Related
Hello,
i know there are some threads that has have the same problem but i am german and its very hard to understand....
So my problem is:
I got a Sony Ericsson Xperia Ray AV 2.3.4
Today i installed the bootloader with fastboot and i follow this tutorial
Sony_Ericsson_Xperia_Ray:_Full_Update_Guide (on cyanogenmod)
its a CM7 Sony Ericsson Ray Tutorial //i can´t post the link here....?!
I used the newest stable mod (update-cm-7.1.0.2-XperiaRay-ST18i-signed.zip).
but after the last step, i reboot my phone and the only that i got is the CM7 loadscreen...
So thats why i try Wipe Dalvik Cache, wipe cache and factory...
Than i reboot again with the same result. Only the CM7 loadscreen.
Than i want to try flash an other ROM but there is no longer a Bootloader on my Phone...? Why?
Fastboot is possible but no data transfer and no debugmode or anything else.
Please use search and questions thread
Restore with seus
Chrizzel said:
Hello,
i know there are some threads that has have the same problem but i am german and its very hard to understand....
So my problem is:
I got a Sony Ericsson Xperia Ray AV 2.3.4
Today i installed the bootloader with fastboot and i follow this tutorial
Sony_Ericsson_Xperia_Ray:_Full_Update_Guide (on cyanogenmod)
its a CM7 Sony Ericsson Ray Tutorial //i can´t post the link here....?!
I used the newest stable mod (update-cm-7.1.0.2-XperiaRay-ST18i-signed.zip).
but after the last step, i reboot my phone and the only that i got is the CM7 loadscreen...
So thats why i try Wipe Dalvik Cache, wipe cache and factory...
Than i reboot again with the same result. Only the CM7 loadscreen.
Than i want to try flash an other ROM but there is no longer a Bootloader on my Phone...? Why?
Fastboot is possible but no data transfer and no debugmode or anything else.
Click to expand...
Click to collapse
it is because you installed official CM7 for ray , as i know it is 7.1.0.1
This Cyanogenmod have boot loop issue , so dont worry download old version of cyanogenmod and install it as you installed OLD
SEUS?! I looking for SEUS but it can´t find my phone. I installed the software an connect my phone with usb, but i can only connect with the fastboot mode i mean the mode:
Press the VOL Up Button while connecting USB than the LED in my phone glowes blue.
If u know any answer don´t say look here or there i read over 100 posts today i am totally finished i begin to punish my self ...-.-
i need help
Chrizzel said:
SEUS?! I looking for SEUS but it can´t find my phone. I installed the software an connect my phone with usb, but i can only connect with the fastboot mode i mean the mode:
Press the VOL Up Button while connecting USB than the LED in my phone glowes blue.
If u know any answer don´t say look here or there i read over 100 posts today i am totally finished i begin to punish my self ...-.-
i need help
Click to expand...
Click to collapse
YOU need to use the right thread
Download the ftf file for .42 firmware HERE and use flashtool to flash it, plug your phone in with usb to pc while holding down on volume the light should go green and then you can flash the ftf in flash mode
if that fails you need to make sure you have a cm kernel flashed using flashtool
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
Chrizzel said:
SEUS?! I looking for SEUS but it can´t find my phone. I installed the software an connect my phone with usb, but i can only connect with the fastboot mode i mean the mode:
Press the VOL Up Button while connecting USB than the LED in my phone glowes blue.
If u know any answer don´t say look here or there i read over 100 posts today i am totally finished i begin to punish my self ...-.-
i need help
Click to expand...
Click to collapse
If you dont want to look here or there or even try to search for it yourself then why should anyone help you ??
xperia ray said:
it is because you installed official CM7 for ray , as i know it is 7.1.0.1
This Cyanogenmod have boot loop issue , so dont worry download old version of cyanogenmod and install it as you installed OLD
Click to expand...
Click to collapse
Ah thank you =) but how??
Please help me... i don´t know how cause i don´t longer have a bootloader
how i can flash only with fastboot?!
