I have a small problem that I hope some one can help me on? I get this message on boot up
KERNEL IS NOT SEANDROID ENFORCING
If you could direct me to it I would be greatful.
claude9039u said:
I have a small problem that I hope some one can help me on? I get this message on boot up
KERNEL IS NOT SEANDROID ENFORCING
Click to expand...
Click to collapse
You flashed a kernel that turned of SELinux, it's pretty self explanatory.
Sent from my SM-N900P using Tapatalk
But how can I fix it?
(have same problem on my i9505)
Mark
It's just a warning message, there is nothing problematic about it.
However, the solution would be to flash a stock kernel:
http://samsung-updates.com/details/14398/Galaxy_Note_3_Sprint/SM-N900P/SPR/N900PVPUBMI3.html
Tekara said:
It's just a warning message, there is nothing problematic about it.
However, the solution would be to flash a stock kernel:
http://samsung-updates.com/details/14398/Galaxy_Note_3_Sprint/SM-N900P/SPR/N900PVPUBMI3.html
Click to expand...
Click to collapse
thx dude. I had the same problem.. after i flashed ABYSS kernel. Even now i was doing clean rom install but the kernel it is still there. (and the note). But is seems like good kernel, and if you says "nothing problematic about it" im gonna keep it little while
Tekara said:
It's just a warning message, there is nothing problematic about it.
However, the solution would be to flash a stock kernel:
http://samsung-updates.com/details/14398/Galaxy_Note_3_Sprint/SM-N900P/SPR/N900PVPUBMI3.html
Click to expand...
Click to collapse
how to flash stock ROM ?
Simonka said:
how to flash stock ROM ?
Click to expand...
Click to collapse
Stock firmware you flash with Odin
theresident said:
Stock firmware you flash with Odin
Click to expand...
Click to collapse
it failed on me
Did you put on PDA and are you sure that you got the firmwate for your phone?... Odin cant fail....
theresident said:
Did you put on PDA and are you sure that you got the firmwate for your phone?... Odin cant fail....
Click to expand...
Click to collapse
i downloaded mine STOCK 3UK ROM official I unrared file that it will be .tar then i opened odin choosed PDA picked N9005XXUDMJ6_N9005H3GDMJ2_N9005XXUDMJ4_HOME.tar.md5
hit start it said please wait and then FAILED
If you got odin 3.09 try with AP option ..
theresident said:
If you got odin 3.09 try with AP option ..
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And your phone is in Download Mode ?
I dont get it...
---------- Post added at 12:45 AM ---------- Previous post was at 12:40 AM ----------
theresident said:
And your phone is in Download Mode ?
I dont get it...
Click to expand...
Click to collapse
pleeeasee. stop asking like am idiot
Try with diferent firmware for your phone
Simonka said:
---------- Post added at 12:45 AM ---------- Previous post was at 12:40 AM ----------
pleeeasee. stop asking like am idiot
Click to expand...
Click to collapse
dude i dont want to hurt your bubble this happen to me too.
as of right now u cant knox has kicked in yo phone and left in other words a watermark that says kernel not seandriod enforcing. im pretty sure a dev will have a workaround on it.If you have to return your phone try to find a stock rooted rom and hit super su and hit setting and scroll all the way down and hit full unroot. it will unroot but the watermark will still be there.
Something isn't jiving here, you are in the Sprint forums and yet it looks like you are attempting to flash 9005 (not sprint) firmware. If you do have a Sprint phone, you need to be flashing 900P firmware.
Sprint Note 3 firmware: http://samsung-updates.com/device/?id=SM-N900P
DjMizzTikk said:
dude i dont want to hurt your bubble this happen to me too.
as of right now u cant knox has kicked in yo phone and left in other words a watermark that says kernel not seandriod enforcing. im pretty sure a dev will have a workaround on it.If you have to return your phone try to find a stock rooted rom and hit super su and hit setting and scroll all the way down and hit full unroot. it will unroot but the watermark will still be there.
Click to expand...
