Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
Related
It was working fine until i pressed one of tha settings on the menu, and now it wont boot... Crap this.
i have installed everything i need including the stuff, rooted fine, but i just can't start the phone!!!!
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ok all good
Thanks to all who helped
found solution
just use Sony Ericsson Update Service from here:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Press back button before connecting the cable and connect the cable.
If u see green light, ur phone is in flash mode!!!
in flash mode what to do?
ice_pick88 said:
in flash mode what to do?
Click to expand...
Click to collapse
In flashmode you can reflash the android system on your phone, either with SE's official tool (gives your the latest SE version), or with i.e. flashtool, withch allows you to choose what to flash your phone with.
Keep off your phone, connect with USB and press Back button. Stop press Back when green LED is here
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
Hope this helps and good luck
Sent from my X10i using XDA Premium App
same problem
My phone wasn't connecting to the pc companion because it only shows the "sony ericsson screen" when i open it..how could i connect it to pc companion?
tyufool said:
My phone wasn't connecting to the pc companion because it only shows the "sony ericsson screen" when i open it..how could i connect it to pc companion?
Click to expand...
Click to collapse
Try flashing it via Flashtool...
Hi everybody ////////-----------------
I'm no expert in this section........ but I want you all to understand clearly( I didn't mean that Willey1986's guide not clear)
But for some new members, hard to understand that
First download FTF bundle & Recovery image from below link
http://forum.xda-developers.com/showthread.php?t=1192152
download Xrecovery 0.3GBready.zip from following link
http://forum.xda-developers.com/showthread.php?t=859571
here step by step,
1/-Flash 2.1 update1 stock rom with the lastest flash tool.......
2/-After that root your x10 with super one click
3/-After that install busy box.... then install Xrecovery 0.3(not GBready)
4/-Backup your current rom using xrecovery ,,,,, reboot
5/-Extract prerooted zip to your pc desktop , you will see one folder
6/-Then connect your phone with pc and mount sd card
open your memory card/xrecovery/backup/your backup date(folder)
7/-You will need to delete your backup date(folder) and replace with prerooted
folder
8/-Copy and paste Xrecovery 0.3 GB ready.zip to your sd card
9/-Then disconnect with pc and your phone and switch off your phone
10/-Boot up your phone with xrecovery and restore your backup folder
11/-And flash Xrecovery 0.3 GB ready.zip
12/-If finished, don't reboot your phone
13/-Take out your battery and flash FTF bundle (Extracted ftf file) with flash
tool
14/-Now start your x10i and ENJOY
THIS IS NOT MY ROM ,,,,,, I JUST SHOW HOW I DID
THANK YOU ALL.............
For point 2 and
3 you can do it with flashtool
Sent from my X10i using XDA App
Yeap!!!!
As you say.... can finish that point 2 and 3 with flash tool....
But that is a little bit hard to understand for some peoples
http://forum.xda-developers.com/showthread.php?t=1193753
good try btw.appreciated
Cheers for the guide Just one thing i think im misssing some drivers or somthing.
When i connect my phone and then start up flashtools it says X10 connected ect ect. Then i click flash select my firmware then it says preparing files for flashing then after that asks me to power off my phone ect and then i go to hold the usb and connect phone but it won't connect i have tried a numerous amount of times and its not having it.
Anybody know what my problem is cheers.
Cheers Jacko_oafc ..... sorry for that
there is something missing
b4 you flash you need to switch off your phone take out battery
then open flashtool and press flash button
then connect your usb cable to your pc and press your phone back button (don't release you hand ) and put usb cable to your phone(still need to press back button) and put battery you can see green light on your phone now release your hand from back button ... that's all
Ewaret said:
Cheers Jacko_oafc ..... sorry for that
there is something missing
b4 you flash you need to switch off your phone take out battery
then open flashtool and press flash button
then connect your usb cable to your pc and press your phone back button (don't release you hand ) and put usb cable to your phone(still need to press back button) and put battery you can see green light on your phone now release your hand from back button ... that's all
Click to expand...
Click to collapse
Tried that but its still not having it works on the laptop but no on my desktop PC must be missing drivers or somthing.
jacko_oafc said:
Tried that but its still not having it works on the laptop but no on my desktop PC must be missing drivers or somthing.
Click to expand...
Click to collapse
Then send your computer to me....
I will format for you.......
I'm 8pert in that section
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
I installed MiniCM7Pro_V21 on my U20i after following the procedure correctly (rooting, flashing, xrecovery etc..). It was working well..
Then my friend told me to try an app called Viber. When I installed it, my phone IMEI number was gone (also SIM card was not working, had to buy a new one) and wifi was also not working..
