http://youtu.be/tItguxqcKOM
The first hard plastic type case that I've found to cover the top and bottom of the phone.
Most of the hard cases leave the top and bottom exposed but this one covers all 4 sides.
Thank you for the review! I still don't know what i want yet for my note 3... as far as i know i liked it naked. But i do drop stuff a lot when i sit down.. phone usually slide out of my pocket when i sit.
I did see that case online but dismissed it due to the hole at the top right hand corner. In my experience, corners are the first to go when you drop your phone!
The top and bottom protection is nice though..
[EDIT] Would definitely have ordered it if the the break at the top right hand corner was a slit like the top left hand corner, though!
gongmonk said:
Thank you for the review! I still don't know what i want yet for my note 3... as far as i know i liked it naked. But i do drop stuff a lot when i sit down.. phone usually slide out of my pocket when i sit.
Click to expand...
Click to collapse
I actually used the phone naked for 2 weeks before I got this case and I miss the hand feel of the phone. The ridged sides and textured back actually feel very nice when it is being held. The Ringke is slim, but I wish it was even thinner. If the battery cover was elevated just slightly enough to lift the camera, I would probably go naked.
Got this case also and it is pretty slim and I do like the fact that it covers the top and bottom unlike other slim hard cases. There is no lip and the silver band around the screen is exposed so if it falls face first you're going to have some nice scratches.
Overall its a good slim case.
Related
Got one of these yesterday, it's a perfect fit and it barely adds any girth to the phone. It actually feels the same size in my hand believe it or not.
The only issue I have is that it leaves the top and the bottom of the phone exposed. Oh and that is pretty hard to get off the phone.
Overall, I'm very satisfied with my purchase.
Sent from my SAMSUNG-SGH-I717
Any pics? I just ordered one off amazon yesterday
Sent from my SAMSUNG-SGH-I717 using XDA App
Just got mine too. Fits really well and has a grip to it versus the stock back.
I also have this case in white. Mine is just as slick as the stock note back though. Otherwise, it fits great.
nino313 said:
Any pics? I just ordered one off amazon yesterday
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
Posted pics in the white case consolidated thread in this subforum.
Still love this case.... I kinda want something to protect the tops and Bottoms though
Sent from my SAMSUNG-SGH-I717
Yeah I bought this case in Indigo Blue before I got my phone and it is nice for a slim case, but I decided I needed more protection. It does leave the top and bottom edges exposed and starts out a little tight when new. I only use it for times when I need a slim case.
But the texture is nice and I really don't have anything bad to say about it.
Sent via Tapatalk on my Samsung Galaxy Note™ SGH-I717
Just dropped my phone with this case on. I was sitting down and as I was getting up, I forgot I had the phone connected to my pc still. It yanked outta my hand and landed on the corner. Then it bounced up back into my hands, no joke lol
Not a scratch on the note! Only a dent in the case!
Sent from my SAMSUNG-SGH-I717
Bought one of these to replace my SGP Ultra Thin which seems a touch oversized (creaks/pops when squeezed) and too slick.
Hopefully this one is a tight fit and has a texture like Incipio's Feather.
via my AT&T Note
no pics though?
The Elagio case is outstanding, will post some pics later.
via my AT&T Note
This thread is worthless without pics!
Jk, will google.
Sent from my SAMSUNG-SGH-I717
Here are some quick pictures I snapped of the case (front and back). Its got a great matte black finish that really reminds me of the Incipio Feather I have used on the Atrix and iPhone4 in the past. This one seems more durable with the short time I have had with it- it doesn't feel like it will snap easily like other thin cases.
Its really not difficult to take off unless you have only used soft gel or TPU cases before. Just pop off one corner, then the other on the same side and the entire case comes right off. Since the bottom is open, it works in the Samsung Desktop Dock perfectly.
(Don't mind the lift/bubbles on the screen protector, the new ones are in the mail )
leaves the top and bottom edge exposed?
no good in case of drop
SayWhat10 said:
leaves the top and bottom edge exposed?
no good in case of drop
Click to expand...
