Description
Here's another feature I extracted from the GravityBox Xposed Module.
The module adds a bar at the top of recent tasks screen showing the amount of used/free RAM.
Requirements:
Xposed Recent Tasks RAM should work on any device having Xposed 2.1 or greater and Android 4.1 or greater (google based rom.. as mentioned in the GravityBox post "pure or close to pure Android").
Tested on
- Samsung Galaxy Ace S5830 with Android 4.3 (teuf3l)
- Samsung Galaxy S with HellyBean (a fork of Cyanogenmod 10.2 - Android 4.3) and Xposed 2.3.1. (myself)
- Samsung Galaxy S3 with 4.1.2 Touchwiz ROM (SuperSmashedBro)
- Samsung Galaxy S4 with WanamLite 1.5 XXUBMH1 Android 4.2.2 (TouchWizz Rom) (yurividal)
Thanks
To C3C076 for his open source development.
Download
From the bottom of this post or from the Xposed Repository.
Update: v1.1
Fixed the number formatting issue (Reported by yurividal)
Thank You!!! I have been waiting for this a long time! I had also requested Wanam to Add it on His WanamXposed. Can i link him the source code?
---------- Post added at 03:53 PM ---------- Previous post was at 03:44 PM ----------
Just an Observation:
On my i9505 it looks a little weird. I have 2GB of ram. When i see the Bar, i usually see 0.91GB used / 900MB free...
The used part rounds to GB, while the Free remains on MB... this is a little annoying. Would look nicer and be more eye-friendly if it all remained in MB...
GravityBox and XBlast had the same issue. Could that be moded?
It is nothing serious, but i believe it would make the app look nicer.
Thanks for your work!
Can i link him the source code?
Sure.
GravityBox and XBlast had the same issue. Could that be moded?
The problem obviously persisted since I took the code from GravityBox. I'll look into it. It shouldn't be difficult to fix this.
Nice! Thank you. It shure looks much better and user-friendly now!
Take a look at before and after Screenshots.
By the way, on your description you say it is suposed to work on AOSP roms only. You can go ahead and add Samsung TouchWizz Roms too. (touchwizz users will have 2 clear-all buttons. One from Samsung on the bottom, and one from the Mod on the top. No big deal tough)
yurividal said:
By the way, on your description you say it is suposed to work on AOSP roms only. You can go ahead and add Samsung TouchWizz Roms too. (touchwizz users will have 2 clear-all buttons. One from Samsung on the bottom, and one from the Mod on the top. No big deal tough)
Click to expand...
Click to collapse
Thanks for the feedback. I wrote that in the first post.
Position Bug
Here's a bug i found on the Galaxy Nexus(maguro) running Paranoid Android 3.99 RC2.
It would be really nice if you can fix this!
sd3993 said:
Here's a bug i found on the Galaxy Nexus(maguro) running Paranoid Android 3.99 RC2.
It would be really nice if you can fix this!
Click to expand...
Click to collapse
on gravity box this thing has a vertical offset .. have you tried that.. i faced the same on GNex then i put the offset to 10px and it was fixed. Am using stock 4.3 with Xposed framework
ReVo_007 said:
on gravity box this thing has a vertical offset .. have you tried that.. i faced the same on GNex then i put the offset to 10px and it was fixed. Am using stock 4.3 with Xposed framework
Click to expand...
Click to collapse
Yes i used the vertical offset when i used GravityBox or XBlast. But there is no such option here. I hope he adds it soon!
Oh then you should hope he adds it soon
works on Samsung GT S5830 and android 4.3
good job, thanks.
Works on S3 4.1.2 Touchwiz ROM, looks great!
Works on the Sprint Note 3 just fine. Thanks!
!
Sent from my SM-N900P using Tapatalk
Overlapped in Nexus 7 2012 too:
Hi
I got "invalid package" both using your in OP and the one in repo.xposed.info ...
Maybe I'm on Android 4.0.4?
sd3993 said:
Here's a bug i found on the Galaxy Nexus(maguro) running Paranoid Android 3.99 RC2.
It would be really nice if you can fix this!
Click to expand...
Click to collapse
I won't add any user interface. Maybe I'll find a workaround to automatically set the offset when necessary.
Publiuss said:
Hi
I got "invalid package" both using your in OP and the one in repo.xposed.info ...
Maybe I'm on Android 4.0.4?
Click to expand...
Click to collapse
Yep. It's for 4.1+
Though... If I think it through, this should work with Android 4.0 too. I'll try to decrease the minimum SDK level. I can't guarantee anything but I'll try that and hopefully it will work.
EDIT: Here's it is. It should work on Android 4.0+. Please test and tell me if it works.
blchinezu said:
Yep. It's for 4.1+
Though... If I think it through, this should work with Android 4.0 too. I'll try to decrease the minimum SDK level. I can't guarantee anything but I'll try that and hopefully it will work.
EDIT: Here's it is. It should work on Android 4.0+. Please test and tell me if it works.
Click to expand...
Click to collapse
Hi
I can install this, but the module does nothing, nothing is showed in recent tasks screen...
blchinezu said:
I won't add any user interface. Maybe I'll find a workaround to automatically set the offset when necessary.
