Does anyone have a Samsung Galaxy S II Virgin Mobile SPH-D710 G28 stock or custom ROM? I bricked my SGS2 and need a ROM. I can't find one that I need anywhere online.
joshj1075pil said:
Does anyone have a Samsung Galaxy S II Virgin Mobile SPH-D710 G28 stock or custom ROM? I bricked my SGS2 and need a ROM. I can't find one that I need anywhere online.
Click to expand...
Click to collapse
Go to sammobile,com you will find all the stock rom according to your country,
Sprint Problems
Yes, I found the ROM I need, but it's for a sprint carrier. I understand that if I successful flash to sprint, then it will not allow me to use data which is a huge thing.
Sprint rom on VM d710
joshj1075pil said:
Yes, I found the ROM I need, but it's for a sprint carrier. I understand that if I successful flash to sprint, then it will not allow me to use data which is a huge thing.
Click to expand...
Click to collapse
I'm using a sprint Rom on VMD710 Phone and I get my Data just fine.
Related
It would be greatly appreciated if anybody here has the stock Rogers rom. I deleted a bunch of bloatware and have root but i think im going to keep my phone stock. Tried looking but cant seem to find a stock Rom. Would be helpful if there was a thread that had all the stock carriers roms. Thanks
I would also GREATLY appreciate this!
If you just want some of the bloat back for Rogers, DAGr8 has them here:
http://forum.xda-developers.com/showpost.php?p=23092508&postcount=3
I want the stock rom because I flashed an ATT one which sucks.
I agree that would be amazing. I got screwed by a guy that sold me the phone and need rogers Rom to do a fully flash. I can't even access internal storage.
Can i flash Rogers ROM onto to Bell i717
Hey guys.
I just bought unlocked Galaxy Note from Bell and its full of Bell crap.
Can i flush Samsung Galaxy Note i717M with i717R (Rogers)
And, by the way does any one have stock Rogers ROM for i717R ?
greatly appreciative Answer and guidance in advance
Same here would really like a full set of stock ROM files for the I717R (Rogers) and get rid of the AT&T crap one.
BTW you can put Da_G's rooted kernel on the AT&T ROM and it is usable, but like you guys I want my Rogers image back.
Guys,
I just bought Rogers Galaxy Note , yesterday,
Everything is stock,
I don't how to get stock files, if somebody can direct me how too. I can help.
Sent from my SGH-I717R using XDA
gotshoaib said:
Guys,
I just bought Rogers Galaxy Note , yesterday,
Everything is stock,
I don't how to get stock files, if somebody can direct me how too. I can help.
Before I start rooting and custom roms.
Sent from my SGH-I717R using XDA
Click to expand...
Click to collapse
Sent from my SGH-I717R using XDA
Check back later on my AWS topic, i'll put the link there once the upload is complete
i did a full dump before flashing stuff to it
upload complete http://forum.xda-developers.com/showthread.php?t=1547114
How to take your 7zip file and make it an installable ROM (.zip file)??
AllGamer said:
upload complete http://forum.xda-developers.com/showthread.php?t=1547114
Click to expand...
Click to collapse
Okay, so I'm bit of a novice to these ROMs. But your upload is a 7zip file. If I was going to use it to flash a Rogers i717r would I just rename it to .zip and the use recovery mode?
Currently using Noteworthy 4.0.3 Beta 2 and would like to put the Note back to the Rogers stock rom.
AllGamer, I know this may be asking for too much, but would you be able to get me a stock image of a Telus Note?
adv1sory said:
AllGamer, I know this may be asking for too much, but would you be able to get me a stock image of a Telus Note?
Click to expand...
Click to collapse
Y'know you could just extract it from the .tar I made at your request a few days ago.
I already root and load superuser on my AT&T galaxy note i717, before root i can get 4g signal but only Edge after the root, how can i fix this ?
hmm. that shouldn't have happened. what method did you use??
toucan203 said:
hmm. that shouldn't have happened. what method did you use??
Click to expand...
Click to collapse
Exactly this steps only for root with the stock rom :
http://forum.xda-developers.com/showthread.php?t=1586223
and then install superuser app
Did you check the apn settings
Sent from my SAMSUNG-SGH-I717 using xda premium
lbroller said:
Did you check the apn settings
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
It is exactly the same as AT&T use, do you recommend that i make a recovery from my original stock room and start again ?, if i make a recovery to my stock rom it remains rooted or i need to root again ?
