted not this one .
Fixed
tallman43 said:
Choose Wipe data.Factory Reset from recovery
Then, Wipe Cache and, go to Advanced and choose Wipe Dalvik Cache reboot if that not work read this and learn all the basics of flashing roms especially backing up efs folder...
Read this http://forum.xda-developers.com/showthread.php?t=1931790
Click to expand...
Click to collapse
Thank you very much for your help. I had already tried this a few times to no avail, but after you posted I figured it would be worth giving it one more try, and lo and behold it worked! Thanks again
Related
I rooted my device using Gingerbreak.
I have 2.2.2 installed out of the box. I installed CWM. I installed busybox.
Busybox failed. I tried all the versions that it contains.
I checked root status, and RootCheckBasic says I'm rooted.
I installed Flash ClockworkMod Recovery. It will not reboot to CWM.
It only reboots to the standard Android recovery.
I'm trying to install Bumblebee ROM 2.4.
Here are some things I am having issues understanding with it...
Backup current apps and their data with Titanium Backup (available in the Market). Is this required? The phone is new. I have nothing to back up.
Do a nandroid backup in recovery before doing anything else below.
And the nandroid backup is done with CWM? Again CWM won't reboot, only the standard Android recovery boots.
Required if installing BB 2.x for the first time: Wipe. Wipe it all. Data, cache, system, dalvik-cache, sd-ext if you've got it (might need to look under Advanced or Mounts in recovery to do the last two, and while you're there format /system). I assume you wipe it all with CWM while in recovery?
If upgrading from BB 2.3, wipe cache (and only cache) in recovery.
Does not apply to me
If not upgrading from 2.3, install Wiper zip (see below), just to be extra sure that all is wiped. Don't reboot yet. Installing wiper.zip is done by sideloading using adb commands?
Install ROM zip (see below).
I assume this too is done by copying the zip to the external SD, then selecting update from SD card in recovery... right?
Please someone shed some light on this for me.
In standard Android recovery it says e3. I know on my Captivate I had to use Odin to install GB loaders to get it to work.
THANKS!
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
tvall said:
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
Click to expand...
Click to collapse
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
bulltproof said:
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
Click to expand...
Click to collapse
Oh, okay, um... are you using the reboot into recovery option in rom manager right after flashing?
After flashing what?
I reboot into recovery through rom manager and get:
Android system recovery <3e>
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
_________________________________________________________
Android System recovery...
Do not pull out the battery!!
After hitting flash clockworkmod recovery, immediately hit reboot recovery
After hitting anything in CWM it did nothing more than reboot into the standard android recovery.
This phone has 2.2.2 on it. Problem? Probably.
I followed instructions at androidcentral and got it to work.
Needed Xionia_CWMA_12518.6_VM
Installed BACKside-IHO-VM670-11222011
using Xionia_CWMA_12518.6_VM_Recovery-signed
Had a little problem today and needed to activate the phone. BUUUUT......
the rom didn't allow activation.
So I installed Bumblebee. No go.
Then I tried [rom] basic stock rom.
Neither of these will let my phone boot. It gets stuck at boot.
Nothing happens.
I can still boot into Xiona_CWMA. But no roms will work.
PLEASE HELP!!!!
Dude i m noob, and i m facing same problem,
I did root with super one click soc, and it is rooted and i am using root needed apps,
But when i m trying to clobk work recovery (i did flashing CWR from rom manager and aft that i select boot from cwr option from rom manager) it just factory reset i did this 3time all time just factory reset, then i again did but while rebooting i click home button so it gave me same option which came to above member said some e3............
And i try to select any option from it with menu button it was not applied, and no use so i removed battry and place again and start then device started dont know more what to do, help
Sent from my LG-P500 using Android-HQ App
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Bullet if u found solution pls tell me too
Sent from my LG-P500 using Android-HQ App
bulltproof said:
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Click to expand...
Click to collapse
I believe that may be due to the newer display in your phone (I'm new to this device so I dont know much yet). From the little bit of information I've gathered, devices manufactured recently have a different display that requires a kernel that supports it. In the iho roms this is included, on others you'll need to flash a kernel right after the rom.
For the stock rom I can upload what I use if you need it. Its basically the one posted here just with the boot.img swapped with one from a nandroid backup I made before switching roms
I think you're spot on with that idea.
I loaded CM7 variant, and it worked.
My question is, how do I get another ROM on it if it has the newer screen?
I loaded different kernels that were supposed to fix it, but no go.
Hi Guys
I am new to playing around with android but not to electronics. I have a Verizon Samsung Galaxy Tab 10.1 16gb (SCH-i905) with current 4g service.