Click to expand...
Click to collapse
Yes that would be more than enough!
Or if this gets too difficult you can simply make a separate version where the RAM bar is at the bottom instead of at the top! Or maybe even at the left or right. That way nothing gets overlapped
Anyways thanx!
blchinezu said:
I won't add any user interface.
Click to expand...
Click to collapse
I suppose then you won't be adding an option to move the clear all button. Would a separate package with a bottom-left button position be too excessive?
Brilliant work, either way!
This makes Google opinion force close. Disable it and it comes right up again.
Edit: I'm on vzw s3 4.1.2 rooted stock touchwiz
Sent from my SCH-I535 using Tapatalk 2
Related
ALMOST DONE!!! COMING SOON!!!!!
http://img845.imageshack.us/img845/1563/bull****.png
Follow me on Twitter!
This is a 1st Release so don't expect perfection. Just report any bugs and submit Feature Requests his in the thread. Thanks!
Mods/Themes & Other Things are in the 2nd POST!!!
Release:
Fully deodexed
Init.d Support (Big thanks to DooMLord!)
Apps_process & system_server from ICS
CM libs for smoother system and scrolling
Zipalign at boot
Custom Bootanimation
Extended Power Menu (Coming Soon! Should be in the next release! (I added quickboot for convenience) )
Hardware Accelerated Launcher
Pre-Rooted
SD-Card speed Tweak
Dual-Band Wifi Support
Ad-Hoc support and Native Tethering Enabled
GSM Phone calls Enabled
V6 Supercharger Script! Thanks to zepplinrox! His original thread is here.... http://forum.xda-developers.com/showthread.php?t=991276
Ext4 tweak (Testing)
Build.prop Edited for performance and additional options
Host files added t and faster web browsing
Added some Apps...(Titanium Backup, GoSMS, Quickboot)
way more to come...
Features to come...
Built in Extended Power Controls
Hide The Status Bar Mod (For Full Screen Viewing)
Suggestion are welcome
________________________________________
________________________________
______________________
Code:
[SIZE="5"][B][U]ChangeLog [/U][/B][/SIZE]
[B]Initial Release. (No Changelog yet...)[/B]
________________________________________
________________________________
______________________
Installation Instructions (It doesn't matter what rom you are on, it doesn't matter if you are already running my rom!!! Follow the install instructions exactly as they are written!!!)
-READ-
You must have DooMLord's Custom Recovery already! (http://forum.xda-developers.com/showthread.php?t=1418084)
And you should have already flashed DooMLord's Kernel!!! (http://forum.xda-developers.com/showthread.php?t=1426145)
1)Put rom on SD (as usual)
2)MAKE A NANDROID BACKUP IN CWM!!!
3)Backup your apps with Titaniumm Backup! Its always a good idea to save that bacukup on your PC!!!
4)Go into CWM and do a FULL-WIPE!(wipe cache partition, dalvik cache, and wipe data/factory reset!)
5)install zip
6)reboot
________________________________________
________________________________
______________________
Downloads
Mods & Themes!
Coming Soon...
Apps that were taken out of this release!Just Unzip and choose which apps you want. Use Explorer and drop them into system/app and set permissions to rw-r-r.
http://dev-host.org/869nctss8617/Apps_HTC.zip
Code:
ATT_code_scanner_vpl_1.2_aligned
ATT_FamilyMap_stub
ATT_Navigator_stub
BooksTablet
GameWorld-1.0.7
HDGames
HtcFootprints
HtcFootprintsWidget3d
HtcGreader
HtcGreaderWidget
HtcRecommends
HtcRecommendsWidget
KidMode
Kindle_STUB
LGolf2HD_HEP_HTC_Puccini_ATT_ML_102
Macleans
NFSShift_signed_submission
onDemand
PRAndroid
SoundHound_Freemium
Sportsnet
Stock
tabletv2-98_aligned
teeter
urMusic
WorldClock
YPMAndroid_VPL-release_287
ZinioReader.v1.01.3587.VPL
I'm excited for this. Waiting on the edge of my seat for a download link.
Though, I hope that it has untouched IME keyboard like the stock rom. I hate hate my roommate's Samsung stock keyboard and other android keyboards. And, I hope it still has the My ATT app, becuase I do not have unlimited data and need that app to keep track >_>;
Will edit post once I flash. ~
AT&T Data usage Widget
I have to agree, that little bugger has saved me $. If you lost all the other AT&T bloat great, but that really needs to stay!
Russ741
Russ741 said:
I have to agree, that little bugger has saved me $. If you lost all the other AT&T bloat great, but that really needs to stay!
Russ741
Click to expand...
Click to collapse
and it works with other carriers to..
Go Task!
Nice to see Task is almost done with his ROM!
Will download an install once its available
Thanks
looking fwd to seeing it Task
Any news here?
Is this ROM going to resemble a Galaxy tab since Galaxy is the title?
(And I know you have done so much work on the G tab)
Do you expect to have a 'spare parts' type of app to enable or disable things like the tablet status bar hide feature?
Good news from Task!
Thanks for the update Task
Can you include the latest version of Polaris Office please?