Click to collapse
The white one is not matte... It's pretty slick. It does have a little grip too it.
The top and Bottoms are exposed, however the corners are not. So drops on the corner aren't as bad as you might expect
Sent from my SAMSUNG-SGH-I717
Sent from my CM9 Atrix
I got mine yesterday. I got the matte blue.
I'm pretty sure I'm gonna return it though.
I found it actually more slippery than the stock back.
I don't mind the top and bottom exposure because I think the odds of impact at those points are slim. I think the corners are most important and I don't know why one of them has a cutout (top right). I can't see a reason for it.
Looking at my last phone's scratches the corners are where it hit the few times it fell.
As far as the exposed top and bottom I guess it was easier to mold that way...
Like I said I don't mind the exposure but I realized the bottom opening has a bit of an edge to it. Noticeable. I was holding the phone one handed and I noticed I use my pinkie finger along the bottom of the phone as a cradle.
Unfortunately, that edge is right there and was uncomfortable.
So the case is beautiful and has the looks and the feel (but a bit slippery) but the exposed corner and the bottom edge make me want to try something else.
On my tbolt I had a Seido Surface and it was perfect. Slim and added very little bulk and weight.
I contacted Seido to see if they were going to make that line for the Note and they said at this time they weren;t. Perhaps the 5 million in sales will change that...I guess for now I'll keep it naked and research some more.
I got the black and white versions of this case off Amazon. The black definitely has a better grip. The white looks great with my new white note, but like other's have said, it's a glossy finish and doesn't have the some tact feel as the black.
I also got another cheap black case that has a small frame that snaps on the front to provide a lip around the screen. It feels exactly the same as the black elago, and aside from the front screen lip, it's the same size.
http://www.ebay.com/itm/BLACK-Rubbe...ccessories&hash=item41630e05d8#ht_1694wt_1396
schrochem said:
I got mine yesterday. I got the matte blue.
I'm pretty sure I'm gonna return it though.
I found it actually more slippery than the stock back.
I don't mind the top and bottom exposure because I think the odds of impact at those points are slim. I think the corners are most important and I don't know why one of them has a cutout (top right). I can't see a reason for it.
Click to expand...
Click to collapse
I noticed that my case was slippery at first as well, but over time, it isn't as slippery as the stock white cover any more.
Also, the cut out on the upper right corner is to accommodate the antenna on the Korean version of the GNote. Rather than retool their fabrication process for other markets, they just used the same mold for all. At the price this thing goes for, you'd think they would've done a separate fabrication for models without the need for the cutout.
Other than that, I'm pretty happy with mine.
I found this review of the Nilkin case for the Xperia P helpful, and wanted to give back by posting a review of my own. Had been pretty keen on the Nilkin case myself, but after reading the reports of the corners cracking, I went looking for another quality option and ended up with a Rock Quicksand. This is a "dark grey" model I bought from Casesss.com.
Note the white specks that appear on the case are bits of dust/fluff that aren't part of the case surface - sorry for overlooking these but they didn't look that visible while taking the pics, and it'd be too much of a pain setting up my tripod and lighting again to redo them nicely with my crappy camera. Also note the pics convey a sort of "white speckliness" overall which is not how it looks in person - IMO, the case looks better than it appears in the pics.
First, the positives:
- The material is really nice. It looks and feels classier than silicone or textured plastic.
- With moist/sweaty hands, the case provides more grip than the smooth metal surfaces of the phone.
- It allows the phone to sit more securely on your lap or a nearby surface (e.g. train/bus seat) with less fear of it sliding off and onto the floor.
- The cutouts are accurate, and there's plenty of clearance left around the headphone jack.
And the cons/caveats:
- With dry fingers, the material is actually less grippy than the phone's smooth metal surfaces.
