Hi to all! I've a very big problem! My x10 show me only Sony Ericsson.
Idid try to flash but nothing...pc don't recognize my phone...i tried with sues, pcc and flashtool...what can i try to solve it? please help me!!!!
ps: if i plug-in x10 without battery to pc, it show me the green led...and after hold back and put battery, it show me green led for 5-10 seconds and after the green led turn off and show me sony ericsson
What did you do to your X10 that made it do this? What did you try flashing via Flashtool that didn't work?
i was on miui e all gone well....after i tried to install the black edition HD...after that i had this problem...
if i try to connect in to flash mode x10 to pc, it don't work...the pc don't recognize my x10
Did you format your data after changing ROM?
Sent from my X10i using XDA App
yes i did it...
Maybe You have wrong kernel?
Shindoruk said:
yes i did it...
Click to expand...
Click to collapse
i don't know...but i don't think...but the problem is another...why can't i plug-in and flash it? why didn't pc recognize my x10?
HElp Help Help!!!!
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Panzerfaust101 said:
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Click to expand...
Click to collapse
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
As in, it doesn't recognise the device?
I think there's another way where you take the battery out and plug the phone into the computer. The green LED should light up for about 5-10 seconds (when it's in flash mode) where you have a window to select the firmware and flash. I haven't personally tried it, but I'm asking someone who has done it about how it's done. You might want to try that method as you can't really do much else with your phone right now. I'll update this post once I know the exact method and details
panzerfaust101 said:
i'll update this post once i know the exact method and details
Click to expand...
Click to collapse
thanks a lot
anything news? please i need help!!!!!!
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
pissat4motion said:
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
it doesn't work
try this man, http://forum.xda-developers.com/showthread.php?t=1504809
hope it helps
Help
Shindoruk said:
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
Click to expand...
Click to collapse
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
epep420 said:
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
Click to expand...
Click to collapse
If your bootloader is locked, you can choose the option to repair phone in pc comp. Another possibility why your phone is not detected might be because of drivers.
It may also because of his usb not working , the problem might have started . I want to check out whether your phone is charging and i also want to know that in devicemanager your phone when connected in flash mode shows as "semc usb device "
Thanks
Can U Access XRecovery Menu ?
Can U Access XRecovery Menu ?
- Connect Usb Cable -
- Mount System (in XRecovery) -
- Open Sony Pc Companion -
- Select Repair -
- it says connect your mobile in flash mode -
- u dont remove the cable -
- unmobut System (In XRecovery)
- remove usb cable -
connect in flash mode - IT REPAIRS YOUR MOBILE .
Try This Once..Worked For Me
Related
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom
Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
I installed MiniCM7Pro_V21 on my U20i after following the procedure correctly (rooting, flashing, xrecovery etc..). It was working well..
Then my friend told me to try an app called Viber. When I installed it, my phone IMEI number was gone (also SIM card was not working, had to buy a new one) and wifi was also not working..
I recovered back to 2.1 using the backup made by xrecovery (I had made that backup when installing MniCM7Pro_V21)...
Then I tried to install MiniCM7-2.1.5 using xrecovery. This time I just selected 'Install Custom ROM' in xrecovery and installed the ROM. While installing, it showed an error which was something like 'error: flashing kernel not done...' but it installed successfully.
When I reboot my phone, it is stuck at the Sony ericsson logo. I tried to go to xrecovery using Back + Power. It doesnt work..
Anyone please help.....
Ok it sounds like you flashed a rom for the mini and not mini pro. Looks like you have to use a software called SEUS (sony ericsson update service) to recover back to 2.1
Sent from my U20i using xda premium
Thanks
Thanks... I used to SEUS and it's working well now. Thanks again...
Not a problem
Sent from my U20i using xda premium
can you let me know how you updated your u20i particularily instaling xrecovery, i'm stuck here where flashtool hangs at recovery selector with no version available...
I want to update from 2.1.1 to anything later so i can run apps that need froya or later...