Hi it seems you have the T-Mobile radio antenna installed. I'm still a noob at this but look at my post called "flash Samsung galaxy note i7i7 back to at&t" towards the end of the comments they'll be talking about a att-stock-odin-antenna or something around those lines just download it and no need to unzip/extract it and you should have 4g GPA/lye back on your note also you need Odin which I assume you have.
2nd edit: also this doesn't clear your root/flash only the antenna is updated
Sent from my SAMSUNG-SGH-I717 using XDA
zacharyXD said:
Hi it seems you have the T-Mobile radio antenna installed. I'm still a noob at this but look at my post called "flash Samsung galaxy note i7i7 back to at&t" towards the end of the comments they'll be talking about a att-stock-odin-antenna or something around those lines just download it and no need to unzip/extract it and you should have 4g GPA/lye back on your note also you need Odin which I assume you have.
2nd edit: also this doesn't clear your root/flash only the antenna is updated
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Just for the records, i´ll be able to fix the problem flashing again the original AT&T stock radio at :
http://m-s-j.net/dagnarf/phone-odin-att-stock-radio.tar
I´m using this i717 with the original AT&T stock rom rooted with original stock radio from AT&T in Telcel mexico with no problems at all, for some reason the original radio can´t recognize the Telcel signal as 3g/4g, just reload the radio again from the link above and everything works fine now !, Thank you every one, specially zacharyXD !
Here is the Official Original Stock i717M Bell Canada Firmware. For People who want to revert back to stock.
1 RWC_signed_Q1_USA_1221.pit PIT FILE
http://www.2shared.com/file/rs2Oq58t/RWC_signed_Q1_USA_1221.html
2. ABOOT_SGH-I717M_I717MUGLA2_user_CL875155_REV00.tar.md5 BOOTLOADER FILE
http://www.2shared.com/file/7PUjxhL1/ABOOT_SGH-I717M_I717MUGLA2_use.html
3 PLATFORM_KERNEL_AMSS_SGH-I717M_I717MUGLA2_user_CL875155_REV00.tar.zip (533.11 MB) PDA – UNZIP it first.
http://www.multiupload.nl/TA1FPCNZXI
4. I717MUGLA2_phone_secure_Q1_BMC_REV_00_CL870799.tar.md5 PHONE File
http://www.2shared.com/file/HDuEZqQm/I717MUGLA2_phone_secure_Q1_BMC.html
5. SGH-I717M-CSC-BMCLA2.tar.md5 CSC FILE
http://www.2shared.com/file/9pdPE8Ch/SGH-I717M-CSC-BMCLA2tar.html
All the above files are in order. Just plug them in ODIN and put your phone in download mode by holding Volume down and power button. Get the Green Guy and your are set. press start.
Enjoy.
Say Thanks if you like it. and If anyone need Samsung firmware i can help. PM me.
Hmmmm every time I add the bootloader in Odin it crashes on me.
Any specific version of Odin we should be using?
I have the i717R
After flash this, will my phone be i717M?
and if I wanna flash counter reset package, should I use i717M or i717R?
ytwytw said:
I have the i717R
After flash this, will my phone be i717M?
and if I wanna flash counter reset package, should I use i717M or i717R?
Click to expand...
Click to collapse
Stock Rogers files also available,
http://forum.xda-developers.com/showthread.php?t=1630843
Sent from my SAMSUNG-SGH-I717 using XDA
gotshoaib said:
Stock Rogers files also available,
http://forum.xda-developers.com/showthread.php?t=1630843
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Yes I do know that but since I am using Bell, so i wonder would it work better with Bell Firmware?! (as Bell LTE is different from Rogers one)
and I heard Bell i717 ICS is coming soon... so... yeah
ytwytw said:
I have the i717R
After flash this, will my phone be i717M?
and if I wanna flash counter reset package, should I use i717M or i717R?
Click to expand...
