hey.... Can any say how to revert back to stock jellybean 4.1.1 :/
I have updated to JB yesterday and got a problem with custom Roms....so please ... say me how to go to stock again
thanks in advance
If you want stock Jb but want to keep root then flash the Jb stock Rom from the Development section and do a wipe
Sent from my HTC Desire X using Tapatalk
I don't want to install any stock Rom.. ;/ its bricking me with black screen
Related
Hi,
As the ICS is now available in India I wanted to know if I could install the stock ICS for my S29100 using KIES..
I already had flashed a custom ICS but wanted to install the stock ICS so I do not have any warranty issue also
will is it really safe to use triangle away, I already read about it in this forum:
http://forum.xda-developers.com/showthread.php?t=1494114
but is it really safe?
Yes, you should be safe if you have read it properly and understood what to do. However make a backup all the same.
Sent from my Amazon Kindle Fire using Tapatalk 2
Ok,just one more thing could i go back to my original GB 2.3.6 i now use custom ICS rom.
Sent from my GT-I9100 using XDA
gurjot86 said:
Ok,just one more thing could i go back to my original GB 2.3.6 i now use custom ICS rom.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yes u can go back to any stock rom of any country
I confirm that it is safe, I already use before. But you can flash stock ROM via Odin, this way is faster than Kies.
Noob question probably with a simple answer but i am a little confused so i'll ask.
I recently rooted my S3 and flashed the latest omega rom and siyah kernel, all is good for now.
I am on Android version 4.0.4, my question is when Jelly Bean is released and i want to update to it how do i go about it? Do i need to flash stock rom/firmware and upgrade via kies/OTA?
If i flash a Jelly Bean rom just now will my android version change to 4.1 or will i just have the jelly bean rom running on ICS
If someone could please explain it would be much appreciated, thanks.
U need 2 flash stock/official rom to get OTA updates from Samsung.
And if u flash Jelly beans then it wont be running upon ICS.
Ur version will change to 4.1 if u flash JB
Custom rom will also be JB based .
jje
Sent from my GT-I9300 using xda premium
When jb is released you just download the firmware from sammobile.com and flash with odin. No need to go back to stock.
Sent from my GT-I9300 using xda premium
Hey everyone, I would like to know if after I've installed the JB 4.1.2 Stock Leak on phone I could just restore it by flashing a ROM using Odin (the ROM that you can download from Sammobile) or I need to do something else?
Note: I got Philz CWM 6 Kernel and root on XXSJ.
Sorry if it is kind a noob's question, but thank you for your help.
Sent from my GT-I9100 using xda-developers app
Yes.
But do I need to change the kernel or can I keep Philz's?
Sent from my GT-I9100 JB 4.1.2 using XDA-Developers
i think philz is for JB....
Hello friends
I have s2 i9100 on 4.1.2 xxlsj official leaked odexed rom and rooted with philz cwm6..
I also have multiwindow mod running with no problem.
I want to remove the multiwindow mod ..should i flash the same 4.1.2 xxlsj again to do that or the stock 4.0.3 xwlp7..
Please help by suggesting the right procedure
Sent from my GT-I9100 using xda premium
if its not causing you a problem just turn it off in settings ??? but if you want it gone then either flash the recovery you made BEFORE you flashed the mod or the 4.1.2 rom its up to you.
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Yes you can, you're gonna have to root it tho.
Sent from my GT-I9100 using xda app-developers app
Thanks. Can I root present 2.3.6 Gingerbird and Install Custom Rom Omega v23 4.1.2 directly? Or I have to reinstall stock version 4.1.2 over current 2.3.6 Gingerbird?
Sent from my GT-I9100 using xda app-developers app
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I am not getting it. Please spoon feed me. I will be in debt.
I tried following steps:
I download Omega V23 custom rom and kernel - PhilZ-cwm6-XWLSN-OXX-4.93.6-signed and placed it on SDCard. After going into stock recovery I applied Philz Kernel via Stock Recovery. But getting error in red-
E:Failed to verify whole file signature
E:Signature verification failed
Please give me any solution. I dont have enough previlage to post into Android Development Forum as I am newbee here.
Sent from my GT-I9100 using xda app-developers app
dg081081 said:
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
slimlo said:
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
Click to expand...
Click to collapse
Yepp..You are not getting it. System is running GingerBread with Stock Recovery. I can make backup in CWM recovery only. But right now my problem is that Philz Kernel is not installing. It will give me CWM Recovery and it will root the device. Any solution for above error??
Sent from my GT-I9100 using xda app-developers app
philz does not work on gingerbread ------------->>>> Philz
slimlo said:
philz does not work on gingerbread ------------->>>> Philz
Click to expand...
Click to collapse
Then I have to flash stock 4.1.2 firmware via Odin Am I right?
Sent from my GT-I9100 using xda app-developers app