Related
EDIT!!!:
As this post was written on the 9th of December 2011, now it becamed outdated.
At that time, this was the easieset way for root, DMCR, CWR.
Now there are easier ways to root your device.
There are newer roms, kernels that already contains the DMCR and CWR.
I do not have time to update the OP.
So please keep this in mind while you read this topic!
25.01.2012.
--------------------------------------------------------------------------------
As there are some people, who likes to use the original factory rom, not the cooked ones, I decided to put together a brief tutorial on how to get most out of these roms (only basic steps!).
Important: All below mentioned are valid only for the devices with unlocked bootloader and running the Generic Central Europe ST18i (Ray) 4.0.2.A.0.42 (Android 2.3.4). It may work with others as well, but I haven't tested.
Disclaimer: In case that you follow this tutorial, I do not take any responsability for damaging, bricking your devices. You are doing everything at your own responsability!
With all these thingies that I collected, you'll have a rooted device, capable of dual way call recording, having the cwm recovery and freed from bloatware.
First of all make sure you have all the necessary drivers installed on your PC!
What we need:
- the Generic Central Europe ST18i (Ray) 4.0.2.A.0.42 generic factory ROM (Thanks to Jozinek and SE): Download link
- Flashtool (thanks to Androxyde): Download link
- rooting kernel (thanks to DooMLoRD): Download link
- patched factory kernel that enables the dual mode recording (thanks to skvalex): Download link
- CWM recovery install software, (SE Extreme Tweak Installer, thanks to quangnhut123): Download link
How2:
1. In case that you do not have the 4.0.2.A.0.42 rom on your device, flash it with Flashtool.
2. Boot your device, make the basic settings (language, wifi, gmail, so on...). Make sure you allow USB debugging mode in Settings/Applications/Development and to allow Unknown sources as well.
3. Switch off your device.
4. Switch it on in fastboot mode (pres and hold vol up while you connect to the usb). The BLUE led should light.
5. Flash the rooting kernel.
6. Reboot your device, check you should have superuser installed (your wifi doesn't work now, it is normal).
7. Switch off your device.
8. Switch it on in fastboot mode (pres and hold vol up while you connect to the usb). The BLUE led should light.
9. Flash the patched factory kernel that enables the dual mode recording.
10.Reboot your device, update superuser and # if needed (your wifi should be working now).
Congrats, now you have a rooted stock rom having the dual mode call recording enabled.
In order to enjoy this function, you'll need a recording software that uses this method, like: Download link
In case that you want cwm recovery as well, follow these steps:
11. Connect your switched on device, to your PC.
12. Run the SE_Extreme_Tweak_Installer and from its option window, select "CWM For Xperia Neo/ARC/ARC-S/Play/Pro/Ray", than press install. Wait till finishes.
13. In case that "Auto Reboot" was ticked, the device will reboot, otherway reboot manually your device.
Now you have CWM recovery installed as well. To use it, you should press and hold the VOL down button when you see the "SonyEriccson" logo while booting the device.
And of course now, in addition, you can get rid of the bloatware (list of junkies that can be safely removed from the device, the links are for ARC devices, but can be applied to RAY as well): Here or Here
The rooting procedure and the cwm recmode installation can be done in a lot of different ways as well. In my oppinion, this way, as explained above, is the easiest one(till now...).
UPDATE: Here is a very well optimized OC kernel with dual mode call recording (thanks to aire)
That's it. Good luck!
Hope you'll enjoy it.
If you like the tut, just hit the Thanks button!
Is doomlord's kernel necessary for the next steps? If not, isn't it much easier using the zegrush exploit?
Bazonga said:
Is doomlord's kernel necessary for the next steps? If not, isn't it much easier using the zegrush exploit?
Click to expand...
Click to collapse
Well, as I've mentioned : " The rooting procedure and the cwm recmode installation can be done in a lot of different ways..."
If you follow my tutorial you'll succeed 100%.
And of course there are other solutions that work 100% as well.
It is up to you to decide whichone will you follow
seatone said:
Well, as I've mentioned : " The rooting procedure and the cwm recmode installation can be done in a lot of different ways..."
If you follow my tutorial you'll succeed 100%.
