It was working fine until i pressed one of tha settings on the menu, and now it wont boot... Crap this.
i have installed everything i need including the stuff, rooted fine, but i just can't start the phone!!!!
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ok all good
Thanks to all who helped
found solution
just use Sony Ericsson Update Service from here:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Press back button before connecting the cable and connect the cable.
If u see green light, ur phone is in flash mode!!!
in flash mode what to do?
ice_pick88 said:
in flash mode what to do?
Click to expand...
Click to collapse
In flashmode you can reflash the android system on your phone, either with SE's official tool (gives your the latest SE version), or with i.e. flashtool, withch allows you to choose what to flash your phone with.
Keep off your phone, connect with USB and press Back button. Stop press Back when green LED is here
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
Hope this helps and good luck
Sent from my X10i using XDA Premium App
same problem
My phone wasn't connecting to the pc companion because it only shows the "sony ericsson screen" when i open it..how could i connect it to pc companion?
tyufool said:
My phone wasn't connecting to the pc companion because it only shows the "sony ericsson screen" when i open it..how could i connect it to pc companion?
Click to expand...
Click to collapse
Try flashing it via Flashtool...
Related
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
I have two x10 unlocked a total functional
the other trying to do the same, do not care anymore.
and even with FlashTool Debranding but not start.
connects the screen but does not appear or the sony logo.
what to do, someone help me.
he is in total Debranding mamento with android 1.6
sorry but I do not know English, using google translator.
A quick reply, go to sony ericsson site download PC companion to your computer.
Install PC companion to your computer
Connect phone to computer
Click repair.
amrth said:
A quick reply, go to sony ericsson site download PC companion to your computer.
Install PC companion to your computer
Connect phone to computer
Click repair.
Click to expand...
Click to collapse
I tried the one message that says
Your phone already has the latest softwere
I can do for FlashTool, everything happens in a good
but when you plug the x10 he is with the backlight on
but not in the game
Try flashing one of these in flashtool
http://forum.xda-developers.com/showthread.php?t=936733
gleybert said:
I tried the one message that says
Your phone already has the latest softwere
I can do for FlashTool, everything happens in a good
but when you plug the x10 he is with the backlight on
but not in the game
Click to expand...
Click to collapse
Ok do this,
What does the flashtool state when your phone is connected with the backlight on?
Device disconnected? in MTP mode?
Check the adb drivers and if possible reinstall them
BTW how did you get into this problem? did you try to update a firmware or kernel or what?
Then Try this trick!!!
* Remove the battery.
* Connect your phone to system with the battery still out.
* Now hold the back button and put the battery on, green led will glow.
* Now you are on flash mode and this would stay for not more than 5-10 secs, You should have quick fingers, so that you should select the firmware or any update within those ten sec's. Keep trying this will work...
Get all the necessary files in place before you try this.
I have one problem with my x10, I've tried to update software to Android 2.3, but in the middle of update I have accidently cancled installation. Now phone won't turn on it is freezing at the SE logo, I also can't connect it with PC. I have tried with PC Companion, Flashtool, S1tool also with repair option in PC companion, but the PC won't recognize phone. I have installed xRecovery which also I can't reach now, but just for the record I'am abel to get into flash mode(green diode lights up, when I hold back button and plug usb), but obviesly it doesen't matter because the PC won't recognize the device.
Is there any way the bring this thing from death?
djura123 said:
I have one problem with my x10, I've tried to update software to Android 2.3, but in the middle of update I have accidently cancled installation. Now phone won't turn on it is freezing at the SE logo, I also can't connect it with PC. I have tried with PC Companion, Flashtool, S1tool also with repair option in PC companion, but the PC won't recognize phone. I have installed xRecovery which also I can't reach now, but just for the record I'am abel to get into flash mode(green diode lights up, when I hold back button and plug usb), but obviesly it doesen't matter because the PC won't recognize the device.
Is there any way the bring this thing from death?
Click to expand...
Click to collapse
Did you put it in flashmode when the repair-mode of PC Companion asked for it?
SmG67 said:
Did you put it in flashmode when the repair-mode of PC Companion asked for it?
Click to expand...
Click to collapse
Yes, and nothing is happening.
Tnx for replay.
djura123 said:
Yes, and nothing is happening.
Tnx for replay.
Click to expand...
Click to collapse
As long as it can reach flashmode you can recover it, maybe try a different usb-port. You're using the original cable that came with the phone?
SmG67 said:
As long as it can reach flashmode you can recover it, maybe try a different usb-port. You're using the original cable that came with the phone?
Click to expand...
Click to collapse
The cabel is original. Yes I have tried different usb ports but still nothing happens. I will try later again, but that doesn't give me hope.
djura123 said:
The cabel is original. Yes I have tried different usb ports but still nothing happens. I will try later again, but that doesn't give me hope.
Click to expand...
Click to collapse
Maybe you can try keeping the usb-cable plugged in, and when it asks for flashmode press home-and powerbuttons at the same time, but only when it asks for flashmode, not before that. If the phone is in flashmode before the software is ready it won't work.
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
madjacky said:
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
Click to expand...
Click to collapse
Have you tried flash mode? Try taking it to a local Sony shop.
Sent from my WT19i using xda app-developers app
hjhita979 said:
Have you tried flash mode? Try taking it to a local Sony shop.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
I've tried everything, flashmode and drivers put everything but after I installed the firmware via cwm recovery teleofn not vkyuchaetsya when I connect the phone to the computer the computer does not recognize the device but when you connect the phone to the visitor's computer when the volume push down the green light is on.sorry for my bad english.a problem with the phone can mean that the phone is dead?
Try SEUS
Try using Sony Ericsson Update Software for making restore of your operating system back .
i'm try but pc can't reconized phone when i'm connecting phone to pc
Hmmm...if there a green light when your press volume down and connect it to your pc then it show that your phone is on flashmode....
now the proper way to flash stock rom using flashtool is.....
1. disconnect your phone from pc and turn off your phone....'
2. open flashtool....
3. click on the flash button onfalshtool and select flashmode...
4. one popup will appear...select stock rom from there and remember to tick all box in wipe and untick "no final verification" box in misc...
5. after selecting all above, press ok....wait for flashtool to prepare all needed files fro flashing....
6. once the flies is prepare, another popup will appear asking to connect your phone in flashmode (that popup will ask you to connect and press back button) don't press the back button...just press volume down and connect your phone....
7. once connected just relax and let flashtool do its magic....
8. if you done correctly the log will confirm that you have successfully flash your phone....
9. disconnect your phone and reboot...
10.done.....
OP please keep to one thread....thanks
http://forum.xda-developers.com/showthread.php?t=2382151