[Q] Upgrade Tablet OrangleCool TBTB800 with a better ROM - Android Q&A, Help & Troubleshooting

Hi,
Someone gave to me an Orange Cool Android 2.3 Tablet (it's a Brazilian brand, Model tb7800), complaining about slowness and hang ups.
I did some research with the aim of flashing a better ROM, however this model is not well-known and I'm kind of lost among all the different ROMs and architectures, so I would appreciate if someone could just point me in the right direction...
First of all: is there any better ROM compatible with this device? These are the details reported by CPU-Z:
Model: OR-TB7800 (rk29sdk)
Display: eng.koffu.20111209.175.607, 800x480
Android: 2.3.1, kernel architecture armv7l, kernel version 2.6.32.27
CPU: ARM Cortex A8, 1 core, rev. r3p2, 408Mhz-1Ghz
GPU: Vendor= Vivante Corp, Renderer=GC800 core.
Total RAM: 271 MB
Internal Storage: 1GB
Second: if the answer is yes, I would appreciate some hits with regards to the recommended ROM and flash procedure (just some hints, I'll do my homework and continue from there, I promise!). On the contrary, if the answer to the above is no, is there anything that you would recommend me besides rooting the device to uninstall some bloatware (Facebook, etc.). The IPS display seems good and the tablet is as new, it would be a shame if I can't find some good use for it...
Thanks in advance for the help,

Related

Custom rom for 7" amlogic a9 tablet (preferably honeycomb or above)

Hi, I was just wondering if there were any firmware upgrades for my tablet, it shipped with android 2.3.4, and its model number is 9587.
CPU Amlogic ARM Cortex-A9 MPCore Frequency: 800MHz(equivalent with Cortex A8 1.2GHz)
Display Size: 7 inch TFT Screen Resolution:800*480
DDR2/ROM 512MB/4GB
Operating System Android 2.2
Graphics Processor 2D/3D Accelerator GPU mali-400
Wireless Network Wifi(802.11g/b)
Touch Screen Double-touch Resistive
HDMI 720P(50Hz) 1080i/1080P(60Hz)
Interfaces DC(2.5mm) HDMI(mini 19pin) USB host*1 OTG*1
Earphone(3.5mm) TF Card Slot(up to 32GB)
this was pasted straight from ebay description.
although the description states it ships with 2.2, it is gingerbread.
If you need any other specs then just ask. thank you ;D
There isn't one available yet. May wanna search for a rom and try modifying it.
Please hit the thank you button if i helped!
try slatedroid.com or other android tablet related sites
help more!!
Techno developer, as i'm not a developer at all (yet!!) i was wondering how i would go about modifying a rom to work on it, like real basics
I would ask someone with more experience than me. May try someone like hashcode or koush.... they will be more helpful.
Please hit the thank you button if i helped!
ah ok
ok, thanks anyways
Sorry man, i know how to edit roms that have already been made and make apps, but making a rom work on another phone is past me.