Click to collapse
are u sure? so even we already made it back to official Fmw without root mdofication.. just the real stock.. the watermarks still there? that awful.. so maybe ill stay in my cusrom then
ZachariasErsa said:
are u sure? so even we already made it back to official Fmw without root mdofication.. just the real stock.. the watermarks still there? that awful.. so maybe ill stay in my cusrom then
Click to expand...
Click to collapse
Once you flash the stock kernel back on there it goes away, I've done it on my phone multiple times while testing kernels.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was on 2.3.4 OTA updated once AT&T i tried to unlock it's bootloader after rooting
i did everything right but while unlocking bootloader it got failed
sorry if it was posted before i googled and every link provied for solution was dead
can anyone give me a solution and working links thanks for reading
Youre already in fastboot mode. Simply follow the instructions for using fastboot to unlock. This is not a hardbrick and is a normal part of unlucking phones on 4.5.91+.
OMG this video worked fine and now i have my phone back working http://www.youtube.com/watch?v=pspIVBKGPRU
i installed permanent recovery can i install any custom rom ?
kasrawis said:
OMG this video worked fine and now i have my phone back working http://www.youtube.com/watch?v=pspIVBKGPRU
i installed permanent recovery can i install any custom rom ?
Click to expand...
Click to collapse
Yes, you can start flashing custom rom. Be sure to perform nandroid backup before flashing.
Sent from my MB860 using xda premium
can you give me a working link for custom firmware i can download ?
i am trying to find the video but it has been removed
can u post another link to another video or soo.....
i am exactly where you first post is
HELPPPPPPPPPPPPPP
Download the programe: https://www.dropbox.com/s/1qryq20dhduqiqx/Auto-Unlock Bootloader.rar
this programe has the fix of your problem. RUN the 'MAIN.bat' in the file. I do not remember its number in the menu but the menu will lead you to solve the problem. It must be 'FIX 105:1:2' or something like that.
Hit the 'thanks' if I helped
pls pls pls tell me its not bricked
tapeworm_george said:
Youre already in fastboot mode. Simply follow the instructions for using fastboot to unlock. This is not a hardbrick and is a normal part of unlucking phones on 4.5.91+.
Click to expand...
Click to collapse
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash. and if i plug it into the usb it won't power on at all. just flashes the green light and nothing. if i plug it into a wall it brings up that screen. Will it not charge??? ugh pls pls pls help me. I just got this phone. I think i flashed the wrong sbf on it? idk what to do!!!!!! :crying::crying:
---------- Post added at 02:18 AM ---------- Previous post was at 02:07 AM ----------
karma1385 said:
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash. and if i plug it into the usb it won't power on at all. just flashes the green light and nothing. if i plug it into a wall it brings up that screen. Will it not charge??? ugh pls pls pls help me. I just got this phone. I think i flashed the wrong sbf on it? idk what to do!!!!!! :crying::crying:
Click to expand...
Click to collapse
AND everything i DL trying to get the stuff to fix it. won't open. keeps saying unexpected end of archive and blah blah blah in winrar. idk wtf to do. im so frustrated right now. and i doubt anyone is gonna answer me cuz this thread is 6mon old. AHHHHHHHHHHH
karma1385 said:
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2054338
read the whole thread. the answer should be there.
I would flash ClockWorkMod as recovery.
http://www.clockworkmod.com/rommanager (search for Atrix 4G)
I prefer the Touch version, much easier to use.
Then just flash with fastboot:
fastboot flash recovery <yourImagePath>.img
Click to expand...
Click to collapse
Also, check out ePinter's CM10 (not the 10.1, it's not that stable), which you can flash from the new recovery. Don't forget the Google Apps package (install AFTER the main image).
http://forum.xda-developers.com/showthread.php?t=1781970
Im after stock firmware to flash via cwm.Ive searched on here(unsatisfactory results due to dead links and this apps limtations).Also tried to join sammobile(couldnt due to some antispam input not working).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100
theunderling said:
Im after stock firmware to flash via cwm.Ive searched on here(unsatisfactory results due to dead links and this apps limtations).Also tried to join sammobile(couldnt due to some antispam input not working).