I tried to install the flashable zip you did for the Galaxy Tab but its not working for me.
Thanks!
sikorski said:
Thanks for the update Task
Can you include the latest version of Polaris Office please?
I tried to install the flashable zip you did for the Galaxy Tab but its not working for me.
Thanks!
Click to expand...
Click to collapse
Yeah no problem bro.
typhoonikan said:
Is this ROM going to resemble a Galaxy tab since Galaxy is the title?
(And I know you have done so much work on the G tab)
Do you expect to have a 'spare parts' type of app to enable or disable things like the tablet status bar hide feature?
Click to expand...
Click to collapse
Yeah I plan on trying to add as much as possible from my galaxy tab roms bro. Just trying to rid as much bloat as possible right now. HTC Sense is a hog!!!
task650 said:
Yeah I plan on trying to add as much as possible from my galaxy tab roms bro. Just trying to rid as much bloat as possible right now. HTC Sense is a hog!!!
Click to expand...
Click to collapse
Oh. I see. Thanks for the clarification.
I am a sense fanboy, despite its hogness. I'm sure your Rom will open the jetstream closer to its full potential, but I am looking to stay with the sense UI, personally. That's why i bought jetstream, not a galaxy tab.
testing...testing and more testing
I am testing Task's ROM, only has a few bugs to work out and none of them are show stoppers.
I will post some additional notes later.
Russ
+1 I agree with Typhoonikan
I like alot what HTC has done with sense, I like it so much that I sold my Galaxy Tab to get the Jetstream!
I know Task can help have a better and faster experience with Sense.
typhoonikan said:
Oh. I see. Thanks for the clarification.
I am a sense fanboy, despite its hogness. I'm sure your Rom will open the jetstream closer to its full potential, but I am looking to stay with the sense UI, personally. That's why i bought jetstream, not a galaxy tab.
Click to expand...
Click to collapse
Russ741 said:
I am testing Task's ROM, only has a few bugs to work out and none of them are show stoppers.
I will post some additional notes later.
Russ
Click to expand...
Click to collapse
Awesome. I didn't know you were one of the testers. Yeah that one is just the basic version. Once I fix the bugs you mentioned in the log I'm going to add a bunch of things that should push it pretty good. I'm definitely going to keep sense but try to thin it out a little so that it doesn't hog as much of the resources and speed the whole rom up.
task650 said:
Awesome. I didn't know you were one of the testers. Yeah that one is just the basic version. Once I fix the bugs you mentioned in the log I'm going to add a bunch of things that should push it pretty good. I'm definitely going to keep sense but try to thin it out a little so that it doesn't hog as much of the resources and speed the whole rom up.
Click to expand...
Click to collapse
I think I am the ONLY AT&T tester!
Post a new beta and I will give it a go. Just please fix the power off issue, really annoying even in testing!
Russ741
Russ741 said:
I think I am the ONLY AT&T tester!
Post a new beta and I will give it a go. Just please fix the power off issue, really annoying even in testing!
Russ741
Click to expand...
Click to collapse
Yeah I think I just fixed the power down issue. I didn't notice it because I've been using quickboot. Should have another test for you tonight if I get off work early enough.
Tester
@Task
If you need more Beta Testers I will be glad to help...
sikorski said:
@Task
If you need more Beta Testers I will be glad to help...
Click to expand...
Click to collapse
Alright cool. I'll shoot you a link when I finish. Probably tonight or tomorrow bro.
Hi,
There is a package in Spike's thread for v5.0 for the battery percentage. My question is, can that be installed on v6.1?
vickyrao said:
Hi,
There is a package in Spike's thread for v5.0 for the battery percentage. My question is, can that be installed on v6.1?
Click to expand...
Click to collapse
v6 is a different base. So maybe wait for him to come out with one for v6 first. Should be any day now.
Elisha said:
v6 is a different base. So maybe wait for him to come out with one for v6 first. Should be any day now.
Click to expand...
Click to collapse
Thanks for the answer...
btw i have a little more questions...
after using v6.1... i realise that i am no longer able to take screenshots on my sgs2. the home + power button does not seem to work. is there a different way on this rom to take screenshots? or need another app?
also is there a way to remove homescreens? by default it has 5 screens, can i disable one or more of it?
last question, how do i configure to set the USB connect on default as usb storage instead of media server?
UPDATE: seems like the battery percentage for 6.1 is released: http://forum.xda-developers.com/showpost.php?p=22790151&postcount=492
vickyrao said:
Thanks for the answer...
btw i have a little more questions...
after using v6.1... i realise that i am no longer able to take screenshots on my sgs2. the home + power button does not seem to work. is there a different way on this rom to take screenshots? or need another app?
also is there a way to remove homescreens? by default it has 5 screens, can i disable one or more of it?
last question, how do i configure to set the USB connect on default as usb storage instead of media server?
UPDATE: seems like the battery percentage for 6.1 is released: http://forum.xda-developers.com/showpost.php?p=22790151&postcount=492
Click to expand...
Click to collapse
I really missed the days i can take a screenshot just with home + power buttons .Now i'm using a app to take screedshots(do a search in the market then you'll find many). Hope the CM9 team intergrate Screenshots in their work.
