Hi guys I would like to have an information if it 'possible ... this morning I flashed a rom that was supposed to go on the device in question .. but at some point during the flash the rom via TWR "TeamWinRecovery" my smartphone fallen and the battery jumped out .. now the phone is not broken but will not start ... with the power button does not turn on .. and even enters into recovery via volume up + power ... if I connect the usb i see an red LED .. and finds the preload drivers etc but always disconnects after 2 sec .. can you tell me which 'the problem? and if it 'repairable? thanks in advance! Sorry for my bad english
My smartphone: Mtk6577 Brondi Glory ROM: All imo s88 work great.
Related
Hello everybody
i've a big problem...my hd2 can't power up/boot up ... i were having a boot stuck at HTC logo i tried to flash an official rom via usb by pressing the volume down key so i turn into bootloader (red.green.yellow) ... when its start to flash it's freeze at 9% and say this rom is not suitable for ur device.... i tried two official rom the 2se was working on my hd2 ... but it's also stuck at 8% ... so i take the battery out and tried to power up but nothing happen no power... i though power is down so i tried to put it into the charge...and i found that is not charging no led nothing... i tried also by usb charging and it's also not charging beside no led...
what should i do ... please help me ?
t mobile us phone? (tmous)
what rom? full filename please.
Phone product Middle east
Rom filename is official: -HTC HD2-RUU_Leo_HTC_ARA_1.66.415.3_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Would u help ... is there any idea ?
silent_fear said:
Hello everybody
i've a big problem...my hd2 can't power up/boot up ... i were having a boot stuck at HTC logo i tried to flash an official rom via usb by pressing the volume down key so i turn into bootloader (red.green.yellow) ... when its start to flash it's freeze at 9% and say this rom is not suitable for ur device.... i tried two official rom the 2se was working on my hd2 ... but it's also stuck at 8% ... so i take the battery out and tried to power up but nothing happen no power... i though power is down so i tried to put it into the charge...and i found that is not charging no led nothing... i tried also by usb charging and it's also not charging beside no led...
what should i do ... please help me ?
Click to expand...
Click to collapse
Ugh
Stuff like this makes my stomach turn
I was always soooooo scared the first time I flashed a ROM. Everybody's worst nightmare come to life...
Hi
Am a former galaxy s2 user . I know how root , flash , put a costume or uncostume rom , or even make one
But that I dont do anymore
Because I saw xperia s . Liked it . Bought it
It's my first sony/se android phone to have
To unlock bootloader . U have to be in fastboot mode . To be there
I turned of device . Held volume up + power botton + pluged the cabla ( usb )
the device always flash's a blue light then turn to green and show the charging animation
My q is how to be in fastboot mode ?
And I already have the ( B . L ) code !
And using win7 !
I looked alot but never seen a video on how to be in fastboot . Or to root the device
Thank u for ur help if u provide it
Which am sure u will
You must to use search button
Look at the end of the first post,the video is about arc but the steps are the same!
http://forum.xda-developers.com/showthread.php?t=1527159
Best regards
Alex
Hi,
can someone help me? I have brick my Goophone i5S, MTK6572, 512MB when i have tried to Backup the ROM with the MTK Droid Root Tool. Now it dosen´t work anymore.
Phone:
i bought the phone by dhgate.com (efit)
I have tried to Flash this ROM:
goophone-i5s-2 ROM from needrom
But it dosen´t work and i get this error SP FLASH TOOL ERROR: (8038)
i have attached the logfile.
i hope someone can help me
I can help if I can make a backup of my rom but don't know how to download the files to put in a zip file. any help and I can help you?
I have a i5s in white with the same CPU and RAM.
hi, i just had the same thing. it's not actually bricked from simply backing up. you can press home + volume up + power to enter recovery. then press power again to bring up the android system recovery menu, then make sure reboot system now is highlighted (is the first option and should be highlighted by default), press the volume up key to perform this action.
andrew81 said:
hi, i just had the same thing. it's not actually bricked from simply backing up. you can press home + volume up + power to enter recovery. then press power again to bring up the android system recovery menu, then make sure reboot system now is highlighted (is the first option and should be highlighted by default), press the volume up key to perform this action.
Click to expand...
Click to collapse
My I5S doesn't boot anymore, too.
I have tried to flash a newer Stockrom but it bricked my phone.
It still gets recognized from the Flshtool but I don't have a suitable Rom for my phone.
I have the same problem, I tried to update it and the phone is bricked.
Someone has a stock rom?
mtk 6572 512mb goophone i5s v1 (not v2) new model
Also looking for ROM: Goophone i5S MTK6572 512 MB Ram (goophone.cc)
Hi at all,
Yesterday I flashed the Rom (needrom website - goophone I5s 1gb version) the Rom worked a while then the battery gone empty since then the phone won't start any more.
I tried the delivered usb cable and an other no name cable ... Both don't work. What can I do to boot / load my goophone again?
If someone should have a solution for my loading problem:
Can someone please post a link to the original stock Rom?
Is there the possibility to flash a Rom with working softkeys for the back button?
The code "qemu.hw.mainkeys=0" didn't work
PLEASE HELP ME!!!!
Just try to press power+home button for 25/30 Seconds
this smartphone is very hard to understand.. usually when the smartphone go an preloader mode.. the battery starts to drain...
i think you have to connect the smartphone to a powersupply (not a PC) for 10 minutes.. and the try the POWER+HOME for 25 secs.
I have a custom rom for this phone. Pm me if you are interested.
I am also facing this type of problem ...,
Unfortunately I increase the ram by ram expander and after a reboot I see a message on screen is that phone storage is full application has been stopped please free some space . then I continues clicking on OK but it don't go from screen and then I deleted my last launcher from the phone so the screen becomes black ...what to do
Please help me
Please
can someone help me? I have brick my Goophone i5S, MTK6572, 512MB when i have tried to start up my phone again Now it dosen´t work anymore.
Phone:
i bought the phone by dhgate.com
I have tried to Flash this ROM:
goophone-i5s-2 ROM to new from needrom
But it dosen´t work and i get this error SP FLASH TOOL Error 3144
hello!
I have a reply of the note 3 specifications are in the picture, good in a procedure happened in the BRICK device now he only comes on the screen , pressing power and volume - nothing happens , power and volume + appear three options that do not work , using SP_Flash_Tool_v5.1348.00 program and only selecting the file RECOVERY time I log in CWM but I can not put any rom ,
someone with more experience could help me ?
Please! someone help me?
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Under World said:
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Click to expand...
Click to collapse
TRY
Code:
adb reboot bootloader
command
Under World said:
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Click to expand...
Click to collapse
You can try that but cant guarantee . No one else tried before
Under World said:
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Click to expand...
Click to collapse
I hope that dint worked for u as u dint replied for this thread since.. kindly get the power button replaced instead of messing with board.