Installing CM7
step 0: verify your software version then & download ROM http://forum.xda-developers.com/showthread.php?t=1201116, download xrecovery
step 1: take backup of all contacts & all data you nee from your phone
step 2: remove memory card
step 3: do a factory reset
step 4: all the following steps worked fine for me, & you proceed at your own risk
step 5: enable USB debugging on your phone
step 6: connect data cable run superoneclick .exe file after extracting
step 7: after you get the message of success
step 8: run the xrecovery .bat file which will push the xrecovery files phone
step 9: after success message reboot phone with back key pressed continuously while sonyericsson logo appears for first time
step 10: you should be in recoveryconsole, if not check mistake and repeat step by step. If yes take backup of phone so that you can recover to the same old state
step 11: mount sdcard, mount usb send the CM7 v21 or whatever to USB, unmount usb/sdcard click on install custom ROM select the CM7 zip file
step 12: after completion of installation mount again in xrecovery and mount sdcard & USB copy all contents & backups to computer, delete all android 2.1 x related software folders [dont forget to copy data from within them before deleting]
step final: you reboot for the first time with your CM7 ready.
copying of folders & cleaning can be done with the old/2.1x system too to speed up.
all files needed are linked many times in this forum. search it if you don't have.
Help!!! I bricked my x10 mini while rebooting through recovery
Hi everybody, I am using x10 mini with cm7 (gingerdxv19). last day i have installed the gingerdxv21 and after successfully installing it I rebooted the phone via recovery. Unfortunately I have disabled the cwm recovery (even after getting the warning that "the process will not be undone"). Now I bricked my phone, only the sony ericsson logo appears for ever and no back key working. Please help on this....
Wrong rom for the kernel
This question may seem silly but will it be the same procedure apply for my U20i coz i flashed a rom that needed custom nAa kernel, but i did not flash the kernel (my fault for not reading the instructions).
I got the rom from this link:-
forum.xda-developers.com/showthread.php?t=1415026
Plz help
Mashun99 said:
This question may seem silly but will it be the same procedure apply for my U20i coz i flashed a rom that needed custom nAa kernel, but i did not flash the kernel (my fault for not reading the instructions).
I got the rom from this link:-
forum.xda-developers.com/showthread.php?t=1415026
Plz help
Click to expand...
Click to collapse
you have to unlock your boot loader and flash the right kernel so that the rom will work. if not youll be stuck with a bootloop
Listen tu me...
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
I read the guide to unlock boot loader and it says that we need to load into flash mode, but the thing is my phone does not load into flash mode. If it did load into flash mode I wont be having problems.
Try this...
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
I unlocked bootloader with this guide:
http://androidevil.blogspot.com/2011/12/guide-unlock-bootloader-xperia-x8-w8.html
Unlocked with flashtool, just remember you need to update your x10 mini pro to latest stock rom 2.1 via seus(if seus tolds you that your software is up to date,click repair software), after that enable debbuging mod and root via flashtool (first link up)the device before unlocking bootloader!!!
To load into flash mode:
1.open flashtool
2.hit thunder icon and choose Flashmode
3.choose the file you want to flash (put the file in firmware folder) and press ok
4.switch off your x10 mini pro(the flashtool guide will walk you trough)
5.hold the back button (right down corner button) and when you hold it, plug the device via USB and the flash will start.
x10 mini pro U20i - Hard Bricked after bootloader unlock
Sorry to ask you, but I come how managed to hard brick my x10 mini pro while I was unlocking the bootloader using flash tool
Now it is not responding at all, no led, no back button, no power on nthing, my system doesn't even detect the cable connected.
Any help will be appreciated alot.
Thanks
Husnainq said:
Sorry to ask you, but I come how managed to hard brick my x10 mini pro while I was unlocking the bootloader using flash tool
Now it is not responding at all, no led, no back button, no power on nthing, my system doesn't even detect the cable connected.
Any help will be appreciated alot.
Thanks
Click to expand...
