I've already unlocked bootloader and rooted device, following which I realized that there is no s-off option for me on the current hboot I have (1.44 after May) and not realizing that s-off is available for the latest AT&T release with 4.3. This is my second HTC device but it is my first go at s-off. I've been doing a lot of research but keep hitting dead ends it seems. Ideally, I would like to flash back to stock recovery and unroot by flashing stock 1.26.502.15 RUU (which is what I am currently on) so I can get OTA then use rumrunner to obtain s-off. I've also looked into downgrading/upgrading the current software number from 1.26.502.15 to 1.26.502.12/3.17.502.3 so I can use revone/rumrunner but I can't confirm whether or not I can flash RUU without being s-off'ed. If anyone can provide any advise I would greatly appreciate it. I'm also not sure if I'm using the terminologies correctly or if this is even posted in the right section.. Thanks in advance!
If you are currently on .12 firmware then you should still have 1.44 HBoot. If so, all you need is REVONE to S-Off. Doing anything else will make it even more of a chore. I believe if you update after then it is S-On again unless you flash one of the other ROM's that are available. You can also run the current RUU from the HTC website to give you the 4.3 update, but you will have 1.55, thus having to use Rumrunner. To run the current RUU, I think you have to relock it too, and unlock it again, at least I did with AIO. You can run any RUU without S-Off that is compatible with ATT. If you want the Brightstar GPE RUU, then yes, you must have S-Off, and change the CID to match that version, and etc for other versions.
hack14u said:
If you are currently on .12 firmware then you should still have 1.44 HBoot. If so, all you need is REVONE to S-Off. Doing anything else will make it even more of a chore. I believe if you update after then it is S-On again unless you flash one of the other ROM's that are available. You can also run the current RUU from the HTC website to give you the 4.3 update, but you will have 1.55, thus having to use Rumrunner. To run the current RUU, I think you have to relock it too, and unlock it again, at least I did with AIO. You can run any RUU without S-Off that is compatible with ATT. If you want the Brightstar GPE RUU, then yes, you must have S-Off, and change the CID to match that version, and etc for other versions.
Click to expand...
Click to collapse
I'm on .15 right now but didn't know if I could update to HTC website 4.3 because I am currently unlocked and rooted and do not have s-off. When I relocked bootloader and tried OTA I had to reboot and it just kept rebooting to TWRP and would not update successfully. So I didn't think the manual update would work?
The manual update will work, but it will WIPE everything. Been there done that, not a big deal though. Went through it, re-unlocked, re-flashed CWM, and that was that. I was going to do S-Off to get the GPE RUU, but heck, with the ATT Remove Bloat script, don't see the need anymore. Got 4.3 running as smooth as it can be, no ATT bloat, and GREAT battery life.
So even though I do NOT have S-off, I can still use the HTC released update to flash onto my phone with the current modifications that I've made already (Unlock and root on JB 4.1.2, software 1.26.502.15, hboot 1.44)? I was under the impression that with S-ON you cannot flash RUU, is that not correct? In the current state, I have to just re-lock bootloader and I can install the official HTC released update? And after which all my data will be wiped, including the custom recovery (TWRP) and root, all of this will be gone? (which is fine) I just have been researching and see that bricking the device is more likely to happen if the device is S-ON and you attempt to flash.
Rumrummer actually has a version available for 1.26.502.15, I used it on Sunday successfully to gain s-off with my mom's phone.
LightSpeedIII said:
Rumrummer actually has a version available for 1.26.502.15, I used it on Sunday successfully to gain s-off with my mom's phone.
Click to expand...
Click to collapse
are you shure? i have a htc one at&t on my hands with 1.26.502.15 firmware and it can not be done. I think you are very confused, 1.26.502.12 firmware is not the same!
---------- Post added at 12:03 PM ---------- Previous post was at 11:55 AM ----------
merck3d said:
So even though I do NOT have S-off, I can still use the HTC released update to flash onto my phone with the current modifications that I've made already (Unlock and root on JB 4.1.2, software 1.26.502.15, hboot 1.44)? I was under the impression that with S-ON you cannot flash RUU, is that not correct? In the current state, I have to just re-lock bootloader and I can install the official HTC released update? And after which all my data will be wiped, including the custom recovery (TWRP) and root, all of this will be gone? (which is fine) I just have been researching and see that bricking the device is more likely to happen if the device is S-ON and you attempt to flash.
