Hi all,
Ive just created an account because for the last 2 days ive been trying to fix my bricked galaxy s6 edge and its driving me crazy. Hope you guys can help me out. Here are the stats:
Android version: 6.0.1.
Device type: SM-G925F
Stock Firmware
Rooted: Yes
Problem: cant enter recovery mode, unable to flash firmware
Cause: I was trying to get the Xposed installer on my phone. When I tried to install the framework the first time it bricked. I was able to get into recovery mode, whipe the phone and flash stock firmware through Odin. This solved the problem. The second time I tried to get TWRP on my phone. I used the TWRP app from the playstore. When the app rebooted my phone it bricked my phone but this time im unable to enter recovery mode. I can only access downloading mode. So ive tried to flash the stock firmware again but it gives me this error in Odin:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And the following line is displayed on my phone screen: [CM] SW REV. Check FAIL. DEVICE: 4, BINARY: 3
Ive also tried to flash the stock recovery. This is the error in Odin that I get:
And the following line is displayed on my phone screen: KERNEL REV. CHECK FAIL. DEVICE:2, BINARY:1
Im really stuck here guys so any help would be greatly appreciated.
I'd try the newest firmware first. If that doesn't work, you might need to flash the pit file to repartition then reinstall the stock firmware.
es0tericcha0s said:
I'd try the newest firmware first. If that doesn't work, you might need to flash the pit file to repartition then reinstall the stock firmware.
Click to expand...
Click to collapse
Thanks for the reply. I have tried the newest firmware. So now im looking into flashing the pit file but I dont know which one to use. These are the types I could find for my model number:
SM-G925F
ZEROLTE_EUR_OPEN.pit
ZEROLTE_EUR_OPEN_HIDDEN60M.pit
ZEROLTE_EUR_OPEN_HIDDEN100M.pit
ZEROLTE_EUR_OPEN_HIDDEN150M.pit
ZEROLTE_EUR_OPEN_HIDDEN200M.pit
ZEROLTE_EUR_OPEN_HIDDEN240M.pit
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
My device just displays SM-G925F and nothing about "hidden". How do I know which one to use?
ZEROLTE_EUR_OPEN.pit
try this one
asadnow2k said:
ZEROLTE_EUR_OPEN.pit
try this one
Click to expand...
Click to collapse
Thanks. Ive tried all the pit files now and they all work. However, when I try to flash the firmware after that, it gives me the exact same error in Odin as shown in the image above =[
Anymore ideas?
What's the build number you are trying?
download and flash with those firmwares one by one
https://www.androidfilehost.com/?fid=24459283995310285
https://www.androidfilehost.com/?fid=24459283995310297
es0tericcha0s said:
What's the build number you are trying?
Click to expand...
Click to collapse
I do not know because I cant access the device anymore and have never written it down. I just now managed to get TWRP running =]
Can I somehow unbrick my device using TWRP?
asadnow2k said:
download and flash with those firmwares one by one
https://www.androidfilehost.com/?fid=24459283995310285
https://www.androidfilehost.com/?fid=24459283995310297
Click to expand...
Click to collapse
Thanks. Downloading and trying now.
asadnow2k said:
download and flash with those firmwares one by one
https://www.androidfilehost.com/?fid=24459283995310285
https://www.androidfilehost.com/?fid=24459283995310297
Click to expand...
Click to collapse
Tried both but getting this error:
]
Is there a way to use TWRP to fix this?
Edit firmware and remove sboot.bin and cm.bin then pack and write
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
or try www.samsung.com/us/smart-switch to flash ur phone
asadnow2k said:
Edit firmware and remove sboot.bin and cm.bin then pack and write
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
or try www.samsung.com/us/smart-switch to flash ur phone
Click to expand...
Click to collapse
Sorry for the noob question but what do I use to edit the firmware?
7zip would do the job google it ,
asadnow2k said:
7zip would do the job google it ,
Click to expand...
Click to collapse
Oke so ive managed to extract the files into a folder and removed the two files. But now I can only convert the folder into a .tar and not a .MD5 file. =z
misterpot said:
Oke so ive managed to extract the files into a folder and removed the two files. But now I can only convert the folder into a .tar and not a .MD5 file. =z
Click to expand...
Click to collapse
Odin flashes tar files too.
es0tericcha0s said:
Odin flashes tar files too.
Click to expand...
Click to collapse
Man I cannot catch a break. Got it into a .tar file and tried to flash. Error again:
asadnow2k said:
Edit firmware and remove sboot.bin and cm.bin then pack and write
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
or try www.samsung.com/us/smart-switch to flash ur phone
Click to expand...