And of course there are other solutions that work 100% as well.
It is up to you to decide whichone will you follow
Click to expand...
Click to collapse
Yeah I've read that, so it isn't necessary to use Doomlords kernel in order tu use the patched kernel and CWM?
Also, is there a way to combine the dual mode recording kernel with this one: http://forum.xda-developers.com/showthread.php?t=1322610 ?
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
TsunKit said:
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
Click to expand...
Click to collapse
Yes if your rom is flashable with ClockworkMod recovery, and of course is for our phone.
TsunKit said:
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
Click to expand...
Click to collapse
In case that the custom rom you want to use is flashable through cwr method, than the answer is yes (these roms are in .zip format).
aragog53 said:
No, it allows you to use "root asking" applications, such as Titanium Backup, Root Explorer etc...
....
Click to expand...
Click to collapse
Read more carefuly the tut before saying something... just my two cents...peace.
- patched factory kernel that enables the dual mode recording (thanks to skvalex)
Hi Seatone, Where is the source for above patched factory kernel?? Is it by you? Can you point me to the link address? Thank you.
Is there a kernel for overclocking, because mugetsu kills wifi :-(
Sent from my ST18i using XDA App
Neat! Been waiting for this. Thanks a lot bro! Just one thing - Can someone explain to me what does this mean:
10. ...update superuser and # if needed...
Click to expand...
Click to collapse
OC kernel
crownless said:
Is there a kernel for overclocking, because mugetsu kills wifi :-(
Sent from my ST18i using XDA App
Click to expand...
Click to collapse
Well, yes (thanks to aire): http://www.mediafire.com/?5sb60pipjxw9dgl
Try it and if it works for you as well, I'll insert it in the OP.
Томица said:
Neat! Been waiting for this. Thanks a lot bro! Just one thing - Can someone explain to me what does this mean:
Click to expand...
Click to collapse
You're welcome!
You'll probably be prompted to update superuser (actual version 3.0.7(41) and superuser binary (#) (actual version 3.0.3.2).
Ignore.
sent from my MIUI powered C64
seatone said:
Well, yes (thanks to aire): http://www.mediafire.com/?5sb60pipjxw9dgl
Try it and if it works for you as well, I'll insert it in the OP.
Click to expand...
Click to collapse
Is this kernel contain both overclock and call recording patch? or just overclock?
jackchua65 said:
Is this kernel contain both overclock and call recording patch? or just overclock?
Click to expand...
Click to collapse
It contains both. And it's a very well optimized kernel.
Its ok I now have recovery!!!!
Theme's for stock getting built later !!!!
Thanks
Going make some themes
sent from my gorgeus Xperia Ray
seatone said:
It contains both. And it's a very well optimized kernel.
Click to expand...
Click to collapse
Thanks for the posting.
I try to find the detail about this kernel, end up is in 4pda which all in Russia.
Is this the latest kernel from aire? I saw it got at least 5 or 6 update for the kernel.
The other thing which is more interesting is in 4pda, they have this ROM REPACK4PDA, which I can't download as well.
jackchua65 said:
Thanks for the posting.
I try to find the detail about this kernel, end up is in 4pda which all in Russia.
Is this the latest kernel from aire? I saw it got at least 5 or 6 update for the kernel.
The other thing which is more interesting is in 4pda, they have this ROM REPACK4PDA, which I can't download as well.
Click to expand...
Click to collapse
Added aire's latest kernel to the OP. Thank you aire!
About the REPACK4PDA rom: As its name says it's for 4pda...I suppose...
The rom itself is great (made by aire), it's what I use (slightly modified by me) and I'm 100% satisfied with it.
Alhough I do not speak Russian, as I've understood from their homepage, they are preparing to release the rom on xda as well. So, patiance (it will be a nice rom), or try to download it from their site.
Hey seatone,
Installed the kernel from OP. Phone works smoother now. I tried to find the downloadlink for the repack4pda rom, but failed. The place where the link is, remains blank. Guess I'd have to register at 4pda to get it. Could you tell me what the major differences compared to a rooted and bloatware removed stock SE rom with batterymod and transparent status bar (as i have now) are?