Click to expand...
Click to collapse
With S-ON
As far as i have read, you can:
Update to a newer firmware. (but i don't really know if you can flash another htc one rom model, eg. flash an m7 rom into a m7att phone)
Reflash the same stock firmware via recovery (http://www.htc1guru.com/downloads)
YOU CAN NOT DOWNGRADE.
Install CWM Recovery or TWRP Recovery.
Root.
mpjoe2000 said:
-snip-
Click to expand...
Click to collapse
I am very sure, I still have the zip in my downloads folder, however, Rumrunner has been updated to be universal across most firmwares, this should include 1.26.502.15 because there was a version of rumrunner for it previously. Just go to rumrunner.us and follow their instructions.
LightSpeedIII said:
I am very sure, I still have the zip in my downloads folder, however, Rumrunner has been updated to be universal across most firmwares, this should include 1.26.502.15 because there was a version of rumrunner for it previously. Just go to rumrunner.us and follow their instructions.
Click to expand...
Click to collapse
you are right!!! i have a linux firewall old pc at home + a tplink open-wrt firmware, and i had to connect my modem's internet device directly to my pc to allow rumrunner to work properly!
No problem, glad I could help
Related
This thread is regarding RUU for HTC devices.
I've seen some similar threads but could not fully get the answer I was looking for.
From what I already understand, a RUU updates the ROM, the H-BOOT possibly and updates the recovery with a stock recovery. It cannot do anything that a BL-Unlocked user cannot do through adb or fastboot because the RUU uses only adb and fastboot. This means that the RUU does not (And cannot) update the radio. Am I correct in this?
And if so, what is the point of updating the RUU once you start flashing custom ROMs because they also flash the /system and /boot partitions and the only thing a custom ROM doesn't do is reflash the H-BOOT and the recovery.
And even if you update using a RUU for some reason (Whether it updates or if you just want to return to stock), do you have to choose the RUU that exactly matches your current radio version?
Assume for all the questions that the device is either BL-Unlocked or Stock (But S-ON either way).
Thanks in advance.
AceRoom said:
This thread is regarding RUU for HTC devices.
I've seen some similar threads but could not fully get the answer I was looking for.
From what I already understand, a RUU updates the ROM, the H-BOOT possibly and updates the recovery with a stock recovery. It cannot do anything that a BL-Unlocked user cannot do through adb or fastboot because the RUU uses only adb and fastboot. This means that the RUU does not (And cannot) update the radio. Am I correct in this?
And if so, what is the point of updating the RUU once you start flashing custom ROMs because they also flash the /system and /boot partitions and the only thing a custom ROM doesn't do is reflash the H-BOOT and the recovery.
And even if you update using a RUU for some reason (Whether it updates or if you just want to return to stock), do you have to choose the RUU that exactly matches your current radio version?
Assume for all the questions that the device is either BL-Unlocked or Stock (But S-ON either way).
Thanks in advance.
Click to expand...
Click to collapse
Hi, an ruu updates what you mentioned and a lot more. It will do things like change the splash screen, update the radio. and change the hboot which you cannot do with only an unlocked bootloader. It can do those things because its signed.
I had to use ruu's a few times, recently for an hboot downgrade to achieve s-off. Now that I have s-off I can flash any file I want in hboot asblong as its named correctly. Like a splash screen, or a lower hboot version.
Since an ruu updates the radio, it doesn't matter which version you choose, as long as its the same version you have or higher, but it won't let you flash a lower versionWith s-off I can flash any ruu version I want.
ok, so if I am currently running 2.3.4 and htc sense 3.0, does that mean that I can flash my phone with ics (4.0) as long as it is for the right phone and carrier???
HTC evo 3D with Rogers
icecursor said:
ok, so if I am currently running 2.3.4 and htc sense 3.0, does that mean that I can flash my phone with ics (4.0) as long as it is for the right phone and carrier???
HTC evo 3D with Rogers
Click to expand...
Click to collapse
Yes.
Theonew said:
Yes.
Click to expand...
Click to collapse
now, if I upgrade it through the ruu, is that the exact same upgrade that comes from the carrier? As in, even the HTC update too?
And if it is, is the ruu just the rooted phones way of updating?
Thanks
icecursor said:
now, if I upgrade it through the ruu, is that the exact same upgrade that comes from the carrier? As in, even the HTC update too?
And if it is, is the ruu just the rooted phones way of updating?