[Q] Rooting an ACHO C906 (Chinese Tablet) - Help

Hi all,
I'm looking into how to root android tablets before I buy one. The tablet I'm interested in is the ACHO C906, I'll post a few specs:
Model: ACHO C906
CPU: Rockchip RK2918, Cortex A8
OS: Android 4.0 OS
Memory: DDRIII 1GB
Nandflash: 8GB
LCD Display: 9.7 Inch Capacitive Screen, IPS, 4:3, 1024×768
WIFI: Yes, 802.11 b/g/n
Multi-Touch: Yes, 10-points touch screen
It would be running Icecream Sandwich, so I'm just wondering if anyone has had experience with rooting cheap chinese (basically unbranded) android tablets? Do any of the general rooting methods work like superoneclick etc?
Any help is greatly appriciated =)
Anyone got any ideas? I'm not new to rooting, I've done it a few times before, but I would just like a point in the right direction Or for someone to tell me it's not possible, if thats the case.
No one here has any input at all?
TheReverendTholemewPlague said:
Hi all,
I'm looking into how to root android tablets before I buy one. The tablet I'm interested in is the ACHO C906, I'll post a few specs:
Model: ACHO C906
CPU: Rockchip RK2918, Cortex A8
OS: Android 4.0 OS
Memory: DDRIII 1GB
Nandflash: 8GB
LCD Display: 9.7 Inch Capacitive Screen, IPS, 4:3, 1024×768
WIFI: Yes, 802.11 b/g/n
Multi-Touch: Yes, 10-points touch screen
It would be running Icecream Sandwich, so I'm just wondering if anyone has had experience with rooting cheap chinese (basically unbranded) android tablets? Do any of the general rooting methods work like superoneclick etc?
Any help is greatly appriciated =)
Click to expand...
Click to collapse
Hello friend ... I need to be root like you .. could do?
I have this tablet and SuperOneClick not work.
Not yet found a method to root.
I have the tablet with me, you can try to root?
I'm glad I'm not the only one with this problem, hopefully someone who knows the answer will post a reply soon.
I haven't bought a tablet yet, I'm just seeing if it is possible to root before I buy it, but I guess I can rule superoneclick off the list
Have you tried any other methods? Maybe 'Doomlord's easy rooting toolkit'?
rooting use toolkit and does not work.
Although no program to root to run ICS ...
It seems that all of the rooting methods that may work are made for android 2.x and there is no ICS support.
Looks like we won't be rooting the tablet until someone creates a new exploit for it, which seems unlikely considering how unknown the tablet is.
Thanks for the help anyway!
ROOT Android 4.0.3
instruction:
1. Download RK29 drive standard
2. Copy the contents of the folder the driver ACHO program (found in PC / program files / acho / driver) to the driver folder SuperOneClick program.
3. Start SuperOneClick.
4. ROOT.
Source: http://4pda.ru/forum/index.php?showtopic=320020&st=40
http://4pda.ru/forum/index.php?showtopic=286289&st=2060 entry10821512 post # 2079
