Related
Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
Hi to all! I've a very big problem! My x10 show me only Sony Ericsson.
Idid try to flash but nothing...pc don't recognize my phone...i tried with sues, pcc and flashtool...what can i try to solve it? please help me!!!!
ps: if i plug-in x10 without battery to pc, it show me the green led...and after hold back and put battery, it show me green led for 5-10 seconds and after the green led turn off and show me sony ericsson
What did you do to your X10 that made it do this? What did you try flashing via Flashtool that didn't work?
i was on miui e all gone well....after i tried to install the black edition HD...after that i had this problem...
if i try to connect in to flash mode x10 to pc, it don't work...the pc don't recognize my x10
Did you format your data after changing ROM?
Sent from my X10i using XDA App
yes i did it...
Maybe You have wrong kernel?
Shindoruk said:
yes i did it...
Click to expand...
Click to collapse
i don't know...but i don't think...but the problem is another...why can't i plug-in and flash it? why didn't pc recognize my x10?
HElp Help Help!!!!
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Panzerfaust101 said:
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Click to expand...
Click to collapse
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
As in, it doesn't recognise the device?
I think there's another way where you take the battery out and plug the phone into the computer. The green LED should light up for about 5-10 seconds (when it's in flash mode) where you have a window to select the firmware and flash. I haven't personally tried it, but I'm asking someone who has done it about how it's done. You might want to try that method as you can't really do much else with your phone right now. I'll update this post once I know the exact method and details
panzerfaust101 said:
i'll update this post once i know the exact method and details
Click to expand...
Click to collapse
thanks a lot
anything news? please i need help!!!!!!
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
pissat4motion said:
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
it doesn't work
try this man, http://forum.xda-developers.com/showthread.php?t=1504809
hope it helps
Help
Shindoruk said:
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
Click to expand...
Click to collapse
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
epep420 said:
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
Click to expand...
Click to collapse
If your bootloader is locked, you can choose the option to repair phone in pc comp. Another possibility why your phone is not detected might be because of drivers.
It may also because of his usb not working , the problem might have started . I want to check out whether your phone is charging and i also want to know that in devicemanager your phone when connected in flash mode shows as "semc usb device "
Thanks
Can U Access XRecovery Menu ?
Can U Access XRecovery Menu ?
- Connect Usb Cable -
- Mount System (in XRecovery) -
- Open Sony Pc Companion -
- Select Repair -
- it says connect your mobile in flash mode -
- u dont remove the cable -
- unmobut System (In XRecovery)
- remove usb cable -
connect in flash mode - IT REPAIRS YOUR MOBILE .
Try This Once..Worked For Me
Hi, first of all, sorry about my english. I think it's terrible.
I have a SE WT19 stuck on FXP bootloop.
I had installed a custom kernel, but i guess i did something wrong.
At first, my cellphone is on bootloop (in some custom ROMs) or just on black screen.
So, i tried to flash a new kernel with flashtool, or a stock Rom with PCCompanion, but my device is not recognized by Windows 7.
Also is not recognized by Linux, or Mac.
The kernel that bricked my LWW was wt19i-live-rage2.7-kernel-for-fxp-cm7.
There is something possible to bring it alive again?
Ever uninstall and install all drivers and tried in another pc, aways shows the same message.
"One of the USB devices attached to this computer is not working properly, and Windows does not recognize it. For assistance in solving this problem, click this message." :crying: :crying:
rsmaster said:
Hi, first of all, sorry about my english. I think it's terrible.
I have a SE WT19 stuck on FXP bootloop.
I had installed a custom kernel, but i guess i did something wrong.
At first, my cellphone is on bootloop (in some custom ROMs) or just on black screen.
So, i tried to flash a new kernel with flashtool, or a stock Rom with PCCompanion, but my device is not recognized by Windows 7.
Also is not recognized by Linux, or Mac.
The kernel that bricked my LWW was wt19i-live-rage2.7-kernel-for-fxp-cm7.
There is something possible to bring it alive again?
Ever uninstall and install all drivers and tried in another pc, aways shows the same message.
"One of the USB devices attached to this computer is not working properly, and Windows does not recognize it. For assistance in solving this problem, click this message." :crying: :crying:
Click to expand...
Click to collapse
First of all its not bricked..there are several information missing.Is your phone rooted & boot loader unlocked?With which rom did u try FXP kernel?Chech if u have the latest flashtool installed. Then go to driver folder & download the latest drivers. Connect ur phone in fastboot mode it should install the necessary drivers
saqib nazm said:
First of all its not bricked..there are several information missing.Is your phone rooted & boot loader unlocked?With which rom did u try FXP kernel?Chech if u have the latest flashtool installed. Then go to driver folder & download the latest drivers. Connect ur phone in fastboot mode it should install the necessary drivers
Click to expand...
