Hi xda-community,
I would like to share my first (and extremly simple ) Xposed module with you.
This module allows you to slide before you have to draw/type in your security pattern/pin/whatever. It is particularly useful if you use CyanogenMod (or other ROMs, that allow App shortcuts in lockscreens) and want to use both shortcuts AND a security pattern/pin/whatever. It works similiar to HTC's Sense UI (3.x).
ROMs modified by manufacturers are known to have issues with this module (see below).
Code:
You install and use this module at your own risk!
I am not responsible for any damage it might cause to your beloved device!
Please note, that there is a sad bug present by using App shortcuts (in CM etc.) in lockscreen, which decreases the usability: You have to "unlock" your device with your pattern/pin/whatever twice. If you just unlock you don't have to do it twice. Therefore I rate this module as alpha. I would be very happy if someone has a solution to this problem .
Supported ROMs
TESTED and CONFIRMED WORKING:
AOSP:
- 4.3 (JellyBean)
- 4.4 (KitKat)
AOSP based:
- CM 10.2 (JellyBean 4.3)
Stock/OEM ROMs:
- Asus: 4.2 (JellyBean)
- Sony Xperia: 4.2 (JellyBean) - 4.4 (KitKat)
Should work on:
- 4.2+ (JellyBean) (lockscreen has been overhauled in 4.2, therefore no <= 4.1)
- 4.4 (KitKat)
- all AOSP based ROMs (CM, AOKP, Para, etc.) with Android 4.2+
Unsupported/problematic ROMs
ROMs modified by manufacturers are known to have issues with this module:
Samsung (TouchWiz):
- 4.2/4.3: simply does not work
- 4.4: has less issues, see http://forum.xda-developers.com/showpost.php?p=51980630&postcount=52
Credits
@rovo89 Your framework is amazing!
Known bugs
- Using app shortcuts causes you to "unlock" your device twice (see above)
- App shortcut to browser does not work (needs confirmation..)
How to use
1. Install Xposed framework as described here
2. Download and install XLockSecuritySlide via Xposed Installer (or see below)
3. Enable XLockSecuritySlide in Xposed Installer
4. Reboot and enjoy!
HELP ME!
If something went wrong (e. g. unlockable device) you can use the flashable Xposed recovery disabler ZIP (see attachment of that post!), which disables Xposed and therefore this module. After that you can safely disable/uninstall this module and re-enable Xposed again!
Download
Xposed repository (http://repo.xposed.info/module/de.stevolk.xlocksecurityslide)
OR
see attachments
Source code
Release under Apache License 2.0: github
Changelog
0.4 (2014/04/15)
Compatiblity with Sony Xperia ROMs (Thanks to @greg2001!)
0.3 (2014/01/29)
Fixed security mode bypass by pressing back button
Fixed "popup" security mode; it is the normal one now
0.2 (2014/01/28)
Fix for KitKat
0.1 (2014/01/27)
initial release
Will this work on a Samsung Galaxy S4 (TouchWiz based ROM)?
Joe0113 said:
Will this work on a Samsung Galaxy S4 (TouchWiz based ROM)?
Click to expand...
Click to collapse
I don't know it exactly, but I think it could work if Samsung hasn't heavily customized the lockscreen code. I do not have a way to test it out, so I would appreciate you testing it
Tested on Validus13 KK.....no go. Thanks for the work and sharing with the rest of us
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
not work on TouchWiz 4.3 on galaxy s4
badkill said:
not work on TouchWiz 4.3 on galaxy s4
Click to expand...
Click to collapse
No go on tw 4.3 Samsung s3
Sent from my SCH-I535 using Tapatalk
Damn!
Anyway you could make it work on TouchWiz (GS4; Android 4.3)?! @Stevolk
jasvncnt1 said:
Tested on Validus13 KK.....no go. Thanks for the work and sharing with the rest of us
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
KK fix released. Should work now. :cyclops:
Joe0113 said:
Damn!
Anyway you could make it work on TouchWiz (GS4; Android 4.3)?! @Stevolk
Click to expand...
Click to collapse
Well thats really sad... The problem is, that I do not have a Samsung device to test it out. Moreover it requires some work because TW is closed source. I will look at this, if I have enough time!
@Stevolk bro It is working fine:good: in my Xperia ZR running Stock 4.3 Jelly bean. but there is a small bug . The Xperia swipe screen is fine, but the pattern screen becomes black, I approximately need to draw the pattern in order to unlock the screen. But when I enable AOSP lockscreen using GEM Xposed module, both AOSP lock screen & pattern lockscreen is working fine :victory:. Thanks for you work. Screens attached for your info
Sorry for my bad English:angel:
Omg, thanks you so much , finaly someone made it, was missing this feature since gb !
(Nexus 4, 4.4.2)
Great module, works as expected on my HTC One X+ with CM11 android 4.4.2 but after switching to an other security while the module was active (from password to pin in my case) the phone soft rebooted upon sliding the slider again.
anthonythangaraj said:
@Stevolk bro It is working fine:good: in my Xperia ZR running Stock 4.3 Jelly bean. but there is a small bug . The Xperia swipe screen is fine, but the pattern screen becomes black, I approximately need to draw the pattern in order to unlock the screen. But when I enable AOSP lockscreen using GEM Xposed module, both AOSP lock screen & pattern lockscreen is working fine :victory:. Thanks for you work. Screens attached for your info
Sorry for my bad English:angel:
Click to expand...