Click to collapse
Guys I want to give a MASSIVE shout out to this guy. He helped me every night through Skype to solve my problem. He is an awesome dude and the world needs more people like him. Thank bro for helping me out the way you did!!!
misterpot said:
Guys I want to give a MASSIVE shout out to this guy. He helped me every night through Skype to solve my problem. He is an awesome dude and the world needs more people like him. Thank bro for helping me out the way you did!!!
Click to expand...
Click to collapse
Any clues as to what you did? I have the exact same problem as your last post where the load fails after hidden.img
Related
It's a version from HongKong,I make it to ".ftf" file but can't flash it with flashtool,someone flash it with Setools and make a back up files,now I upload it both the ".sin file" and the back up files,maybe some of you can make a .ftf file.
I can't flash the new basebond and use the old one.
sorry for my poor English
mirror:http://lwmssys.minus.com/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Works and looks Real! I use that Clockwork Backup to Install.
I could make a .ftf file but its not possible to update the Baseband. If i try that with your files i get a Error in Flashtool.
ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="SIN_HEAD_VER";ERR_DYNAMIC="Failed to verify sin header";
Baseband 64 or 66 is working but a new one i don't know..
tried extracting system.sin using SIN2IMG seems ok but cannot extract the .img file... seems to be corrupted?
DrearierJester1 said:
tried extracting system.sin using SIN2IMG seems ok but cannot extract the .img file... seems to be corrupted?
Click to expand...
Click to collapse
use attachments to extract it
View attachment unyaffs.zip
try flashing kernel.sin,system.sin and userdata.sin with fastboot
流大虾！
humza123 said:
try flashing kernel.sin,system.sin and userdata.sin with fastboot
Click to expand...
Click to collapse
i believe you cannot flash .sin files using fastboot, only .img files ...
---------- Post added at 10:17 PM ---------- Previous post was at 10:16 PM ----------
流我梦觞 said:
use attachments to extract it
View attachment 992391
Click to expand...
Click to collapse
i have that file on SiN2IMG, still not working, perhaps these files were encrypted properly for us not to decrypt easily.
DrearierJester1 said:
i believe you cannot flash .sin files using fastboot, only .img files ...
---------- Post added at 10:17 PM ---------- Previous post was at 10:16 PM ----------
i have that file on SiN2IMG, still not working, perhaps these files were encrypted properly for us not to decrypt easily.
Click to expand...
Click to collapse
It's not the same,just have a try.It really can extract system.img
Some screen shot for sharing...
It works using Sirkay's kernell, but just wonder why the Kuala Lumpur time is +7.5 GMT
This version of Rom looks similar like the old ICS Beta? I think its better we wait for a Final Version! Maybe 4.0.4?
just tested gps works now wasn't workin with ka12
but its weird that timescape aint been updated ( no timescape feed )
Ammadon said:
This version of Rom looks similar like the old ICS Beta? I think its better we wait for a Final Version! Maybe 4.0.4?
Click to expand...
Click to collapse
Sony give for the user just 4.0.3 yet. Maybe later come the 4.0.4 FW.
muz2000 said:
Some screen shot for sharing...
It works using Sirkay's kernell, but just wonder why the Kuala Lumpur time is +7.5 GMT
Click to expand...
Click to collapse
How do you flash the rom ?
I did create bundle in flashtool but i get an error all the time when i flash it
i think is not final version because
alpha SE 4.0.2
BETA SE 4.0.3
Final SE 4.0.4 ?
mregeling said:
How do you flash the rom ?
I did create bundle in flashtool but i get an error all the time when i flash it
Click to expand...
Click to collapse
I download this version http://i.minus.com/1334062014/p0SdJxIx_ehWhJQRSUEsYg/dbbovJNtf7c29L.zip and use CWM restore.
It's most likely the final release. Can't wait for it
sent from my white ray using XDA App
muz2000 said:
I download this version http://i.minus.com/1334062014/p0SdJxIx_ehWhJQRSUEsYg/dbbovJNtf7c29L.zip and use CWM restore.
Click to expand...
Click to collapse
how do you download on this site?nothing happens when i click download
Edit : got it when i clicked Download all as Zip, but the site went down suddenly, i reached up to 80% only.
19alchemist78 said:
how do you download on this site?nothing happens when i click download
Edit : got it when i clicked Download all as Zip, but the site went down suddenly, i reached up to 80% only.
Click to expand...