Thanks
Click to expand...
Click to collapse
Yes it is the same update. Updating with the RUU can be used either way (rooted or non-rooted). Just keep in mind that you'll lose root access after updating.
Theonew said:
Yes.
Click to expand...
Click to collapse
Theonew said:
Yes it is the same update. Updating with the RUU can be used either way (rooted or non-rooted). Just keep in mind that you'll lose root access after updating.
Click to expand...
Click to collapse
ok, so last question,
do I need hboot 1.5? I am currently running revolutionary s-off, HBOOT 1.49.1107.
Originally Posted by Theonew
Yes.
Click to expand...
Click to collapse
Originally Posted by Theonew
Yes it is the same update. Updating with the RUU can be used either way (rooted or non-rooted). Just keep in mind that you'll lose root access after updating.
Click to expand...
Click to collapse
ok, so last question,
do I need hboot 1.5? I am currently running revolutionary s-off, HBOOT 1.49.1107.
Click to expand...
Click to collapse
I'm not sure for your device, but as long as the RUU is for it, it should work (boot loader version doesn't usually affect it).
hello, i wanted to know if RUU also achieves S-ON. I need to return my droid incredible to verizon for replacement due to screen malfunction. I cannot see anything on the display, but everything inside works fine.
I had unlocked bootloader using htcdev and rooted with S-OFF running 4.1.1. I am now on stock Froyo thanks to RUU, but I still need to get S-ON and bootloader locked.
So does the RUU achieve S-ON? I have downloaded the forever SON zip file. But I dont know how to flash it using ADB. Can someone guide me.
haunteddevil619 said:
hello, i wanted to know if RUU also achieves S-ON. I need to return my droid incredible to verizon for replacement due to screen malfunction. I cannot see anything on the display, but everything inside works fine.
I had unlocked bootloader using htcdev and rooted with S-OFF running 4.1.1. I am now on stock Froyo thanks to RUU, but I still need to get S-ON and bootloader locked.
So does the RUU achieve S-ON? I have downloaded the forever SON zip file. But I dont know how to flash it using ADB. Can someone guide me.
Click to expand...
Click to collapse
The RUU does not return S-ON. What is in the zip file?
achieve S-ON on htc...
haunteddevil619 said:
hello, i wanted to know if RUU also achieves S-ON. I need to return my droid incredible to verizon for replacement due to screen malfunction. I cannot see anything on the display, but everything inside works fine.
I had unlocked bootloader using htcdev and rooted with S-OFF running 4.1.1. I am now on stock Froyo thanks to RUU, but I still need to get S-ON and bootloader locked.
So does the RUU achieve S-ON? I have downloaded the forever SON zip file. But I dont know how to flash it using ADB. Can someone guide me.
Click to expand...
Click to collapse
for S-ON try this Post ...
The main question is the title - Should you S-off before or after the OTA?
I have seen people around the forums (via a few searches) say that it is likely a good idea to perform S-off before OTA because we didn't know for sure if the OTA would close the S-off exploit. Now that the OTA is a known quantity, is that still the best route?
My device is:
Stock rom and firmware (2.01.605.11)
Unlocked
AmonRA 3.15 recovery
Rooted
I'm a little nervous about doing S-off, but I figure it will be really handy to have it once its done, and I understand it really is no big deal. My end goal is to run the Venom rom and then move to AOKP/CM9 once they have most of the bugs worked out. Would my best course of action be to S-Off, run the firmware updater, reinstall recovery (probably TWRP, seems like that is the most popular one at the moment), then flash my rom of choice? Will I need to re-root if I switch to a different recovery?
UPDATE:
S-off is done and was no big deal, I got it on my third try. I selected to not install the jb_hboot during the process, since I'm doing RUU next.
The 3.14.605.12 RUU (from android police) was as simple as could be, I renamed the file to PH98IMG.zip and dumped it into my sd card, once I rebooted into the bootloader it was automatic from there
I got stuck on the "flash juopunut Bear hboot" part, I am using Hasoon2000's HTC Rezound ALL-In-One Kit and S-Off Toolkit. I thought I could just flash the hboot from this and be done... I learned that unless you have the jb_hboot (the latest vigor hboot from unlimited.io) installed you can't use ADB commands (which the toolkits use). The solution was very simple. I just renamed the jb_hboot to PH98IMG.zip, rebooted into the bootloader and it was installed.