Click to collapse
Hm.. it seems, that my module isn't compatible with OEM customized lockscreens, TouchWiz does also have issues. I updated the first post with this information.
If I have time, I'll have a look but it has low priority.
SerkSerk said:
Omg, thanks you so much , finaly someone made it, was missing this feature since gb !
(Nexus 4, 4.4.2)
Click to expand...
Click to collapse
I was annoyed, that no module existed with this functionality so I made one myself The only thing that isn't working correctly (except from compatibility with non-AOSP lockscreens like TouchWiz) is the double answering of security method if you use app shortcuts.
Ranomez said:
Great module, works as expected on my HTC One X+ with CM11 android 4.4.2 but after switching to an other security while the module was active (from password to pin in my case) the phone soft rebooted upon sliding the slider again.
Click to expand...
Click to collapse
Hm.. that is strange. I cannot reproduce this in AOSP 4.4.2 so far. Does it soft-reboot only one time after you switched the method or multiple times? Could you attach a logcat maybe?
0.2 does not work on LG Optimus G, stock 4.1.2 (bummer!), but works perfectly on Asus Memo Pad HD 7, stock 4.2.2 (yay!). Thanks a lot for this! Have been missing this feature since Disaster ROM on my previous SGS2...
kt-Froggy said:
0.2 does not work on LG Optimus G, stock 4.1.2 (bummer!), but works perfectly on Asus Memo Pad HD 7, stock 4.2.2 (yay!). Thanks a lot for this! Have been missing this feature since Disaster ROM on my previous SGS2...
Click to expand...
Click to collapse
Thanks for your feedback!
Any Android version below 4.2 is not supported because the lockscreen code has been heavily restructured in 4.2
Finally a stock ROM that works! :good:
Stevolk said:
Thanks for your feedback!
Any Android version below 4.2 is not supported because the lockscreen code has been heavily restructured in 4.2
Click to expand...
Click to collapse
Ahh, OK, I should have read the OP more carefully... Makes sense. Thanks!
Finally a stock ROM that works! :good:
Click to expand...
Click to collapse
I can only guess that's because Asus didn't make a lot of customizations to the vanilla Android -- some, but not much... For example, TouchWiz or Sense are way more heavily customized in every aspect. I can say that other Xposed modules that are originally designed for AOSP ROMs actually work much better on my Asus tablet than on other devices, like Samsung or LG (I am talking about stock ROMs).
Okay..big bug spotted
After swiping to get the pin/password/whatever if you hit the back button the security screen just disappears and the device is unlocked making the lock actually useless as it gets bypassed..
Can anyone else confirm this?
If so.. Dev please try to fix it ASAP
Sent from my Xperia S using Tapatalk
amey_gangal said:
Okay..big bug spotted
After swiping to get the pin/password/whatever if you hit the back button the security screen just disappears and the device is unlocked making the lock actually useless as it gets bypassed..
Can anyone else confirm this?
Click to expand...
Click to collapse
On my tablet, the on-screen Back button doesn't activate until the device is actually unlocked, so, no bug for me (can't bypass the lock screen). Could be different with hardware nav buttons...
Okay so apparently only the people with hardware buttons may see this happen
Sent from my Xperia S using Tapatalk
amey_gangal said:
Okay..big bug spotted
After swiping to get the pin/password/whatever if you hit the back button the security screen just disappears and the device is unlocked making the lock actually useless as it gets bypassed..
Can anyone else confirm this?
If so.. Dev please try to fix it ASAP
Sent from my Xperia S using Tapatalk
Click to expand...
Click to collapse
I found that happening on mine when I swiped across the camera then hit back to get out of it but I just tried swiping to get the pin then hitting back and it is unlocking like yours is. I'm on a Note 3 on 4.4.2.
thanks a lot for this
suggestion :-
when we slide then the secured lock comes in a box [See Screenshot 1]..can it be made to come in normal way [See Screenshot 2]
Related
Description
Here's another feature I extracted from the GravityBox Xposed Module.
The module adds a bar at the top of recent tasks screen showing the amount of used/free RAM.
Requirements:
Xposed Recent Tasks RAM should work on any device having Xposed 2.1 or greater and Android 4.1 or greater (google based rom.. as mentioned in the GravityBox post "pure or close to pure Android").
Tested on
- Samsung Galaxy Ace S5830 with Android 4.3 (teuf3l)
- Samsung Galaxy S with HellyBean (a fork of Cyanogenmod 10.2 - Android 4.3) and Xposed 2.3.1. (myself)
- Samsung Galaxy S3 with 4.1.2 Touchwiz ROM (SuperSmashedBro)
- Samsung Galaxy S4 with WanamLite 1.5 XXUBMH1 Android 4.2.2 (TouchWizz Rom) (yurividal)
Thanks
To C3C076 for his open source development.
Download
From the bottom of this post or from the Xposed Repository.
Update: v1.1
Fixed the number formatting issue (Reported by yurividal)
Thank You!!! I have been waiting for this a long time! I had also requested Wanam to Add it on His WanamXposed. Can i link him the source code?
---------- Post added at 03:53 PM ---------- Previous post was at 03:44 PM ----------
Just an Observation:
On my i9505 it looks a little weird. I have 2GB of ram. When i see the Bar, i usually see 0.91GB used / 900MB free...