Are you using Trebuchet launcher ? If so you'll find the homescreed settings in Trebucher settings(press menu key in homescreen and select Trebucher settings) .
The media server is annoying to me too but now i'm trying to get used to it.Maybe you can try this out: http://forum.xda-developers.com/showthread.php?t=1389375
nekoworkshop said:
I really missed the days i can take a screenshot just with home + power buttons .Now i'm using a app to take screedshots(do a search in the market then you'll find many). Hope the CM9 team intergrate Screenshots in their work.
Are you using Trebuchet launcher ? If so you'll find the homescreed settings in Trebucher settings(press menu key in homescreen and select Trebucher settings) .
The media server is annoying to me too but now i'm trying to get used to it.Maybe you can try this out: http://forum.xda-developers.com/showthread.php?t=1389375
Click to expand...
Click to collapse
thanks to your reply i now know about trebuchet. now that helps me to reduce those unused homescreens. but some of the options does not work such as Dock and Icons. Ill have to start googling about this anyways...
but yeah i hope spike will add the screenshot. i dont want an app for that. better to intergrate it with the rom i think.
SPIKE, if you see this, i sincerely thank you for this awesome ROM. you have done great. I am loving every bit of it. thank you!
Guys,
I was reading the development thread, and now there is a 6.1 version. Somebody said that he updated from ROM 2.3.6 to Pure ICS 6.0...
I would like to be sure if this can really be done without having to install stock ROM first or something like that. I have stock ROM 2.3.5 with root, and I would like to know whether I can go straight to flashing Pure ICS 6.1 with Odin or not.
I am asking cause I have seen many different comments on approaches people have followed, and I want to know whether I can do this first or not.
Thanks!
The trebuchet is far from complete and still under development(pretty stable for a alpha release ,though). You can have a try at Nova launcher and see if it fits you.
---------- Post added at 07:22 PM ---------- Previous post was at 06:51 PM ----------
I suggest you flash a sammy leak ICS ROM first , it won't take you so much time.
cvillalta said:
Guys,
I was reading the development thread, and now there is a 6.1 version. Somebody said that he updated from ROM 2.3.6 to Pure ICS 6.0...
I would like to be sure if this can really be done without having to install stock ROM first or something like that. I have stock ROM 2.3.5 with root, and I would like to know whether I can go straight to flashing Pure ICS 6.1 with Odin or not.
I am asking cause I have seen many different comments on approaches people have followed, and I want to know whether I can do this first or not.
Thanks!
Click to expand...
Click to collapse
There should not be any issues. I flashed straight to 6.1 from a stock official release of 2.3.6. worked fine for me. did not have issues. just make sure to follow the steps provided carefully.
nekoworkshop said:
The trebuchet is far from complete and still under development(pretty stable for a alpha release ,though). You can have a try at Nova launcher and see if it fits you.
---------- Post added at 07:22 PM ---------- Previous post was at 06:51 PM ----------
I suggest you flash a sammy leak ICS ROM first , it won't take you so much time.
Click to expand...
Click to collapse
ok ill try nova launcher. about the flash sammy leak ics rom, you are refering to cvillalta's post right and not mine right?
update: if yes, then below link probably will be helpful?
http://androidadvices.com/update-samsung-galaxy-gt-i9100-xxlph-android-403-firmware/2/
I just flashed Pure Special Edition straight from one of the KI or KJs, everything works ok (Great rom btw) but I noticed the colors are slightly off. Almost like overexposure?
The color looks slightly faded and runny in and is quite obvious in videos and games. Wonder what's the issue here? should I reflash?
Cheers
Check Display - Screen Mode to see what it is set as. It is in Settings. You can make or more punchy there.
Sent from my GT-I9100 using Tapatalk
Elisha said:
Check Display - Screen Mode to see what it is set as. It is in Settings. You can make or more punchy there.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Screen Mode was set to Standard, and setting it to anything else make it look worse... However, the screen did look slightly better once I turned off auto brightness and adjusted it manually. Totally forgot that ICS had a problem with this!
However, I noticed that stuff like font edges isn't as sharp as when I was running stock. I guess I'll flash stock ICS tonight to check what the problem is...
pure ics 5.0 vs 7.1 battery life.
Hello. Why is my battery life 100% better with Pure ICS v. 5.0 than 7.1? is there a way to make 7.1 as great (im my opinion) in terms of battery life as 5.0? of course 7.1 is fully functional and I would like to keep it.
Thanks.
Transparent lockscreen
Hi all,
Does anyone know if spike is planning to get rid of the samsung lockscreen?
It would be so much nicer to have the stock transparent lockscreen as on the galaxy nexus.
Hopefully it will come round with 7.3.
For those who want to install AOSP Calendar in Spike 7.2, maybe can try flash AOSP Package for Pure ICS v7.0
ICS call screen
I wanted to know if there are plans to incorporate the in call screen from ICS into this ROM? I switched from CM9 to Pure ICS and so far it's the only thing about CM9 that I prefer.
You can ignore my above post, apparently this is a future theme change. Looking forward to when it actually gets implemented.
To be clear, these will only work for AOSP ROMs and the GoogleEdition ROM.