TWRP v. 2.20 flashed, for some reason my phone doesn't charge while plugged in and booted into this recovery. I guess I need to make sure I have a nice charge if I want to do anything major.
Installed ViperRez rom 1.03, now I'm toying around with it
Originally Posted by AshtonTS
Originally Posted by YTHero
My device is:
Stock rom and firmware (2.01.605.11)
Unlocked
AmonRA 3.15 recovery
Rooted
I want to run a custom (like ViperRez or CM9) ICS rom with the OTA (3.14.605.12) updated firmware.
So my process will be:
S-Off -> flash Hboot/radio/firmware files from 3.14.605.12 -> flash juopunut Bear hboot -> flash TWRP -> Flash ICS rom
Is my plan correct in that I should flash juopunutBear hboot after I flash the Hboot/radio/firmware files from 3.14.605.12? If so why?
Is there anything else that I should do in between these steps that I haven't identified? Am I taking any unnecessary risks by doing it this way?
Click to expand...
Click to collapse
Yeah, flash the RUU, then the JBear hboot, then TWRP/Amon Ra, then a Rom
Click to expand...
Click to collapse
I would do it beforehand. Once you are s-off, you can flash the latest firmware without installing the whole RUU also.
But it limits from getting the actual ota which I love to see
Sent from my ADR6425LVW using xda app-developers app
I would do it before and then after you S-Off run through this PH98IMG RUU. From talks, this is the OTA.
http://forum.xda-developers.com/showthread.php?t=1810931
Then flash the patched 2.25.2525 JB hboot from http://unlimited.io/hboot-downloads/
EDIT:
Alternatively you could S-Off, flash latest radios and patched hboot, then flash a rom of your choosing based on 605.10 or 605.12.
I'm still going to wait to see if we can get s-off on ics before updating today as I don't have the wire to currently do the exploit.
Sent from my ADR6425LVW using xda app-developers app
All I am saying is this. Why wait for the OTA when their are already roms based off 605.10, barely anything changed from it to 605.12. Also, S-Off will stick as long as you make it stick.
why wait for the ota when the ota was leaked?
YTHero said:
The main question is the title - Should you S-off before or after the OTA?
I have seen people around the forums (via a few searches) say that it is likely a good idea to perform S-off before OTA because we didn't know for sure if the OTA would close the S-off exploit. Now that the OTA is a known quantity, is that still the best route?
My device is:
Stock rom and firmware (2.01.605.11)
Unlocked
AmonRA 3.15 recovery
Rooted
I'm a little nervous about doing S-off, but I figure it will be really handy to have it once its done, and I understand it really is no big deal. My end goal is to run the Venom rom and then move to AOKP/CM9 once they have most of the bugs worked out. Would my best course of action be to S-Off, run the firmware updater, reinstall recovery (probably TWRP, seems like that is the most popular one at the moment), then flash my rom of choice? Will I need to re-root if I switch to a different recovery?
Click to expand...
Click to collapse
You are on Gingerbread firmware, that's the first thing to recognize. There's lots of development tools that were designed AFTER the Gingerbread firmware (2.xx is GB; 3.xx is ICS). In fact Amon Ra 3.15 was the version done after the ICS leak (because mount points were changed).
So you can (and probably should) do the S-OFF using the GB version over at Juopunut's site and then either wait for the ICS OTA to come to your phone or flash it in bootloader as a PH98IMG.ZIP (the RUU is available via Android Police, 3.14.605.12 is the "official" ICS, and I'm pretty sure its here on XDA but I don't remember the thread.)
If you don't want to wait for the OTA, it doesn't matter whether you are S-ON or S-OFF, you'll still have to flash the RUU in hboot. Both will completely wipe your phone, and the S-OFF process will wipe your CARD so use a different card before you do it!
Finally, to reiterate what's all over by now: the "official" update, 3.14.605.12 is only marginally different than the unofficial leak that's been out since May, 3.14.605.10, and the radios, kernel and hboot are all the same.
hgoldner said:
So you can (and probably should) do the S-OFF using the GB version over at Juopunut's site and then either wait for the ICS OTA to come to your phone or flash it in bootloader as a PH98IMG.ZIP (the RUU is available via Android Police, 3.14.605.12 is the "official" ICS, and I'm pretty sure its here on XDA but I don't remember the thread.)