View attachment 1224953
Sent from my GT-I9100
Click to expand...
Click to collapse
I am not sure if you can flash stock firmware via CWM. For Odin compatible files see: forum.xda-developers.com/showthread.php?t=1075278
Ok thanks.Would unrooting it work out the same as going back to stock.I have nand backups of siyah kernel and stock kernel,and Ive reset the counter/triangle away.
Could I follow this guide and it would ok for going back to samsung and retain my warranty
Sent from my GT-I9100
theunderling said:
Im after stock firmware to flash via cwm.Ive searched on here(unsatisfactory results due to dead links and this apps limtations).Also tried to join sammobile(couldnt due to some antispam input not working).
View attachment 1224953
Sent from my GT-I9100
Click to expand...
Click to collapse
try here
http://samsung-updates.com/latest-firmware/
Go to sammobile.com and login or register and here are all the stock firmwares
mrbluesman said:
try here
http://samsung-updates.com/latest-firmware/
Click to expand...
Click to collapse
Thanks,I will try that when I get a computer.
Rayner1234 said:
Go to sammobile.com and login or register and here are all the stock firmwares
Click to expand...
Click to collapse
I cant do that,I said that in the op.Ive even got the app and thats just as handy.Maybe I cant register using my phone,this antispam line doesnt do anything
Sent from my GT-I9100
theunderling said:
Thanks,I will try that when I get a computer.
I cant do that,I said that in the op.Ive even got the app and thats just as handy.Maybe I cant register using my phone,this antispam line doesnt do anything
Sent from my GT-I9100
Click to expand...
Click to collapse
If you haven't got access to a computer you can do it all on your phone and flash with mobile odin
Sent from my GT-I9100 using xda app-developers app
Thanks,Ive got odin mobile pro but I'll need to figure out how to work it as I thought I had to download files for it to use them.
Sent from my GT-I9100
theunderling said:
Thanks,Ive got odin mobile pro but I'll need to figure out how to work it as I thought I had to download files for it to use them.
Sent from my GT-I9100
Click to expand...
Click to collapse
piece of piss
Hey Hey,you tube is my friend.
Sent from my GT-I9100
update;
I have managed to unroot the phone but I cant seem to root it again......very strange.I have tried following this method http://forum.xda-developers.com/showthread.php?t=1501719 but there is a problem.
when I install the cwm zip(think its v5.8),I basically cant do anything in its menu.It only scrolls down once in the menu,then hangs/freezes.Once it did work and I was trying to install the busybox stuff,but it couldnt find anything to install.I cant remember but I did see a " e:verification signature error".
So I tried to root using odin and basically it wont flash the required .tar file for rooting successfully and Ive got to keep reflashing the stock .tar file...
Has anyone encountered these problems before.
theunderling said:
update;
I have managed to unroot the phone but I cant seem to root it again......very strange.I have tried following this method http://forum.xda-developers.com/showthread.php?t=1501719 but there is a problem.
when I install the cwm zip(think its v5.8),I basically cant do anything in its menu.It only scrolls down once in the menu,then hangs/freezes.
Click to expand...
Click to collapse
How did you try to scroll, with volume up/down? If I am not mistake this CWM is a touch version
It was just the basic one.I've never seen recovery acting the way that version was doing.Out of the 6 options I could only scroll to 3 of them,and it wouldn't go near the other 3 options.
I eventually fixed the problem by trying combos with pressing the power and home buttons,and I think I got the other file in that link installed(the root).Then I stuck on siyah(c/w the touch recovery you said),which meant I could reinstall everything by the nand backup.
I can't remember if I got out of the other part of the recovery problem(verification) by getting the 2nd file from the internal memory and flashed that successfully.