Thanks,
First off I do not own an i605 myself but have the l900 (sprint) which is almost the same device. Hardware wise there is only a tiny difference which is in the partition setup. Sprint uses a different data partition mccblk0p17 where all other N2's use mccblk0p16 the other is our mccblk0p16 which contains special files used by sprint on their stock roms (just to make our lives more difficult). I have been working with @lacoursiere18 on a few of my projects for the l900 and we tried to port an earlier version of MIUI for our devices before he got busy with school. Since then I have successfully ported over MIUI to the l900 and i605. Brian has been nice enough to test build out and confirm it works great on the i605. So now I am releasing this for your flashing pleasure. I also took a little extra time and modified Plasma 2.55 to work with MIUI and gotten permission from @ffolks (a few months ago) to post the modified kernel for everyone to use.
Well everyone (l900 users and those who browse the l900 forums) already knows I hate doing OP's so they stay pretty simple and this wont will be any different. Also MIUI users know that there are weekly updates but since this is a port and I have so many projects going on. It might be a month or two between my releases.
This is ported from the N7100 which is based on Omni rom. Original rom is located here
http://en.miui.com/download-35.html
and is the one by mdiary. So far only issues I know of it call recorder does not work (just says being used by another app) and you have to go into settings..mobile networks..network mode and change to CDMA+LTE/EvDO to enable 4g after every boot. If you flash any gapps package you will lose gps. If you continue to read the OP I will give instructions on how to setup your MIUI rom to get the most out of it.
So I took the base and turned it into a full featured rom with a whole mess of add-ons and tweaks.
Included items/tweaks/mods
Adfree (although I already have a host list created)
dolphin browser
dolphin jetpack plugin
adobe flash 11.1 kk
es file manager
LG G3 Keyboard and a few themes
WSM (MIUI Xposed)
Mi-Tools module (like wanam or gravity box)
Paid themes module (all miui themes are free)
AOSP Dash Clock widget
AOSP Calender widget
Terminal emulator
A bunch of build.prop tweaks
A bunch of init.d scripts (to enable them continue reading the OP)
Bug list
MIUI-i605 4.9.5
Any Omni bugs
call recording does not work
If you flash any gapps besides mine you will lose gps
Change Log
MIUI-i605 4.9.5 9-8-14
First port of rom
Downloads
Flashing instructions
1. Backup internal sdcard to you PC or external sdcard (this will really help prevent issues
2. Boot into recovery and backup current rom
3. Do a factory reset (if using philz/cwm do clean for new rom)
4. Format/wipe internal sdcard (if you dont do this and have issues first thing I will say is format it)
5. Reboot back into recovery (this will create your internal sdcard dir structure)
6. Flash MIUI and boot it
7. After initial setup power off and boot into recovery
8. Flash Gapps (please do it in this order or you will end up wiping and reflashing)
9. Boot into rom
10. Go to post #3 and follow those steps
Do not flash any kernel besides the modified Plasma or your rom wont boot. If there is an AOSP kernel you want to use let me know and I will make it compatible.
Plasma 2.55 MIUI edition Synapse is included in this flashable zip
https://www.androidfilehost.com/?fid=23622183712469118
MD5sum 13ffea951345225e8ad0abdaf2f279d4
MIUI Gapps
https://www.androidfilehost.com/?fid=23622183712469103
MD5sum c7bb4c995d6116a7c88977fe4821af10
MIUI 4.9.5
https://www.androidfilehost.com/?fid=23622183712469104
MD5sum 70bd84e1e6f65786a8ca8836b6908225
Importaint tips for MIUI
Simple things for now
1. Open security (located on first screen)..permissions.. and turn on root permission
2. Open WSM tools (miui xposed) and click install DO NOT reboot yet
3. At top of the screen you will see < Manage click here and enable all three modules
4. Reboot phone and setup Mi-Tools to your liking and reboot for settings to be applied
5. Open settings... general settings tab... mobile networks... network mode... set to CDMA+LTE/EvDO (will have to do this every boot to have 4g(LTE)
6. If you want to use a different launcher ( I dont like the iOS style launcher myself ) open settings... general settings... display... default launcher.. and select launcher3 or whatever you have installed yourself
7. Setup your google account and enjoy
Some things are in Chinese
in settings... general settings.. stock settings you will see two chinese options the top one is your advanced settings for samsung devices the bottom one is your Mi-POP settings (that circle with the back icon)
BELOW IS A NICE GUIDE FOR MIUI
http://www.hardwarezone.com.sg/m/feature-complete-guide-xiaomis-miui-v5-os
Things that are reported as issues
If you are having gps issues try this.