Click to collapse
I've made the stock firmware for Bell that was originally on here (search). From my experience making that and the subsequently making Telus and Rogers stock firmware with files from other people, I know that if you flash one of the big three's firmware on a Bell Note, the model reported by the software is that of the owners firmware. Can confirm it as when I flashed the Telus firmware on my Bell Note, it reported it as an i717D (Telus' variant). I assume it will be the same in your case.
MrJoran said:
I've made the stock firmware for Bell that was originally on here (search). From my experience making that and the subsequently making Telus and Rogers stock firmware with files from other people, I know that if you flash one of the big three's firmware on a Bell Note, the model reported by the software is that of the owners firmware. Can confirm it as when I flashed the Telus firmware on my Bell Note, it reported it as an i717D (Telus' variant). I assume it will be the same in your case.
Click to expand...
Click to collapse
I too own a Rogers i717R and after flashing the bell kernel found in the development forum, My boot up screen flashes i717m now. and under my about screen it shows under moderl number, "SGH_I717M". therefore being bell branded now. I would believe anyhow?!? Any seconds on that?!?
Flashed this am in about 10mins before heading off to work! everything works perfectly! thanks again for this. Now to continue to patiently wait for Bell's ICS to drop in May...(oh wait, it's now june) Way to go Bell
johnnywhojr said:
Flashed this am in about 10mins before heading off to work! everything works perfectly! thanks again for this. Now to continue to patiently wait for Bell's ICS to drop in May...(oh wait, it's now june) Way to go Bell
Click to expand...
Click to collapse
https://twitter.com/bell_support/statuses/209644296146649088
Official Answer from Bell Canada
ytwytw said:
https://twitter.com/bell_support/statuses/209644296146649088
Official Answer from Bell Canada
Click to expand...
Click to collapse
HaHa. Read the twitter comment. "we will keep you posted with details very soon "
Like c'mon Bell, get off your asses and give us what we want!
I choose(refuse) to run a custom rom on my Note. just my preference.
johnnywhojr said:
HaHa. Read the twitter comment. "we will keep you posted with details very soon "
Like c'mon Bell, get off your asses and give us what we want!
I choose(refuse) to run a custom rom on my Note. just my preference.
Click to expand...
Click to collapse
LOL
We definitely need the bell official rom so we can have a better custom firmware
And hopefully the kernel source of i717 will out soon so we can do OC or fast charge
Qualcomm S3 always make me mad but hopefully Samsung can change my mind
This firmware cannot be flashed on an AT&T I717, right?
shaodx said:
This firmware cannot be flashed on an AT&T I717, right?
Click to expand...
Click to collapse
Sure it can. As long as its a i717 note and not the international version
Sent from my galaxy beastly note using team perfection obejection ics
Hi Guys, I'm trying help my friend fix his Galaxy Note. I'm not too sure if what to do here. There are five files posted.
Do I need to flash them all?
In what order should they be flashed?
If you can do a screenshot that would be perfect. Thank you very much XDA folks.
There is no CWM at this point after flashing this http://forum.xda-developers.com/showthread.php?t=1599127.
andruyd said:
Hi Guys, I'm trying help my friend fix his Galaxy Note. I'm not too sure if what to do here. There are five files posted.
Do I need to flash them all?
In what order should they be flashed?
If you can do a screenshot that would be perfect. Thank you very much XDA folks.
There is no CWM at this point after flashing this http://forum.xda-developers.com/showthread.php?t=1599127.
Click to expand...
Click to collapse
You flash them with Odin3 v1.85. And you input them all at once using Odin.
The problem is that when flashing this from, I got an error related pit on my i717.
Sent from my SAMSUNG-SGH-I717 using XDA
is it a bell phone you are trying to flash
No, I have a AT&T one but use it with Bell network. That's why I want to flash Bell stock ROM.
Use this .pit file - works fine for me: https://www.dropbox.com/s/7nd76fghy0uwvyi/RWC_signed_Q1_USA_1221.pit
As for the other files, yeah flash them all.
They should be entered as shown in the attachment.
Just got my Bell Note a couple of days ago and am loving it so far...Of course the tinkerer in me has been itching to void my warranty since hour 1 by trying out an ICS ROM..
I had resolved to wait until I see Bell's official update bloat and all..but the availability of the files in the OP has got me waivering.....