Click to collapse
My phone was rooted and unlooked bootloader. I tried ALL CM7/9/10 roms posted in the xda development forum. I have the latest flashtool installed, also the latest drivers. When I connect my phone in fastboot or in flash mode, nothing happens,, cause my pc (and flashtool) do not recognize the device.
Okay but what happens when u connect ur phone to pc while pressing vol up button(without running flashtool)?does the blue led show & pc doesn't recognize it?if yes then go to device manager on my computer & see whats the problem with ur device,try installing it from there.Another question,can u get into CWM?
saqib nazm said:
Okay but what happens when u connect ur phone to pc while pressing vol up button(without running flashtool)?does the blue led show & pc doesn't recognize it?if yes then go to device manager on my computer & see whats the problem with ur device,try installing it from there.Another question,can u get into CWM?
Click to expand...
Click to collapse
When I press Up, turns on the blue led.
When I press Down, turns on the green led.
Device Manager displays: Unknow Device, and say I'm using the latest drivers, and something about Code 43 wrong.
I can get into CWM.
Nice then ur phone is perfectly okay :good:
just try another pc
or
unistall all related to ur device(flashtool,drivers,android sdk,pc companion,google usb) & reinstall.If that even don't work I suggest u to do a fresh install of windows.
See if it's a problem with the USB port. Are other devices connected to that port recognized? Some of the USB ports in the old PC at my home keep showing that message whatever I connect to it
saqib nazm said:
Nice then ur phone is perfectly okay :good:
just try another pc
or
unistall all related to ur device(flashtool,drivers,android sdk,pc companion,google usb) & reinstall.If that even don't work I suggest u to do a fresh install of windows.
Click to expand...
Click to collapse
Thnks..
I'll try it :fingers-crossed:
havocgb said:
See if it's a problem with the USB port. Are other devices connected to that port recognized? Some of the USB ports in the old PC at my home keep showing that message whatever I connect to it
Click to expand...
Click to collapse
The other device connected works fine...
Might be the phone's micro USB port is faulty???
Sent from my Xperia Mini using xda app-developers app
rsmaster said:
When I press Up, turns on the blue led.
When I press Down, turns on the green led.
Device Manager displays: Unknow Device, and say I'm using the latest drivers, and something about Code 43 wrong.
I can get into CWM.
Click to expand...
Click to collapse
The phone doesn't seem to be bricked. Try using Flashtool on another computer. Make sure you do have those fastboot drivers(when you first connect your phone to Flashtool in fastboot mode, Flashtool gives you a notification that drivers need to be installed for the device. I confirm that the ones provided in C:\Flashtool\drivers work for LWW )
(Always make sure the kernel is compatible with the ROM you're trying to flash)
Start with the stock kernel(the one provided inside the CM7/CM9 zip - boot.img). Then flash the relevant ROM and see what happens. Once that works fine, start tinkering with various kernels out there.
Don't worry, it's just a soft brick
I haven't bricked my WT19 yet but I did soft brick my former X8 and Someone else's Galaxy something...
What I can advise you do is flash the whole stock .ftf ROM from Sony, just search for the 4.1.B.0.587 firmware, flash it and start from scratch.
About your pc not recognizing your phone: how then did you flash the kernel?? Do have the Sony PC Companion installed on your machine? I have it just for the driveers, I know Flashtool comes with them but I rather have the offiicial somethimes... I think MediaGo also comes with them.
Anyhow, I hope you can get your phone working. Let us know how it went
gouthamthemostwanted said:
Might be the phone's micro USB port is faulty???
Sent from my Xperia Mini using xda app-developers app
Click to expand...
Click to collapse
Micro USB port works fine too.
Hi guys,
All tests done.
Other pc, or OS, do not recognize my device.
Tried another notebook, tried another windows version, another Linux and MacOS, nothing works!!
So, this process of kernel change could cause some hardware damage?
I really can't change the kernel in cwm recovery?
Just to recall, I can change the battery, got the phone in fasboot/flash mode, got CWM working, install new ROM but, or finish with bootloop or with black screen.
fragas16 said:
I haven't bricked my WT19 yet but I did soft brick my former X8 and Someone else's Galaxy something...
What I can advise you do is flash the whole stock .ftf ROM from Sony, just search for the 4.1.B.0.587 firmware, flash it and start from scratch.
About your pc not recognizing your phone: how then did you flash the kernel?? Do have the Sony PC Companion installed on your machine? I have it just for the driveers, I know Flashtool comes with them but I rather have the offiicial somethimes... I think MediaGo also comes with them.