travisn000 said:
I have been using Maverick Pro from the play store and find it gets GPS lock with google maps from play store also installed... Once maverick has a lock other apps seem to work as well.
Here is the free version:
https://play.google.com/store/apps/details?id=com.codesector.maverick.lite
..i set my location setting to device only; the first time i used it it took a few minutes to lock, but its been very quick every time since.
The yellow dotted indicator in the bottom bar of the app shows number (16) of gps satellites found:
Click to expand...
Click to collapse
Themes that cause issues (random reboots, freezes, etc...)
material
last one
Thanks for the work you put in @jlmancuso and @lacoursiere18. Excited to give something new a try.
I'll give this a shot over the weekend.
Awesome good to see this ole device still getting some luv :good:
jlmancuso said:
last one
Click to expand...
Click to collapse
Thanks for the mention sir.. But I really had nothing to do with getting this working.. All you BRO!
razortaz18 said:
Thanks for the work you put in @jlmancuso and @lacoursiere18. Excited to give something new a try.
Click to expand...
Click to collapse
Not me.. @jlmancuso put all the work in.. Me and AOSP do not play nicely =)
Cmon TW version loll
Thanks!
Everything works just fine so far.little problems i had were just ignorance on my part.
Think its possible to do an agni kernel?
Thanks again for all the hard work!
Will this ota update. How well do themes work?
Sorry i missed the month or two line.
dudeicles said:
Everything works just fine so far.little problems i had were just ignorance on my part.
Think its possible to do an agni kernel?
Thanks again for all the hard work!
Click to expand...
Click to collapse
Give me a link and I will see what I can do. You willing to test?
rippedwarrior69 said:
Will this ota update. How well do themes work?
Click to expand...
Click to collapse
No ota. Themes work great although I did hear one did cause issues ( material ) but everyone I have tried worked fine. Any with issues I will post in 4th OP. As they are reported.
Sweet are you going to keep updating or is this the only version?
rippedwarrior69 said:
Sweet are you going to keep updating or is this the only version?
Click to expand...
Click to collapse
Read OP.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Give me a link and I will see what I can do. You willing to test?
No ota. Themes work great although I did hear one did cause issues ( material ) but everyone I have tried worked fine. Any with issues I will post in 4th OP. As they are reported.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2608679
Added a link to a very nice users guide for miui in post 3
Sent from my SPH-L900 using XDA Premium 4 mobile app
Thank you so much for this. This rom is beautiful and so much better then tw. I cannot thank you enough.
So, does Google maps not work with MIUI? Loaded maps and compass got GPS only lock but Google maps just kept searching for location.
Sent from my SCH-I605 using Tapatalk
I cannot get anything to get location. Keeps telling me my location services are off but they are not. Please help. Also mi tools will not move clock to center of status bar.
Q&A for ***FeraLab*** Official - Break The Limits...
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
install success.
Already install rom v40 & kernel v25 into my 2yrs old xperia x10.. Currently testing it for nearly 1 day without charging and still have power to go.. awesome rom.. !!
because they touch on the JB works better than GB, you can edit the build.prop (debug.performance.tuning) and (video.accelerate.hw)
I edited the and feel it is more sensitive.
You can take this into account, if you made V41
No sdcard
After flashed v40 my memory card is no detected,in recovery work if I mount usb storage?
Formated and work now.
Sent from my X10i using Tapatalk 2
Background apps
Just one question why do Background apps still appear even if you swipe them away holding down the home button?
Hello there. On 1st. I just want to thank You for this great job u have made.
