[Q] Rooting an ACHO C906 (Chinese Tablet) - Help - Android Q&A, Help & Troubleshooting

Hi all,
I'm looking into how to root android tablets before I buy one. The tablet I'm interested in is the ACHO C906, I'll post a few specs:
Model: ACHO C906
CPU: Rockchip RK2918, Cortex A8
OS: Android 4.0 OS
Memory: DDRIII 1GB
Nandflash: 8GB
LCD Display: 9.7 Inch Capacitive Screen, IPS, 4:3, 1024×768
WIFI: Yes, 802.11 b/g/n
Multi-Touch: Yes, 10-points touch screen
It would be running Icecream Sandwich, so I'm just wondering if anyone has had experience with rooting cheap chinese (basically unbranded) android tablets? Do any of the general rooting methods work like superoneclick etc?
Any help is greatly appriciated =)

Anyone got any ideas? I'm not new to rooting, I've done it a few times before, but I would just like a point in the right direction Or for someone to tell me it's not possible, if thats the case.

No one here has any input at all?

TheReverendTholemewPlague said:
Hi all,
I'm looking into how to root android tablets before I buy one. The tablet I'm interested in is the ACHO C906, I'll post a few specs:
Model: ACHO C906
CPU: Rockchip RK2918, Cortex A8
OS: Android 4.0 OS
Memory: DDRIII 1GB
Nandflash: 8GB
LCD Display: 9.7 Inch Capacitive Screen, IPS, 4:3, 1024×768
WIFI: Yes, 802.11 b/g/n
Multi-Touch: Yes, 10-points touch screen
It would be running Icecream Sandwich, so I'm just wondering if anyone has had experience with rooting cheap chinese (basically unbranded) android tablets? Do any of the general rooting methods work like superoneclick etc?
Any help is greatly appriciated =)
Click to expand...
Click to collapse
Hello friend ... I need to be root like you .. could do?
I have this tablet and SuperOneClick not work.
Not yet found a method to root.
I have the tablet with me, you can try to root?

I'm glad I'm not the only one with this problem, hopefully someone who knows the answer will post a reply soon.
I haven't bought a tablet yet, I'm just seeing if it is possible to root before I buy it, but I guess I can rule superoneclick off the list
Have you tried any other methods? Maybe 'Doomlord's easy rooting toolkit'?

rooting use toolkit and does not work.
Although no program to root to run ICS ...

It seems that all of the rooting methods that may work are made for android 2.x and there is no ICS support.
Looks like we won't be rooting the tablet until someone creates a new exploit for it, which seems unlikely considering how unknown the tablet is.
Thanks for the help anyway!

ROOT Android 4.0.3
instruction:
1. Download RK29 drive standard
2. Copy the contents of the folder the driver ACHO program (found in PC / program files / acho / driver) to the driver folder SuperOneClick program.
3. Start SuperOneClick.
4. ROOT.
Source: http://4pda.ru/forum/index.php?showtopic=320020&st=40
http://4pda.ru/forum/index.php?showtopic=286289&st=2060 entry10821512 post # 2079

ZBS A1000 Android 4.0 7 inch
Hi, Does it apply for ZBS A1000 too ?
Here is a few specs:
CPU: Rockchip 2918 1.2GHz
OS: Google Android 4.0.3
Kernel version: 3.0.8+ [email protected] #239
Build number: RK2918_Android4.0.3-SDK_V2.10_20120205
RAM: 512MB DDR3
Flash Memory: 8GB
Support TF card extend 32GB max
Display: 7 inch TFT LCD capacitive multi-touch panel
Camera: 0.3 Mega Pixel Front
Battery: 3800mAh
Networking: Wifi 802.11 - 150 Mbps b/g/n
Support 1080P Video
Support Video Chat
GPS: Yes
G-sensor: Yes
I have tried SuperOneClick, but no responded, since when I chose USB Debugging and plug into my laptop, it was discovered as Linux USB Disk or something like a portable disk not a phone.
Perhaps, I couldn't find a driver for this tablet, and I believed most of tablets from China doesn't provide us those driver, so the question is where can I find driver and how to root it ?
Any help is greatly appriciated =)

zebyuz.... I have a similar tablet. It's a DOPO MD 740, has the same processor, build number, the kernel is a 3.0.8+ but has a different address... [email protected]#153. Mine has a bit more RAM but that really shouldn't be an issue with a root process.
Also, like you, I can not get adb to recognize the tablet as anything other than mass storage. I have a suspicion that many of these different chinatabs will be able to use one root program.