ZBS A1000 Android 4.0 7 inch
Hi, Does it apply for ZBS A1000 too ?
Here is a few specs:
CPU: Rockchip 2918 1.2GHz
OS: Google Android 4.0.3
Kernel version: 3.0.8+ [email protected] #239
Build number: RK2918_Android4.0.3-SDK_V2.10_20120205
RAM: 512MB DDR3
Flash Memory: 8GB
Support TF card extend 32GB max
Display: 7 inch TFT LCD capacitive multi-touch panel
Camera: 0.3 Mega Pixel Front
Battery: 3800mAh
Networking: Wifi 802.11 - 150 Mbps b/g/n
Support 1080P Video
Support Video Chat
GPS: Yes
G-sensor: Yes
I have tried SuperOneClick, but no responded, since when I chose USB Debugging and plug into my laptop, it was discovered as Linux USB Disk or something like a portable disk not a phone.
Perhaps, I couldn't find a driver for this tablet, and I believed most of tablets from China doesn't provide us those driver, so the question is where can I find driver and how to root it ?
Any help is greatly appriciated =)
zebyuz.... I have a similar tablet. It's a DOPO MD 740, has the same processor, build number, the kernel is a 3.0.8+ but has a different address... [email protected]#153. Mine has a bit more RAM but that really shouldn't be an issue with a root process.
Also, like you, I can not get adb to recognize the tablet as anything other than mass storage. I have a suspicion that many of these different chinatabs will be able to use one root program.
So much of that is the same as my dopo 702, I was wondering if I could simply download the firmware available for the 740 and have it work. From the build specs it looks like it's the same rk2918 just the 740 is overclocked to 1.2GHz where the 702 is at 1Gz. If that is the case the double root file for the 702 might work? Or would the different firmware close that door?
any rom for this tablet??
help from anybody with zbs A1000
Can you do me a favour relating to zbs A1000 tablet? I have experience with this tablet very much. And i know many things about it.
zbeyuz said:
Hi, Does it apply for ZBS A1000 too ?
Here is a few specs:
CPU: Rockchip 2918 1.2GHz
OS: Google Android 4.0.3
Kernel version: 3.0.8+ [email protected] #239
Build number: RK2918_Android4.0.3-SDK_V2.10_20120205
RAM: 512MB DDR3
Flash Memory: 8GB
Support TF card extend 32GB max
Display: 7 inch TFT LCD capacitive multi-touch panel
Camera: 0.3 Mega Pixel Front
Battery: 3800mAh
Networking: Wifi 802.11 - 150 Mbps b/g/n
Support 1080P Video
Support Video Chat
GPS: Yes
G-sensor: Yes
I have tried SuperOneClick, but no responded, since when I chose USB Debugging and plug into my laptop, it was discovered as Linux USB Disk or something like a portable disk not a phone.
Perhaps, I couldn't find a driver for this tablet, and I believed most of tablets from China doesn't provide us those driver, so the question is where can I find driver and how to root it ?
Any help is greatly appriciated =)
Click to expand...
Click to collapse