Edit:
Download the ftf file for .42 firmware HERE and use flashtool to flash it, plug your phone in with usb to pc while holding down on volume the light should go green and then you can flash the ftf in flash mode
if that fails you need to make sure you have a cm kernel flashed using flashtool
-------------------------------------------------------------------------
thank you =) i would test it. Don´t worry i am a very nervous German Guy =)
Chrizzel said:
Ah thank you =) but how??
Please help me... i don´t know how cause i don´t longer have a bootloader
how i can flash only with fastboot?!
Edit:
Download the ftf file for .42 firmware HERE and use flashtool to flash it, plug your phone in with usb to pc while holding down on volume the light should go green and then you can flash the ftf in flash mode
if that fails you need to make sure you have a cm kernel flashed using flashtool
-------------------------------------------------------------------------
thank you =) i would test it. Don´t worry i am a very nervous German Guy =)
Click to expand...
Click to collapse
The answers to all your problems are there, all you need to do is look and search. There is no need to panic it can fixed, but first look to fix it yourself and make sure you no what you are doing and how to put it back if it doesnt work, should always read the whole thread of what rom or kernel you are flashing to make sure you understand in first
Hello!
I have an issue with my Neo V. I want to change kernel, but the phone won`t go into fastboot mode (phone off, press and hold menu, plug USB). Strange thing is, that it worked before (I`ve done this procedure several times). What actually happens after plugging the phone into the computer is not continous bue led light, but one short blip of blue and then orange (charging). I tried X-parts, doesn`t work either. I can ge to CWM without any issues, but fastboot? Nope kid, not this time.
My gear:
Phone: Xperia Neo V, CM10, kernel Fusion 2.6.32.60
PC: Lenovo Z500 Win8 64bit
PS. Yes, I changed kernel on this PC before, no problems at all. I read in other thread that you can`t enter fastboot mode if your phone is carrier locked- well, frankly, I don`t know if my device is locked or not, but, if it is, than why was I able to enter fastboot before? Thank God it`s actually really difficult to brick android, otherwise I`d have my phone broken a long ago I guess
Oh, and BTW- My first post, so hello forums!
Hey There
Kay350 said:
Hello!
I have an issue with my Neo V. I want to change kernel, but the phone won`t go into fastboot mode (phone off, press and hold menu, plug USB). Strange thing is, that it worked before (I`ve done this procedure several times). What actually happens after plugging the phone into the computer is not continous bue led light, but one short blip of blue and then orange (charging). I tried X-parts, doesn`t work either. I can ge to CWM without any issues, but fastboot? Nope kid, not this time.
My gear:
Phone: Xperia Neo V, CM10, kernel Fusion 2.6.32.60
PC: Lenovo Z500 Win8 64bit
PS. Yes, I changed kernel on this PC before, no problems at all. I read in other thread that you can`t enter fastboot mode if your phone is carrier locked- well, frankly, I don`t know if my device is locked or not, but, if it is, than why was I able to enter fastboot before? Thank God it`s actually really difficult to brick android, otherwise I`d have my phone broken a long ago I guess
Oh, and BTW- My first post, so hello forums!
Click to expand...
Click to collapse
U must be having flashtool. If u don't,, GET IT!
in flashtool . U will see a big Lightning icon on the top left. click it.
a window will appear saying'mode selector'.
in ur case . select fastboot mode and click 'ok'
Try 2 options-
1.'Reboot into fastboot mode (via ADB)'
2.'Reboot into fastboot mde (via fastboot)'
then click 'Select Kernel to flash'
select the kernel file(the filename will end with a '.IMG' extension)
then continue...
please hit 'thanks' if i helped!
Made it work by myself. Appareantly, the usb cable was the problem, however, I am not so sure, if I didn`t try the process with this one (working) before. Anyway, a huge relief.
