HI CAN ANY ONE PROVIDE Archos 97 Titanium HD ORIGINAL RECOVERY IMAGE
I FOUND THIS BUT ROCKCHIP TOOL NOT ACCEPT THIS FORMAT
http://www.archos.com/support/support_tech/updates_fwm.html?country=us&lang=en
SECOND I FOUND BUT AFTER INSTALL TABLET TOUCH NOT WORK
http://www.arctablet.com/blog/downl...ed_visture_v5hd_97r_20130412-411-rooted3.zip/
ANY HELP
Related
Hi ,
I use an Archos 80 Gen9 for less than a year, I've switch to 80XS for the white colour and Android Jellybean, the Archos 80XS is based on a Rockchip 3066 so it's not able to root or make a custom firmware easier like the 101xs.
I've tried to root the tablet with RKTool like an archos 97 cobalt but it's not possible because I don't have a file like "update.img" so I'm searching for extract the firmware of the tablet...
The file isn't on a website of Archos and nothing else on other website like arctablet, jbmm ...
For The ClockWorkMod... Same Way, after flash the Recovery and the kernel for be able to CWM with the Volume + and Power, have a blackscreen.
I have one question :
Have you an idea for extract the firmware 4.1.1? for make a custom update.img with root privilege and busybox.
Vinksan.
Hi everyone,
My Ug007 android TV just went into boot loop and after lots of research on the web I found that the only solution to this problem is to flash a new ROM into it using Rockchip Batch Tool. The problem is that all the Ug007 ROMs I've found are in the form of updateXXX.zip format and Rockchip Batch Tools is asking me to provide and update.img file instead.
I don't know the difference between the updateXXX.zip and the update.img formats. I would really appreciate if someone can explain me the difference and tell me where to get .img ROMs for Ug007.
Thanks in advance.
PS: I cannot post links, that's why I don't include the link to Rockchip Batch Tool
Hi all,
I need your help with the following tablet 9" GT90H with Allview A23 CPU/ chipset and android 4.2. I want to backup the ROM, to perform few modifications and to upload the modified image to the tablet, but I am stuck on the first phase (cannot dump the rom).
I tried several ways to do it (actually that I found) to dump/ backup the stock ROM but I was stuck on all of them. First I tried using the clockwork way, but unfortunately my tablet is not supported (and I could not find supported MOD). Then I tried with romdump, but unfortunately I was stuck because the tablet does not have /proc/mnt file. Finally I found a way using the rkdump method but I had non recognize image error (although I am not sure if I found the correct partition to back up - /dev/block/by-name/recovery ). I have doubts if this is the correct partition, because I did a binary copy using dd to a file, which ended up with size around 32 MB (which I found too small for a recovery image).
So that is why I decided to seek help from more advance users (this is my first tablet, and first android experience) and I believe this forum is the right place for that.
My first request is could someone guide how to make a proper ROM backup, that I would be able to restore later?
In addition I want to ask is it possible, once I backed up the ROM, to modify for example the home page (because on the current ROM the home page for all browsers that I install is http://www.baidu.com)?
Moreover I would like to to install the ROM on external memory card and to run the tablet from there (because the internal memory of this table is too low - 8GB but for the system partition I have only 500 mb, which are all occupied with pre installed software). Is this something that I can achieve (android as far as I know is *unix system, and in theory this should be possible)?
Thank you in advance.
For increase space you can use Terminal Emulator for market and must have root on tablet.
Open terminal , and run the commands :
pm get-install-location (this will show you where apps are installing in this moment)
Auto device install is 0 (the tablet chose auto where to install apps,usuale is chosing to internal memory,your 500mb )
internal memory is 1 (Tablet memory - your 500mb )
External memory is 2 this is where you want to instal apps - (your 8GB )
After run the comand and see the sistem is set to AUTO (0) you will run this :
pm set-install-location 2 - This will force apps to instal in your 8gb
to check if is ok , run again : pm-get-install-location
exit terminal emulator
Good luck ! Hope it help you
Problem with my GT90H
Hey Guys,
I have a Problem with my GT90H. It stops to boot at the screen: Tablet PC - Keep Moving Forward.