I recovered back to 2.1 using the backup made by xrecovery (I had made that backup when installing MniCM7Pro_V21)...
Then I tried to install MiniCM7-2.1.5 using xrecovery. This time I just selected 'Install Custom ROM' in xrecovery and installed the ROM. While installing, it showed an error which was something like 'error: flashing kernel not done...' but it installed successfully.
When I reboot my phone, it is stuck at the Sony ericsson logo. I tried to go to xrecovery using Back + Power. It doesnt work..
Anyone please help.....
Ok it sounds like you flashed a rom for the mini and not mini pro. Looks like you have to use a software called SEUS (sony ericsson update service) to recover back to 2.1
Sent from my U20i using xda premium
Thanks
Thanks... I used to SEUS and it's working well now. Thanks again...
Not a problem
Sent from my U20i using xda premium
can you let me know how you updated your u20i particularily instaling xrecovery, i'm stuck here where flashtool hangs at recovery selector with no version available...
I want to update from 2.1.1 to anything later so i can run apps that need froya or later...
Installing CM7
step 0: verify your software version then & download ROM http://forum.xda-developers.com/showthread.php?t=1201116, download xrecovery
step 1: take backup of all contacts & all data you nee from your phone
step 2: remove memory card
step 3: do a factory reset
step 4: all the following steps worked fine for me, & you proceed at your own risk
step 5: enable USB debugging on your phone
step 6: connect data cable run superoneclick .exe file after extracting
step 7: after you get the message of success
step 8: run the xrecovery .bat file which will push the xrecovery files phone
step 9: after success message reboot phone with back key pressed continuously while sonyericsson logo appears for first time
step 10: you should be in recoveryconsole, if not check mistake and repeat step by step. If yes take backup of phone so that you can recover to the same old state
step 11: mount sdcard, mount usb send the CM7 v21 or whatever to USB, unmount usb/sdcard click on install custom ROM select the CM7 zip file
step 12: after completion of installation mount again in xrecovery and mount sdcard & USB copy all contents & backups to computer, delete all android 2.1 x related software folders [dont forget to copy data from within them before deleting]
step final: you reboot for the first time with your CM7 ready.
copying of folders & cleaning can be done with the old/2.1x system too to speed up.
all files needed are linked many times in this forum. search it if you don't have.
Help!!! I bricked my x10 mini while rebooting through recovery
Hi everybody, I am using x10 mini with cm7 (gingerdxv19). last day i have installed the gingerdxv21 and after successfully installing it I rebooted the phone via recovery. Unfortunately I have disabled the cwm recovery (even after getting the warning that "the process will not be undone"). Now I bricked my phone, only the sony ericsson logo appears for ever and no back key working. Please help on this....
Wrong rom for the kernel
This question may seem silly but will it be the same procedure apply for my U20i coz i flashed a rom that needed custom nAa kernel, but i did not flash the kernel (my fault for not reading the instructions).
I got the rom from this link:-
forum.xda-developers.com/showthread.php?t=1415026
Plz help
Mashun99 said:
This question may seem silly but will it be the same procedure apply for my U20i coz i flashed a rom that needed custom nAa kernel, but i did not flash the kernel (my fault for not reading the instructions).
I got the rom from this link:-
forum.xda-developers.com/showthread.php?t=1415026
Plz help
Click to expand...
Click to collapse
you have to unlock your boot loader and flash the right kernel so that the rom will work. if not youll be stuck with a bootloop
Listen tu me...
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
I read the guide to unlock boot loader and it says that we need to load into flash mode, but the thing is my phone does not load into flash mode. If it did load into flash mode I wont be having problems.
Try this...
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
I unlocked bootloader with this guide:
http://androidevil.blogspot.com/2011/12/guide-unlock-bootloader-xperia-x8-w8.html
Unlocked with flashtool, just remember you need to update your x10 mini pro to latest stock rom 2.1 via seus(if seus tolds you that your software is up to date,click repair software), after that enable debbuging mod and root via flashtool (first link up)the device before unlocking bootloader!!!
To load into flash mode:
1.open flashtool
2.hit thunder icon and choose Flashmode
3.choose the file you want to flash (put the file in firmware folder) and press ok
4.switch off your x10 mini pro(the flashtool guide will walk you trough)
5.hold the back button (right down corner button) and when you hold it, plug the device via USB and the flash will start.
x10 mini pro U20i - Hard Bricked after bootloader unlock
Sorry to ask you, but I come how managed to hard brick my x10 mini pro while I was unlocking the bootloader using flash tool
Now it is not responding at all, no led, no back button, no power on nthing, my system doesn't even detect the cable connected.