If you don't want to wait for the OTA, it doesn't matter whether you are S-ON or S-OFF, you'll still have to flash the RUU in hboot. Both will completely wipe your phone, and the S-OFF process will wipe your CARD so use a different card before you do it!
Click to expand...
Click to collapse
I recieved the OTA today from Verizon, but deferred to take until I figured out what I want to do. If I understand what you are saying:
S-Off -> OTA -> install TWRP -> then Flash ViperRez or whatever rom
Taking the OTA seems like the easiest and most straight forward way of upgrading to ICS radios/hboot. Will I need to do anything else before or following the OTA? I feel like somewhere I read that I will need to patch the hboot because I will be S-off.
YTHero said:
I recieved the OTA today from Verizon, but deferred to take until I figured out what I want to do. If I understand what you are saying:
S-Off -> OTA -> install TWRP -> then Flash ViperRez or whatever rom
Taking the OTA seems like the easiest and most straight forward way of upgrading to ICS radios/hboot. Will I need to do anything else before or following the OTA? I feel like somewhere I read that I will need to patch the hboot because I will be S-off.
Click to expand...
Click to collapse
After you s off, flash juopunutBears hboot it should be on his website
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
After you s off, flash juopunutBears hboot it should be on his website
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I'm trying to understand this post
http://forum.xda-developers.com/showpost.php?p=29715514&postcount=51
and this thread
http://forum.xda-developers.com/showthread.php?t=1614366
superchilpil said:
New firmware patch huh?
This is simply for those upgrading to ICS firmware on a GB rom Or and ICS rom that had the gingerbread patch flashed over it
Whats the difference between the stock Hboots and the JB/ENG Hboots?
Simply, These Hboots have fastboot commands enabled WITHOUT unlocking the bootloader
I suggest if you use fastboot alot to use these hboots
Click to expand...
Click to collapse
I'm just trying to figure out if I will have to reflash the juopunutBears hboot after I flash the Hboot/radio/firmware files from 3.14.605.12
So will it be:
S-Off -> Hboot/radio/firmware files from 3.14.605.12 -> juopunut Bear hboot ->install TWRP -> then Flash ViperRez or whatever ICS rom
YTHero said:
So will it be:
S-Off -> Hboot/radio/firmware files from 3.14.605.12 -> juopunut Bear hboot ->install TWRP -> then Flash ViperRez or whatever ICS rom
Click to expand...
Click to collapse
You got it right on.
Sent from my ADR6425LVW using xda app-developers app
This is going to be a short and simple guide for S-OFF users that want to update to the current RUU level or refresh their phone because they are having issues like being unable to boot certain ROM's. You will not lose S-OFF by flashing the RUU.
1. Do a nandroid backup of your current ROM if you want to restore it later.
2. Download the current version of the RUU for your phone in exe or zip format from this page.
3. Run the exe version of the RUU in Windows or the zip version as a PG86IMG.zip file through the bootloader. If using the bootloader method make sure the file is named exactly "PG86IMG.zip" and placed in the root of your SD card before starting the bootloader.
There is no need to unlock the bootloader before running it if you are S-OFF and there is troubleshooting information in this post if you have problems. It may be necessary to run the RUU twice if you have a custom bootloader installed when it is run the first time. If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
I recommend downloading and installing the OTA(s) immediately after flashing the RUU to get the most current firmware while still 100% stock, but the OTA firmware update(s) can be downloaded as a separate PG86IMG.zip file if you forget or can't do that for some reason.
4. Flash a custom hboot using the instructions in this post. My recommendation for a good general purpose hboot is the JBear GB 1.50.5050 version unless you are running an ICS Sense ROM like stock or Cool ICS that requires an ICS bootloader (1.57.xxxx or 1.58.xxxx).
5. Connect your phone to a PC and start the bootloader in "fastboot USB " mode, then issue the following command to flash your favorite recovery:
fastboot flash recovery recovery.img (where "recovery.img" is the name of the recovery file in your ADB/fastboot directory)
6. Boot into recovery and restore a nandroid or flash another custom ROM. You may have to wipe cache+dalvik and restart recovery if you get any error messages from the recovery program.
That's it. You're now updated or re-synced with the current firmware, the hboot that meets your requirements and your favorite recovery.
Here are some additional links that might be helpful:
4EXT Recovery OP for the Evo 3D CDMA thread with a direct link to recovery.img in the download section (not the most current version)
Current TeamWin (TWRP2) touch recovery for the CDMA Evo 3d.
