Hello Sir I have formated my phone with sp flash tool ,,,,,,,,,,, and do not have any recovery it gives while I tried to update it with an other custom Rom ,,,,,,,,,,,,,..
My Phones detail...
1. S4 Clone With Air Gesture.
2. Mtk 6575 (qualcomm fake) says mtk droid tools
3. 256 mb ram however shows 2gb ( i have checked using Sp FLash tool)
4. 8.9 GB internal Memory Shows,,,,,,, But in real usable only to 512mb
i have bricked my phone ,, and have made a backup using sp flash tool in the readback tab,,,,,,,,, but could not updat revive ,,,,,,,,,,,,,,
u can search in chinese phone forum, i hope u can get it
lol:good:
munawarsmd20 said:
Hello Sir I have formated my phone with sp flash tool ,,,,,,,,,,, and do not have any recovery it gives while I tried to update it with an other custom Rom ,,,,,,,,,,,,,..
My Phones detail...
1. S4 Clone With Air Gesture.
2. Mtk 6575 (qualcomm fake) says mtk droid tools
3. 256 mb ram however shows 2gb ( i have checked using Sp FLash tool)
4. 8.9 GB internal Memory Shows,,,,,,, But in real usable only to 512mb
i have bricked my phone ,, and have made a backup using sp flash tool in the readback tab,,,,,,,,, but could not updat revive ,,,,,,,,,,,,,,
Click to expand...
Click to collapse
hi did you have any luck with this
Related
Hello,
sorry for bad english, yesterday i tried to upgrade rom in my star n9500 mtk 6589 4gb hd 1280x720 and i put cwm recowery by mtk droid tools and downloaded rom from need room put it to sd card and soft brick stock on logo android i dont make any backup now i got more problem becouse tel wont start i use sp mdt flash and iv got brick... when i connect to usb its reconising aka mtk usb vcom port. Guys what can i do to bring life to my smartphone.
nurek20 said:
Hello,
sorry for bad english, yesterday i tried to upgrade rom in my star n9500 mtk 6589 4gb hd 1280x720 and i put cwm recowery by mtk droid tools and downloaded rom from need room put it to sd card and soft brick stock on logo android i dont make any backup now i got more problem becouse tel wont start i use sp mdt flash and iv got brick... when i connect to usb its reconising aka mtk usb vcom port. Guys what can i do to bring life to my smartphone.
Click to expand...
Click to collapse
Try to find a tool and flash the stock ROM back onto it. Get your hands on the stock ROM and if you can go into CWM then install the zip from there else use some tool to flash it from your computer.
Good luck!
Hit the thanks button if it helped! :laugh:
Im thinking about where i can found the oryginal rom, seller ? A the moment i cant go in CWM its only black screen when i press on button nothing happend ;/ Any sugesstion ?
Star n9500 unbricked!
Hi! I succesfully unbricked today my star n9500.
After trying to use thousands of roms, adb, fastboot, flashtool...etc
I used SP_Flash_Tool_5.1343.01 (as admin). The option was firmware update and without battery. The drivers were cdc-acm (manual instalation). And the only rom that worked for me (android 4.2.2) was N9500-6582-20131122_e2106_v82_jbaolg from needrom.
I have de 8gb ROM version.:good:
I have one bricked (stuck on recovery Mode) Lenovo Ideatab A1000L_F and one perfectly running same tab. i want to create rom backup from perfectly running one to flash it on bricked one using SPFT, but when i connect the working tab with MTK Droid Tools, it says MTK 8317 Hardware is FAKE!!!
Plz help me how can i take backup of rom to flash it on bricked tab....
Did you modify the hardware or edit build.prop?
Sent from my KFSOWI using Tapatalk
Whaaaat??
Resolved, but another problem
now i have gone through with my previous problem, after taking backup with MTK Droid Tools, now i want to flash it using SP Flash Tool, but the scatter is not loading.. it is giving this error... "the region begin address of one load region is not ascending sorting sequence !" what to do?