Click to collapse
Does the phone lands into flash mode?? Connect the cable to the pc...then hold back button and connect the cable to ur phone...if green led glows, you are saved...then use SEUS software to flash the stock rom...if the LED doesnt glow,then the only way to get ur phone back is taking it to nearest service center...all d best mate:good:
Try to connect your charger many times... Sometimes the socket may give some problem...
I too had this type of problem many times. I just tried to wait. Sometimes it took the whole night on charge to bring back to cwm or the battery symbol.
Remove SIM, memory card battery. Let it drain the all the ram for 2 min. Then insert the charger at the phone end and finally the USB end to avoid shake at micro USB end.
If you expect the charge is low or 0, please try to put external charger, charge battery and insert.
I have flashed at least 15 to 20 times..... I have faced different problems. But cwm. 7.2.2.1 is the best of all...... Although 7.2.2.2 has already arrived....
Sent from my MultiRom By Java using xda app-developers app
---------- Post added at 04:40 PM ---------- Previous post was at 04:33 PM ----------
Husnainq said:
Sorry to ask you, but I come how managed to hard brick my x10 mini pro while I was unlocking the bootloader using flash tool
Now it is not responding at all, no led, no back button, no power on nthing, my system doesn't even detect the cable connected.
Any help will be appreciated alot.
Thanks
Click to expand...
Click to collapse
You need to make sure you have enough charge. The phone normally starts blinking red after few minutes or more if its dead and connected to charger. Then the continuous red and so on.... Sometimes even if you insert USB it won't respond if its dead.... Please take enough care before deciding....
Sent from my MultiRom By Java using xda app-developers app
Hello,
i know there are some threads that has have the same problem but i am german and its very hard to understand....
So my problem is:
I got a Sony Ericsson Xperia Ray AV 2.3.4
Today i installed the bootloader with fastboot and i follow this tutorial
Sony_Ericsson_Xperia_Ray:_Full_Update_Guide (on cyanogenmod)
its a CM7 Sony Ericsson Ray Tutorial //i can´t post the link here....?!
I used the newest stable mod (update-cm-7.1.0.2-XperiaRay-ST18i-signed.zip).
but after the last step, i reboot my phone and the only that i got is the CM7 loadscreen...
So thats why i try Wipe Dalvik Cache, wipe cache and factory...
Than i reboot again with the same result. Only the CM7 loadscreen.
Than i want to try flash an other ROM but there is no longer a Bootloader on my Phone...? Why?
Fastboot is possible but no data transfer and no debugmode or anything else.
Please use search and questions thread
Restore with seus
Chrizzel said:
Hello,
i know there are some threads that has have the same problem but i am german and its very hard to understand....
So my problem is:
I got a Sony Ericsson Xperia Ray AV 2.3.4
Today i installed the bootloader with fastboot and i follow this tutorial
Sony_Ericsson_Xperia_Ray:_Full_Update_Guide (on cyanogenmod)
its a CM7 Sony Ericsson Ray Tutorial //i can´t post the link here....?!
I used the newest stable mod (update-cm-7.1.0.2-XperiaRay-ST18i-signed.zip).
but after the last step, i reboot my phone and the only that i got is the CM7 loadscreen...
So thats why i try Wipe Dalvik Cache, wipe cache and factory...
Than i reboot again with the same result. Only the CM7 loadscreen.
Than i want to try flash an other ROM but there is no longer a Bootloader on my Phone...? Why?
Fastboot is possible but no data transfer and no debugmode or anything else.
Click to expand...
Click to collapse
it is because you installed official CM7 for ray , as i know it is 7.1.0.1
This Cyanogenmod have boot loop issue , so dont worry download old version of cyanogenmod and install it as you installed OLD
SEUS?! I looking for SEUS but it can´t find my phone. I installed the software an connect my phone with usb, but i can only connect with the fastboot mode i mean the mode:
Press the VOL Up Button while connecting USB than the LED in my phone glowes blue.