Virgin Mobile OTA firmware only in PG86IMG.zip format.
Sprint OTA firmware only in PG86IMG.zip format.
ramjet73
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
3volution said:
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
Click to expand...
Click to collapse
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
3volution said:
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
Click to expand...
Click to collapse
You're welcome.
It's not really that difficult if you are familiar with rooting and flashing HTC devices but I can understand how it might be for users coming from other brands. Samsung in particular is definitely less complicated.
ramjet73
Thanks!
Thanks for this great post ramjet. Really a great concise How-to.
Nevermind, fixed.
ramjet73 said:
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
Click to expand...
Click to collapse
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
I also tried updating via the bootloader method as well..... runs well....updates like four of the ten check offs and then bootloops as well.
Edit: turns out I was flashing the wrong version, oops
Hedied4me said:
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
Click to expand...
Click to collapse
From experience I've discovered that the RUU.exe utility will sometimes stop after flashing the stock bootloader if it is run with a custom hboot installed, which is why I put this comment in the OP:
If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
Click to expand...
Click to collapse
I've had no problem completing the RUU.exe flash if I just cancel the utility in the Windows task manager and restart it.
Others have reported that re-flashing the RUU.zip file through the bootloader also works if the original flash is incomplete.
Also, make sure that you downgrade your hboot after flashing the RUU since the stock hboot won't boot GB or AOSP based ROM's.
ramjet73
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Sent from my HTCEVOV4G using Tapatalk 2
Hedied4me said:
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Click to expand...
Click to collapse
Try removing/replacing the battery and then use the Power+VolumeDown buttons together to enter the bootloader.
The stock ROM has the "fast boot" option turned on in the power settings by default and that will interfere if you try to enter the bootloader after powering down from the stock ROM.
ramjet73
Thank you very much for your patience and help Ramjet. Everything went well.
Sent from my Evo V 4G using Tapatalk 2
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
El Queson said:
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
Click to expand...
Click to collapse
I honestly don't know.
There is a post by a cricket user in my rooting and S-OFF guide that says the customization is not lost for that carrier but I've never used Boost and can't speak to that.
Perhaps another Boost user on these forums has experience with flashing the RUU.
ramjet73
++sorry++
Using the bootloader procedure is, by far, the easiest way of doing the RUU process that I've encountered. From custom ROM, to stock, back to a custom ROM in less than 45 minutes.
ramjet, thank you for your contributions to our platform.
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
GAPO said:
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
Click to expand...
Click to collapse
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
ramjet73 said:
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
Click to expand...
Click to collapse
Yes she is S-off. She also already has 4ext recovery installed.
Does this negate my need to flash recovery in the downloader?
Since she is S-off, this should be pretty easy.
I will still need to access the bootloader via Windows cmd, yes? Or can I accomplish all of this using only the handset?
Sent from my PG86100 using xda premium
---------- Post added at 07:07 PM ---------- Previous post was at 06:52 PM ----------
Her hboot is:
SHOOTER XC SHIP S-OFF RL
HBOOT-1.40.0000
RADIO-0.97.10.0530
eMMC-boot
Jun 8 2011, 17:20:22
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Sent from my PG86100 using xda premium
GAPO said:
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Click to expand...
Click to collapse
That's a stock hboot so you should be fine. You can still update using the RUU if a custom hboot is installed, but it might take a restart to complete after the stock hboot is installed.
ramjet73
I tried searching for this answer before I posted this but I was not successful at finding it. So.....
Is there anything that cannot be updated by the ROMs? Are there items that can only be updated by taking the latest OTA update? I am trying to figure out if I need to take this latest update to get the latest firmware, kernel, etc.
I am OK with waiting for the ROM updates to come out if they will update everything, too. If they can't, I might as well get these OTA updates to see if they fix some of my problems.
Thanks for the help.
badtlc said:
I tried searching for this answer before I posted this but I was not successful at finding it. So.....
Is there anything that cannot be updated by the ROMs? Are there items that can only be updated by taking the latest OTA update? I am trying to figure out if I need to take this latest update to get the latest firmware, kernel, etc.
I am OK with waiting for the ROM updates to come out if they will update everything, too. If they can't, I might as well get these OTA updates to see if they fix some of my problems.
Thanks for the help.
Click to expand...