Any help will be appreciated alot.
Thanks
Husnainq said:
Sorry to ask you, but I come how managed to hard brick my x10 mini pro while I was unlocking the bootloader using flash tool
Now it is not responding at all, no led, no back button, no power on nthing, my system doesn't even detect the cable connected.
Any help will be appreciated alot.
Thanks
Click to expand...
Click to collapse
Does the phone lands into flash mode?? Connect the cable to the pc...then hold back button and connect the cable to ur phone...if green led glows, you are saved...then use SEUS software to flash the stock rom...if the LED doesnt glow,then the only way to get ur phone back is taking it to nearest service center...all d best mate:good:
Try to connect your charger many times... Sometimes the socket may give some problem...
I too had this type of problem many times. I just tried to wait. Sometimes it took the whole night on charge to bring back to cwm or the battery symbol.
Remove SIM, memory card battery. Let it drain the all the ram for 2 min. Then insert the charger at the phone end and finally the USB end to avoid shake at micro USB end.
If you expect the charge is low or 0, please try to put external charger, charge battery and insert.
I have flashed at least 15 to 20 times..... I have faced different problems. But cwm. 7.2.2.1 is the best of all...... Although 7.2.2.2 has already arrived....
Sent from my MultiRom By Java using xda app-developers app
---------- Post added at 04:40 PM ---------- Previous post was at 04:33 PM ----------
Husnainq said:
Sorry to ask you, but I come how managed to hard brick my x10 mini pro while I was unlocking the bootloader using flash tool
Now it is not responding at all, no led, no back button, no power on nthing, my system doesn't even detect the cable connected.
Any help will be appreciated alot.
Thanks
Click to expand...
Click to collapse
You need to make sure you have enough charge. The phone normally starts blinking red after few minutes or more if its dead and connected to charger. Then the continuous red and so on.... Sometimes even if you insert USB it won't respond if its dead.... Please take enough care before deciding....
Sent from my MultiRom By Java using xda app-developers app
Hi to all! I've a very big problem! My x10 show me only Sony Ericsson.
Idid try to flash but nothing...pc don't recognize my phone...i tried with sues, pcc and flashtool...what can i try to solve it? please help me!!!!
ps: if i plug-in x10 without battery to pc, it show me the green led...and after hold back and put battery, it show me green led for 5-10 seconds and after the green led turn off and show me sony ericsson
What did you do to your X10 that made it do this? What did you try flashing via Flashtool that didn't work?
i was on miui e all gone well....after i tried to install the black edition HD...after that i had this problem...
if i try to connect in to flash mode x10 to pc, it don't work...the pc don't recognize my x10
Did you format your data after changing ROM?
Sent from my X10i using XDA App
yes i did it...
Maybe You have wrong kernel?
Shindoruk said:
yes i did it...
Click to expand...
Click to collapse
i don't know...but i don't think...but the problem is another...why can't i plug-in and flash it? why didn't pc recognize my x10?
HElp Help Help!!!!
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Panzerfaust101 said:
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Click to expand...
Click to collapse
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
As in, it doesn't recognise the device?
I think there's another way where you take the battery out and plug the phone into the computer. The green LED should light up for about 5-10 seconds (when it's in flash mode) where you have a window to select the firmware and flash. I haven't personally tried it, but I'm asking someone who has done it about how it's done. You might want to try that method as you can't really do much else with your phone right now. I'll update this post once I know the exact method and details
panzerfaust101 said:
i'll update this post once i know the exact method and details
Click to expand...
Click to collapse
thanks a lot
anything news? please i need help!!!!!!
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
pissat4motion said:
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
it doesn't work
try this man, http://forum.xda-developers.com/showthread.php?t=1504809
hope it helps
Help
Shindoruk said:
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
Click to expand...
Click to collapse
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
epep420 said:
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
Click to expand...
Click to collapse
If your bootloader is locked, you can choose the option to repair phone in pc comp. Another possibility why your phone is not detected might be because of drivers.
It may also because of his usb not working , the problem might have started . I want to check out whether your phone is charging and i also want to know that in devicemanager your phone when connected in flash mode shows as "semc usb device "
Thanks
Can U Access XRecovery Menu ?
Can U Access XRecovery Menu ?
- Connect Usb Cable -
- Mount System (in XRecovery) -
- Open Sony Pc Companion -
- Select Repair -
- it says connect your mobile in flash mode -
- u dont remove the cable -
- unmobut System (In XRecovery)
- remove usb cable -
connect in flash mode - IT REPAIRS YOUR MOBILE .
Try This Once..Worked For Me