Thanks for the tip with flashtool, I knew abut this program (and used it a couple of times), but in my situation it wouldn`t change anythng (same story as my idea with rebooting to fastboot mode via X-parts).
srik9999 said:
U must be having flashtool. If u don't,, GET IT!
in flashtool . U will see a big Lightning icon on the top left. click it.
a window will appear saying'mode selector'.
in ur case . select fastboot mode and click 'ok'
Try 2 options-
1.'Reboot into fastboot mode (via ADB)'
2.'Reboot into fastboot mde (via fastboot)'
then click 'Select Kernel to flash'
select the kernel file(the filename will end with a '.IMG' extension)
then continue...
please hit 'thanks' if i helped!
Click to expand...
Click to collapse
You don't need whole flashtool. You just need adb and fastboot, eventualy drivers if running win.
Then just do in fastboot mode
$ fastboot flash boot boot.img
Or whatever the file name is.
Yes, I have sometimes that problem too. So, I am planning to get a new usb cable.
Gesendet von meinem MT11i mit Tapatalk 2
all of you stop spamming the forum
there's already a thread for rooting/bootloader unlocking and kernel flashing
post your problems there
try to keep the forum clean
Now I know this problem too ;/ I flash kernel 100000 time before. I have Lupus v6 and MIUIv5 by ZduneX25 and any idea what is problem. I try on other computer, other system,other cable so ? tell me it is not my socket ? and sorry for my poor english
I too am facing the same problem!
I'm currently using CyanogenMod 10 with the same Kernel which was pre-installed on the Neo V when I bought it.
I wish to change the Kernel to Lupus as it is compatible with most of the ROMs. I tried flashing the kernel with Flashtools and Kernel Flasher but to no avail.
Kindly help!
akhilll09 said:
I too am facing the same problem!
I'm currently using CyanogenMod 10 with the same Kernel which was pre-installed on the Neo V when I bought it.
I wish to change the Kernel to Lupus as it is compatible with most of the ROMs. I tried flashing the kernel with Flashtools and Kernel Flasher but to no avail.
Kindly help!
Click to expand...
Click to collapse
Did you unlock the bootloader
Sent from my Xperia Neo V using Tapatalk 4 Beta
avinashrocks1990 said:
Did you unlock the bootloader
Click to expand...
Click to collapse
I never expected this question from you...:-/
deccen90 said:
I never expected this question from you...:-/
Click to expand...
Click to collapse
I know but the text in post is very confusing which forced me to ask this stupid question
Sent from my Xperia Neo V using Tapatalk 4 Beta
Well let me clear the air out of that topic. Yes I have unlocked the bootloader. I've even installed CyanogenMod.
When ever I use any kernel installing software like Flashtool or Kernel Installer, the computer fails to detect my phone under Fastboot mode!
When I use Flashtool to slip into Fastboot mode using ADB, the phone simply reboots, where as when I use Kernal Installer where I manually need to put the phone is Fastboot mode, the blue light turns ON as it is supposed to be.
To avoid further doubts, tell me tell you that I have updated my ADB drivers and also Flashtool drivers!
akhilll09 said:
Well let me clear the air out of that topic. Yes I have unlocked the bootloader. I've even installed CyanogenMod.
When ever I use any kernel installing software like Flashtool or Kernel Installer, the computer fails to detect my phone under Fastboot mode!
When I use Flashtool to slip into Fastboot mode using ADB, the phone simply reboots, where as when I use Kernal Installer where I manually need to put the phone is Fastboot mode, the blue light turns ON as it is supposed to be.
To avoid further doubts, tell me tell you that I have updated my ADB drivers and also Flashtool drivers!
Click to expand...
Click to collapse
Well is manually doing so hard?it works so I don't see any problem
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
Well is manually doing so hard?it works so I don't see any problem
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
You are not getting my point. I don't have problem in doing it manually. it's just that it is not working in eitherways!
akhilll09 said:
You are not getting my point. I don't have problem in doing it manually. it's just that it is not working in eitherways!
Click to expand...