So much of that is the same as my dopo 702, I was wondering if I could simply download the firmware available for the 740 and have it work. From the build specs it looks like it's the same rk2918 just the 740 is overclocked to 1.2GHz where the 702 is at 1Gz. If that is the case the double root file for the 702 might work? Or would the different firmware close that door?

any rom for this tablet??

help from anybody with zbs A1000
Can you do me a favour relating to zbs A1000 tablet? I have experience with this tablet very much. And i know many things about it.
zbeyuz said:
Hi, Does it apply for ZBS A1000 too ?
Here is a few specs:
CPU: Rockchip 2918 1.2GHz
OS: Google Android 4.0.3
Kernel version: 3.0.8+ [email protected] #239
Build number: RK2918_Android4.0.3-SDK_V2.10_20120205
RAM: 512MB DDR3
Flash Memory: 8GB
Support TF card extend 32GB max
Display: 7 inch TFT LCD capacitive multi-touch panel
Camera: 0.3 Mega Pixel Front
Battery: 3800mAh
Networking: Wifi 802.11 - 150 Mbps b/g/n
Support 1080P Video
Support Video Chat
GPS: Yes
G-sensor: Yes
I have tried SuperOneClick, but no responded, since when I chose USB Debugging and plug into my laptop, it was discovered as Linux USB Disk or something like a portable disk not a phone.
Perhaps, I couldn't find a driver for this tablet, and I believed most of tablets from China doesn't provide us those driver, so the question is where can I find driver and how to root it ?
Any help is greatly appriciated =)
Click to expand...
Click to collapse

Related

Alcatel T10

hi all,
im new to android and i successfully rooted the tablet (if anyone is having trouble rooting T10, im more then happy to help), and now id like to put a custom rom on it of course , but the problem is there arent any that are specifically for Alcatet T10. Id like to try cyanogen or AOKP, but they all focus on specific devices and since there arent any for T10 i dont know which one to chose. More specifically id like to know where does T10 fits in similarity or what not with the other models (tablet, phones) and if there are any that are similar can i use that ROM to install on T10. I just need to know if something bad can happen if I use ROM which is not specifically for T10, and if something goes wrong can I return to stock ROM?
any help is very appriciated, tnx in advance
tablet specs are:
Operating System : Android 4.0.3 Ice Cream Sandwich
Application Processor : Rockchip RK2918
CPU : 1GHz Cortex A8
System Memory : 1 GB DDR3
Storage Capacity : 4 GB NAND Flash
Wi-Fi : 802.11 b/g/n
Audio & Video Play : Built-in audio chip, 1080P HD playback
External Interface : Micro USB, Micro SD
Battery : 3000 mAh, 3.7V Lithium
Camera : Front camera 0.3Mpixel
wiki,cyanogenmod,org/w/P1c_Info --- remove coma and put dots
Samsung Galaxy Tab (CDMA) official cynogenmod ROM
what do you think about this one? its the most similar, has the same CPU, and T10 has 512Mb more RAM
a simple yes/no/maybe would suffice
Rooting T10
Hi,
I am at my wit's end. Trying to root the Alcatel T10. Each time I put it in debut mode and plug it in the USB, my pc just gives the "beep-beep-beep" of device not connected. On my device manager screen, the device shows as Other devices | one, and any attempt to install and/or update drivers just end in miserable failure.
In the past I have successfully rooted my Samsung Galaxy Gio, and Pocket, and unbricked my son's phone after he tried the same, so I'm not completely clueless in this regard. I just cannot get my T10 to connect to my PC in debug mode...
Any and all help will really be appreciated.
Since you say you have successfully rooted yours, maybe you can just point me in the right direction.
Thanks!

[Q] Upgrade Tablet OrangleCool TBTB800 with a better ROM

Hi,
Someone gave to me an Orange Cool Android 2.3 Tablet (it's a Brazilian brand, Model tb7800), complaining about slowness and hang ups.
I did some research with the aim of flashing a better ROM, however this model is not well-known and I'm kind of lost among all the different ROMs and architectures, so I would appreciate if someone could just point me in the right direction...
First of all: is there any better ROM compatible with this device? These are the details reported by CPU-Z:
Model: OR-TB7800 (rk29sdk)
Display: eng.koffu.20111209.175.607, 800x480
Android: 2.3.1, kernel architecture armv7l, kernel version 2.6.32.27
CPU: ARM Cortex A8, 1 core, rev. r3p2, 408Mhz-1Ghz
GPU: Vendor= Vivante Corp, Renderer=GC800 core.
Total RAM: 271 MB
Internal Storage: 1GB
Second: if the answer is yes, I would appreciate some hits with regards to the recommended ROM and flash procedure (just some hints, I'll do my homework and continue from there, I promise!). On the contrary, if the answer to the above is no, is there anything that you would recommend me besides rooting the device to uninstall some bloatware (Facebook, etc.). The IPS display seems good and the tablet is as new, it would be a shame if I can't find some good use for it...
Thanks in advance for the help,