The used part rounds to GB, while the Free remains on MB... this is a little annoying. Would look nicer and be more eye-friendly if it all remained in MB...
GravityBox and XBlast had the same issue. Could that be moded?
It is nothing serious, but i believe it would make the app look nicer.
Thanks for your work!
Can i link him the source code?
Sure.
GravityBox and XBlast had the same issue. Could that be moded?
The problem obviously persisted since I took the code from GravityBox. I'll look into it. It shouldn't be difficult to fix this.
Nice! Thank you. It shure looks much better and user-friendly now!
Take a look at before and after Screenshots.
By the way, on your description you say it is suposed to work on AOSP roms only. You can go ahead and add Samsung TouchWizz Roms too. (touchwizz users will have 2 clear-all buttons. One from Samsung on the bottom, and one from the Mod on the top. No big deal tough)
yurividal said:
By the way, on your description you say it is suposed to work on AOSP roms only. You can go ahead and add Samsung TouchWizz Roms too. (touchwizz users will have 2 clear-all buttons. One from Samsung on the bottom, and one from the Mod on the top. No big deal tough)
Click to expand...
Click to collapse
Thanks for the feedback. I wrote that in the first post.
Position Bug
Here's a bug i found on the Galaxy Nexus(maguro) running Paranoid Android 3.99 RC2.
It would be really nice if you can fix this!
sd3993 said:
Here's a bug i found on the Galaxy Nexus(maguro) running Paranoid Android 3.99 RC2.
It would be really nice if you can fix this!
Click to expand...
Click to collapse
on gravity box this thing has a vertical offset .. have you tried that.. i faced the same on GNex then i put the offset to 10px and it was fixed. Am using stock 4.3 with Xposed framework
ReVo_007 said:
on gravity box this thing has a vertical offset .. have you tried that.. i faced the same on GNex then i put the offset to 10px and it was fixed. Am using stock 4.3 with Xposed framework
Click to expand...
Click to collapse
Yes i used the vertical offset when i used GravityBox or XBlast. But there is no such option here. I hope he adds it soon!
Oh then you should hope he adds it soon
works on Samsung GT S5830 and android 4.3
good job, thanks.
Works on S3 4.1.2 Touchwiz ROM, looks great!
Works on the Sprint Note 3 just fine. Thanks!
!
Sent from my SM-N900P using Tapatalk
Overlapped in Nexus 7 2012 too:
Hi
I got "invalid package" both using your in OP and the one in repo.xposed.info ...
Maybe I'm on Android 4.0.4?
sd3993 said:
Here's a bug i found on the Galaxy Nexus(maguro) running Paranoid Android 3.99 RC2.
It would be really nice if you can fix this!
Click to expand...
Click to collapse
I won't add any user interface. Maybe I'll find a workaround to automatically set the offset when necessary.
Publiuss said:
Hi
I got "invalid package" both using your in OP and the one in repo.xposed.info ...
Maybe I'm on Android 4.0.4?
Click to expand...
Click to collapse
Yep. It's for 4.1+
Though... If I think it through, this should work with Android 4.0 too. I'll try to decrease the minimum SDK level. I can't guarantee anything but I'll try that and hopefully it will work.
EDIT: Here's it is. It should work on Android 4.0+. Please test and tell me if it works.
blchinezu said:
Yep. It's for 4.1+
Though... If I think it through, this should work with Android 4.0 too. I'll try to decrease the minimum SDK level. I can't guarantee anything but I'll try that and hopefully it will work.
EDIT: Here's it is. It should work on Android 4.0+. Please test and tell me if it works.
Click to expand...
Click to collapse
Hi
I can install this, but the module does nothing, nothing is showed in recent tasks screen...
blchinezu said:
I won't add any user interface. Maybe I'll find a workaround to automatically set the offset when necessary.
Click to expand...
Click to collapse
Yes that would be more than enough!
Or if this gets too difficult you can simply make a separate version where the RAM bar is at the bottom instead of at the top! Or maybe even at the left or right. That way nothing gets overlapped
Anyways thanx!
blchinezu said:
I won't add any user interface.
Click to expand...
Click to collapse
I suppose then you won't be adding an option to move the clear all button. Would a separate package with a bottom-left button position be too excessive?
Brilliant work, either way!
This makes Google opinion force close. Disable it and it comes right up again.
Edit: I'm on vzw s3 4.1.2 rooted stock touchwiz
Sent from my SCH-I535 using Tapatalk 2
Disable Samsung MissedEvent Widget
*This module is meant for Samsung TouchWiz ROMs
This module disables the Samsung stock widget for missed calls/sms that shows in lockscreen.
It has been tested on Galaxy S4 with KitKat but it should works with previous versions of Android.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Write here if you have any problem!
invano said:
Disable Samsung MissedEvent Widget
*This module is meant for Samsung TouchWiz ROMs
This module disables the Samsung stock widget for missed calls/sms that shows in lockscreen.
It has been tested on Galaxy S4 with KitKat but it should works with previous versions of Android.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Write here if you have any problem!
Click to expand...
Click to collapse
Thanks bro for making touchwiz modules !
can you make a module that removes the date that appears when viewing the photos in the stock gallery ? That would be really useful.
thanks.
ayoubij said:
Thanks bro for making touchwiz modules !
can you make a module that removes the date that appears when viewing the photos in the stock gallery ? That would be really useful.
thanks.