Must....resist...aaggghhh!!!! damn you OP....
Thanks for these...sigh
So I'm pretty new to the S3 and have it rooted but all the different model numbers has me confused. I have the Sprint SPH-L710 so what ROMs am I able to flash exactly? My phone is the version with 2gb of RAM so am I able to use roms for the i9305 or can I only use the ROMs specifically for the Sprint model.
crusnik23 said:
So I'm pretty new to the S3 and have it rooted but all the different model numbers has me confused. I have the Sprint SPH-L710 so what ROMs am I able to flash exactly? My phone is the version with 2gb of RAM so am I able to use roms for the i9305 or can I only use the ROMs specifically for the Sprint model.
Click to expand...
Click to collapse
ur phone is cdma. ur ans is here.brother find link download and flash it
http://www.sammobile.com/firmware/?page=3&model=SPH-L710&pcode=SPR&os=1&type=1#firmware
Only for the sprint model.
crusnik23 said:
So I'm pretty new to the S3 and have it rooted but all the different model numbers has me confused. I have the Sprint SPH-L710 so what ROMs am I able to flash exactly? My phone is the version with 2gb of RAM so am I able to use roms for the i9305 or can I only use the ROMs specifically for the Sprint model.
Click to expand...
Click to collapse
#
You are in the wrong forum to make it clear flash nothing from this forum.
jje
I just picked up a used VM SGS2 and curious to see what I can do to it.
but there are so many different carriers/variants, that I don't know what files I can safely flash to it.
On my HTC One V, its pretty much a VM phone, and you just have to know if you're GSM and CDMA...
Any help/tips/pointers/etc would be appreciated.
Thanks in advance
Matt_the_Geek said:
I just picked up a used VM SGS2 and curious to see what I can do to it.
but there are so many different carriers/variants, that I don't know what files I can safely flash to it.
On my HTC One V, its pretty much a VM phone, and you just have to know if you're GSM and CDMA...
Any help/tips/pointers/etc would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
In settings>about phone. Is your model a i9100? And what android version? If 4.0.4 do not wipe anything with the stock recovery.
edit- just seen the post below. Ignore this i didnt know virgin had a i9100m
Sent from my GT-I9100 using Tapatalk 2
Matt_the_Geek said:
I just picked up a used VM SGS2 and curious to see what I can do to it.
but there are so many different carriers/variants, that I don't know what files I can safely flash to it.
On my HTC One V, its pretty much a VM phone, and you just have to know if you're GSM and CDMA...
Any help/tips/pointers/etc would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
You can pretty much flash any Roms/mods that's in the i9100 thread. The virgin mobile version is pretty much the same as the international i9100. Only difference is virgin mobile and bell puts a "M" at the end of their model i9100m.
I my self got the virgin mobile S2 and I have flashed every possible Roms or Mods around both in the original development and regular development section. Now with the mods, just make sure you read what the mod is meant for because some is intended for Samsung based ROM and some are for AOSP based ROM.
If you need help in flashing anything, let me know. Your gonna need Odin downloaded on your computer so you can flash a kernel with clockworkmod recovery then you might need triangle away to remove yellow triangle in the first boot screen you see with the i9100 logo but that depends on what kernel you flash. If the kernel is Samsung official un-modded then it won't give you a yellow triangle but if you flash a custom one it will, it will also make you flash counter go up but triangle away will get rid of both the counter and yellow triangle.
Btw - are you in the US or Canada? It shouldn't make a difference anyway, I had both models and its the same phone. And hey the phones are CDMA phones but should also work on GSM but only problem I heard was their Data plan wasn't working correctly just for the fact that the Virgin phones are CDMA.
JUST MAKE SURE YOUR MODEL STARTS WITH i9100!!
All the i9100 models are pretty much the same
Virgin US does got a SPH - D710 model called Galaxy S2 4G
http://en.m.wikipedia.org/wiki/Samsung_Galaxy_S_II
My phone model is SPH-D710VMUB
By now you should be aware that you're in the wrong forum.
Sent from the little guy
gastonw said:
By now you should be aware that you're in the wrong forum.
Sent from the little guy
Click to expand...
Click to collapse
what, then, is the appropriate forum for this model?
Epic Touch's forum.
Sent from the little guy