[Q] Unknown android mobile ROMs

Hello guys
I own a Nuqleo Eleqtron cellphone with android ICS. and i wanted to know if theres any chance to upgrade to kitkat.
Theres nothing in the web about this device, no suport from the greater developers like CM either.
It specs are:
Proc: MTK 6577
Ram: 512mb
Rom: 4gb
Cam: 5mpx rear, 0,3 frontal
Screen: 4"
And stock ICS rooted.
I tried to look for some similar spec phone on the web, but didnt know how to port it for my device, without screw it up. Im really willing to find the magic recipe to make my way to kitkat but its really confusing.
Thanks for advance.

Allwinner a10 unfit screen after custom Rom flash

Dear XDA Masters
Greetings
I have this tablet
Allwinner A-10 quad core processor with 1 GB DDR3 on board dedicated RAM.Comes with Android 4.0.3 ICS OS.It has got a 7 inch Retina IPS (Instant Plane Switching) with 5 point multi touch capacitive display
it got a SuperHD 7 inch Retina A quad core Maili 400 GPU.In built 3G module with single sim slot. 8 gb nand flash. 1024*600 resolution.
After trying with more than 30 Roms for jelly bean, now I flashed with a Rom which was made for 9.7 inch device. I have bellow problems
a. can not see the buttom of display, as well as home, back keys. I tried by lowering LCD value to 130 from build prop but no luck.
b. I can see only 4 gb of my 8 gb internal storage.
c. touch inverted(got solution in another thread)
my USB debugging on so I can modify this Rom even before flash. but I don't have the stock Rom.please kindly help. thanks a lot in advance.
in picture first one is my current display, second one is like it should be.
Nobody????
Anybody. ......... nobody?????????
st_rock said:
Anybody. ......... nobody?????????
Click to expand...
Click to collapse
OK.. Firstly lets figure out what kind of tab you actually have, the A10 is a single Core SOC not quad core
so if it is truly a quad core it is most likely an A31 if it is Allwinner. Before Flashing Roms it would be best
to determine what SOC is in use first so once you have confirmed that we can work from there.
Thanks
Thanks for your kind reply. first when I connect to USB it says A10. but my reseller said a13. livesuit said invalid id for Roms made for a13. only this Rom (for A10) from modecom got flushed successfully. ww---w.modecom.eu/freetab_97011/tablety2/product/
then I used USB mouse, install cpv identifier, got a10. here is the uberizer snap for you too. again, as far I know, a10 doesn't have HDMI and Bluetooth, but in my device, there is HDMI port, though I didn't test. thanks again for your time..... I am so worried......

Android x86 help

I am got a new Tablet whit Windows 10
(TrekStor SurfTab® duo W1 3G
Prozessor (CPU) Intel® Atom™ x5-Z8300 Prozessor (bis zu 1.84 GHz, 2 MB Intel® Smart-Cache)
Arbeitsspeicher (RAM) 2 GB (DDR3)
Interner Speicher 32 GB*
Grafikprozessor (GPU) Intel® HD Graphics
Inclusive Keyboard Dock)
And now i got a question.
Is it possible to use Android x86 on it whitout any installations problems?
Curse Windows is good but Android is better
I am get this tablet from a friend for 150$ so why not. But i got allready 5 windows pcs/ Laptops.
So i will check if i can use Android x86 on the Tablett.
I hope anyone can help me out
Sry for my bad english x.x
Hi !
I think i am close using Chuwi Hi8 Pro or Cube iWorks 10 System.
But my efforts have been stopped as i was stupid enough to flash the newest FW that DISABLES booting Android.
Can someone answer here who has NOT flashed the new Firmware.
I need someone with this version:
BIOS: American Megatrends / Aptio, Core Version 5.011, Project BW3_VT4_C.10E
OR very similar. NOT the 109 version / BT4 found on the Trekstor page !
If you got it i have the tool to back it up to a file and THEN i guess we can make Android work.
Ender
Edit: got the file but something is wrong, have a Brick now

Categories

Resources