Click to collapse
When you connect manually the led stays at blue but the pc doesn't recognise it?
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
When you connect manually the led stays at blue but the pc doesn't recognise it?
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Yes.
akhilll09 said:
Yes.
Click to expand...
Click to collapse
Uninstall the drivers and reinstall it may be it can solve your problems
Sent from my Xperia Neo V using Tapatalk 4 Beta
avinashrocks1990 said:
Uninstall the drivers and reinstall it may be it can solve your problems
Sent from my Xperia Neo V using Tapatalk 4 Beta
Click to expand...
Click to collapse
Already done that!
akhilll09 said:
Already done that!
Click to expand...
Click to collapse
What happens when you connect it? Anything comes up on the pc? Device not recognized etc etc?
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
What happens when you connect it? Anything comes up on the pc? Device not recognized etc etc?
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
No, nothing of that sort.
I connect it, my PC detects my phone (I'm an engineer, I know that it is detected, so no queries there please).
The problem is only I try to Fastboot mode.
Phone restarts when trying to put into Fastboot mode using Flashtool, and "waiting for device" is the message displayed when trying it with Kernel Installer.
akhilll09 said:
No, nothing of that sort.
I connect it, my PC detects my phone (I'm an engineer, I know that it is detected, so no queries there please).
The problem is only I try to Fastboot mode.
Phone restarts when trying to put into Fastboot mode using Flashtool, and "waiting for device" is the message displayed when trying it with Kernel Installer.
Click to expand...
Click to collapse
Are you sure you are doing it right?i still don't get what's happening... Aren't you switching the phone off then when holding menu button connecting the usb cable?or some other steps...
Sent from my Xperia Neo V using xda app-developers app
Hi guys,
I'm not an Android expert, but AFAIK is a Linux system.
I'm quite familiar with Unix/Linux world and wondering if there's a way to see the messages during boot just like on a console?
I'm asking, beacause my ray hangs at sony-ericsson logo, and can't figure out what's wrong with it.
Thank you!
to solve problem .. flash your stock .ftf again with flashtool
Well u can use adb for that...use adb logcat...search in xda if u don't know how to use adb...it will give u a complete log as u need
Cheers,
AJ
Mohamed Hashem said:
to solve problem .. flash your stock .ftf again with flashtool
Click to expand...
Click to collapse
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
nroberto13 said:
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
Click to expand...
Click to collapse
i think usb debug will not work anyway if ur phone powered off
try to flash custom kernel again , then u will have CWM , then remove your SD Card and put it in reader , then put any ROM in it , then put it again in ur phone , then flash it with CWM , i made that before with CM ROM & it worked :good:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
nroberto13 said:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
Click to expand...
Click to collapse
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
mihahn said:
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
I flashed a custom rom.
Actually, i was on ICS, and wanted to try custom GB illuminative.
Flashed the v10, everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash some times the rom without issues, but the last was unlucky .
By that time, my BL was locked, so I had to root my phone to install cwm.
Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the process over and flashed GB .42, rooted with doomlord, script, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
basically these were the steps I was doing, and after a cwm flash of the custom rom, the phone ended hanging at sony logo.
I then tried different kind of stock firmwars ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flash a version of the illuminative custom rom which was working before, but still the sam. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same.
now, cwm is gone, as stock kernel overwrote the custom one.
That's the story .
As i remember i can enable usb debug even phone not boot to system. By charging phone with pc(not standard charger) then hold power button and at windows(or else) will ask for driver
Ps. I did that with X8, didn't know with 2011's phone.
Sent from my ST27i using xda app-developers app
Hmm okay you could try to flash the unbricking ftf (you can find it in someguyfromhell's sticked thread) and afterwards stock gingerbread or ics again, but I don't know if that could work or maybe make it even worse (normally it's to unbrick if you did an ota update on unlocked bootloader, but let's see). Maybe it's worth a try
The problem about cwm that's gone: if you are still able to boot into fastboot mode, you can flash another kernel and for example try to install cyanogenmod or any other rom. Just try cm10 or cm10.1. Maybe in the end a rom will boot
Sent from my SK17i running stock ics (.587)
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
nroberto13 said:
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Click to expand...