Spoofed Hardware
danishiqbal said:
I have one bricked (stuck on recovery Mode) Lenovo Ideatab A1000L_F and one perfectly running same tab. i want to create rom backup from perfectly running one to flash it on bricked one using SPFT, but when i connect the working tab with MTK Droid Tools, it says MTK 8317 Hardware is FAKE!!!
Plz help me how can i take backup of rom to flash it on bricked tab....
Click to expand...
Click to collapse
Often unscrupulous manufacturers will fake the CPU version on the phone. Making it show MTK6589, or MTK6592, when in reality the phone is a MTK6577 or MTK6575. MTK Droid Tools will tell you in the front page your phone's true SoC. It will also tell you your phone's LCD driver IC and uboot build V, as well as common information such as baseband version and kernel version.
Hello!
I've got bricked Mi2 fake on MTK6577. When up rom i fogot to readback rom
This phone was bricked because I flashed wrong firmware, but it still detects as "MTK USB Port" (Com5) when I plug it in and don't press any buttons on it.
I found & dowloaded many Rom file about mi2(fake) but when i flash phone with SP flash tool it always got this error: S_DA_DRAM_NOT_SUPPORT (3004) and when I use older Sp Flash Tool versions it ends with error: S_DL_GET_DRAM_SETTINGS_FAIL (5054). Even if I flash only PRELOADER and DSP_BL blocks.
This is infomation about phone:
Chip Mediatek MTK6577 core duo 1.5Ghz
Ram: 2GB
Internal storage: 4GB
Model number: MyRom
Android version: ICS 4.0.4
If someone have one same still working. Please readback Rom and give it to me. Maybe i can save my phone.
It’s my pleasure if you can help me. I’m so sad when is brick ! wish time would go back. tks
Help with MTK6572 HDC S5 G900F Dead For FlashTool
Good for all.
I have tried to update a HDC G900F S5 MTK 6572 with flash tool and start the process went wrong and now the computer does not detect my phone; but only shows instaladriver of device goes unidentified. I need help please.
The download of the rom needrom and it is this:
G900F.V111En20140522
I have a name copies made mtk tools but I can not restore because the phone does not turn me or detects the flash tool
Hello very interesting, but I have a clone of this cell phone is 1: 1 in every way besides is resistene water, has a real screen 5.1 "Full-HD, 2 GB Ram, 16 GB ROM, Camera 13 MP (16 MP interpolated) can know more about this phone here
www notimoviles com
Good for all.
I have tried to update a HDC G900F S5 MTK 6572 with flash tool and start the process went wrong and now the computer does not detect my phone; but only shows instaladriver of device goes unidentified. I need help please.
The download of the rom needrom and it is this:
G900F.V111En20140522
I have a name copies made mtk tools but I can not restore because the phone does not turn me or detects the flash tool[/QUOTE]
Please check if you have the proper drivers installed and that no other drivers conflict with the connection. your phone should be detectable by flash tool even after full format and hardest of brickings.
Do you have backup of your rom? (I mean files like lk or uboot, system, secro, preloader, boot, etc?)
Have you made scatter file?
Was your phone "Made in Korea"? (I'm asking because if yes then we may help eachother with bricked phones)
Hey guys i use chineese clone phone.yesterday i want to insttall costom rom.after using sp flash and dowload new rom to my phone.than phone goes brick.i prepare backup before rom installation.but sp flash tooll cooldn reconize my scatter file.after downloading file flash toll give ram error.how can i solwe this problem and un brick my phone.
phone model:clone jiayu JY-GS+ (elephone p6i) but my phone is mtk 6592 p6i 6582.
phone base band is: moly.wr8.w1315.md.wg.mp.v37 i need scatter file for this baseband chip please help
the Chinese clone phone should not be flash Rom, for their system are unstable