Sent from my GT-I9100
Hi I want to install a custom rom on my mega since Touchwiz isn't that great. The last time I tried to root, I hard bricked. I'm too scared to try again so can any one tell me if I'm OK to root or shall I wait for new root kernel or something like that. I've done this kind of stuff on my old S2 and my Nexus 7 but I'm new to the way to Mega works, so can anyone tell me a link or tell me it's OK to root with my recently updated firmware. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9200 using Tapatalk
ianneo said:
Hi I want to install a custom rom on my mega since Touchwiz isn't that great. The last time I tried to root, I hard bricked. I'm too scared to try again so can any one tell me if I'm OK to root or shall I wait for new root kernel or something like that. I've done this kind of stuff on my old S2 and my Nexus 7 but I'm new to the way to Mega works, so can anyone tell me a link or tell me it's OK to root with my recently updated firmware. Thanks
Sent from my GT-I9200 using Tapatalk
Click to expand...
Click to collapse
Did you ever try Kingo Android Root as you install it on your pc and just follow the info in the program, it is easy to use and works very well on rooting many different models of Samsung phones.
You can't. You are running knox enabled firmware. You try to flash custom recovery, you'll brick again afaik.
Try this if you are bold.
http://forum.xda-developers.com/showthread.php?t=2574953
Oh okay do not root then as i didn't notice that the knox security is present, but i see now it is..sorry about that and thanks @Silesh.Nair for noticing that. :good:
@Silesh.Nair
I hate this new firmware GT I9200 XXUCNA5 XSE ( Indonesian ), any idea how to downgrade??? I still could use CWM to format/system and when finished flash XXUBMJ4 XSE and Secure FAIL : Kernel show up, then I flash again XXUCNA5 and back to normal again, and I flash CWM 6.0.3.2 and super su 1.93 and not busybox included, my factory app MAPS and YOUTUBE stop working and everytime I restart my I9200 at first on must wait until MAPS and YOUTUBE pop up UNFORTUNATELY ... HAS STOP WORKING, then I could use my device. This Real annoying, even I have disabled those things at application manager, my mind always being a terror that there were 2 app couldn't be used, just affraid I need them in the future.
Any Idea Silesh.Nair???
What's your reccomendation for CWM and Super SU???
I don't want to use CWM 6.0.4.7 coz a terrible interface and function, Now I still use CWM 6.0.3.2
I Really Regret for upgrading to XXUCNA5, if there's a way to rollback to XXUBMJ4, I will do it.
Thank You So Much Silesh.Nair
I don't think you can go back to any older firmware, not even a nandroid backup. Sorry man, I think you are stuck with it.
I am not an expert on knox, so I'll keep looking if there is a way out. I used the stock firmware only for 5 minutes after I got my phone. Its been custom roms all along.
---------- Post added at 10:25 PM ---------- Previous post was at 10:03 PM ----------
For your maps and YouTube issue, Valentel asks you to remove them from the system folder and then download from playstore.
Sent from my GT-I9205 using Tapatalk
Silesh.Nair said:
I don't think you can go back to any older firmware, not even a nandroid backup. Sorry man, I think you are stuck with it.
I am not an expert on knox, so I'll keep looking if there is a way out. I used the stock firmware only for 5 minutes after I got my phone. Its been custom roms all along.
Click to expand...
Click to collapse
As for now there is NO WAY to go back when one upgrade to KNOX-ed firmware. This is hardware driven thing, so forget... and enjoy your new shiny firmware with KNOX on behind... It's really pitty so that many people do not read nothing about theirs expensive phones before trying something unrecoverable, sometimes the very second day after purchasing... I will always try to help, but in this case there is nothing to do.
trurl3 said:
As for now there is NO WAY to go back when one upgrade to KNOX-ed firmware. This is hardware driven thing, so forget... and enjoy your new shiny firmware with KNOX on behind... It's really pitty so that many people do not read nothing about theirs expensive phones before trying something unrecoverable, sometimes the very second day after purchasing... I will always try to help, but in this case there is nothing to do.
Click to expand...
Click to collapse
Well, we're just going to have to wait for Kit Kat. Hurry up Samsung!
Sent from my GT-I9200 using Tapatalk
This is a question that I have always done: you can change the previous screen at boot (Splash Screen)? To be clear the screen that says: Samsung Galaxy S Advance GT-I9070 ... I'd love to change it but to do so I need to know that files change within the OS. Can you help me?