Click to collapse
I also can't download it. Says it's not there no more :-(
EDIT: Can someone please upload it to another site? A thanks will be given
Sent from my Xperia Ray using xda premium
I downloaded it last nyt and tried it... I think its better than that the beta version. I used cwm to restore and it works. I used to play where's my water with swappy appearing as blocks of white and the crocodile couldnt be seen with the beta version.. Now, i can seen swappy everytime i play with it with this version. I hope someone noticed it also.
i can't upload system folder or update.zip because poor internet .
although you can use aIUP to extract system.sin
aiup.exe system.sin 4096 system
Click to expand...
Click to collapse
and parse "system folder" to update template and flash with CWM.
aIUP.zip http://www.mediafire.com/?95ig104uyevyl1l
update_zip_template.zip http://www.mediafire.com/?8aevehwv1t4ua4p
thank @szl.kiev and aZuZu Small Tools 4 SE
http://forum.xda-developers.com/showpost.php?p=23053506&postcount=66
p.s
for missing wifi replace "wl1271-nvs.bin" to "\system\etc\firmware\ti-connectivity"
"wl1271-nvs.bin" http://www.mediafire.com/?0bksa9lmxbku150
I have a small problem that I hope some one can help me on? I get this message on boot up
KERNEL IS NOT SEANDROID ENFORCING
If you could direct me to it I would be greatful.
claude9039u said:
I have a small problem that I hope some one can help me on? I get this message on boot up
KERNEL IS NOT SEANDROID ENFORCING
Click to expand...
Click to collapse
You flashed a kernel that turned of SELinux, it's pretty self explanatory.
Sent from my SM-N900P using Tapatalk
But how can I fix it?
(have same problem on my i9505)
Mark
It's just a warning message, there is nothing problematic about it.
However, the solution would be to flash a stock kernel:
http://samsung-updates.com/details/14398/Galaxy_Note_3_Sprint/SM-N900P/SPR/N900PVPUBMI3.html
Tekara said:
It's just a warning message, there is nothing problematic about it.
However, the solution would be to flash a stock kernel:
http://samsung-updates.com/details/14398/Galaxy_Note_3_Sprint/SM-N900P/SPR/N900PVPUBMI3.html
Click to expand...
Click to collapse
thx dude. I had the same problem.. after i flashed ABYSS kernel. Even now i was doing clean rom install but the kernel it is still there. (and the note). But is seems like good kernel, and if you says "nothing problematic about it" im gonna keep it little while
Tekara said:
It's just a warning message, there is nothing problematic about it.
However, the solution would be to flash a stock kernel:
http://samsung-updates.com/details/14398/Galaxy_Note_3_Sprint/SM-N900P/SPR/N900PVPUBMI3.html
Click to expand...
Click to collapse
how to flash stock ROM ?
Simonka said:
how to flash stock ROM ?
Click to expand...
Click to collapse
Stock firmware you flash with Odin
theresident said:
Stock firmware you flash with Odin
Click to expand...
Click to collapse
it failed on me
Did you put on PDA and are you sure that you got the firmwate for your phone?... Odin cant fail....
theresident said:
Did you put on PDA and are you sure that you got the firmwate for your phone?... Odin cant fail....
Click to expand...
Click to collapse
i downloaded mine STOCK 3UK ROM official I unrared file that it will be .tar then i opened odin choosed PDA picked N9005XXUDMJ6_N9005H3GDMJ2_N9005XXUDMJ4_HOME.tar.md5
hit start it said please wait and then FAILED
If you got odin 3.09 try with AP option ..
theresident said:
If you got odin 3.09 try with AP option ..
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And your phone is in Download Mode ?
I dont get it...
---------- Post added at 12:45 AM ---------- Previous post was at 12:40 AM ----------
theresident said:
And your phone is in Download Mode ?
I dont get it...
Click to expand...
Click to collapse
pleeeasee. stop asking like am idiot
Try with diferent firmware for your phone
Simonka said:
---------- Post added at 12:45 AM ---------- Previous post was at 12:40 AM ----------
pleeeasee. stop asking like am idiot
Click to expand...
Click to collapse
dude i dont want to hurt your bubble this happen to me too.
as of right now u cant knox has kicked in yo phone and left in other words a watermark that says kernel not seandriod enforcing. im pretty sure a dev will have a workaround on it.If you have to return your phone try to find a stock rooted rom and hit super su and hit setting and scroll all the way down and hit full unroot. it will unroot but the watermark will still be there.