I am on v40 and FeraKenel v25. It feeling nice, but i have a one bug. Unfortunately sometimes, when the phone is on "non using mode" When i click "power" to see my apps etc. it's just turning off or crashes (black screen) and after few seconds it's turning on normally.... (FeraKernel Logo etc.) It's kinda annoying, when it happens few times per day... Someone had this problem too? Any advices to solve it?
@edit. Guess noone want to help me
Thanks you for your room and kernel feralab. I have just download and install your room. I feel your room very good and smoothly. But when I used Accound in User, my mobile notice :
Sorry! The applicantion Settings ( process com.android.setting) has stopped unexpectydly. Please try again.
Click to expand...
Click to collapse
I used x10i, locked bootloader. Can you fix it please Thanks for your room.
Hi FeraVolt thank you for this amazing ROM and all the other staffs you guys are developing, I read most of these threads and or comments and even Q/A forums everybody is content and except some minor bugs there doesn't seem to be any more problem with you work. I wanted a little detailed guide for me in order to flash your **FeraLab*** Official - Break The Limits.... ROM and Kernel to my xperia x10. I would appreciate that.
---------- Post added at 10:08 PM ---------- Previous post was at 10:00 PM ----------
Agiofws said:
Just one question why do Background apps still appear even if you swipe them away holding down the home button?
Click to expand...
Click to collapse
Hi Aqiofws, would you PM me the instructions for flashing this **FeraLab*** Official - Break The Limits... ROM and Kernel on to my xperia x10.
That would be very kind of you mate.
Just reboots, always.
I cant play games, any game. Market games. Just reboots, always.
NO wifi
Hi !
I have gone over installation a few times and even flashed with flashtool but yet I cannot seem to get the wifi to work. it gives error while trying to activate. Any tips ?
OK, the last time I did this it the process com.sonyericsson.home is closed and gives error.
Hello..Sorry my bad english.
great rom very thank....Is possible reupload Finally fixed all v40 GB ROM bugs && made few more modifications ????
The link is dead :
v40_ROM_fixes.zip
Merci
can you make another mirror for feralab v40.1
Are there any alternative links to the latest FeraLab kernel + firmware?
Uploaded.net seems not to be working for me...
Can't install feralab v40.2 with locked bootloader
I flashed the stock rom, rooted, and installed xrecovery. My flashtool does not have cwm so I can't install it. I can't install v40.2 zip from xrecovery, I get an error: E:Error in /.... (Status 0) Installation aborted.
As feravolt said "You may probably want to install LB kernel if you don't have CWM6 recovery." I tried installing "[GB]FeraKernel-v28_LB.zip". It completes but nothing changes. I still have the xrecovery.
What should I do?
I have problem,when try to install v40.2 it say error status 0 i nothing happend....and on v40 when complete instalaltion on the stratup it making error process com.sonyericsson.home ...
what am I doing wrong
but camera is 1632*1224 (2MP)
hello
i flash [GB]FeraKernel-v28_UB and instal [GB]FeraLab-v40.2_Firmware(FK28)
but camera is 1632*1224 (2MP)
Why؟
thanks
Hi fera
Could you make an option in aroma which can remove gapps( GooglePlay, GMS, etc... ) from rom in the installation of final rom ?
I think actually the gapps make the rom heavy and I use them rarely. V40.02 was very slim and has a lots of free phone memory.
Thanks
camera bug
Camera app in feralab 41 don't zoom in/out can sobody give me a gaps with stock camera app?
Installed v41 feralab firmware . But No playstore
Hi Feralab,
Greatjob on developing the firmware.
There were no issues during installation of kernel and firmware.zip file.
There is no google play store. Android version in this firmware was 2.5.1
I have downloaded 2.3.5 gapps zip file(gapps-gb-20110828-signed.zip file) and tried other zip files too.
Play store or Market apps were installed. But when i try to install any app from the store and click install after opening the app, it shows just downloading progress bar. But it is not downloading.
I tried clearing data and cache. But of no use.
Could you please send the link for gapps.zip file which will work with this firmware.?
Thanks in advance.
Q&A for [Audio Mod] eXtremeBeats™ Any Device
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
IaKnightHawke said:
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
Click to expand...
Click to collapse
Their is no app to say anything is open. Just trust the buildprop lines.