- Some reviews of Rock Quicksand cases for other phones suggested the material doesn't grip pocket liners - I disagree. It's not a problem with big/loose pockets on cotton pants, but in more constricted front jeans pockets, it will tend to pull out the pocket liner when removing the phone. Still, it's not as bad as silicone in this respect, and doesn't retain nearly as much fluff/dust as silicone.
- The cutout for the transparent bar is much smaller than one on the Nilkin case. This probably increases the case's strength but doesn't look as cool.
- The buttons are a bit harder to press than without the case, but this seems unavoidable - the cutouts appear as non-intrusive as is possible for this style of case.
Overall, I'm very happy with the case for the purpose of providing extra grip in the situations I most need it and providing some protection, without making the phone look ugly. Would be happy to answer any questions in case I missed anything.
I am also using this product. Very good case.
Sent from my LT22i
can one get it online?
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Adityagrao said:
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Click to expand...
Click to collapse
Screenies please?
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
rogue operator said:
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
Click to expand...
Click to collapse
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
peeled too much... which casing can on get or leather pouch?
Zap_12100 said:
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
Click to expand...
Click to collapse
uhm very bad....did you go tu the beach or something???
I used to use this case and yes, it's beautiful at first but after a long time of using, it become ugly and i must change another one =.=
i wish i can find one of those in Egypt ,
I also got one of this case but mine is purple and the rubber of some place on the casing have lost but between it's a nice case I'm happy with it.
After just over three months use, I can report the "sand" has now rubbed off the rear corner adjacent to the one I pictured on the previous page (that one hasn't gotten any worse since the picture was taken). The three other front corners also show the same sort of wear, but smaller. The edges and larger surfaces show no signs of wear.
In my case, it seems most likely the wear is being caused simply by the phone rubbing against the pocket liner when in my jeans/jacket pocket, so it's not a very durable surface. With just the corners worn, mine still looks classier overall than other cases and I'd just as soon choose it again over the alternatives, but I can't recommend it to those whose phones are treated less softly than mine, as it may end up looking like crap in a short period.
Very usefull case it is..:good: protects the device very well....
I have a quicksand case for my Xperia Sola. I just got it a few months back and so far I'm quite happy with it. The overall build quality seems to be very robust. However on two corners the rubber starts to come off, but that doesn't really bother me as long my phone is save
i haven't use case for a yeah and now my XP look like old phone :cyclops:
is the available for xperia go?
GGG
Just wondering how durable the Dura-Skin is on the front top & bottom of the phone?
How's it holding up?
Any wear marks, scratches ETC?
I've only had mine for maybe 2 weeks but it's still perfect. I even accidentally like spiked it onto the bathroom floor like a football and it's still perfect everywhere.
I started with a skinomi skin... it looks great.. and I didn't use the provided screen protector or back protector. but all other surfaces were covered. I did have a problem with the skin sticking to the corners of the rails so I trimmed them before they peeled off too much then put the thin TPU case on...
I like the case. doesn't add any bulk and adds a bit of grip.
Still perfect but ihave a little wear n tear on the side rails im gonna change them for black rubber ones when they get released ` will make the phone more durable and lighter
The Duraskin on the top and bottom of the phone is perfect. However, the coating on my back cover started peeling on the bottom edge near the USB port within a few days. It's not bad, but its there.
Hard to capture in a picture.
I currently have this case:
https://www.spigen.com/products/galaxy-s8-case-liquid-air
I like the case but I don't like how it wraps around the edges, I personally want something very minimal around the left and right and more substantial near the top and bottom. I was also looking for a case that lifts the screen to protect it from scratches.
I kind of liked the look of these, or this one, this however doesn't have anything to protect the screen at the top and bottom.
ajacob234 said:
I currently have this case:
https://www.spigen.com/products/galaxy-s8-case-liquid-air
I like the case but I don't like how it wraps around the edges, I personally want something very minimal around the left and right and more substantial near the top and bottom. I was also looking for a case that lifts the screen to protect it from scratches.
I kind of liked the look of these, or this one, this however doesn't have anything to protect the screen at the top and bottom.