Threw these together for myself. Love having the navbar but it is a pain to add every nightly I flash. So I threw this together. I made two versions. One simply adds the navbar and disables the capacitive menu and back buttons (with them active the navbar becomes nearly impossible to use) and triggers the navbar. Fear not, this mod triggers the in app menu overflow access and for that matter you could then create a menu on the navbar. I couldn't automate disabling the backlight so that will still need to be disabled via settings>advanced>sensors. I also made a version that changes the device DPI from 480 to 360 (my preferred DPI).
Download - AOSP_navbar_enabled.v3.zip
Base version above now allows OTA survival. Will reapply itself after each nightly.
Download - AOSP_navbar_enable_360dpi.zip
Download - AOSP_remove_NAVBAR.v3.zip
Here is the method to inject changed into the build.prop that I used (found here)
On the GoogleEdition ROM it does not support disabling the capacitive button backlights natively so the app from the following thread is needed
[APP] Google Edition ROMs - Disable Button Lights
Thanks a million times for this! I have been missing these! I am running beans rom and after installing getting system UI has stopped, also using nova, any information on getting this going would be great, thanks again!
templton said:
Thanks a million times for this! I have been missing these! I am running beans rom and after installing getting system UI has stopped, also using nova, any information on getting this going would be great, thanks again!
Click to expand...
Click to collapse
Guess I wasn't clear. This is for AOSP ROMS only. I will edit the OP, sorry for the confusion.
Sent from my Nexus 7 using Tapatalk 2
Ah no no, my fault! I see it right in the first line! I wasn't paying attention or must have been half asleep!! Thanks again though :good:
templton said:
Ah no no, my fault! I see it right in the first line! I wasn't paying attention or must have been half asleep!! Thanks again though :good:
Click to expand...
Click to collapse
No I want very clear. I added the first line after your misunderstanding.
Sent from my Galaxy S4
Sorry but...How do you install this?
I tried looking for instructions...There are none.
chris2k5 said:
Sorry but...How do you install this?
I tried looking for instructions...There are none.
Click to expand...
Click to collapse
They are recovery flashable mods. Download, reboot recovery, install zip (no wipes needed), enjoy!
Sent from my Galaxy S4
The link for the remove navbar mod doesn't work. Does anyone have the .zip file?
chris2k5 said:
The link for the remove navbar mod doesn't work. Does anyone have the .zip file?
Click to expand...
Click to collapse
It works fine for me on my phone and chrome browser, I don't know why you are having trouble. Try this instead
https://copy.com/JcV4Z <---remove navbar
Sent from my Galaxy S4
A fixed navbar taking up space precious on a small display seems Nexus- like. Stop this abomination NOW! Instant S4 mini (comparable display space usable for apps).
rushless said:
A fixed navbar taking up space precious on a small display seems Nexus- like. Stop this abomination NOW! Instant S4 mini (comparable display space usable for apps).
Click to expand...
Click to collapse
Of course you are welcome to your opinion!! And in part I agree. That is why I run at 360dpi, that way it has less of an impact on the display. I know it is not for everyone, but choice is the spice of life.
hlxanthus said:
Of course you are welcome to your opinion!! And in part I agree. That is why I run at 360dpi, that way it has less of an impact on the display. I know it is not for everyone, but choice is the spice of life.
Click to expand...
Click to collapse
Thanks for this. Is it possible to only activate the in app menu overflow without adding the nav bar? It's so much more intuitive to have that, rather than guessing whether or not the menu button will do anything within each app (the whole reason google got rid of the menu button in the first place).
I wish I knew how!! To be frank, when you enable the navbar and disable the capacitive buttons it activates the menu overflow within apps all by itself. Must be part of the navbar framework. But let me look into it. I MIGHT have an idea but it would be ROM specific, not a general mod like this. What ROM are you running or would like such a feature for?
Sent from my Galaxy S4
hlxanthus said:
I wish I knew how!! To be frank, when you enable the navbar and disable the capacitive buttons it activates the menu overflow within apps all by itself. Must be part of the navbar framework. But let me look into it. I MIGHT have an idea but it would be ROM specific, not a general mod like this. What ROM are you running or would like such a feature for?
Sent from my Galaxy S4
Click to expand...
Click to collapse
Running both the Verizon Google Edition ported rom and Clean Rom. Appreciate it, but don't bother putting time into it if it's ROM specific. What you have posted here already is helpful enough!
johnfoam said:
Running both the Verizon Google Edition ported rom and Clean Rom. Appreciate it, but don't bother putting time into it if it's ROM specific. What you have posted here already is helpful enough!
Click to expand...
Click to collapse
I will try for the GE port, it should be an easy mod. These don't work on stock touchwiz as it doesn't have the needed framework for the navbar. For some reason Samsung gutted the navbar from their source
Sent from my Galaxy S4
hlxanthus said:
I will try for the GE port, it should be an easy mod. These don't work on stock touchwiz as it doesn't have the needed framework for the navbar. For some reason Samsung gutted the navbar from their source
Sent from my Galaxy S4
Click to expand...
Click to collapse
Sounds good. Appreciate it!
johnfoam said:
Sounds good. Appreciate it!