Come on guys, I'm still waiting ... My idea would be something like this (with hours and hours of hard work to finding the right font) =>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Luke_99 said:
Come on guys, I'm still waiting ... My idea would be something like this (with hours and hours of hard work to finding the right font) =>
Click to expand...
Click to collapse
Good luck, this is the guide:
http://forum.xda-developers.com/showthread.php?t=2676135
OMG
Hey luke
Are you gonna make it or not?
No @HazardDO I strongly advise against doing so. my s advance went bootloop and the only thing that worked was the download mode. Fortunately the download mode and thanks to odin3 I managed to reinstall the stock rom and then to return the device to normal. Do not do it! I feared the worst (maybe I bought the OnePlus3) but in the end I succeeded. Naturally without changing the splash screen .... I do not recommend to try.
i may try to do it, even if i don't own the phone anymore you can test it
I 'll spare you more than willingly again. I was too scared
Luke_99 said:
I 'll spare you more than willingly again. I was too scared
Click to expand...
Click to collapse
DON'T FLASH, IT DOESN'T WORK
ok Tomorrow or today i will make it.
Edit:
Here is the modded param, flash via the recovery
View attachment 3823311
if it doesn't work you can flash the stock one
View attachment 3823312
Good luck :highfive:
@Luke_99 you can flash it, it will not harm the device if it goes wrong and i'm here to help
bulgar said:
ok tomorrow or today i will make it.
Edit:
Here is the modded param, flash via the recovery
View attachment 3823311
if it doesn't work you can flash the stock one
View attachment 3823312
good luck :highfive:
@luke_99 you can flash it, it will not harm the device if it goes wrong and i'm here to help
Click to expand...
Click to collapse
it broke my phone ,, damnit !!
won`t boot into recovery either just a vibration and then blank screen waited for few minutes but nothing .. now booting into ODIN/DOWNLOAD mode to flash stock recovery ..
DaksAnkit said:
it broke my phone ,, damnit !!
won`t boot into recovery either just a vibration and then blank screen waited for few minutes but nothing .. now booting into ODIN/DOWNLOAD mode to flash stock recovery ..
Click to expand...
Click to collapse
oh then the param file in the guide, is wrong i followed the guide and it doesn't work dayum
Bulgar said:
oh then the param file in the guide, is wrong i followed the guide and it doesn't work dayum
Click to expand...
Click to collapse
Yep , it is ok man , you were just trying to help .
i had backed up most of the stuff so it was not much of a hassel .
:good:
DaksAnkit said:
Yep , it is ok man , you were just trying to help .
i had backed up most of the stuff so it was not much of a hassel .
:good:
Click to expand...
Click to collapse
:good: well played, well sorry guys but it doesn't work
haha
Bulgar said:
DON'T FLASH, IT DOESN'T WORK
ok Tomorrow or today i will make it.
Edit:
Here is the modded param, flash via the recovery
View attachment 3823311
if it doesn't work you can flash the stock one
View attachment 3823312
Good luck :highfive:
@Luke_99 you can flash it, it will not harm the device if it goes wrong and i'm here to help
Click to expand...
Click to collapse
Will not but will crash your phone yeah it cracked the thing was working was odin and congratulations the binary counter is increase.
I flashed it 2 days ago
Hi all,
Ive just created an account because for the last 2 days ive been trying to fix my bricked galaxy s6 edge and its driving me crazy. Hope you guys can help me out. Here are the stats:
Android version: 6.0.1.
Device type: SM-G925F
Stock Firmware
Rooted: Yes
Problem: cant enter recovery mode, unable to flash firmware
Cause: I was trying to get the Xposed installer on my phone. When I tried to install the framework the first time it bricked. I was able to get into recovery mode, whipe the phone and flash stock firmware through Odin. This solved the problem. The second time I tried to get TWRP on my phone. I used the TWRP app from the playstore. When the app rebooted my phone it bricked my phone but this time im unable to enter recovery mode. I can only access downloading mode. So ive tried to flash the stock firmware again but it gives me this error in Odin:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And the following line is displayed on my phone screen: [CM] SW REV. Check FAIL. DEVICE: 4, BINARY: 3
Ive also tried to flash the stock recovery. This is the error in Odin that I get:
And the following line is displayed on my phone screen: KERNEL REV. CHECK FAIL. DEVICE:2, BINARY:1
Im really stuck here guys so any help would be greatly appreciated.