Click to expand...
Click to collapse
You are welcome but please use the thread for requests
@invano you are my hero.
Ever since I upgraded to KitKat there are 3 modules that I missed.
1. Maximize widgets on lockscreen:- Source
2. Multiple Widgets and Camera on secure lockscreen:- Source
3. Disable Samsung Notifications Widget:- Source
Now I don't have to worry about #3 since you made this awesome module :good::good:
But is there anyway you can make #2 compatible with KK? (After installation I get option to add widgets on secured lockscreen but they wont stick..so it looks there needs to minor code changes to make it compatible with KK)
And also #1 was made compatible with KK a while ago but it would be awesome if you could look at the source and see if you can make any improvements to it
Walter.White said:
But is there anyway you can make #2 compatible with KK? (After installation I get option to add widgets on secured lockscreen but they wont stick..so it looks there needs to minor code changes to make it compatible with KK)
And also #1 was made compatible with KK a while ago but it would be awesome if you could look at the source and see if you can make any improvements to it
Click to expand...
Click to collapse
Don't worry, they will be KK compatible. It's just matter of time I think.
is there any other way to disable this? I remember on JB I did not install such a module
---------- Post added 19th March 2014 at 12:29 AM ---------- Previous post was 18th March 2014 at 11:41 PM ----------
@invano just to check.. I see that you use DashClock as your lockscreen widget.. are you able to swipe left to add more widgets.?
can we remove the add more widgets screen?
wilflare said:
is there any other way to disable this? I remember on JB I did not install such a module
---------- Post added 19th March 2014 at 12:29 AM ---------- Previous post was 18th March 2014 at 11:41 PM ----------
@invano just to check.. I see that you use DashClock as your lockscreen widget.. are you able to swipe left to add more widgets.?
can we remove the add more widgets screen?
Click to expand...
Click to collapse
I made this module because there is no possibility to disable the samsung widget a part from modifying some smali code.
Inviato dal mio iPad utilizzando Tapatalk
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
If your module can allow us to remove the add widget screen... it would be awesome
wilflare said:
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
If your module can allow us to remove the add widget screen... it would be awesome
Click to expand...
Click to collapse
actually its " KeyguardSPlannerWidget"....but thanks for this info....been trying to get rid of that
wilflare said:
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
Click to expand...
Click to collapse
Of course by removing particular apks you obtain the same behavior...but what about stability, splanner o something else?
I made this module because I prefer to hook a particular method rather than disabling applications that could come back useful in a near future.
Everyone is free to choose what he likes best
wilflare said:
thanks! hmm. actually uninstalling the SPlannerKeyguardWidget.apk works too. on KitKat at least.
If your module can allow us to remove the add widget screen... it would be awesome
Click to expand...
Click to collapse
JB 4.2 doesn't have an SPlannerKeyguardWidget.apk only KeyguardWidget.apk which, presumably, is the lockscreen widgets as a whole, so uninstalling is not an option.
Edit: The other one that @louforgiveno mentioned is also not present.
Sent from: SGS2 - JB 4.1.2 GB27 / SGS4 - JB 4.2.2 MF9
invano said:
Disable Samsung MissedEvent Widget
*This module is meant for Samsung TouchWiz ROMs
This module disables the Samsung stock widget for missed calls/sms that shows in lockscreen.
It has been tested on Galaxy S4 with KitKat but it should works with previous versions of Android.
Download
Available on Xposed Repository
Source Code
It is open source. Available on GitHub
Write here if you have any problem!
Click to expand...
Click to collapse
GRAZIE!!!! :victory:
xdapao3 said:
GRAZIE!!!! :victory:
Click to expand...
Click to collapse
I'm a bit late (I didn't see the notifications... ) ..anyway you're welcome!
not working for me on note 2 4.4.2 Ditto ROM
poison_snake said:
not working for me on note 2 4.4.2 Ditto ROM
Click to expand...
Click to collapse
Its working for me..
Sent from a DN3 V4 powered Note2. Peace✌
Can you please make this compatible with the Galaxy S5?! @invano
Joe0113 said:
Can you please make this compatible with the Galaxy S5?! @invano
Click to expand...
Click to collapse
This
GS5 Towel Rooted
I installed this on my SGSV and i thought it had worked.
But im now getting missed notifcations on my lock screen again.
Was i imagining things?
I desperatly need this ! Though it didnt work on my rooted s5 stock rom .. Strange all mods from xposed work without any problem ..
Any solution ?
OP hasn't posted in here for over a month.
Here's hoping its because he's busy working on a fix for the S5.
Sent from my SM-G900I using XDA Premium 4 mobile app
@Cpasjuste,
Sorry if this thread is in the wrong place. I am not able to post in the development section which is where I think this should be.
I have modified the thor-gapps ROM v2 to work on my Kindle HDX 8.9 (which is running great by the way)..
The remaining item i have to do is recompile or modify the android keyboard to be the correct width in Landscape Mode.
Do I have to recompile the whole 4.2.2 branch to modify the keyboard app or can I just recompile the keyboard app on it own?
Also when I have finished, is it ok to release the modified ROM (on XDA) to support the HDX 8.9 community?
Hi !