Click to expand...
Click to collapse
Merry Xmas. I also posted this over in the GoogleEditionVZW thread
Download - GoogleEditionVZW_3dot.menu.overflow.zip
hlxanthus said:
Merry Xmas. I also posted this over in the GoogleEditionVZW thread
Download - GoogleEditionVZW_3dot.menu.overflow.zip
Click to expand...
Click to collapse
Thank you my friend, I'll give it shot today!
Oh it works very nice, but there are some cases (like tapatalk) where the menu would instead be within the navbar so this is not a capacitive menu replacement
Sent from my Galaxy S4
Awesome job man. Now I just need to be able to set the physical home button to menu for short press and go full screen (no navigation lights) on long press. Think that is possible?
Sent from my SGH-M919 using xda premium
Hi xda-community,
I would like to share my first (and extremly simple ) Xposed module with you.
This module allows you to slide before you have to draw/type in your security pattern/pin/whatever. It is particularly useful if you use CyanogenMod (or other ROMs, that allow App shortcuts in lockscreens) and want to use both shortcuts AND a security pattern/pin/whatever. It works similiar to HTC's Sense UI (3.x).
ROMs modified by manufacturers are known to have issues with this module (see below).
Code:
You install and use this module at your own risk!
I am not responsible for any damage it might cause to your beloved device!
Please note, that there is a sad bug present by using App shortcuts (in CM etc.) in lockscreen, which decreases the usability: You have to "unlock" your device with your pattern/pin/whatever twice. If you just unlock you don't have to do it twice. Therefore I rate this module as alpha. I would be very happy if someone has a solution to this problem .
Supported ROMs
TESTED and CONFIRMED WORKING:
AOSP:
- 4.3 (JellyBean)
- 4.4 (KitKat)
AOSP based:
- CM 10.2 (JellyBean 4.3)
Stock/OEM ROMs:
- Asus: 4.2 (JellyBean)
- Sony Xperia: 4.2 (JellyBean) - 4.4 (KitKat)
Should work on:
- 4.2+ (JellyBean) (lockscreen has been overhauled in 4.2, therefore no <= 4.1)
- 4.4 (KitKat)
- all AOSP based ROMs (CM, AOKP, Para, etc.) with Android 4.2+
Unsupported/problematic ROMs
ROMs modified by manufacturers are known to have issues with this module:
Samsung (TouchWiz):
- 4.2/4.3: simply does not work
- 4.4: has less issues, see http://forum.xda-developers.com/showpost.php?p=51980630&postcount=52
Credits
@rovo89 Your framework is amazing!
Known bugs
- Using app shortcuts causes you to "unlock" your device twice (see above)
- App shortcut to browser does not work (needs confirmation..)
How to use
1. Install Xposed framework as described here
2. Download and install XLockSecuritySlide via Xposed Installer (or see below)
3. Enable XLockSecuritySlide in Xposed Installer
4. Reboot and enjoy!
HELP ME!
If something went wrong (e. g. unlockable device) you can use the flashable Xposed recovery disabler ZIP (see attachment of that post!), which disables Xposed and therefore this module. After that you can safely disable/uninstall this module and re-enable Xposed again!
Download
Xposed repository (http://repo.xposed.info/module/de.stevolk.xlocksecurityslide)
OR
see attachments
Source code
Release under Apache License 2.0: github
Changelog
0.4 (2014/04/15)
Compatiblity with Sony Xperia ROMs (Thanks to @greg2001!)
0.3 (2014/01/29)
Fixed security mode bypass by pressing back button
Fixed "popup" security mode; it is the normal one now
0.2 (2014/01/28)
Fix for KitKat
0.1 (2014/01/27)
initial release
Will this work on a Samsung Galaxy S4 (TouchWiz based ROM)?
Joe0113 said:
Will this work on a Samsung Galaxy S4 (TouchWiz based ROM)?
Click to expand...
Click to collapse
I don't know it exactly, but I think it could work if Samsung hasn't heavily customized the lockscreen code. I do not have a way to test it out, so I would appreciate you testing it
Tested on Validus13 KK.....no go. Thanks for the work and sharing with the rest of us
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
not work on TouchWiz 4.3 on galaxy s4
badkill said:
not work on TouchWiz 4.3 on galaxy s4
Click to expand...
Click to collapse
No go on tw 4.3 Samsung s3
Sent from my SCH-I535 using Tapatalk
Damn!
Anyway you could make it work on TouchWiz (GS4; Android 4.3)?! @Stevolk
jasvncnt1 said:
Tested on Validus13 KK.....no go. Thanks for the work and sharing with the rest of us
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
KK fix released. Should work now. :cyclops:
Joe0113 said:
Damn!
Anyway you could make it work on TouchWiz (GS4; Android 4.3)?! @Stevolk
Click to expand...
Click to collapse
Well thats really sad... The problem is, that I do not have a Samsung device to test it out. Moreover it requires some work because TW is closed source. I will look at this, if I have enough time!