Anyhow, I hope you can get your phone working. Let us know how it went
Click to expand...
Click to collapse
-About your pc not recognizing your phone: how then did you flash the kernel??
-My pc recognized until the latest kernel. After the new kernel, my problems begun.
I have PC Companion installed in my machine. Don't recognizes too.
One more time, sorry about the english mistakes.
I just speak portuguese^^
But I'm trying some comunication!!!
Format your Computer
Then to go http://forum.xda-developers.com/showthread.php?t=1799786 .... Next go to download PC SUS service update last version.... then install ... install too PC companic.... Next Installl flashtools next install Drivers on the folder Drivers Flashtoools.....
Next go to SUS service UPDATE and select your model device. then click Next.... |THENn Conect your device on modo flash modo...... Thennnnnn not go next step... Go oper Flastools and try flash file .tft Stock ROM.
I Have A SE LWW and i do the downgrafe to GB and then i root it...after that i go to PC Companion And I Do The Update That It Said...After That...I Lose My Root...I Have GB And Now Doesn't Appear The ICS Update....Can Anyone Help Me With This??? :crying::crying::crying::crying:
Johnyx1 said:
I Have A SE LWW and i do the downgrafe to GB and then i root it...after that i go to PC Companion And I Do The Update That It Said...After That...I Lose My Root...I Have GB And Now Doesn't Appear The ICS Update....Can Anyone Help Me With This??? :crying::crying::crying::crying:
Click to expand...
Click to collapse
just flash stock ftf of ICS 4.1.B.0.587 then get rooted. There are quite a lots of guide & links where you can get help from. In general & Q& A Threads
Are you connecting it to a USB 3.0?
Sent from my ST18i using xda app-developers app
IronBlossom said:
Are you connecting it to a USB 3.0?
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
no...
---------- Post added at 09:58 PM ---------- Previous post was at 09:42 PM ----------
saqib nazm said:
just flash stock ftf of ICS 4.1.B.0.587 then get rooted. There are quite a lots of guide & links where you can get help from. In general & Q& A Threads
Click to expand...
Click to collapse
can u help me with links?
Hi guys,
I'm not an Android expert, but AFAIK is a Linux system.
I'm quite familiar with Unix/Linux world and wondering if there's a way to see the messages during boot just like on a console?
I'm asking, beacause my ray hangs at sony-ericsson logo, and can't figure out what's wrong with it.
Thank you!
to solve problem .. flash your stock .ftf again with flashtool
Well u can use adb for that...use adb logcat...search in xda if u don't know how to use adb...it will give u a complete log as u need
Cheers,
AJ
Mohamed Hashem said:
to solve problem .. flash your stock .ftf again with flashtool
Click to expand...
Click to collapse
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
nroberto13 said:
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
Click to expand...
Click to collapse
i think usb debug will not work anyway if ur phone powered off
try to flash custom kernel again , then u will have CWM , then remove your SD Card and put it in reader , then put any ROM in it , then put it again in ur phone , then flash it with CWM , i made that before with CM ROM & it worked :good:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
nroberto13 said:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
Click to expand...
Click to collapse
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
mihahn said:
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
I flashed a custom rom.
Actually, i was on ICS, and wanted to try custom GB illuminative.
Flashed the v10, everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash some times the rom without issues, but the last was unlucky .
By that time, my BL was locked, so I had to root my phone to install cwm.
Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the process over and flashed GB .42, rooted with doomlord, script, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
basically these were the steps I was doing, and after a cwm flash of the custom rom, the phone ended hanging at sony logo.
I then tried different kind of stock firmwars ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flash a version of the illuminative custom rom which was working before, but still the sam. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same.
now, cwm is gone, as stock kernel overwrote the custom one.
That's the story .
As i remember i can enable usb debug even phone not boot to system. By charging phone with pc(not standard charger) then hold power button and at windows(or else) will ask for driver
Ps. I did that with X8, didn't know with 2011's phone.
Sent from my ST27i using xda app-developers app
Hmm okay you could try to flash the unbricking ftf (you can find it in someguyfromhell's sticked thread) and afterwards stock gingerbread or ics again, but I don't know if that could work or maybe make it even worse (normally it's to unbrick if you did an ota update on unlocked bootloader, but let's see). Maybe it's worth a try
The problem about cwm that's gone: if you are still able to boot into fastboot mode, you can flash another kernel and for example try to install cyanogenmod or any other rom. Just try cm10 or cm10.1. Maybe in the end a rom will boot
Sent from my SK17i running stock ics (.587)
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
nroberto13 said:
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Click to expand...
Click to collapse
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
eswawan said:
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
yes, it goes to offline charging mode!
mihahn said:
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
nroberto13 said:
yes, it goes to offline charging mode!