Something isn't jiving here, you are in the Sprint forums and yet it looks like you are attempting to flash 9005 (not sprint) firmware. If you do have a Sprint phone, you need to be flashing 900P firmware.
Sprint Note 3 firmware: http://samsung-updates.com/device/?id=SM-N900P
DjMizzTikk said:
dude i dont want to hurt your bubble this happen to me too.
as of right now u cant knox has kicked in yo phone and left in other words a watermark that says kernel not seandriod enforcing. im pretty sure a dev will have a workaround on it.If you have to return your phone try to find a stock rooted rom and hit super su and hit setting and scroll all the way down and hit full unroot. it will unroot but the watermark will still be there.
Click to expand...
Click to collapse
are u sure? so even we already made it back to official Fmw without root mdofication.. just the real stock.. the watermarks still there? that awful.. so maybe ill stay in my cusrom then
ZachariasErsa said:
are u sure? so even we already made it back to official Fmw without root mdofication.. just the real stock.. the watermarks still there? that awful.. so maybe ill stay in my cusrom then
Click to expand...
Click to collapse
Once you flash the stock kernel back on there it goes away, I've done it on my phone multiple times while testing kernels.
Hi Hi, First you, you are amazing ... do not understand how you can have so much knowledge about this.
Well I tell you my problem that I have spent one week in and I can not resurrect.
I stayed on the phone with samsung logo and did nothing mas..le install a room and before I came to end in the odin..ahora only fail I get a screen with a water blank and I can not put him any rom always gives me fail've tried everything and no result. Will help me I would appreciate. from already thank you to everyone s.
In product Name GT-I9300 I get as I have seen here the phone is not dead if it goes ... no?
I can also tell you that going into Downloading mode.
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
get Image Capture to see my screen as it has been
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you
first of all
-were you successful flashing the rom via odin and got a pass sign in green color on odin
-which version of rom are you trying to flash.
jasi275 said:
first of all
-were you successful flashing the rom via odin and got a pass sign in green color on odin
-which version of rom are you trying to flash.
Click to expand...
Click to collapse
Hi Thanks for answering.
I have proven with many Roms and always leaves me FAIL in Odin
I have also tried pit.
And whenever I get FAIL in Odin.
I have proven all Odin and I always get the same. FAIL
do you have kies on your pc if not install it, it will install proper drivers for s3 then odin might start working and one more thing odin only works if your phone is on download mode and the added is written
jasi275 said:
do you have kies on your pc if not install it, it will install proper drivers for s3 then odin might start working and one more thing odin only works if your phone is on download mode and the added is written
Click to expand...
Click to collapse
If you have Kies on the PC does not detect the phone.
if you always put the phone in download mode to connect to Odin
Odin if it detects the phone but always comes FAIL
extract the zip file see see if it is corrupted or use different version of odin like latest or old one
jasi275 said:
extract the zip file see see if it is corrupted or use different version of odin like latest or old one
Click to expand...
Click to collapse
The zip file where?
I have proven with all versions of Odin
mensajero2 said:
The zip file where?
I have proven with all versions of Odin
Click to expand...
Click to collapse
you do have a firmware file don't you the stock android .tar file which is used to flash the firmware via odin extract that
jasi275 said:
you do have a firmware file don't you the stock android .tar file which is used to flash the firmware via odin extract that
Click to expand...
Click to collapse
the S3 samsung firmware I have tried them all and does nothing.
Odin goes into FAIL
are you files in zip format or .tar format you do not get added sign in odin when you put your s3 in download mode is that right
jasi275 said:
are you files in zip format or .tar format you do not get added sign in odin when you put your s3 in download mode is that right
Click to expand...
Click to collapse
The Odin works as the problem is not always grabs any ROM out FAIL.
http://forum.xda-developers.com/galaxy-s3/help/samsung-i9300-flash-odin-error-t1842728 see this thread do you have a problem like this
mensajero2 said:
The Odin works as the problem is not always grabs any ROM out FAIL.
Click to expand...
Click to collapse
You cannot fix this with a software fix this is emmc failure you need a service center see this post >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << and the many other posts with same problem.
Mod Edit links removed
so how the step
Can't open any samsung-updates.ru link, is the site down or something? Where else can I find my device (J500M UD [Mexico]) firmware?
JH97 said:
Can't open any samsung-updates.ru link, is the site down or something? Where else can I find my device (J500M UD [Mexico]) firmware?
Click to expand...
Click to collapse
sammobile.com/firmwares?