If u know any answer don´t say look here or there i read over 100 posts today i am totally finished i begin to punish my self ...-.-
i need help
Chrizzel said:
SEUS?! I looking for SEUS but it can´t find my phone. I installed the software an connect my phone with usb, but i can only connect with the fastboot mode i mean the mode:
Press the VOL Up Button while connecting USB than the LED in my phone glowes blue.
If u know any answer don´t say look here or there i read over 100 posts today i am totally finished i begin to punish my self ...-.-
i need help
Click to expand...
Click to collapse
YOU need to use the right thread
Download the ftf file for .42 firmware HERE and use flashtool to flash it, plug your phone in with usb to pc while holding down on volume the light should go green and then you can flash the ftf in flash mode
if that fails you need to make sure you have a cm kernel flashed using flashtool
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
Chrizzel said:
SEUS?! I looking for SEUS but it can´t find my phone. I installed the software an connect my phone with usb, but i can only connect with the fastboot mode i mean the mode:
Press the VOL Up Button while connecting USB than the LED in my phone glowes blue.
If u know any answer don´t say look here or there i read over 100 posts today i am totally finished i begin to punish my self ...-.-
i need help
Click to expand...
Click to collapse
If you dont want to look here or there or even try to search for it yourself then why should anyone help you ??
xperia ray said:
it is because you installed official CM7 for ray , as i know it is 7.1.0.1
This Cyanogenmod have boot loop issue , so dont worry download old version of cyanogenmod and install it as you installed OLD
Click to expand...
Click to collapse
Ah thank you =) but how??
Please help me... i don´t know how cause i don´t longer have a bootloader
how i can flash only with fastboot?!
Edit:
Download the ftf file for .42 firmware HERE and use flashtool to flash it, plug your phone in with usb to pc while holding down on volume the light should go green and then you can flash the ftf in flash mode
if that fails you need to make sure you have a cm kernel flashed using flashtool
-------------------------------------------------------------------------
thank you =) i would test it. Don´t worry i am a very nervous German Guy =)
Chrizzel said:
Ah thank you =) but how??
Please help me... i don´t know how cause i don´t longer have a bootloader
how i can flash only with fastboot?!
Edit:
Download the ftf file for .42 firmware HERE and use flashtool to flash it, plug your phone in with usb to pc while holding down on volume the light should go green and then you can flash the ftf in flash mode
if that fails you need to make sure you have a cm kernel flashed using flashtool
-------------------------------------------------------------------------
thank you =) i would test it. Don´t worry i am a very nervous German Guy =)
Click to expand...
Click to collapse
The answers to all your problems are there, all you need to do is look and search. There is no need to panic it can fixed, but first look to fix it yourself and make sure you no what you are doing and how to put it back if it doesnt work, should always read the whole thread of what rom or kernel you are flashing to make sure you understand in first
Hi guys,
I'm not an Android expert, but AFAIK is a Linux system.
I'm quite familiar with Unix/Linux world and wondering if there's a way to see the messages during boot just like on a console?
I'm asking, beacause my ray hangs at sony-ericsson logo, and can't figure out what's wrong with it.
Thank you!
to solve problem .. flash your stock .ftf again with flashtool
Well u can use adb for that...use adb logcat...search in xda if u don't know how to use adb...it will give u a complete log as u need
Cheers,
AJ
Mohamed Hashem said:
to solve problem .. flash your stock .ftf again with flashtool
Click to expand...
Click to collapse
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
nroberto13 said:
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
Click to expand...
Click to collapse
i think usb debug will not work anyway if ur phone powered off
try to flash custom kernel again , then u will have CWM , then remove your SD Card and put it in reader , then put any ROM in it , then put it again in ur phone , then flash it with CWM , i made that before with CM ROM & it worked :good:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
nroberto13 said:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
Click to expand...
Click to collapse
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
mihahn said:
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
I flashed a custom rom.
Actually, i was on ICS, and wanted to try custom GB illuminative.
Flashed the v10, everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash some times the rom without issues, but the last was unlucky .