Click to collapse
Yes there are a lot of files that cant be updated with roms. The only way to get all of the new firmware is to run the ruu. Turge has figured out how to flash radios now without flashing the ruu so thats good. But thats not everything. I'd wait to run the ruu until the devs change their rom base to the new update. Otherwise no custom rom yet. You can root the stock update after installing, just not many goodies atm.
Thank you very much for your help.
When you say the only way to get the new firmware is to run the new RUU, does that mean running the RUU from at&t or one of the modified RUUs posted on here?
If it is the At&t one, the only way to get it to fully update is by going back to the stock 1.15 ROM, correct?
Yep I ran ruu and got it running stock but my 2nd x+ still running old one wit elegancia till roms get updated I don't mind unrooting updating and rooting takes 30 min tops just patiently waiting for a update hell if viper gets updated first ill rock that
Sent from my HTC One X+ using XDA Premium HD app
badtlc said:
Thank you very much for your help.
When you say the only way to get the new firmware is to run the new RUU, does that mean running the RUU from at&t or one of the modified RUUs posted on here?
If it is the At&t one, the only way to get it to fully update is by going back to the stock 1.15 ROM, correct?
Click to expand...
Click to collapse
The latest ruu for ATT to get the newest firmware is 1.19.502.1 http://dl3.htc.com/application/RUU_E...178_signed.exe
nugzo said:
The latest ruu for ATT to get the newest firmware is 1.19.502.1 http://dl3.htc.com/application/RUU_E...178_signed.exe
Click to expand...
Click to collapse
Correct, but I wasn't sure if you could update directly to that RUU from a custom ROM and get all the updates like hboot, firmware and radio. I was wondering if I needed to go from a custom ROM back to stock 1.15 and THEN do this 1.19 update to get everything updated properly.
If you update your phone to the latest RUU, you won't be able to installed a custom ROM until the devs update their ROM. You update, you stay stock for a moment. You still can ROOT the stock ROM.
badtlc said:
If it is the At&t one, the only way to get it to fully update is by going back to the stock 1.15 ROM, correct?
Click to expand...
Click to collapse
Not exactly. You can upgrade with a RUU if your actual version is equal or lower. You can't downgrade your version unless your phone is S-OFF.
To flash the RUU
Reboot in fastboot mode
type at the prompt >fastboot oem lock
Rebooting
Keep your phone in FASTBOOT USB mode
Run the RUU installer on your computer.
This will FULLY WIPE the phone.
[QUOTE"badtlc"]If it is the At&t one, the only way to get it to fully update is by going back to the stock 1.15 ROM, correct?[/QUOTE]
Not exactly. You can upgrade with a RUU if your actual version is equal or lower. You can't downgrade your version unless your phone is S-OFF.
To flash the RUU
Reboot in fastboot mode
type at the prompt >fastboot oem lock
Rebooting
Keep your phone in FASTBOOT USB mode
Run the RUU installer on your computer.
This will FULLY WIPE the phone.[/QUOTE]
Doing this method, one could use the latest 1.19 directly from HTC and get everything updated? No need to do this method, install the older 1.15, and then do the 1.19 RUU update?
badtlc said:
If it is the At&t one, the only way to get it to fully update is by going back to the stock 1.15 ROM, correct?
Not exactly. You can upgrade with a RUU if your actual version is equal or lower. You can't downgrade your version unless your phone is S-OFF.
To flash the RUU
Reboot in fastboot mode
type at the prompt >fastboot oem lock
Rebooting
Keep your phone in FASTBOOT USB mode
Run the RUU installer on your computer.
This will FULLY WIPE the phone.
Doing this method, one could use the latest 1.19 directly from HTC and get everything updated? No need to do this method, install the older 1.15, and then do the 1.19 RUU update?
Click to expand...
Click to collapse
You can do one of two things to get the full update. One is to go back to a 1.15 stock ROM, flash the stock recovery and run the OTA. The other is to run the latest RUU from HTC (the one from the link posted above) after you've flashed the stock recovery and re-locked the bootloader (otherwise the RUU might not proceed). Bare in mind that running the RUU will wipe your phone to factory settings.
I started a thread here http://forum.xda-developers.com/showthread.php?t=2245955 about people's experiences updating and post-update. Once you decide to update feel free to share your experience there!
I have already updated. I went from elegancia. I locked the bootloader, rebooted to fastboot, and then ran the 1.15 stock RUU. After that, I ran the 1.19 update I downloaded from HTC. I was just trying to figure out if I would have went straight from elegancia to 1.19 if everything including radio, kernel, etc. would have updated properly since elegancia was on the phone and not stock version 1.15. I don't know what these RUUs look at before applying their updates.