Galaxy J5 (2016) firmware online, should launch in Europe and other markets soon
I downloaded my firmware from sammobile.com, it doesn't install the russain things like the links above do,
But I am a noob so i would just like to know is there anyway to verify if the download is working and is there no MD5 and SHA Checksum Utility code for it like there is for a custom rom? And one last question what is the difference between XFE and XFA? I know XFV is Vodacom.
reus11 said:
I downloaded my firmware from sammobile.com, it doesn't install the russain things like the links above do,
But I am a noob so i would just like to know is there anyway to verify if the download is working and is there no MD5 and SHA Checksum Utility code for it like there is for a custom rom? And one last question what is the difference between XFE and XFA? I know XFV is Vodacom.
Click to expand...
Click to collapse
Hi,
Not sure the difference between XFA & XFE; there really was none that I could see. I have installed both those versions before, as well as United Emirates, Russian, Iraq etc. versions , and they all worked on the South African network (Vodacom). Some just have extra user apps, and newer modems for the phone eg. L1, L2, PB2...
Hey Friends,
can anyone give me download link to CM12 for this device?
Greets Mark
Need Pit file
Hi !
Please help me ! I need pit file for J500FN. After flashing soft with Odin phone restarts to Recovery and have multiple red information "Can't mount", "Can't open" etc.
Something like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here u R.. just created from my J500FN
So I have a big problem.I flashed twrp recovery on my galaxy J500FN and now I am stuck on recovery.I know flashing stock with kies should fix it,but is there a way to fix it without losing twrp because I would like to have custom recovery.I have tried many things,but when I boot,it always goes to recovery.:crying:
Please help a n00b
Thanks.
Happonee said:
So I have a big problem.I flashed twrp recovery on my galaxy J500FN and now I am stuck on recovery.I know flashing stock with kies should fix it,but is there a way to fix it without losing twrp because I would like to have custom recovery.I have tried many things,but when I boot,it always goes to recovery.:crying:
Please help a n00b
Thanks.
Click to expand...
Click to collapse
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
jdstrydom said:
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
Click to expand...
Click to collapse
I am not sure.I try to flash v3 now.
---------- Post added at 04:11 PM ---------- Previous post was at 03:54 PM ----------
jdstrydom said:
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
Click to expand...
Click to collapse
I flashed v3 and now it works!Thank you for helping
(sorry for being n00b)
Hello guys, so im stucked on bootlogo(bootlooped) where i've just flashed the xposed-v72-sdk22-arm.zip and when i started to reboot my phone, it suddenly happened. Hoping that someone could help me out with this. and btw, if ever i wanted to flash for another stock firmware which i am at, do i still need to delete my system,data,cache something like that before flashing the new firmware? Thanks and more power xda developers.! *cheers*
i thought this, too. right after plashing xposed, but the first bootup just needed 10-15min.. weird
I need a ROM Persian language j5008
please help
Hi, just wondering wich one this is
LMY48B.J5000FNXXUAOJ2, found several J2 versions but dunno wich one.
Have tried to Google it.
Regards Jonny
Hi guys,
Do you know if firmware with FRENCH exists ?? If yes, can you give me the product code ? Thx !
Br
gelmarkliao said:
Hello guys, so im stucked on bootlogo(bootlooped) where i've just flashed the xposed-v72-sdk22-arm.zip and when i started to reboot my phone, it suddenly happened. Hoping that someone could help me out with this. and btw, if ever i wanted to flash for another stock firmware which i am at, do i still need to delete my system,data,cache something like that before flashing the new firmware? Thanks and more power xda developers.! *cheers*
Click to expand...
Click to collapse
Don't worry, I have had that problem too many times too. It's very easy.
First of all, flash xposed Uninstaller file.
Next, it is possible you lost root in the process. Use chainfire root method to reroot the phone. Now flash twrp 3.0.0 to get a custom recovery. After that, download xposed framework v79. 1 (custom built by wanam for Samsung lollipop devices). Don't download any other version but v79. 1. I have noticed that my j500f only supports xposed v79.1 and it works fine. There is no need to flash the stock rom again. Just reroot and flash twrp. Then flash xposed v79. 1. Alternate way that I have flashed xposed is using Flashfire application. It works way too well. Give it a try. It's a beast of an application.
Goodluck!
Sent from my SM-J500F using XDA-Developers mobile app
I have a Galaxy Note 7 Korea ( N930S/L/K ) . Yesterday I made the crazy idea of loading the Galaxy Note FE ( N935S/L/K) software into it. In the end it gives me this result :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Come here, I can not do anything. I also can not go back to the software version of Galaxy Note 7. I can honestly understand that my machine is locked and can not do anything anymore.