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
Click to expand...
Click to collapse
With the procedure I posted above it shouldn't simply boot to offline charging mode, so maybe it is a driver problem. Try it step by step like posted above, maybe it could work. If not it was worth a try
Sent from my SK17i running stock ics (.587)
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
PS. not sure if it's right, but when I connect the phone to pc, connects in flash mode, even if I don't hold vol down, the notification led is solid green, then the led turns off, Sony Ericsson appears, then the battery with the power sign and finally notification led turns orange. when I short press power button now, the battery with power sign shows up on screen.
nroberto13 said:
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
Click to expand...
Click to collapse
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
mihahn said:
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Sorry, I think I wasn't clear enough. I thought I should be connecting the phone without holding any of the volume buttons, just to try if it's charging in offline mode. Here's the exact status.
1. If I do not hold any volume buttons, the phone goes into flash mode ( solid green led ), and after a short while ( 20-30 sec ) led turns off, Sony Ericsson logo shows up, then goes away and battery with power sign is displayed when I short press the power button
2. if I hold vol down, phone behaves the same way as at 1.
3. if I hold vol up, phone goes in fastboot mode ( solid blue led ) and stay solid blue, it is not going into charging mode.
Abhinav2 said:
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
Click to expand...
Click to collapse
I may not be clear enough here either. I didn't use sus after unlocking BL, I know it bricks he phone, anyway, I did flash the unbrick ftf mentioned by mihahn. here are the steps I did so far :
1. I was on ICS ( Iced Bean 3.4 ) , with BL lockedand phone rooted and wanted to try custom GB illuminative.
2. I flashed the rom with cwm, and everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash the rom several times, without issues, but the last was unlucky .
3. Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the rooting process over and flashed GB .42, rooted with flashtool, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
4. and after a cwm flash of the custom rom, the phone ended hanging at sony ericsson logo.
5. I then tried different kind of stock firmwares ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
6. afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flashed a version of the above mentioned GB illuminative custom rom which was working before, but still the same.
7. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same, now, cwm is gone, as stock kernel overwrote the custom one.
8. tried to flash someguyfromhell's unbrick ftf, which is for the FOTA brick whith BL unlocked, as I understood.
9. reflashed stock GB .42 with flashtool, but phone still hangs at sony Ericsson logo.
In this status, could I connect to the phone using adb, so I could do a adb logcat ?
If so, please advise how.
Thanks.
@nroberto13 Do you mind telling us which ftfs u flashed?
Cheers,
AJ
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
BTW my battery was 25%
Bump
Help
Sal7_one said:
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
Click to expand...
Click to collapse
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Thank you si much for replaying I will send it I'm an idiot for not seeing unlocked bootloader
I will fix USB and again thanks bro
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Bro I fixed the usb please it's flashing red what do I do
Sal7_one said:
Bro I fixed the usb please it's flashing red what do I do
Click to expand...
Click to collapse
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
You're really awesome iknow how to use flash tool but it's says drivers are not installed and they are and what should I choice from the wipe menu
I solved the problem with the drivers when I try to flash ftf it's says preparing then it's says device disconnected should I put it on fastbot or flash mod
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
I don't know why but my only problem is the device automatically disconnectes from flash tool after a minute I can't flash !!!! Please help
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Sal7_one said:
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Click to expand...
Click to collapse
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
ptmaniac said:
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
Click to expand...
Click to collapse
Nope after 1 minute flash mode turns off automatically soo now here is what I did
Step 1 downloaded sony c s
Step 2 installed supprot
Step3 press update device without contcing to pc
Step 4 chose repair
Step 5 go with it and put it in flash mode
Step 6 before it finishs it will take a long time
Then it will only charge you can't press the power button for some reason
Step 7 go to flash tool start flash mode and it will reboot automatically
Step8 you will be in safe mode go to settings and format the phone
Step 9 it will reboot and into normal mode
Step 10 root through king root and termanil to make it a real root not temporarliy
Step 11 enable usb debugging and install recovery
Step 12 copy the rom from pc to recovery
Step 13 installed the rom everything is amazing except for one problem
I still can't press the power button I don't think it's hardware help me
That's it thanks for everything tell me if you know anything about the power button
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
ptmaniac said:
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
Click to expand...
Click to collapse
Wtffffffff it's working again. I don't know how bro !!!! I just tested and it's start working again.
But one more problem sim card does not work yes I went to repir it thanks
@Sal7_one humm pwr button working when it wants and sim card problems... that sounds like a bad repair job they probably left a cable / connector loose inside your phone :| i would take it to the same place and make them check / repair the phone again