---------- Post added at 10:59 AM ---------- Previous post was at 10:58 AM ----------
masterganja said:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
Click to expand...
Click to collapse
Sorry, looks like it is incompatible. Keep using 1.0.
Thanks
OK Thanks for the response.
Does it work on miui?
Sent from my HM 1SW
bobinx said:
Does it work on miui?
Sent from my HM 1SW
Click to expand...
Click to collapse
Providing it's Android 4 or up, sure.
Opss, until now I found problem with my phone: even I install busybody 15 or 18, then flash this mod (v2), then I found nothing add into my system/app and system/framework, ... only string was add into my build.prop. I don't know why, but before I installed successful this mod, with full file in this zip into my system, now didn't, even I mount system in recovery before flash zip. My phone is rooted, of course. Anyone like that?
hey guys,
I've installed this mod and I have a question.
Is there any app where I can configurate settings like in viper4android? Or is this mod made of various libs and Service's running in the background without a primary app?
Sony Xperia Z Ultra 4.4.4 Stock not compatible
Flashinh this to my leads my Sony Xperia Z Ultra 4.4.4 Stock to infinite reboots. Device reboots after several seconds of booting into system
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
taus3q said:
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
Click to expand...
Click to collapse
More specific please... EB version? do you have custom kernel installed or just stock kernel from rom? do you mount /system before flashing EB? The best way to install EB is after flashing the new rom. You need to mount /system then flashing EB. Reboot. After that install v4a and its drivers. Reboot again. If you follow that method and found it's not working try another version of EB. If the problem still persists, seems like it come from your rom side not supporting it.
Hi!
This beats-mod seems very promissing.
I wonder if it will work on my brand new I9301 S3 Neo ???
Because I also need to root it and wonder if it worth?
Please let me know, I love hi-fi music.
Cheers!
Sent from my GT-I9301I using XDA Free mobile app
How much time it take for installing the library?
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
iGordy said:
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
Click to expand...
Click to collapse
Just flash this in your recovery, and you are done.
Download link
Pls tell where is the download link of zip file
i flashed version 2.1 on my evo 4g lte with TWRP recovery and it flashed fine, but when i rebooted and played music, it stayed the same. Was an app supposed to be installed or something? I have Viper4android installed already, but extremebeats doesnt show up anywhere...are there more steps besides flashing with recovery?
Stock Rom?
I'm new in this kind of topics. Does it work with a Stock Rom?
This mod doesn't work on my HTC One M8. Android 4.4.4 3.28.xxx.x Rooted Stock, S-on. Tried it a bunch of times with different practices, it just soft bricks the phone every time.
OP, what can you say about this? It says in your page that my device is supported but it doesn't work. Or maybe it's just me, what should I do if it is? Help please, I'm really eager to have this mod.
Ehi guys just tested v78arm64 but phone quickly reboot after succesfully boot. Any ideas?
I restore system With a twrp backup now..
Same situation, tried different frameworks but they all makes the device show the lockscreen an then reboot after 15 seconds or so. I looked everywhere I could, and I found that rovo89 sustain he's unable to make Xposed work because he can't do a deodex on service.odex (see https://github.com/rovo89/Xposed/issues/64) BUT AndroPlus lists the Z5C as working with broken camera in his guide on repairing the camera problem (see http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962)
I don't know who to trust, and I'd like to ask directly to AndroPlus in his thread, but XDA prevents me posting there. Thanks XDA.
Edit: solved; my issue was caused by incompatible ROM and Kernel. Go two posts down for details.
Anyone? I'm also having trouble finding a version that works...
Xposed Framework for Z5C is xposed-v79-sdk22-arm64
dew.man said:
Anyone? I'm also having trouble finding a version that works...
Click to expand...
Click to collapse
Short answer: xposed-v79-sdk22-arm64.zip (direct download link from Rovo89)
Long answer: you might have to prepare the phone, so check out these references.
ROM: http://xperiafirmware.com/8-firmware/126-sony-xperia-z5-compact-e5823
Kernel: https://kernel.andro.plus/kitakami_r2.html
Xposed Framework for Lollipop: http://forum.xda-developers.com/showthread.php?t=3034811