:crying: :crying: :crying: :crying:
But fortunately for me. I got help and got a file named Sboot.bin. It helped me get over that Korean word. But it does not help me start the machine completely.
This is the download link of the Sboot file : Sboot
People just load it down and load via odin
Here I can go back to download mode. But there is nothing else to do. I would like to share with you, so that everyone can study how to save this machine with me as well as other machines that are like me.
where did u got this sboot? it is loaded with new bootloader (N930LKLU3AQG7), so u need the original firmware of it. if u find this firmware (LU3AQG7), you can fix ur problem.
zohawkish said:
where did u got this sboot? it is loaded with new bootloader (N930LKLU3AQG7), so u need the original firmware of it. if u find this firmware (LU3AQG7), you can fix ur problem.
Click to expand...
Click to collapse
The sboot file is extracted from the combination. Even if there are enough sets, there is nothing to do. Because when the loaded file has been modified it is blocked
minhcanh97 said:
The sboot file is extracted from the combination. Even if there are enough sets, there is nothing to do. Because when the loaded file has been modified it is blocked
Click to expand...
Click to collapse
Link of file.
ASV TBL VER = 10
ASV TBL VER2 = 0
NAD : Watch DOG DETECTED
RPMB provisioned
it appear at the top of the screen after i flash the sboot.bin good thing about this is the phone can now go into download mode but, if u try to flash the original note 7 firmware it will be block still...
Try twrp
zohawkish said:
Link of file.
Click to expand...
Click to collapse
I do not have . I just got this sboot file
Carlo25ph said:
ASV TBL VER = 10
ASV TBL VER2 = 0
NAD : Watch DOG DETECTED
RPMB provisioned
it appear at the top of the screen after i flash the sboot.bin good thing about this is the phone can now go into download mode but, if u try to flash the original note 7 firmware it will be block still...
Click to expand...
Click to collapse
That is exactly what I mean
minhcanh97 said:
I do not have . I just got this sboot file
Click to expand...
Click to collapse
where
zohawkish said:
where
Click to expand...
Click to collapse
I do not know nor own it
minhcanh97 said:
I do not know nor own it
Click to expand...
Click to collapse
? i think you must remember to recover your device.
zohawkish said:
i think you must remember to recover your device.
Click to expand...
Click to collapse
lol he already have link the sboot.bin file pls check his /her first post and look for sboot in the link provided
Carlo25ph said:
lol he already have link the sboot.bin file pls check his /her first post and look for sboot in the link provided
Click to expand...
Click to collapse
I'm talking about the whole firmware . He has a frp lock.
I find this firmware N930SKSU2BPL2, on this website http://hoj.cn/forum.php?mod=viewthread&tid=3410&highlight=N930s
It should fix the problem of frp lock. But it need a code registration. If someone can register in forum and share the build?
translpro said:
I find this firmware N930SKSU2BPL2, on this website http://hoj.cn/forum.php?mod=viewthread&tid=3410&highlight=N930s
It should fix the problem of frp lock. But it need a code registration. If someone can register in forum and share the build?
Click to expand...
Click to collapse
I have it but it does not really help because it is lower than the current version loaded into the machine.
minhcanh97 said:
I have it but it does not really help because it is lower than the current version loaded into the machine.
Click to expand...
Click to collapse
can u share it please?
No sharing :crying:
minhcanh97 said:
I have a Galaxy Note 7 Korea ( N930S/L/K ) . Yesterday I made the crazy idea of loading the Galaxy Note FE ( N935S/L/K) software into it. In the end it gives me this result :
Come here, I can not do anything. I also can not go back to the software version of Galaxy Note 7. I can honestly understand that my machine is locked and can not do anything anymore.
:crying: :crying: :crying: :crying:
But fortunately for me. I got help and got a file named Sboot.bin. It helped me get over that Korean word. But it does not help me start the machine completely.
This is the download link of the Sboot file : Sboot
People just load it down and load via odin
Here I can go back to download mode. But there is nothing else to do. I would like to share with you, so that everyone can study how to save this machine with me as well as other machines that are like me.
Click to expand...
Click to collapse
What ever this Sboot is, it saved me.. THANK YOU!
youngkim68 said:
What ever this Sboot is, it saved me.. THANK YOU!
Click to expand...
Click to collapse
How? Did u have the firmware?
Has your cell phone recovered?
Has your cell phone recovered?