@Stevolk bro It is working fine:good: in my Xperia ZR running Stock 4.3 Jelly bean. but there is a small bug . The Xperia swipe screen is fine, but the pattern screen becomes black, I approximately need to draw the pattern in order to unlock the screen. But when I enable AOSP lockscreen using GEM Xposed module, both AOSP lock screen & pattern lockscreen is working fine :victory:. Thanks for you work. Screens attached for your info
Sorry for my bad English:angel:
Omg, thanks you so much , finaly someone made it, was missing this feature since gb !
(Nexus 4, 4.4.2)
Great module, works as expected on my HTC One X+ with CM11 android 4.4.2 but after switching to an other security while the module was active (from password to pin in my case) the phone soft rebooted upon sliding the slider again.
anthonythangaraj said:
@Stevolk bro It is working fine:good: in my Xperia ZR running Stock 4.3 Jelly bean. but there is a small bug . The Xperia swipe screen is fine, but the pattern screen becomes black, I approximately need to draw the pattern in order to unlock the screen. But when I enable AOSP lockscreen using GEM Xposed module, both AOSP lock screen & pattern lockscreen is working fine :victory:. Thanks for you work. Screens attached for your info
Sorry for my bad English:angel:
Click to expand...
Click to collapse
Hm.. it seems, that my module isn't compatible with OEM customized lockscreens, TouchWiz does also have issues. I updated the first post with this information.
If I have time, I'll have a look but it has low priority.
SerkSerk said:
Omg, thanks you so much , finaly someone made it, was missing this feature since gb !
(Nexus 4, 4.4.2)
Click to expand...
Click to collapse
I was annoyed, that no module existed with this functionality so I made one myself The only thing that isn't working correctly (except from compatibility with non-AOSP lockscreens like TouchWiz) is the double answering of security method if you use app shortcuts.
Ranomez said:
Great module, works as expected on my HTC One X+ with CM11 android 4.4.2 but after switching to an other security while the module was active (from password to pin in my case) the phone soft rebooted upon sliding the slider again.
Click to expand...
Click to collapse
Hm.. that is strange. I cannot reproduce this in AOSP 4.4.2 so far. Does it soft-reboot only one time after you switched the method or multiple times? Could you attach a logcat maybe?
0.2 does not work on LG Optimus G, stock 4.1.2 (bummer!), but works perfectly on Asus Memo Pad HD 7, stock 4.2.2 (yay!). Thanks a lot for this! Have been missing this feature since Disaster ROM on my previous SGS2...
kt-Froggy said:
0.2 does not work on LG Optimus G, stock 4.1.2 (bummer!), but works perfectly on Asus Memo Pad HD 7, stock 4.2.2 (yay!). Thanks a lot for this! Have been missing this feature since Disaster ROM on my previous SGS2...
Click to expand...
Click to collapse
Thanks for your feedback!
Any Android version below 4.2 is not supported because the lockscreen code has been heavily restructured in 4.2
Finally a stock ROM that works! :good:
Stevolk said:
Thanks for your feedback!
Any Android version below 4.2 is not supported because the lockscreen code has been heavily restructured in 4.2
Click to expand...
Click to collapse
Ahh, OK, I should have read the OP more carefully... Makes sense. Thanks!
Finally a stock ROM that works! :good:
Click to expand...
Click to collapse
I can only guess that's because Asus didn't make a lot of customizations to the vanilla Android -- some, but not much... For example, TouchWiz or Sense are way more heavily customized in every aspect. I can say that other Xposed modules that are originally designed for AOSP ROMs actually work much better on my Asus tablet than on other devices, like Samsung or LG (I am talking about stock ROMs).
Okay..big bug spotted
After swiping to get the pin/password/whatever if you hit the back button the security screen just disappears and the device is unlocked making the lock actually useless as it gets bypassed..
Can anyone else confirm this?
If so.. Dev please try to fix it ASAP
Sent from my Xperia S using Tapatalk
amey_gangal said:
Okay..big bug spotted
After swiping to get the pin/password/whatever if you hit the back button the security screen just disappears and the device is unlocked making the lock actually useless as it gets bypassed..
Can anyone else confirm this?
Click to expand...
Click to collapse
On my tablet, the on-screen Back button doesn't activate until the device is actually unlocked, so, no bug for me (can't bypass the lock screen). Could be different with hardware nav buttons...
Okay so apparently only the people with hardware buttons may see this happen
Sent from my Xperia S using Tapatalk
amey_gangal said:
Okay..big bug spotted
After swiping to get the pin/password/whatever if you hit the back button the security screen just disappears and the device is unlocked making the lock actually useless as it gets bypassed..
Can anyone else confirm this?
If so.. Dev please try to fix it ASAP
Sent from my Xperia S using Tapatalk
Click to expand...
Click to collapse
I found that happening on mine when I swiped across the camera then hit back to get out of it but I just tried swiping to get the pin then hitting back and it is unlocking like yours is. I'm on a Note 3 on 4.4.2.
thanks a lot for this
suggestion :-
when we slide then the secured lock comes in a box [See Screenshot 1]..can it be made to come in normal way [See Screenshot 2]
Disable Samsung MissedEvent Widget
*This module is meant for Samsung TouchWiz ROMs
This module disables the Samsung stock widget for missed calls/sms that shows in lockscreen.