Hey,
Doing some work on a friends device. He brought it in said that he bought the device a while ago and it was custom and wanted to simply return to stock so he could update to the newest firmware. Normally I can search and find the answers I need but Im stumped at the moment.
So when he brought it to me, the system was in this state:
Bootloader - UNLOCKED
S-ON
HBOOT - 1.44
Recovery - CWM
ROM - CleanRom1.0
Android Version 4.2
So I figured I would relock the bootloader and run an RUU to bring him back to stock. I used "RUU_M7_UL_JB_50_Cingular" to bring him back to stock. It actually brought the device back to 4.1.2 which is what I believe it was on when it was rooted and customized in the first place. Anyhow, I popped my ATT card in there and hit software update and it downloaded it, restarted, and when it came back up, its still on 4.1.2?? And the software update and ATT software update section both say the device is up to date.
Then I downloaded the latest stock RUU which is - "RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2"
Ran that and it tells gives me and error saying that I should download the correct image file.
So my question to you is, do I need to unlock the bootloader again and gain S-OFF to run this RUU properly? I was under the impression that once the device was back to stock, I could update it again. My goal here is to get this phone on KitKat for him.
Current System State -
Bootloader - RELOCKED
S-ON
HBOOT - 1.44
Recovery - STOCK? Just get a phone with a red triangle with an ! in the middle.
ROM - Stock
Android Version - 4.1.2
Thanks in advance.
I would recommend trying to S-OFF the device first, before updating anything. The current S-OFF tools may not work after the latest updates. Try Firewater w/ the temproot method first. Once you get S-OFF you have more options to update.
I've seen a few posts lately where the latest AT&T 4.4 RUU isn't working for some people (see this thread: http://forum.xda-developers.com/showthread.php?t=2723785). I'm planning on trying it this weekend. If it doesn't work for me, my plan is to run the 4.3 RUU from here then install the OTA, either through "Software Updates" on the phone or install it manually.
sharksfan7 said:
I would recommend trying to S-OFF the device first, before updating anything. The current S-OFF tools may not work after the latest updates. Try Firewater w/ the temproot method first. Once you get S-OFF you have more options to update.
I've seen a few posts lately where the latest AT&T 4.4 RUU isn't working for some people (see this thread: http://forum.xda-developers.com/showthread.php?t=2723785). I'm planning on trying it this weekend. If it doesn't work for me, my plan is to run the 4.3 RUU from here then install the OTA, either through "Software Updates" on the phone or install it manually.
Click to expand...
Click to collapse
Yeah, I just downloaded the 4.3 update to give that a try...
My HBOOT version is 1.44 so technically, gaining S-OFF should be really easy with the HTC One Toolkit no?
digisolnc said:
Yeah, I just downloaded the 4.3 update to give that a try...
My HBOOT version is 1.44 so technically, gaining S-OFF should be really easy with the HTC One Toolkit no?
Click to expand...
Click to collapse
I would think so. I never looked at HTC One Toolkit, though so don't know what it's all about. When I was researching S-OFF, Rumrunner then Firewater were the goto tools to S-OFF. Personally, I prefer not to use toolkits. Just rather figure out the commands to run myself. But if they work for you, go for it.
digisolnc said:
Yeah, I just downloaded the 4.3 update to give that a try...
My HBOOT version is 1.44 so technically, gaining S-OFF should be really easy with the HTC One Toolkit no?
Click to expand...
Click to collapse
I was able to gain S-OFF using revone with the 1.44 version of HBOOT. Detailed instructions http://forum.xda-developers.com/showthread.php?t=2497712
sharksfan7 said:
I would think so. I never looked at HTC One Toolkit, though so don't know what it's all about. When I was researching S-OFF, Rumrunner then Firewater were the goto tools to S-OFF. Personally, I prefer not to use toolkits. Just rather figure out the commands to run myself. But if they work for you, go for it.
Click to expand...
Click to collapse
the android 4.3 ruu followed by the OTA update is the easy way to AT&T 4.4.2
http://dl3.htc.com/application/RUU_...13_10.38j.1157.04_release_334235_signed_2.exe
and the OTA is here if you want to flash it manually
http://www.androidfilehost.com/?fid=23329332407573841