You can just compile the keyboard from aosp with a special command to the android build script (don't remember which one), well it will still compile all dependencies but still much faster.
I will try to take the time to take a look at it this week end if you didn't succeed.
Finally, of course you can share your ROM !
Envoyé de mon KFTHWI en utilisant Tapatalk
Thank you
I figured out how to build the keyboard. The command is 'make LatinIME' issued from the root of the source tree. Just need to work out the changes required now.
Thank you for all the support and information you provide here.
Sent from my KFAPWI using Tapatalk
I have now managed to rebuild the AOSP JDQ39 Android keyboard.
As a test I replaced the newly built LatinIME.apk with no changes in /system/app and rebooted. The keyboard fails to work.
I then replaced it with the original one and rebooted and now this doesn't work.
Does anyone know what the issue might be?
ggow said:
I have now managed to rebuild the AOSP JDQ39 Android keyboard.
As a test I replaced the newly built LatinIME.apk with no changes in /system/app and rebooted. The keyboard fails to work.
I then replaced it with the original one and rebooted and now this doesn't work.
Does anyone know what the issue might be?
Click to expand...
Click to collapse
I think you may have to also update/replace the libraries which must be built with the keyboard ( liblatin*.so etc..). This may be the problem.
Envoyé de mon KFTHWI en utilisant Tapatalk
Cpasjuste said:
I think you may have to also update/replace the libraries which must be built with the keyboard ( liblatin*.so etc..). This may be the problem.
Envoyé de mon KFTHWI en utilisant Tapatalk
Click to expand...
Click to collapse
Thanks Cpasjuste, That did it I have now got the newly built keyboard working, just need to now reduce the width so it isn't obscured by the navbar.
ggow said:
Thanks Cpasjuste, That did it I have now got the newly built keyboard working, just need to now reduce the width so it isn't obscured by the navbar.
Click to expand...
Click to collapse
That's the keyboard done. Just doing a bit of testing and have just noticed the camera is not working.
Cpasjuste, on the HDX 7" does the camera work on the thor-gapps-rom v2?
ggow said:
That's the keyboard done. Just doing a bit of testing and have just noticed the camera is not working.
Cpasjuste, on the HDX 7" does the camera work on the thor-gapps-rom v2?
Click to expand...
Click to collapse
Hi @jeryll, thanks for your PM.
I have tried a few camera apps from the market and none that I have tried have worked. So I'll finalise the first build, test it and then go for a release this weekend.
I'll take a look at the camera issue after the first release is done.
ggow said:
That's the keyboard done. Just doing a bit of testing and have just noticed the camera is not working.
Cpasjuste, on the HDX 7" does the camera work on the thor-gapps-rom v2?
Click to expand...
Click to collapse
@jeryll,
Thanks for the PM. I tried various camera apps from the market of which none worked. I'll finalise the first build and aim to release the ROM this weekend.
I'll take a look at the camera issue after that.
Apollo Gapps ROM v1.1 Released...
I have released the Apollo Gapps ROM v1.1 for the Kindle Fire HDX 8.9" here:
http://forum.xda-developers.com/showthread.php?p=52863905
Thank you
ggow said:
I have released the Apollo Gapps ROM v1.1 for the Kindle Fire HDX 8.9" here:
http://forum.xda-developers.com/showthread.php?p=52863905
Click to expand...
Click to collapse
Thank you very much for your effort, I am downloading rom righ now, upgrading safestrap, backuping etc., after little bit testing will report here how things go (until i have enough posts to report directly in development section).
Jeryll
Perfect!
ggow said:
I have released the Apollo Gapps ROM v1.1 for the Kindle Fire HDX 8.9" here:
http://forum.xda-developers.com/showthread.php?p=52863905
Click to expand...
Click to collapse
OK, installed latest safestrap 3.72 for apollo, have a little fight with data restoration, but win, installed Apollo Gapps ROM v1.1. So far so good. Playstore working, so im go for little bit customizing to my liking.
Hi Jeryll, glad you got working . Time permitting I'll take a look at the camera issue next.
Sent from my KFAPWI using Tapatalk
my findings
Well, so far I am impressed, I like this ROM very much
If you have time in the future, here are some things to improve:
- system widget picker - text can't be read, because its white on white background
- settings -> security -> device administrators - you see registered apps, but you can't choose any
Nothing critical, and I don't use camera, so that is not big deal for me.
Again thanks, will patiently wait for bugfixes...
It works!
I have been waiting for months for this. Everything works swimmingly, except for the camera. The search button on the right even uses google search instead of amazon's ****ty version. The settings are all de-amazonified, and I feel like I have a real android tablet now!
thouliha said:
I have been waiting for months for this. Everything works swimmingly, except for the camera. The search button on the right even uses google search instead of amazon's ****ty version. The settings are all de-amazonified, and I feel like I have a real android tablet now!
Click to expand...
Click to collapse
Glad you like it, I'm looking at the Camera side of things at the moment - gonna be a bit learning curve.
ggow said:
Thanks Cpasjuste, That did it I have now got the newly built keyboard working, just need to now reduce the width so it isn't obscured by the navbar.
Click to expand...
Click to collapse
So did you correctly fix the KB width ? My own implementation is very buggy. I do not have a build system anymore for now so it could be cool for us (Thor 7")
Cpasjuste said:
So did you correctly fix the KB width ? My own implementation is very buggy. I do not have a build system anymore for now so it could be cool for us (Thor 7")
Click to expand...
