Hello,
I buy this cable (http://www.ebay.fr/itm/New-3-5mm-Ca..._PDA_Cables_Adapters&var=&hash=item25825ebea6) on another seller ... and doesn't work on my 9005, no charge, no detection, no sound ...
Defective cable ? or incompatible ?
Related
Hi all,
I bought a second hand Blue Angel with only the charger and I am unable to sync it through bluetooth (so far atleast). Is there anybody who either has a USB cable for sale OR can somebody please tell me where I can buy one.
Thanks
search the ebay.com u will get the cradle or cable
need expetise and advise
my ATOM cannot charge and cannot connect via activesync
battery and usd cable and power charger are proven OK, tested with other Atom , it works
now suspect mini usb port problem or software or other hardware problem
when i hook up charger or usb cable , the red light on for a while and off
i can see the charging logo on for a while, i go to POWER screen, can see charging but just a while only
tell me all possbile solution
million thanks
This could be hardware error...the usb port...
But...try it with carefully plug the usb cable, slowly...don't pull it to end of device slot...
Just untill the red light of battery charging turned on...then leave it...
hope this help...
cmiiw
same problem..
i had this problem recently as well, mine turned out the usb sockets on one of my notebooks couldn't cope with the current being pulled to charge and so shut themselves down stopping the charging after a few seconds. i found a mains to usb charger plugged it in and left it for an hour and all was ok again. if you don't have a mains charger try one of the dual usb to mini leads you get with some external drives, the one i tried seems to spread the load enough to charge the device
hope its something as simple as this for you as well
the atom series from quanta have a lousy usb port and ear piece component used
both of these component need to be hot air-ed out of the board in order to do replacement.
the usb port will be easily fallen off from the board due to poor soldering or mis-used by user.
the ear piece 2.5mm jack will be spoilt when frequently used and headset unplugging from device. when faulty, the device will think that the headset is still inserted & do not project the sound out during a call from normal hearing speaker (user can only use bluetooth headset to do calls) the mic will not work too if loudspeaker mode is on.
my 2cents, find someone skilled to replace them if they still can find the component in market & u think its worth servicing or buy another model.
Hello,
I want to purchase accessories for my soon coming Touch Pro 2.
Wanted: A solution to use video out, charge the phone AND use 3.5mm handset at the same time.
The HTC OEM Charging Headset Adapter (SC5310) has 3.5mm, 2.5mm and Mini-USB Out.
Will the Video Out cable work from the mini-usb port on the charging adapter? Or can the charging adapter with headset and charger connected work through the mini-usb of the video cable that is directly connected to the phone?
Are there any other suggestions?
Thank you in advance!
You can try No2chem's nueTVOut app. Haven't gotten to work for me, but it may for you...
http://www.nuerom.com/BlogEngine/page/nueTVOut.aspx
I just tried this for you and it works fine - Video out cable plugged directly into phone, headset and charger plugged into video out cable. Everything works
Got my video out cable from meritline, in case it matters.
IMissPalmOS said:
I just tried this for you and it works fine - Video out cable plugged directly into phone, headset and charger plugged into video out cable. Everything works
Got my video out cable from meritline, in case it matters.
Click to expand...
Click to collapse
Thank you very much for the feedback!
Hi,
Does anyone know if the y splitter usb audio cable works without the car dock?
This one http://www.motorola.com/us/consumer...icle-Docks/m-Custom-Audio-Cable,en_US,pd.html
crunchie-uk said:
Hi,
Does anyone know if the y splitter usb audio cable works without the car dock?
This one http://www.motorola.com/us/consumer...icle-Docks/m-Custom-Audio-Cable,en_US,pd.html
Click to expand...
Click to collapse
I will try it later today.
But what i do know is that normal usb cables don't work on the dock itself, so the inside of the cable is different.
You will hear from me tomorrow!
crunchie-uk: It works!
USB audio via this cable does NOT work for me without the dock. When the cable is plugged directly into the phone, it just plays through the speaker still. I am guessing the special circuitry in the dock that triggers the phone to go into vehicle mode also triggers it to output usb audio.
Hi Guys... This morning my headphones stopped working suddenly and sound just coming from the speakers and got " supplying power to the connected device over usb...
Ps charging and super charging works perfectly
It's ****ed. I had exactly the same problem it's a broken usb board.
I returned mine for repair
timlobley said:
It's ****ed. I had exactly the same problem it's a broken usb board.
I returned mine for repair
Click to expand...
Click to collapse
But the charger is working...!!!
SaMa El said:
But the charger is working...!!!
Click to expand...
Click to collapse
USB Port is broken. Charging does not mean your port works flawless. You will not get sound over usb-c dongle until you sent it for repair. The pins inside usb-c were used by different mode like audio/video/data/power.
The Pins that were used when charging were working, so you have fast charge, but some of the pins used in audio mod were obviously broken. That is why you have no sound.
They tried to make it out that is way my fault due to water damage.
Until I pointed out that the phone was water proof ?
My nephew's M10P (that I gave him to get my M20X) just did the same thing. Charging works fine and speakers on phone are fine. Was hoping an update bug.
Update: i bought a new headphones and it work fine... My oldest headphones was just damaged