Click to collapse
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
eswawan said:
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
yes, it goes to offline charging mode!
mihahn said:
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
nroberto13 said:
yes, it goes to offline charging mode!
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
Click to expand...
Click to collapse
With the procedure I posted above it shouldn't simply boot to offline charging mode, so maybe it is a driver problem. Try it step by step like posted above, maybe it could work. If not it was worth a try
Sent from my SK17i running stock ics (.587)
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
PS. not sure if it's right, but when I connect the phone to pc, connects in flash mode, even if I don't hold vol down, the notification led is solid green, then the led turns off, Sony Ericsson appears, then the battery with the power sign and finally notification led turns orange. when I short press power button now, the battery with power sign shows up on screen.
nroberto13 said:
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
Click to expand...
Click to collapse
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
mihahn said:
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Sorry, I think I wasn't clear enough. I thought I should be connecting the phone without holding any of the volume buttons, just to try if it's charging in offline mode. Here's the exact status.
1. If I do not hold any volume buttons, the phone goes into flash mode ( solid green led ), and after a short while ( 20-30 sec ) led turns off, Sony Ericsson logo shows up, then goes away and battery with power sign is displayed when I short press the power button
2. if I hold vol down, phone behaves the same way as at 1.
3. if I hold vol up, phone goes in fastboot mode ( solid blue led ) and stay solid blue, it is not going into charging mode.
Abhinav2 said:
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
Click to expand...
Click to collapse
I may not be clear enough here either. I didn't use sus after unlocking BL, I know it bricks he phone, anyway, I did flash the unbrick ftf mentioned by mihahn. here are the steps I did so far :
1. I was on ICS ( Iced Bean 3.4 ) , with BL lockedand phone rooted and wanted to try custom GB illuminative.
2. I flashed the rom with cwm, and everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash the rom several times, without issues, but the last was unlucky .
3. Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the rooting process over and flashed GB .42, rooted with flashtool, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
4. and after a cwm flash of the custom rom, the phone ended hanging at sony ericsson logo.
5. I then tried different kind of stock firmwares ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
6. afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flashed a version of the above mentioned GB illuminative custom rom which was working before, but still the same.
7. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same, now, cwm is gone, as stock kernel overwrote the custom one.
8. tried to flash someguyfromhell's unbrick ftf, which is for the FOTA brick whith BL unlocked, as I understood.
9. reflashed stock GB .42 with flashtool, but phone still hangs at sony Ericsson logo.
In this status, could I connect to the phone using adb, so I could do a adb logcat ?
If so, please advise how.
Thanks.
@nroberto13 Do you mind telling us which ftfs u flashed?
Cheers,
AJ
Hi...
I wanted to flash a kernel, so I entered into fastboot mode with the "up" volume holded, and then, the blue LED appeared, but then, it just dissappeared! So Flashtool didn't flash anything.
Again, and again, one time and other, and again.
I get bored and decided to flash the ROM I had in CWM, so I flashed it from CWM and now, I cannot turn on my phone cause it makes bootlogo.
Flashtool still does the same thing with my device when I'm trying to flash any Stock Rom or Kernel.
Please, I need the phone for daily usage and for tomorrow.
What can I do? I can enter to CWM but I don't know more things to do to solve this problem...
Help, please.
Try flash the kernel via cmd.
Sent from my Xperia Sola using xda app-developers app
Cwikla said:
Try flash the kernel via cmd.
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
Thanks for replying!
How do I do it?
Please!
Thaanks!
Ultracity said:
Thanks for replying!
How do I do it?
Please!
Thaanks!
Click to expand...
Click to collapse
The problem is that I connect the phone to the PC through a USB, okay, while I connect with the USB, the blue LED turns on for a few seconds, but then it turns off, so I can't flash any kernel even if I'm using flashtool or cmd.