Click to collapse
Yes I did.
Attached is the LatinIME.apk that I built from the JDQ39 source. If the Thor's navbar is the same width as the Apollo's then this should work on the Thor 7" device.
If not then I can build a version of it for you.
jeryll said:
Well, so far I am impressed, I like this ROM very much
If you have time in the future, here are some things to improve:
- system widget picker - text can't be read, because its white on white background
- settings -> security -> device administrators - you see registered apps, but you can't choose any
Nothing critical, and I don't use camera, so that is not big deal for me.
Again thanks, will patiently wait for bugfixes...
Click to expand...
Click to collapse
I wasn't able to reproduce the problem with the system widget picker, I am using Apex Launcher which seems to work fine. Which launcher are you using?
ggow said:
I wasn't able to reproduce the problem with the system widget picker, I am using Apex Launcher which seems to work fine. Which launcher are you using?
Click to expand...
Click to collapse
Lightning launcher
https://play.google.com/store/apps/details?id=net.pierrox.lightning_launcher_extreme&hl=enhttps://play.google.com/store/apps/details?id=net.pierrox.lightning_launcher_extreme&hl=en
Apex launcher use its own widget picker (non system), I used it before this awesome ROM come - on rooted FireOS with gapps installed (Lightning launcher crashed when I try it, because in FireOS, there is no system widget picker) ... so imagine my surprise, when I try Lightning launcher on this Apollo Gapps ROM v1.1, and it was working with widgets without crash ...
Hey guys!
Want to give your phone an Android L look? If yes, you are in the right place (If not, still try it out )!!
I made a Theme package of Android L for all devices with Xposed Framework Support.. It is a Theme and nothing more! It doesn't have any features ported from Android L as such, except for the UI
Click to expand...
Click to collapse
What does it have?
Themed Statusbar Icons
Themed Settings
Themed Calculator
Themed Framework
Android L Wallpaper
Boot Animation
Fonts
Ringtones
Much, much, more..
Click to expand...
Click to collapse
Downloads:
Version 1.0
Version 1.1 - No font version
Click to expand...
Click to collapse
Changelog:
Version1.1:
-Fixed Boot Animations and Fonts problem(The Boot Animations were copied even if it wasn't checked)
-Continue Applying theme even if resource not found
Version 1:
Initial Release
NOTE:
-All 1.x versions will be shown as Version 1.0 in Settings
-Use No Font version on Motorola Stock ROMs. Fonts option will be shown, but won't work!
Click to expand...
Click to collapse
If you have any problems on this Module, feel free to post it in the thread or PM me. Further updates will be based on the response received by Version 1.0. Nobody wants to end up working for nothing :laugh:
Reserved
I'll have this one.. In case I backport a feature, I'll drop it here!
I will give it a try.
What about the notifications? Did you theme it?
Oh and for the switch in the settings, I think it is a kind of yellow buttons or something like that on Android L. Otherwise, good job.
Just tested on my Moto X. What's not working:
- Settings Panel partially themed (background is still black, not gray like the image)
- Navigation Bar wasn't themed with the new L buttons.
- Status bar icons weren't themed either.
- Calculator wasn't themed as well.
- Whatsapp isn't themed.
- Everything else seems to have worked just fine, I'll update this post as I find more.
The only difference I'm seeing on my Nexus 5 (Stock 4.4.4) is the blue action bar in Settings and the wallpaper/boot animation.
it seems the app is applying the boot animation without even ticking the checkbox for it from within the app , and even after disabling it / uninstalling the app , i still have the Android L boot animation. this makes me wonder if other system files have been also changed which is quite troublesome since it means it's gonna break any future ota updates and will force me to sideload such updates.
can you add a revert/restore feature , or at least give us some info on what exactly is being changed/overwritten with this app.
thanks
MaKTaiL said:
Just tested on my Moto X. What's not working:
- Settings Panel partially themed (background is still black, not gray like the image)
- Navigation Bar wasn't themed with the new L buttons.
- Status bar icons weren't themed either.
- Calculator wasn't themed as well.
- Whatsapp isn't themed.
- Everything else seems to have worked just fine, I'll update this post as I find more.
Click to expand...
Click to collapse
harland3 said:
The only difference I'm seeing on my Nexus 5 (Stock 4.4.4) is the blue action bar in Settings and the wallpaper/boot animation.
Click to expand...
Click to collapse
I understand your problems.. I use CyanogenMod, I have themed everything based on the files present in it. I haven't made changes in my code for the Module to continue theming if it doesn't find what it has to on your phone.. I cannot make out which file is causing it! If you can attach your Xposed Logs(Xposed Installer -> Logs -> Menu Button-> Save to SD), it would be great [emoji4]
Tapsibaba said:
I will give it a try.
What about the notifications? Did you theme it?
Oh and for the switch in the settings, I think it is a kind of yellow buttons or something like that on Android L. Otherwise, good job.
Click to expand...
Click to collapse
I haven't themed the notifications.. I will look into it.. Thanks for your suggestions!
ningen90 said:
it seems the app is applying the boot animation without even ticking the checkbox for it from within the app , and even after disabling it / uninstalling the app , i still have the Android L boot animation. this makes me wonder if other system files have been also changed which is quite troublesome since it means it's gonna break any future ota updates and will force me to sideload such updates.
can you add a revert/restore feature , or at least give us some info on what exactly is being changed/overwritten with this app.
thanks
Click to expand...