By that time, my BL was locked, so I had to root my phone to install cwm.
Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the process over and flashed GB .42, rooted with doomlord, script, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
basically these were the steps I was doing, and after a cwm flash of the custom rom, the phone ended hanging at sony logo.
I then tried different kind of stock firmwars ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flash a version of the illuminative custom rom which was working before, but still the sam. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same.
now, cwm is gone, as stock kernel overwrote the custom one.
That's the story .
As i remember i can enable usb debug even phone not boot to system. By charging phone with pc(not standard charger) then hold power button and at windows(or else) will ask for driver
Ps. I did that with X8, didn't know with 2011's phone.
Sent from my ST27i using xda app-developers app
Hmm okay you could try to flash the unbricking ftf (you can find it in someguyfromhell's sticked thread) and afterwards stock gingerbread or ics again, but I don't know if that could work or maybe make it even worse (normally it's to unbrick if you did an ota update on unlocked bootloader, but let's see). Maybe it's worth a try
The problem about cwm that's gone: if you are still able to boot into fastboot mode, you can flash another kernel and for example try to install cyanogenmod or any other rom. Just try cm10 or cm10.1. Maybe in the end a rom will boot
Sent from my SK17i running stock ics (.587)
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
nroberto13 said:
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Click to expand...
Click to collapse
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
eswawan said:
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
yes, it goes to offline charging mode!
mihahn said:
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
nroberto13 said:
yes, it goes to offline charging mode!
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
Click to expand...
Click to collapse
With the procedure I posted above it shouldn't simply boot to offline charging mode, so maybe it is a driver problem. Try it step by step like posted above, maybe it could work. If not it was worth a try
Sent from my SK17i running stock ics (.587)
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
PS. not sure if it's right, but when I connect the phone to pc, connects in flash mode, even if I don't hold vol down, the notification led is solid green, then the led turns off, Sony Ericsson appears, then the battery with the power sign and finally notification led turns orange. when I short press power button now, the battery with power sign shows up on screen.
nroberto13 said:
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
Click to expand...
Click to collapse
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
mihahn said:
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Sorry, I think I wasn't clear enough. I thought I should be connecting the phone without holding any of the volume buttons, just to try if it's charging in offline mode. Here's the exact status.
1. If I do not hold any volume buttons, the phone goes into flash mode ( solid green led ), and after a short while ( 20-30 sec ) led turns off, Sony Ericsson logo shows up, then goes away and battery with power sign is displayed when I short press the power button
2. if I hold vol down, phone behaves the same way as at 1.
3. if I hold vol up, phone goes in fastboot mode ( solid blue led ) and stay solid blue, it is not going into charging mode.
Abhinav2 said:
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
Click to expand...
Click to collapse
I may not be clear enough here either. I didn't use sus after unlocking BL, I know it bricks he phone, anyway, I did flash the unbrick ftf mentioned by mihahn. here are the steps I did so far :
1. I was on ICS ( Iced Bean 3.4 ) , with BL lockedand phone rooted and wanted to try custom GB illuminative.
2. I flashed the rom with cwm, and everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash the rom several times, without issues, but the last was unlucky .
3. Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the rooting process over and flashed GB .42, rooted with flashtool, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
4. and after a cwm flash of the custom rom, the phone ended hanging at sony ericsson logo.
5. I then tried different kind of stock firmwares ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
6. afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flashed a version of the above mentioned GB illuminative custom rom which was working before, but still the same.
7. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same, now, cwm is gone, as stock kernel overwrote the custom one.
8. tried to flash someguyfromhell's unbrick ftf, which is for the FOTA brick whith BL unlocked, as I understood.
9. reflashed stock GB .42 with flashtool, but phone still hangs at sony Ericsson logo.
In this status, could I connect to the phone using adb, so I could do a adb logcat ?
If so, please advise how.
Thanks.
@nroberto13 Do you mind telling us which ftfs u flashed?
Cheers,
AJ