Help, I need ROM files for Goophone I5 v2 MTK 6589

Hi friends,
I need to refresh ROM in my Goophone i5 V2 MTK 6589 JB
Do you have any backup (oficial, unoficial) of your ROM, please?
My ROM doesnt work...
Thanks for your time.
! I join this request. !
I bought it in gadgetgreats after 15 days and not even tell me where to get the firmware.
Where you bought your?
Mine say it has 2GB of RAM and 8 rom
Good luck
onakvee said:
Hi friends,
I need to refresh ROM in my Goophone i5 V2 MTK 6589 JB
Do you have any backup (oficial, unoficial) of your ROM, please?
My ROM doesnt work...
Thanks for your time.
Click to expand...
Click to collapse
Unfortunately, my phone is FAKE!
I bought a phone from DEALSPRIME!
They declared that the phone is type Goophone i5 II with "quad core" procesor MTK 6589 and screen resolution 1280x720 pix., but you sent me type Goophone i5 with "dual core" procesor MTK 6577 and screen resolution 840x480 pix. which is cheaper...
The phone displays Antutu benchmark (preinstalled) the same data as you wright on their web page, but the other diagnostic programs (android software info or mtk droid tools) displaying different data.....!!!!!!!!!!
Onakvee do you still have the phone?
If so could you do a scatter ROM download for all of us to use that were unfortunately scammed by Dealsprime
Or could you PM me with a scatter ROM from yours as I tried installing a Goophone ROM which obviously didnt work as its a ALPS version and need to return it to original state and forgot to back up first what a numpty i am.
kind regards and thanks for your time
Hi Meecha1,
I still have my phone....
I created a backup using the MTK Tools Droid, but unfortunately it is not complete : (
Is there some mistake ...
PS:
I sent to PM next information.
Backup everything apart with SP Flash Tools (found in various places on this forum) just follow the MTK6577 instructions.
Then get MTK Droid Tools and use "Prepare blocks for Flash Tool". Typically the DSP/Preloader extracts from SP Flash Tool need adjusting. I usually do a raw read for the whole device apart upto the data area.
Hi,
During "Prepare blocks for Flash Tool" the process shows errors.
See this screen:
http://img835.imageshack.us/img835/9698/mtkdroidtoolserror.jpg
Best regards
Maybe its the 6589 after all, hard to say. I heard it's the firmware they used on the first release that's the problem, but who knows really, will find out the truth in the end. Someone reported that elixir 2 found the correct specs and that its MT6589 just that 2 cores are not being used on the firmware. Unfortunately I don't have the phone any more as I gave it away as a gift to my friend so can't perform any tests or grab the ROM data you need. If it is only dual core, I doubt any resellers would of even known, resellers are not so tech savy, they just sell the specs what they are told when they purchase from factories.
The ability to diagnose specs is fairly limited for a reseller. When I had the phone in my possession I watched a few review vids to find out more info and one was from the reseller you mentioned and funnily enough they did an antutu and it showed up as dual core, so it's not like they are trying to hide that antutu says that.
Good luck in your quest!
hello.
I think we have the same goophne.
I read with mobileuncletools:
Ok root (superuser already installed)
CPU
Processor = 7 ARMV processor rev. 0 (V7L)
= MT6589 hardware (really?)
KERNEL
Version3.0.13 = linux kernel (root @ versionserver-desktop) (gcc version 4.4.3 (GCC)) # 1 SMP PREEMPT fri 8 March 2013 14:13:50 CSt
OS
Brand = alps
Models = iPhone5
Product = mobitak77_m01_ics2
Display = ALPS.ICS2.MP.V1.18
SCREEN
Width = 480
Higth = 854
Density = 240 Dpi
RAM MEMORY
Mem total = 1922480Kb
it is very nice and is very fast (1536MHz (x2) with AnTuTu Benchmark 8540) but I have a problem. the phone does not mount sd card.
gabriele75 said:
hello.
I think we have the same goophne.
I read with mobileuncletools:
Ok root (superuser already installed)
CPU
Processor = 7 ARMV processor rev. 0 (V7L)
= MT6589 hardware (really?)
KERNEL
Version3.0.13 = linux kernel (root @ versionserver-desktop) (gcc version 4.4.3 (GCC)) # 1 SMP PREEMPT fri 8 March 2013 14:13:50 CSt
OS
Brand = alps
Models = iPhone5
Product = mobitak77_m01_ics2
Display = ALPS.ICS2.MP.V1.18
SCREEN
Width = 480
Higth = 854
Density = 240 Dpi