Please... help.
When I select "Mount usb storage" in CWM, my PC doesn't recognize anything!
I could restore a backup that I have but,...
Try removing the battery on your phone and pressing power a few times, then open stock rom in Flashtool and when it says to press the back button, insert battery-hold volume down-insert cable as fast as possible...
Thanks, really...
But nothing changes...
I've installed ADB, SDK and PC Companion but my PC still doesn't recognize the phone, so I can't add my backup to CWM through "mount USB Storage"...
Help please!
Exactly, install stock ROM through an .ftf and flashtool... afterwards you can copy your backup on the phone and install a kernel with recovery
Ryccardo said:
Exactly, install stock ROM through an .ftf and flashtool... afterwards you can copy your backup on the phone and install a kernel with recovery
Click to expand...
Click to collapse
But if PC doesn't recognize my phone, flashtool also doesn't do it!, so I can't flash anything, the green LED turns on but in a few seconds it turns off and doesn't flash anything, just turns on the phone that makes bootlogo :/
THANKS FOR YOUR HELP.
I really apreciate
Is your boot loader locked or unlcoked?
Have you ever flashed with flashtool before?
Did you install the drivers with the installer in flashtool drivers directory(the one for your phone + falsh and fastboot mode drivers)?
Finally yesterday after three hours I could flash a stock ROM, don't know how changed but I could do it.
FINE
Thanks all!
Enviado desde mi ST25i mediante Tapatalk
Ultracity said:
Thanks, really...
But nothing changes...
I've installed ADB, SDK and PC Companion but my PC still doesn't recognize the phone, so I can't add my backup to CWM through "mount USB Storage"...
Help please!
Click to expand...
Click to collapse
Dude!Drivers install yet?try to change usb cable,ive met that prob one but change usb really help.by the way what windows are u using?
Sent from my ST25i using xda app-developers app
Hello everyone,,i tried searching alot of old threads and non working links,,,my phone cannot turn on just red light blinking here and there.
I have downloaded flashtool from Sony website it is not being recognize on my windows 10 ,,anyone with any updated ideas? Since the phone is old? Really like to still use this phone!
P.s. there's no such thing as Sony logo for now and last i did to this phone was flashed the GPE rom.
Very sad right now please help!
kingrichards said:
Hello everyone,,i tried searching alot of old threads and non working links,,,my phone cannot turn on just red light blinking here and there.
I have downloaded flashtool from Sony website it is not being recognize on my windows 10 ,,anyone with any updated ideas? Since the phone is old? Really like to still use this phone!
P.s. there's no such thing as Sony logo for now and last i did to this phone was flashed the GPE rom.
Very sad right now please help!
Click to expand...
Click to collapse
Have you disabled the driver signature enforcement and then try installing drivers again. And then try to connect your device to Androxyede flashtool in flash mode
How do I do that? Please point me in the right direction?
If you boatloader is locked you can use Sony Companion software to repair your phone. Open the software and go to update. Once the device is not detected a window will pop up asking you to repair the device. Click on that and follow the instructions. All data will be deleted.
kingrichards said:
How do I do that? Please point me in the right direction?
Click to expand...
Click to collapse
Download androxydes flashtool the package should have a application which installs drivers click on that app and install flashmode and fastboot drivers then turn off your phone and while pressing down volume down connect the device to PC you should have a green light blinking then select the stock firmware in Flashtool and flash it
sairaj rane said:
Download androxydes flashtool the package should have a application which installs drivers click on that app and install flashmode and fastboot drivers then turn off your phone and while pressing down volume down connect the device to PC you should have a green light blinking then select the stock firmware in Flashtool and flash it
Click to expand...
Click to collapse
Do you have the link to the flash tool?
kingrichards said:
Do you have the link to the flash tool?
Click to expand...
Click to collapse
http://www.flashtool.net/downloads_windows.php