Here is the problem I am having:
It started yesterday, I was browsing the web and the tablet froze and then rebooted. After the reboot programs randomly freeze and crash, if I reboot anything I have downloaded is gone and anything I deleted is back and I can't install or remove apps. I figured I had something corrupted and a factory wipe would fix it. Unfortunately when I perform a factory wipe from the menus or through Android recovery nothing happens. The tablet boots up like nothing was erased. Still has all my accounts, security pin, apps, and so on.
So after that I figured I would flash the tablet, I found the thread here in the development forum with the stock 3.2 image to load through ODIN. I downloaded everything, followed the instructions. ODIN says the flash was successful but when the tablet reboots it still has all my info and is running 4.0.4. I have tried this multiple times. I have tried loading CWM with ODIN but it will not stick.
Any thoughts? If you need more information I will get it, I am just stuck and can't find anything that helps me with this problem!
Thanks for your help!!!
If you want cwm to load after you install it using odin, then you must immediately boot the tablet into recovery without letting it run normally. During the normal boot process, CWM is deleted and the stock recovery is restored. Therefore once Odin finishes installing CWM, hold the volume up button and once you get to the recovery mode you will be running CWM instead of the stock recovery module.
Regards,
Michael
Yes, I did read that in the multiple thread about installing CWM and have gone into recovery directly after ODIN reboots the tablet, however it is still only the stock recovery app.
Any ideas why the factory reset / data wipe won't work?
So after several more hours working on this problem I think I have come across the root cause. I believe that my internal storage has corrupted and is now only mounting in Read-Only mode. From everything I can find online, without having root access previously, this is a no go for fix it yourself.
In case anybody happens on this post down the road, I have been unable to find a resolution and it would appear I must sent the unit back to Samsung for repair.
Mixinitup4Christ said:
So after several more hours working on this problem I think I have come across the root cause. I believe that my internal storage has corrupted and is now only mounting in Read-Only mode. From everything I can find online, without having root access previously, this is a no go for fix it yourself.
In case anybody happens on this post down the road, I have been unable to find a resolution and it would appear I must sent the unit back to Samsung for repair.
Click to expand...
Click to collapse
factory reset through the stock recovery should be able to get you out of it (RO filesystem).
pershoot said:
factory reset through the stock recovery should be able to get you out of it (RO filesystem).
Click to expand...
Click to collapse
I guess that blows my theory out of the water. I can't make heads or tails with this. No matter what I do, Menu Factory Reset, Recovery Wipe/Reset, ODIN Flash Stock EG01 firmware, ODIN flash CWM Recovery as soon as this device reboots I am right back where I started....... GAH!!!
Thanks for letting me know I'm probably wrong.
Mixinitup4Christ said:
I guess that blows my theory out of the water. I can't make heads or tails with this. No matter what I do, Menu Factory Reset, Recovery Wipe/Reset, ODIN Flash Stock EG01 firmware, ODIN flash CWM Recovery as soon as this device reboots I am right back where I started....... GAH!!!
Thanks for letting me know I'm probably wrong.
Click to expand...
Click to collapse
it has to be factory reset through the stock recovery (it will format /data), not through CWM.
rozeins gone
pershoot said:
it has to be factory reset through the stock recovery (it will format /data), not through CWM.
Click to expand...
Click to collapse
Yup, done that multiple times. I'll take video of it if you want, Factory Reset in stock recovery has no effect.
Mixinitup4Christ said:
Yup, done that multiple times. I'll take video of it if you want, Factory Reset in stock recovery has no effect.
Click to expand...
Click to collapse
odin flash CWM (you can use 6.0.2.8 in JB CM10 folder on droidbasement), boot it and try to format the /system partition first then /data.
pershoot said:
odin flash CWM (you can use 6.0.2.8 in JB CM10 folder on droidbasement), boot it and try to format the /system partition first then /data.
Click to expand...
Click to collapse
Will Do, ODIN3 1.85?
pershoot said:
odin flash CWM (you can use 6.0.2.8 in JB CM10 folder on droidbasement), boot it and try to format the /system partition first then /data.
Click to expand...
Click to collapse
HI Pershoot!
I forgot to say thanks for your help!! I appreciate someone smarter than me lending a hand.
That said, I just tried to flash CWM from DB Galaxy Roms/CM10 folder. Upon reboot the tablet still entered stock recovery, I have tried this several times, but this time I took a video. If you feel so inclined to watch it maybe you can catch me doing something wrong....
Again thanks for your help!!
Video of me doing the Stock Recovery Factory Reset
Video of me attempting to flash CWM from droid basement
Mixinitup4Christ said:
HI Pershoot!