RAM MEMORY
Mem total = 1922480Kb
it is very nice and is very fast (1536MHz (x2) with AnTuTu Benchmark 8540) but I have a problem. the phone does not mount sd card.
Click to expand...
Click to collapse
good jod
Hi Gabriele75,
I have the same phone as well, where did you buy yours?, my SD card died and I had to replace it (used a 16g instead), can you read the card when put in a computer? Personally I would replace it with a 16g or 32g then try resolving the mounting problem it may be a faulty card.
Just wondering if you have made a full ROM back up using SP Flash or MTK Droid? If you have or are willing too, please upload to a freeware site with a link on here please for those of us that need a copy to revive our phones.
kind regards
Hi friends!
Unfortunately, my concerns are justified....
- Linux kernel is only 3.0.13 is too low to run Android 4.1 let alone 4.2. You need a 3.4.0 kernel for Jelly Bean.
- It is the only MTK6589 phone available to support 3G outside of 850/2100. Those frequencies are for the MTK6577, which does support those bands.
- CPU Model: Dual Core A7… Bit weird, isn’t it meant to be a quad core chip?
- Invalid GPU SGX531, which just happens to be the MTK6577 GPU. The MTK6589 chipset uses the SGX544. The chipset comes with CPU, GPU, and the modem all together you cannot chop and change them.
- Processor works on ~ 1.5Ghz. Every credible MTK6589 device (THL W8, Zopo, etc) is 1.2Ghz.
Can you verify this for videos on youtube ...
I sent the phone back to the seller.
Best regards,
onakvee said:
Hi friends!
Unfortunately, my concerns are justified....
- Linux kernel is only 3.0.13 is too low to run Android 4.1 let alone 4.2. You need a 3.4.0 kernel for Jelly Bean.
- It is the only MTK6589 phone available to support 3G outside of 850/2100. Those frequencies are for the MTK6577, which does support those bands.
- CPU Model: Dual Core A7… Bit weird, isn’t it meant to be a quad core chip?
- Invalid GPU SGX531, which just happens to be the MTK6577 GPU. The MTK6589 chipset uses the SGX544. The chipset comes with CPU, GPU, and the modem all together you cannot chop and change them.
- Processor works on ~ 1.5Ghz. Every credible MTK6589 device (THL W8, Zopo, etc) is 1.2Ghz.
Can you verify this for videos on youtube ...
I sent the phone back to the seller.
Best regards,
Click to expand...
Click to collapse
You bought a fake of a fake. There is NO MTK6589 in an iPhone fake available. I made a backup of such thing with MTKDroid, you can download it here:
http://www.filefactory.com/file/46rs1lht4uep/n/iPhone_130125_backup_130417-152744_zip
In fact you may bought a device with mtk6575 and 480 x 854 pixel.
dragon-tmd said:
You bought a fake of a fake. There is NO MTK6589 in an iPhone fake available. I made a backup of such thing with MTKDroid, you can download it here:
http://www.filefactory.com/file/46rs1lht4uep/n/iPhone_130125_backup_130417-152744_zip
In fact you may bought a device with mtk6575 and 480 x 854 pixel.
Click to expand...
Click to collapse
Hi,
thank you for your answer!
Also, I figured it out ...
I sent the phone back to the seller. I waiting for a refund...
Best regards!
dragon-tmd said:
You bought a fake of a fake. There is NO MTK6589 in an iPhone fake available. I made a backup of such thing with MTKDroid, you can download it here:
http://www.filefactory.com/file/46rs1lht4uep/n/iPhone_130125_backup_130417-152744_zip
In fact you may bought a device with mtk6575 and 480 x 854 pixel.
Click to expand...
Click to collapse
He has this http://www.fastcardtech.com/Goophone-i5-N2-V2 with MTK6577 and 854x480 screen.
Anyone know where I can get rom for goophone i5 n2 v2? thank you.
JankyLV said:
Anyone know where I can get rom for goophone i5 n2 v2? thank you.
Click to expand...
Click to collapse
Have you been here?
http://www.needrom.com/mobile/goophone-n2/
MayhemVC said:
Have you been here?
http://www.needrom.com/mobile/goophone-n2/
Click to expand...
Click to collapse
Yes, but it's not the same model.
For reference:
http://www.fastcardtech.com/Goophone-i5-N2-Lte
http://www.fastcardtech.com/Goophone-i5-N2-V2
I'm on the same boat. I bought a fake of a fake too. All I want is a rom for the Goophone i5 N2 V2 to see if the phones atleast any use..
Cheers
Dan
Someone please test asphalt 8 on qhd mtk6589 quad core phone on high graphic settings and tell me if it lags