If i go in the recovery mode. I can reboot the system, but it stops at the same screen like I explained in my first sentence.
The Factory Reset doesn't work. So I read in some communitys that Tablets can be flashed with a new ROM (Android System) over the USB Port from the Computer.
So can anybody send me the Android 4.2.2 Image for my GT90H ?
It's very important. So thanks.
Thanks for your help.
Greetings from
TheGuardianTX
Hi,
so now I have an Firmware as an Image-File at my computer, but I don't know how I can flash my tablet via ADB.
So can someone help me ?
Thanks a lot.
Greetings
TheGuardianTX
I'm badly need some expert advise.
.My china clone without name (rockchip-rk31sdk-WAWJMDN1KN).I decide to go ahead and try some custom rom using RKAndroidTool.
I did not realize that by cleaning IDB I will low level format..Before doing that I did save few pictures and run log via "android studio" also I backup whole unit via CWM hoping I will always have access to recovery.Unfortunately that not the case.The good think I still have access to RKAndroidTool( the tool is recognizing my device).There is the link to my CWM backup if may help
https://mega.nz/#!g8YgVKaa!209scxKfT...lRZ454peCCCsgU
https://mega.nz/#!gwRGhC7B!KFvTGpp4x...M2AHOKjT43VPQI
Inside that CWM backup is kernel.bin, system.bin recovery bin all
large sizes files (complete CWM of my last working tablet rk3188). Please ask me for pass to open 2x rar.
Maybe You will be able to advice me how to make proper files to revive my system from that backup I have, or help me some how to get CWM recovery working so I can use my CWM backup or any other way to make this tab back to life again.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP.
Many thanks for your kindness and time.
Adam
styropian said:
I'm badly need some expert advise.
.My china clone without name (rockchip-rk31sdk-WAWJMDN1KN).I decide to go ahead and try some custom rom using RKAndroidTool.
I did not realize that by cleaning IDB I will low level format..Before doing that I did save few pictures and run log via "android studio" also I backup whole unit via CWM hoping I will always have access to recovery.Unfortunately that not the case.The good think I still have access to RKAndroidTool( the tool is recognizing my device).There is the link to my CWM backup if may help
https://mega.nz/#!g8YgVKaa!209scxKfT...lRZ454peCCCsgU
https://mega.nz/#!gwRGhC7B!KFvTGpp4x...M2AHOKjT43VPQI
Inside that CWM backup is kernel.bin, system.bin recovery bin all
large sizes files (complete CWM of my last working tablet rk3188). Please ask me for pass to open 2x rar.
Maybe You will be able to advice me how to make proper files to revive my system from that backup I have, or help me some how to get CWM recovery working so I can use my CWM backup or any other way to make this tab back to life again.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP.
Many thanks for your kindness and time.
Adam
Click to expand...
Click to collapse
UPDATE____
RK3188 adb is running no screen__help PLEASE
After erasing IDB in my unknown china tablet and loosing my whole system I was able to load different custom firmware from Chuwi v88 + different kernel and my Tab popup in windows showing 2 extra drives F and G.I did open android studio and notice access to adb and all activity in my android.The RKandroidTool also recognizing my tab.
No reaction to power button only automatically connecting to my comp ( black screen on my tab).
I have original CWM backup of my device.
Can someone advise me how to access recovery from this point or find the way to completely start my tablet.Maybe is possible to recover CWM from adb?I will need some help to use a proper commands perhaps in adb.
ARCHOS 53 Titanium on the format in the sp flash tool. it needs to TWRP or CWM teeth then to upload rom whose theses I have not. help. very please all the help because I do not have a phone.