Click to collapse
Maybe problem with my code [emoji20].. You can find whatever is modded backed up in your /sdcard/AndroidLTheme/backup folder..
Can you post the source, please?
Great to have this onboard
Everything works except the settings panel is still black
Sent from me
TsunaH said:
Everything works except the settings panel is still black
Sent from me
Click to expand...
Click to collapse
Doesn't work for me properly. Only boot animation, wallpaper and navigation bar worked. The settings didn't though. Possible some issue with CM11 theme override? Anyone also experiencing it? Or is it the custom ROM I use that gives problems?
not working for me :/ only the setting & xposed display changed. i'm on n5 4.4.4 stock rom + GB. tried to disable the gb and it's not working too
harland3 said:
The only difference I'm seeing on my Nexus 5 (Stock 4.4.4) is the blue action bar in Settings and the wallpaper/boot animation.
Click to expand...
Click to collapse
The same is for me. LG Optimus G, Omni ROM, 4.4.2.
gravityy said:
not working for me :/ only the setting & xposed display changed. i'm on n5 4.4.4 stock rom + GB. tried to disable the gb and it's not working too
Click to expand...
Click to collapse
only xposed display here. im on galaxy note 3 4.4.2
rhar**** said:
Can you post the source, please?
Click to expand...
Click to collapse
Yes, sure! I'm waiting for confirmation from other AOSP ROM users..
ATMOSF3AR said:
Great to have this onboard
Click to expand...
Click to collapse
Thank you
TsunaH said:
Everything works except the settings panel is still black
Sent from me
Click to expand...
Click to collapse
Dima_2005 said:
Doesn't work for me properly. Only boot animation, wallpaper and navigation bar worked. The settings didn't though. Possible some issue with CM11 theme override? Anyone also experiencing it? Or is it the custom ROM I use that gives problems?
Click to expand...
Click to collapse
gravityy said:
not working for me :/ only the setting & xposed display changed. i'm on n5 4.4.4 stock rom + GB. tried to disable the gb and it's not working too
Click to expand...
Click to collapse
-=LT-United=- said:
The same is for me. LG Optimus G, Omni ROM, 4.4.2.
Click to expand...
Click to collapse
Check Version 1.1! It should fix it If not please post the Log :cyclops:
Confirmed working on HTC M8 GPE skydragon. Also seems to play nice with Tinted Status Bar module(amongst others). Thanks, now titanium backup and root explorer look colorful!
View attachment 2830852
will this work on stock xperia or its just for AOSP/CM ?
No text characters.
Seems I have lost all text characters when I used the font. Not sure how to troubleshoot considering I can't see anything.
Moto X 4.4.2 Krypton
Adhi1419 said:
Yes, sure! I'm waiting for confirmation from other AOSP ROM users..
Thank you
Check Version 1.1! It should fix it If not please post the Log :cyclops:
Click to expand...
Click to collapse
thanks it's work like a charm! btw there is no noticeable change in the launcher right? just in the calc/setting/xposed/etc display? *i'm not trying the L yet
Adhi1419 said:
Yes, sure! I'm waiting for confirmation from other AOSP ROM users..
Thank you
Check Version 1.1! It should fix it If not please post the Log :cyclops:
Click to expand...
Click to collapse
Now it works well! Except that calculator now looks a bit weird (not like before installing this theme, but not like in Android L ), but I don't really mind that. Of course, fix would be welcome .
Download link is in the thread, do not use the "Download" section in XDA DEVDB, my network has some problems with it for now.
After nearly one year's silence, SwipeBack is now back alive, known as SwipeBack2.
SwipeBack2 is the continue of SwipeBack. It has still the basic feature, swipe-to-return gesture, inspired by the library SwipeBackLayout written by @ikew0ng(a.k.a. IssacWong, 碎星iKe, 碎iKe). It provides a smooth, nature-like and highly customizable swipe-to-return gesture. This module is initially a wrapper of SwipeBackLayout in Xposed, and was welcomed widely by Xposed users. Gradually it has gained much new features that is more than SwipeBackLayout.
If you have installed the old SwipeBack, please uninstall it first, and then you can install SwipeBack2
Features:
* Swipe-to-return gesture
* Per-activity settings which means you are able to customize settings on <strong>each page of each app</strong>
* Experimental hacks for Lollipop (may not work, use with caution, do not turn it on globally)
* More experimental features are coming in future releases.
Note that SwipeBack2 is now only a rewrite and a port to Lollipop (but it still works on ICS/JB/KK). It has many work to-do, as:
* Pure-gesture mode (disable scrolling effects, enables compatibility with apps that consist of Fragments but not Activities, and can work with Browsers)
* Fully-costomizable trigger area (at <strong>any</strong> position on the edge, to fix compatibility with apps that has a gesture like drawers already)
* Automatic bug report and crash log submitter
* More (<strong>advices are always welcome)
SwipeBack2 is free software released under the terms of GNU GPLv3. Source code available at https://github.com/PaperAirplane-Dev-Team/SwipeBack
Changelog
1.0.2:
- Fix icons
- Add ability to show a settings shortcut to the current app activity in notif bar
This is a minor release. We will go to fix several bugs in the next few weeks
1.0.1:
- Fix crashes in main app UI
- Fixes for apps with wallpaper
Downloads
From Xposed Store: http://repo.xposed.info/module/info.papdt.swipeback
From Google Play Store: https://play.google.com/store/apps/details?id=info.papdt.swipeback
FAQs:
Q: Why renamed to SwipeBack2?