I forgot to say thanks for your help!! I appreciate someone smarter than me lending a hand.
That said, I just tried to flash CWM from DB Galaxy Roms/CM10 folder. Upon reboot the tablet still entered stock recovery, I have tried this several times, but this time I took a video. If you feel so inclined to watch it maybe you can catch me doing something wrong....
Again thanks for your help!!
Video of me doing the Stock Recovery Factory Reset
Video of me attempting to flash CWM from droid basement
Click to expand...
Click to collapse
I had to do this on mine. http://techne.alaya.net/?p=8829. I rooted and modified the file described in the steps. Weirdly enough it still booted into stock recovery the first time I installed CWM. I installed CWM one more time and the tablet now boots into CWM.
Hello guys, so previously I was on nameless rom 4.4, and i wanted to change my recovery from cwm recovery to twrp recovery. So I used this app from the playstore to do it TWRP Manager app. Anyways this app seemed pretty buggy to me, and it was requesting me to install busybox, so i just followed the instructions. Anyways, after it had finished installing twrp, I wanted to test it out. So, when i tried to reboot in recovery, the phone is now stuck on the samsung logo. Cant even boot normally. What should i do now?
lopiop said:
Hello guys, so previously I was on nameless rom 4.4, and i wanted to change my recovery from cwm recovery to twrp recovery. So I used this app from the playstore to do it TWRP Manager app. Anyways this app seemed pretty buggy to me, and it was requesting me to install busybox, so i just followed the instructions. Anyways, after it had finished installing twrp, I wanted to test it out. So, when i tried to reboot in recovery, the phone is now stuck on the samsung logo. Cant even boot normally. What should i do now?
Click to expand...
Click to collapse
Try and reboot into recovery holding up power and home keys then wait galaxy s3 to be displayed then the phone should boot into recovery. From there do a wipe data factory reset, wipe cache and wipe dalvik cache. I would recommended using the latest Clockworkmod recovery as it seems reliable. You can install it using Rom Manager from Play Store, as long as you have root follow the necessary instructions to flash the recovery.
tail.adam said:
Try and reboot into recovery holding up power and home keys then wait galaxy s3 to be displayed then the phone should boot into recovery. From there do a wipe data factory reset, wipe cache and wipe dalvik cache. I would recommended using the latest Clockworkmod recovery as it seems reliable. You can install it using Rom Manager from Play Store, as long as you have root follow the necessary instructions to flash the recovery.
Click to expand...
Click to collapse
i tried to manually reboot into recovery, but it wont enter.
can you use adb sideload if you cannot enter recovery?
lopiop said:
i tried to manually reboot into recovery, but it wont enter.
Click to expand...
Click to collapse
You may need to flash back to stock using Odin then re rooting again.
so i should flash the latest stock rom (4.3) for my region using odin? like this guide http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
fixed using odin, though rather sad that my internal sd got wiped as well
lopiop said:
fixed using odin, though rather sad that my internal sd got wiped as well
Click to expand...
Click to collapse
Glad it's fixed I would recommend not to use apps from playstore to flash recoveries or roms seen nothing but trouble from them.Either use Odin or custom recovery to flash to avoid trouble in the future.
I was using my phone and all had been working fine for ages. It was in my pocket for a while and when i took it out to use it I saw that it was on the boot animation of CM11. My phone was already on when I last used it so I had assumed it had crashed. I took the battery out and turned the phone on again but it got stuck on the CM boot animation. The last time I turned on my phone before that was when I flashed a supersu zip file to make my root work as I was having some problems. After flashing the supersu zip and told my CWM recovery to restart the system, it prompted me to "fix root" or something like that, and I clicked yes and it booted normally. That was the last time it booted normally before being stuck as it is now. First thing I did after it got stuck was go into recovery and reflash my current rom ( a CM11 snapshot) I then got faced with a status 7 error and so couldnt flash the rom. So then I flashed multiple other CM11 roms, none of which worked, so I flashed a CM10.2 stable rom which worked. I then got faced with the fix root before reboot thing and so I clicked yes. Still had the stuck booting thingy. I tried many things, flashing kernals roms gapps etc and nothing made a difference. I wiped cache, dalvik cache and no difference. I even wiped the system and tried to flash roms but only the 10.2 one would work, still got a status 7 with the CM11 ones. When I wiped my data however and flashed CM 10.2, it booted. I still couldn't flash the CM11 roms though even after a factory reset. So I have the reason to believe something in the data is wrong, not cache system or anything like that. What could it be? I don't want to have to lose all my data in order to be able to use my phone again, even then, something is still wrong as my phone won't flash CM11 roms anymore. So my questions are;
What things could have caused this?