[Q] [Help] iPhone 5 clone root/rom

Hello,
A month ago I bought an iPhone 5 clone from AliExpress.
It works great and so but they are some Chinese apps I want to get rid of that you can not reinstall then I would also have the regular app store market right now I have black market.
can I fix it by root or install a different rom? and how?
The phone has 2 GB ram but it always uses 1.8 to 1.9 GB ram though I do not have anything on and just restart the phone. Will this also resolve itself if I reinstall it with a new rom?
I do not know the model of the phone, but they believe is a alps iphone 5 clone and therefore does not know what to search for rom.
I would prefer to install a new rom
Here is some information about the phone that I receive
System
Model: iPhone 5
Manufacture: alps
Device: prowave77_ics2
Product: prowave77_ics2
Brand: iPhone
Android version: 4.2.1 (Ice Cream Sandwich)
API Leve: 15
Build ID: IMM76D
Fingerprint: iPhone/prowave77_ics2/prowave77_ics2:4.2.1/IMM76D/1377588089:user/test-keys
Processor
Processor: ARMv7 (Four-core)
Cores: 4
Max Frequency 2001Mhz
Instruction Sets armeabi-v7a, armeabi
SIMD Instruction: NEON
Memory
System RAM: 2047MB
JVM Max Memory: 64MB
Internal Storage: 155MB free (2GB totaly)
External Storage: 5800MB free (16GB totatly)
Back camera 8MP
Front camera 0,3MP
6 Sensors
Yamaha530 and S628 Magnetic Field Sensor
OpenGL 1.X and OpenGL 2.0: PowerVR SGX 531
Features
OpenGL 2.0
bluetootj
camera
camera autofocus
camera front
faketouch
location
logaton gps
location network
microphone
screen landscape
screen portrait
and a bunch of more
If you need some thing more tell me in PM or comment below
A big thanks if you help me
BUMP
Can some one help me with this i really need this to work !
Lol thats an improvement, an iPhone with android on it
I dont think many people have, or will have this phone ever, so unfortunately if you want anything done to it, you will probably have to do it yourself.
There are alot of threads on how to do everything you need.
You can extract your current rom, edit it however you want, then put it back
RichyRicho said:
Lol thats an improvement, an iPhone with android on it
I dont think many people have, or will have this phone ever, so unfortunately if you want anything done to it, you will probably have to do it yourself.
There are alot of threads on how to do everything you need.
You can extract your current rom, edit it however you want, then put it back
Click to expand...
Click to collapse
Thank you for the reply and tips.
there is not a real iphone 5 but a clone.
I will try to copy the rom and edit it etc. when im done i can upload it here so if someone else have the problem i have they just can get the rom.
Can you give me some useful links where i can read more? i guess there is some drivers that need to be copied.
hello maxkaxx,
do you know which is the exact name of this phone, coz i have the same as you, but in mine there is any chinese app
c0ldw1nd said:
hello maxkaxx,
do you know which is the exact name of this phone, coz i have the same as you, but in mine there is any chinese app
Click to expand...
Click to collapse
No sorry, I don't know.
But I have rooted mine, freezed the chinese apps with titatium backup and have made a backup on the whole phone and rom (i think)
how do i do to make the .backup file to a rom file ?
how do i edit the rom file etc..
maxkaxx said:
No sorry, I don't know.
But I have rooted mine, freezed the chinese apps with titatium backup and have made a backup on the whole phone and rom (i think)
how do i do to make the .backup file to a rom file ?
how do i edit the rom file etc..
Click to expand...
Click to collapse
As far as I know you have to make a nandroid backup, then there is some program that converts it into a flashable zip or something like that. Have you got CWM installed?
Search google how to make a backup of android rom and restore
Don't know
RichyRicho said:
As far as I know you have to make a nandroid backup, then there is some program that converts it into a flashable zip or something like that. Have you got CWM installed?
Search google how to make a backup of android rom and restore
Click to expand...
Click to collapse
I have Search on google but i don't get any good results, I have installed the rom manager from CWM but when i boot the phone in cwm mode i get the standard one thats on the phone. i have installed 5.x.x says the rom manager but i can't acces it...
do you know the name of the program that make the backup to a zip or flashable rom/thing ?