Click to expand...
Click to collapse
this is the one i got and it is nice and small but does a good job ..i've used this brand on all my phones since i seen them a long time ago
https://www.amazon.com/dp/B071JJMKWH/ref=twister_B06Y5W3QS8?_encoding=UTF8&psc=1
I really enjoy Imak Cowboy cases:
https://m.ebay.com/itm/IMAK-Cowboy-...y-S8-S8-Plus-/262928896548?_ul=DO&_mwBanner=1
I used this which is even slimmer than the ones earlier in this thread, has side cut outs so you have direct contact with buttons, nice a slim but good protection especially on corners. https://www.amazon.com/Spigen-Surface-Excellent-Compatible-Samsung/dp/B06XP54BCW and here https://www.spigen.com/collections/galaxy-s8/products/galaxy-s8-case-thin-fit?variant=30615746689
I would suggest you this one from Ringke:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/302271756145
Can't recommend enough
https://www.amazon.com/gp/product/B06XV63RPJ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I believe samsung's original clear case is slimest & strong enough to protect our phone.....use it since i bought S8.
Currently, I have 2 cases for my S8 which is Ringke Onyx and VRS Design Single Fit. Both of them are good enough to protect our S8 from everyday bumps, however I also plan to buy the SUPCASE UNICORN BEETLE STYLE so I can show off my Maple Gold colour
I'm looking for a red silicone case, like the one apple makes for iPhones. Any suggestions?
Just got this case and am really liking.
Much thinner and lighter than I expected. Much lighter than book cover.
Like the pen holder
Good grippingin on 2 sides. Kinda loose when gripping on edges with pen or camera cut out.
Super easy on off. Perfect fit of all ports and speakers
Only realcomplaint is no kickstand
https://www.amazon.com/Poetic-TurtleSkin-Protection-Protective-Silicone/dp/B07G5MZCFB
Hi. I also ordered from Poetic, waiting for delivery. I have a question : The navigation bar is easy to access ?
crissx said:
Hi. I also ordered from Poetic, waiting for delivery. I have a question : The navigation bar is easy to access ?
Click to expand...
Click to collapse
The case gets in the way a little but still useable
I just got this same case. This is a bit of an issue for me:
Good grippingin on 2 sides. Kinda loose when gripping on edges with pen or camera cut out.
Click to expand...
Click to collapse
Actually, for me it's bad on 3 sides, top, bottom, and s-pen side, but i don't grab by the top or bottom too much. Kinda feels like it could fall out of the case, and the side with the S-pen, just feels like a handle that I intuitively try to grab, especially because it doesn't have a kickstand, I wanna grab it on one side.
mistermojorizin said:
I just got this same case. This is a bit of an issue for me:
Actually, for me it's bad on 3 sides, top, bottom, and s-pen side, but i don't grab by the top or bottom too much. Kinda feels like it could fall out of the case, and the side with the S-pen, just feels like a handle that I intuitively try to grab, especially because it doesn't have a kickstand, I wanna grab it on one side.
Click to expand...
Click to collapse
Agree on spen edge and cutout side, but no issues with other edges. I'm really liking this case and haven't switched back to the book cover even once yet.
gottahavit said:
Agree on spen edge and cutout side, but no issues with other edges. I'm really liking this case and haven't switched back to the book cover even once yet.
Click to expand...
Click to collapse
I have gotten more used to it. I will probably keep this case on until a more rugged case comes out, preferrably with a kickstand. Also sort of thinking of whether there's a case I can put over the top of the case, maybe a UAG exoskeleton.
mistermojorizin said:
I have gotten more used to it. I will probably keep this case on until a more rugged case comes out, preferrably with a kickstand. Also sort of thinking of whether there's a case I can put over the top of the case, maybe a UAG exoskeleton.
Click to expand...
Click to collapse
Really wish they made the UAG Metropolis for this. Had on an ipad pro and the tear away cover is fantastic. Love that case(Hated IOS though and never really used it)