Can this be a problem from flashing the supersu zip (a root issue)
Is it possible to somehow view or copy the internal data on a computer (since I cant get into the operating system), and this would allow me to get all my pictures contacts music etc anything so I can use my phone by wiping data?
Thanks, sorry this is quite long and probably hard to understand whats going on, but help is appriciated thanks
Don't fix root if you wish to use SuperSU instead builded-in cm superuser. Also try to flash via Odin latest recovery. TWRP should be fine. You can mount partitions from recovery level to download data to your computer. Of course if it still exists. If not, if they are corrupted you need to flash stock ROM and repeat whole cm11 adventure again. If Odin successfully flash the stock then it's a chance your partition layout and user data are untouched.
____________________________________________
P3110 / I9300 / I9100 / NEXUS 5 / iPAD2
Hi everyone, I have a problem with my phone.
It is no longer booting into the OS, instead it boots into the recovery mode.
So here's what happened. I was on Google Play Store looking for some utility apps, and found this "[ROOT] Rashr" app, read its details and got interested in it since I also do wanna try to back up my CWM Recovery. I don't even completely understand what it means, but as what the apps says, I really thought that with it, backing up my recovery will be very easy, just like how ROM is backed up when you do a NANDroid backup. So, after it was installed, I head on to its Back-Up section, ticked the box for "Recovery", and tapped on "Go", expecting that it would work. It said "Rebooting..." and booted to recovery mode, so I thought that I had to complete the "Recovery Back-Up" inside CWM, so I spent time looking through the options. And, this is where I discovered that CWM has a rainbow color mode. When I found out that no signs of back up could be done in CWM, I rebooted from within CWM. BUT, it still booted to Recovery Mode.
I tried . . .
Odin, but since it boots only to recovery, Odin isn't detecting it.
Wiped the data, cache partition, and Dalvik cache. Then restore.
Can this be fixed? I badly need help.
I have:
CWM Recovery v6.0.3.6 (used when I rooted the phone), updated to v6.0.4.5 (current)
Stock ROM 4.1.2
Recent NANDroid Backup
Any inputs will be very much appreciated. Thanks.
No intention of giving the "Rashr" app a bad name. I just didn't know how to use it.
Endroyed said:
My device is no longer booting into the OS, instead it boots into the recovery mode.
So here's what happened. I was on Google Play Store looking for some utility apps, and found this "[ROOT] Rashr" app, read its details and I got interested in it since I also do wanna try to back up my CWM Recovery. I don't even completely understand what it means, but as the apps says, I really thought that with it, backing up my recovery will be very easy, just like how ROM is backed up when you do a NANDroid backup. So, after it was installed, I head on to its Back-Up section, ticked the box for "Recovery", and tapped on "Go" with expecting that it would work. It said "Rebooting..." and it booted to recovery mode. And I thought that I had to complete the "Recovery Back-Up" inside CWM, so I spent time looking through the options. When I found out that no signs of back up could be done in CWM, I rebooted from within CWM. BUT, it still booted into Recovery Mode. Can this be fixed?
I have:
CWM Recovery v6.0.3.6 (used when I rooted the phone), updated to v6.0.4.5 (current)
Stock ROM 4.1.2
Recent NANDroid Backup
Click to expand...
Click to collapse
Flash Stock Revovery.
http://forum.xda-developers.com/showthread.php?t=2716953
Can Download From Here.
put into memory card.
and select install zip external-sd card select zip and flash it
Cheers!
manojkumar8552 said:
Flash Stock Revovery.
http://forum.xda-developers.com/showthread.php?t=2716953
Can Download From Here.
put into memory card.
and select install zip external-sd card select zip and flash it
Click to expand...
Click to collapse
I never thought the solution would be that simple. Hehe Thanks manoj. :good:
Finally fixed it!
What I did:
1) Flashed the stock Recovery. I was surprised it was able to boot to Android cause I was thinking that the zip is only the stock recovery. It had errors though. Home Screen won't appear or load.
2) When rebooted, it got stuck in SAMSUNG boot animation, but it was all good cause Odin was still able to detect it which means it can still be rooted. So . . .
3) Flashed CWM Recovery v6.0.3.6
3) Wiped data, cache partition, and Dalvik cache.
4) Restored the backup.
Endroyed said:
I never thought the solution would be that simple. Hehe Thanks manoj. :good:
Click to expand...
Click to collapse
No Problems Buddy !!!
Step by step getting all f,,,, Fundas of Android soon