It has been tested on Galaxy S4 with KitKat but it should works with previous versions of Android.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Write here if you have any problem!
invano said:
Disable Samsung MissedEvent Widget
*This module is meant for Samsung TouchWiz ROMs
This module disables the Samsung stock widget for missed calls/sms that shows in lockscreen.
It has been tested on Galaxy S4 with KitKat but it should works with previous versions of Android.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Write here if you have any problem!
Click to expand...
Click to collapse
Thanks bro for making touchwiz modules !
can you make a module that removes the date that appears when viewing the photos in the stock gallery ? That would be really useful.
thanks.
ayoubij said:
Thanks bro for making touchwiz modules !
can you make a module that removes the date that appears when viewing the photos in the stock gallery ? That would be really useful.
thanks.
Click to expand...
Click to collapse
You are welcome but please use the thread for requests
@invano you are my hero.
Ever since I upgraded to KitKat there are 3 modules that I missed.
1. Maximize widgets on lockscreen:- Source
2. Multiple Widgets and Camera on secure lockscreen:- Source
3. Disable Samsung Notifications Widget:- Source
Now I don't have to worry about #3 since you made this awesome module :good::good:
But is there anyway you can make #2 compatible with KK? (After installation I get option to add widgets on secured lockscreen but they wont stick..so it looks there needs to minor code changes to make it compatible with KK)
And also #1 was made compatible with KK a while ago but it would be awesome if you could look at the source and see if you can make any improvements to it
Walter.White said:
But is there anyway you can make #2 compatible with KK? (After installation I get option to add widgets on secured lockscreen but they wont stick..so it looks there needs to minor code changes to make it compatible with KK)
And also #1 was made compatible with KK a while ago but it would be awesome if you could look at the source and see if you can make any improvements to it
Click to expand...
Click to collapse
Don't worry, they will be KK compatible. It's just matter of time I think.
is there any other way to disable this? I remember on JB I did not install such a module
---------- Post added 19th March 2014 at 12:29 AM ---------- Previous post was 18th March 2014 at 11:41 PM ----------
@invano just to check.. I see that you use DashClock as your lockscreen widget.. are you able to swipe left to add more widgets.?
can we remove the add more widgets screen?
wilflare said:
is there any other way to disable this? I remember on JB I did not install such a module
---------- Post added 19th March 2014 at 12:29 AM ---------- Previous post was 18th March 2014 at 11:41 PM ----------
@invano just to check.. I see that you use DashClock as your lockscreen widget.. are you able to swipe left to add more widgets.?
can we remove the add more widgets screen?
Click to expand...
Click to collapse
I made this module because there is no possibility to disable the samsung widget a part from modifying some smali code.
Inviato dal mio iPad utilizzando Tapatalk
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
If your module can allow us to remove the add widget screen... it would be awesome
wilflare said:
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
If your module can allow us to remove the add widget screen... it would be awesome
Click to expand...
Click to collapse
actually its " KeyguardSPlannerWidget"....but thanks for this info....been trying to get rid of that
wilflare said:
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
Click to expand...
Click to collapse
Of course by removing particular apks you obtain the same behavior...but what about stability, splanner o something else?
I made this module because I prefer to hook a particular method rather than disabling applications that could come back useful in a near future.
Everyone is free to choose what he likes best
wilflare said:
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
If your module can allow us to remove the add widget screen... it would be awesome
Click to expand...
Click to collapse
JB 4.2 doesn't have an SPlannerKeyguardWidget.apk only KeyguardWidget.apk which, presumably, is the lockscreen widgets as a whole, so uninstalling is not an option.
Edit: The other one that @louforgiveno mentioned is also not present.
Sent from: SGS2 - JB 4.1.2 GB27 / SGS4 - JB 4.2.2 MF9
invano said:
Disable Samsung MissedEvent Widget
*This module is meant for Samsung TouchWiz ROMs
This module disables the Samsung stock widget for missed calls/sms that shows in lockscreen.
It has been tested on Galaxy S4 with KitKat but it should works with previous versions of Android.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Write here if you have any problem!
Click to expand...
Click to collapse
GRAZIE!!!! :victory:
xdapao3 said:
GRAZIE!!!! :victory:
Click to expand...
Click to collapse
I'm a bit late (I didn't see the notifications... ) ..anyway you're welcome!
not working for me on note 2 4.4.2 Ditto ROM
poison_snake said:
not working for me on note 2 4.4.2 Ditto ROM
Click to expand...
Click to collapse
Its working for me..
Sent from a DN3 V4 powered Note2. Peace✌
Can you please make this compatible with the Galaxy S5?! @invano
Joe0113 said:
Can you please make this compatible with the Galaxy S5?! @invano
Click to expand...
Click to collapse
This
GS5 Towel Rooted
I installed this on my SGSV and i thought it had worked.
But im now getting missed notifcations on my lock screen again.
Was i imagining things?
I desperatly need this ! Though it didnt work on my rooted s5 stock rom .. Strange all mods from xposed work without any problem ..
Any solution ?
OP hasn't posted in here for over a month.
Here's hoping its because he's busy working on a fix for the S5.
Sent from my SM-G900I using XDA Premium 4 mobile app