I'd try the newest firmware first. If that doesn't work, you might need to flash the pit file to repartition then reinstall the stock firmware.
es0tericcha0s said:
I'd try the newest firmware first. If that doesn't work, you might need to flash the pit file to repartition then reinstall the stock firmware.
Click to expand...
Click to collapse
Thanks for the reply. I have tried the newest firmware. So now im looking into flashing the pit file but I dont know which one to use. These are the types I could find for my model number:
SM-G925F
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
My device just displays SM-G925F and nothing about "hidden". How do I know which one to use?
ZEROLTE_EUR_OPEN.pit
try this one
asadnow2k said:
ZEROLTE_EUR_OPEN.pit
try this one
Click to expand...
Click to collapse
Thanks. Ive tried all the pit files now and they all work. However, when I try to flash the firmware after that, it gives me the exact same error in Odin as shown in the image above =[
Anymore ideas?
What's the build number you are trying?
download and flash with those firmwares one by one
https://www.androidfilehost.com/?fid=24459283995310285
https://www.androidfilehost.com/?fid=24459283995310297
es0tericcha0s said:
What's the build number you are trying?
Click to expand...
Click to collapse
I do not know because I cant access the device anymore and have never written it down. I just now managed to get TWRP running =]
Can I somehow unbrick my device using TWRP?
asadnow2k said:
download and flash with those firmwares one by one
https://www.androidfilehost.com/?fid=24459283995310285
https://www.androidfilehost.com/?fid=24459283995310297
Click to expand...
Click to collapse
Thanks. Downloading and trying now.
asadnow2k said:
download and flash with those firmwares one by one
https://www.androidfilehost.com/?fid=24459283995310285
https://www.androidfilehost.com/?fid=24459283995310297
Click to expand...
Click to collapse
Tried both but getting this error:
]
Is there a way to use TWRP to fix this?
Edit firmware and remove sboot.bin and cm.bin then pack and write
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
or try www.samsung.com/us/smart-switch to flash ur phone
asadnow2k said:
Edit firmware and remove sboot.bin and cm.bin then pack and write
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
or try www.samsung.com/us/smart-switch to flash ur phone
Click to expand...
Click to collapse
Sorry for the noob question but what do I use to edit the firmware?
7zip would do the job google it ,
asadnow2k said:
7zip would do the job google it ,
Click to expand...
Click to collapse
Oke so ive managed to extract the files into a folder and removed the two files. But now I can only convert the folder into a .tar and not a .MD5 file. =z
misterpot said:
Oke so ive managed to extract the files into a folder and removed the two files. But now I can only convert the folder into a .tar and not a .MD5 file. =z
Click to expand...
Click to collapse
Odin flashes tar files too.
es0tericcha0s said:
Odin flashes tar files too.
Click to expand...
Click to collapse
Man I cannot catch a break. Got it into a .tar file and tried to flash. Error again:
asadnow2k said:
Edit firmware and remove sboot.bin and cm.bin then pack and write
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
or try www.samsung.com/us/smart-switch to flash ur phone
Click to expand...
Click to collapse
Guys I want to give a MASSIVE shout out to this guy. He helped me every night through Skype to solve my problem. He is an awesome dude and the world needs more people like him. Thank bro for helping me out the way you did!!!
misterpot said:
Guys I want to give a MASSIVE shout out to this guy. He helped me every night through Skype to solve my problem. He is an awesome dude and the world needs more people like him. Thank bro for helping me out the way you did!!!
Click to expand...
Click to collapse
Any clues as to what you did? I have the exact same problem as your last post where the load fails after hidden.img