A: Because SwipeBack2 is completely rewritten, and is refactored to have a better stability and flexibility. And another reason is, that SwipeBack (us.shandian.swipeback) is blacklisted by Alipay because of the unsecure SwipeBack, so I just renamed it to SwipeBack2 (info.papdt.swipeback), hoping that it will not be blacklisted any more.
Q: Would you add feature X / fix bug X?
A: Feel free to send emails or open issues on GitHub page. I may not have time to reply to you all, but I will take a look at bug reports and feature requests and have the resonable ones implemented in new releases.
Q: SwipeBack is great! Do you accept donations?
A: Well, not now.
XDA:DevDB Information
SwipeBack2, Xposed for all devices (see above for details)
Contributors
PeterCxy
Source Code: https://github.com/PaperAirplane-Dev-Team/SwipeBack
Xposed Package Name: info.papdt.swipeback
Version Information
Status: Beta
Created 2015-03-31
Last Updated 2015-03-31
Crashes when loading the app, gets to about 80% then fc
Edit: logcat https://www.dropbox.com/s/jikihl6rkfijgiu/logcat_and_device_info.zip?dl=0
Not for me, works as it should. Everything fine. Just have to experiment a bit with the Lollipop Feature, few Apps don't like it as stated in the App.
Ty!
apps loaded well but cannot change settings any of the app "unfortunaly swipeback 2 has stopped" please fix it
using in note 2 phantom 13 ROM
Cannot get it working on a Nexus 5 with CM12, I don't know if I'm doing anything wrong but I don't think so. Just installed, enabled it on Xposed and restarted. It's not CAF, so it may be fault of the rom. What android and rom are you using?
EDIT:
Just disabled every other module and it's working now. I will try to find which one is causing the problem and report it because it may be useful to someone.
Works fine expect one bug - on Lollipop when I go to the task manager after swipe back an app it shows the launcher screen as the thumbnails for the swiped back app.
Works great on LG G2 XenonHD 5.0.2:good:
Fantastic Modul, easy to use. Just awesome. Thank you.
https://dl.dropboxusercontent.com/u/73964661/SCR_20150331_190900.mp4
https://dl.dropboxusercontent.com/u/73964661/SCR_20150331_184109.mp4
Galaxy S5 G900F CM12 Fusion ROM
good to see new version thanks for continuing this module
Sent from LG Optimus G
Im glad someone revived this amazing module ... please keep it updated ... i will keep giving feedback and any bugs if i find on this thread
Edit 1 Bugs-
1. While swiping back on Whatsapp it goes back perfectly from the Chat screen to the Chat list. But while Swiping back on other apps like Gallery or Instagram. It doesnt swipe back. It goes to Home Screen.
2.After Swiping back the Recent app page shows wrong thumbnails .. it shows the Home screen as thumbs instead of App last state. (Screenshot Attached)
3.Also after restart i got a com.location.google has stopped ... i may have said the term wrong .. but it was something regarding Location.
4. SB2 force closes if Global settings option is pressed.
Notes:
I have unistalled old Swipeback and Freshly Installed this.
I love this app and will continue to send feedback to make it best.
--
Kitkat - LG G2 D802 International Model - Stock Firmware.
Been waiting for this module to work, thx for it. Unfortunately there are some bugs, the Gmail animation is fine but the rest are broken with in the status bar, like in the video https://vimeo.com/123755651 (nexus 4 stock 5.0.1 and Franco kernel) . Keep up the good work
nicholes said:
apps loaded well but cannot change settings any of the app "unfortunaly swipeback 2 has stopped" please fix it
using in note 2 phantom 13 ROM
Click to expand...
Click to collapse
Same here...;/ (and I know logcat or gtfo
can anyone confirm if it is working on kitkat or not(mine dont work)
Expect the called bugs, great app!
crash at loading apps and breaks recent app menu
nicholes said:
can anyone confirm if it is working on kitkat or not(mine dont work)
Click to expand...
Click to collapse
it runs fine on my Nexus 5 running the latest SlimKat
For us new to this... What does it do?
Simply swipe to go back to the screen you were at previously?
HorstiG said:
Fantastic Modul, easy to use. Just awesome. Thank you.
https://dl.dropboxusercontent.com/u/73964661/SCR_20150331_190900.mp4
https://dl.dropboxusercontent.com/u/73964661/SCR_20150331_184109.mp4
Galaxy S5 G900F CM12 Fusion ROM
Click to expand...
Click to collapse
What is that widget you use? I attached a snip of it.
DeisNet said:
Been waiting for this module to work, thx for it. Unfortunately there are some bugs, the Gmail animation is fine but the rest are broken with in the status bar, like in the video https://vimeo.com/123755651 (nexus 4 stock 5.0.1 and Franco kernel) . Keep up the good work
Click to expand...
Click to collapse
Same here :/
Moto G 5.0.2
mcdavid said:
What is that widget you use? I attached a snip of it.
Click to expand...
Click to collapse
Hi, thats Zooper Widget Pro, Handmade