maxkaxx said:
I have Search on google but i don't get any good results, I have installed the rom manager from CWM but when i boot the phone in cwm mode i get the standard one thats on the phone. i have installed 5.x.x says the rom manager but i can't acces it...
do you know the name of the program that make the backup to a zip or flashable rom/thing ?
Click to expand...
Click to collapse
http://www.addictivetips.com/android/make-nandroid-backups-on-android-without-booting-into-recovery/
need help rooting my device
Iphone 5C replica/fake/china
Brand Samsung
Model N5
Android OS 4.2.2
Cpu Model Dual-core ARMv7 processor (VFPv4, NEON)
Android SDK 17(Android 4.2.x)
kernel linux version 3.4.5
kevinress said:
need help rooting my device
Iphone 5C replica/fake/china
Brand Samsung
Model N5
Android OS 4.2.2
Cpu Model Dual-core ARMv7 processor (VFPv4, NEON)
Android SDK 17(Android 4.2.x)
kernel linux version 3.4.5
Click to expand...
Click to collapse
First off Its not a samsung. Second the N5 stands for a Nexus 5 which it is not.
You are out of luck on these devices. You will find almost no help here. Seldom is any work done on cheap Chinese knock off devices.
kevinress said:
need help rooting my device
Iphone 5C replica/fake/china
Brand Samsung
Model N5
Android OS 4.2.2
Cpu Model Dual-core ARMv7 processor (VFPv4, NEON)
Android SDK 17(Android 4.2.x)
kernel linux version 3.4.5
Click to expand...
Click to collapse
Hi,
Try to use alephzain's Framaroot 1.8.1 as I've tried using it on my friend's cloned iPhone 5 and it worked.
Hope it will work for you too!
help me
maxkaxx said:
Hello,
A month ago I bought an iPhone 5 clone from AliExpress.
It works great and so but they are some Chinese apps I want to get rid of that you can not reinstall then I would also have the regular app store market right now I have black market.
can I fix it by root or install a different rom? and how?
The phone has 2 GB ram but it always uses 1.8 to 1.9 GB ram though I do not have anything on and just restart the phone. Will this also resolve itself if I reinstall it with a new rom?
I do not know the model of the phone, but they believe is a alps iphone 5 clone and therefore does not know what to search for rom.
I would prefer to install a new rom
Here is some information about the phone that I receive
System
Model: iPhone 5
Manufacture: alps
Device: prowave77_ics2
Product: prowave77_ics2
Brand: iPhone
Android version: 4.2.1 (Ice Cream Sandwich)
API Leve: 15
Build ID: IMM76D
Fingerprint: iPhone/prowave77_ics2/prowave77_ics2:4.2.1/IMM76D/1377588089:user/test-keys
Processor
Processor: ARMv7 (Four-core)
Cores: 4
Max Frequency 2001Mhz
Instruction Sets armeabi-v7a, armeabi
SIMD Instruction: NEON
Memory
System RAM: 2047MB
JVM Max Memory: 64MB
Internal Storage: 155MB free (2GB totaly)
External Storage: 5800MB free (16GB totatly)
Back camera 8MP
Front camera 0,3MP
6 Sensors
Yamaha530 and S628 Magnetic Field Sensor
OpenGL 1.X and OpenGL 2.0: PowerVR SGX 531
Features
OpenGL 2.0
bluetootj
camera
camera autofocus
camera front
faketouch
location
logaton gps
location network
microphone
screen landscape
screen portrait
and a bunch of more
If you need some thing more tell me in PM or comment below
A big thanks if you help me
Click to expand...
Click to collapse
can I ask you please sir
i have a problem my iphone clone 5c bootloop
whether there is a custom rom for master 5c iphone clone
if there is I am very grateful
spec mobile phone same as my lord
I've been looking on google but never found a suitable rom for 5c iphone clone phones
please my lord
hi
i wanted to ask u that my charging cable for iphone 5c (korean) is not working.... so can the original apple cable charge my phone?
qwerwre1 said:
i wanted to ask u that my charging cable for iphone 5c (korean) is not working.... so can the original apple cable charge my phone?
Click to expand...
Click to collapse
Hey,
This is not a right place for this.

[Q] Unknown android mobile ROMs

Hello guys
I own a Nuqleo Eleqtron cellphone with android ICS. and i wanted to know if theres any chance to upgrade to kitkat.
Theres nothing in the web about this device, no suport from the greater developers like CM either.
It specs are:
Proc: MTK 6577
Ram: 512mb
Rom: 4gb
Cam: 5mpx rear, 0,3 frontal
Screen: 4"
And stock ICS rooted.
I tried to look for some similar spec phone on the web, but didnt know how to port it for my device, without screw it up. Im really willing to find the magic recipe to make my way to kitkat but its really confusing.
Thanks for advance.

Categories

Resources