Hi Friends
Recently i try to load jellybread rom for my samsung galaxy ace s5830i. previously i suing jellyblast rom, i followed the procedure what mentioned in the forum. now my phone stops in the logo itself. i try back again jelly blast still same. also tried odin but my usb not detected in system. kindly give me sollution. i am now phoneless.
vinoth
vinodlion20 said:
Hi Friends
Recently i try to load jellybread rom for my samsung galaxy ace s5830i. previously i suing jellyblast rom, i followed the procedure what mentioned in the forum. now my phone stops in the logo itself. i try back again jelly blast still same. also tried odin but my usb not detected in system. kindly give me sollution. i am now phoneless.
vinoth
Click to expand...
Click to collapse
Questions and problems go to Q&A section!
Sent from my Ace-i using Tapatalk 2
Hit ThanX if I helped, it won't hurt, maybe...
Hello,
You must download stock ROM (multifiles), and .pit file.
You must select the .pit file, the stock ROM files, and flash it. (Everything via Odin)
Are you sure you have the latest samsung drivers for your phone? if not download it from the internet.
And then follow the below steps:
Go to download mode(vol up & down + power buttons)
wait for sometime ,you will come to a warning screen on your phone,press the vol up button,wait again
now check on odin on your computer,odin should have communication with your phone.
And you should have necessary files to unbrick ,if not do the following:
Download the latest firmware>use splitfus to obtain the PDA,CSC and MODEM/PHONE files
you will also need bootloader file and .pit file
Use odin to unbrick.
Easy when done right
Related
Hello
i am very new to this forum and might not be posting this at right place.
i have got samsung galaxy S2 (UK) and wondering an easy guide on how to root my phone please? I dont want to know which one is the latest/best.
i am running on android 4.0.4, my baseband version is I9100XXLQ6 and kernel version is [email protected]#3
can you please help me on how can i root my phone to jelly bean?
i apologise if this has already been answered
thanks
harry
You are on the right adress.
If you follow these steps you can root your phone in 5-10 minutes.
1. Turn on your phone, connect it to your pc and install the drivers of your phone (so your phone can connect to your pc)
2. Turn of your phone and remove the usb cable
3. Hold the volume down button, power button and home button for like 10 seconds so your phone go to download mode, press volume up so your phone go further
4. Put the usb cable in your phone and connect it to your pc.
5. Open Odin (download link after tutorial)
If your phone is connected correctly you get a yellow bar with COM: (then a random number)
6. Press ''PDA'' and select the .TAR file (download link after tutorial)
Be sure its a .TAR file, otherwise your phone will brick
7. Press ''START'' your phone will root now, after the root it will reboot automaticly, check if you have this apps: CWM and SuperSU.
Download link Odin:
http://db.tt/fqvwktih (unzip it and copy ALL the files to one folder)
Download link root file:
http://db.tt/kbEY1fEZ (this is the .TAR file)
If you need further help just DM me.
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
---------- Post added at 04:22 PM ---------- Previous post was at 04:10 PM ----------
Which JB ROM you want?
Im running RainBox ROM v8.1, i recommend this one, its very stable and very fast.
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
or.....look for the cmw.zip and su-busybox-installer.zip. root via sd card; painless.
they are here somewhere, along with tutorials & stuff.
and i think he's looking for JB leak, not custom ROM.
from sii xda-ded
If he follow my tutorial i can help him flashing leaked ROM, i rooted 4 S2's on this way dude, i know what im doing.
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
i know you know. the thing is that for some people the words "odin", "plug to pc", "may brick", "download mode" are creepy as hell.
u gotta try to lay out all options available for him.
wouldn't you agree?
from sii xda-ded
Before I discovered this great forum I logged onto this guys site which gives/ links to youtube videos on how to do root your phone, literally follow him step by step
galaxys2root . com
obviously this site will be your best resource for getting the roms after you root although your in the UK not sure if the roms work over there?
always youtube what you wanna do with your phone. you always have xda to back em up ....or not.
from sii xda-ded
Thats a great site, but what i said, i rooted 4 S2's on this way so it work!
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
I am personally still using clockworkmod + Darksidewipe as its what I started with and appears hard to brick your phone with this method although I have personally not tried other methods
lol i first rooted with DoomLord oneclick in GB (which was crazy-to-experience), updated to ICS and went with CMW.zip & SU-Busybox-Installer.zip thru recovery. Then i bought mobile odin pro and i dont have to worry about rooting anymore in my sii life.
Hi everyone.
i own a international samsung s3 gt-i9300T
i noticed it behaving strangly as apps where locking up and then it would restart in the middle of web surfing etc
last night i restarted it and now it has frozen in ODIN MODE and states DOWNLOADING-DO NOT TURN OFF TARGET...
Its been on this page for hrs..
i have a custom Hyperlight rom installed.
Any suggestions would be greatly appreciated.
thankyou.
john
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
it's already in download. read the instructions on installing a stock rom
Oomahey said:
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hi
srry fr the late reply but it freezes on the samsung galaxy s 3 gt i9300t screenafter it reboots
im totally lost im about to dump the phone in the garbage and get another one tomorro
ive also tried using odin again but it just stalls for hrs when trying to reinstal flash another rom
thnx heaps for ur advise
Glebun said:
it's already in download. read the instructions on installing a stock rom
Click to expand...
Click to collapse
thnks buddy but when i hold the power button it does what i explained in the above reply when i hold power vol down and home the warning screen comes up informing me that a custom rom can cause critical problems etc so when i press down to cancel it goes back to the previously mentioned screen but when i press up to install rom it goes into odin mode with the android robot with
product name blank (previosly it stated gt i9300t)
custom binary download no (previously stated4)
current binary samsung official (said something different before)
system settings custom
i swear this is doing my head in :0
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
JJEgan said:
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
Click to expand...
Click to collapse
hi im using the latest odin file odin3 v1.85 and is this the right firmware file to use as i used this to root my s3 CF Root-SGS3-v6.4.tar
when i do it it says
<ID:0/005> "cant open the serial (com) port.
<OSM> All threads completed (succeeded 0/ failed 1)
if the product name is empty in download, then it's time to get a new phone. it's SDS
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
thanks matey
so in other words my phone is bricked :0
by the way what does sds stand for ???
anyway thnx again
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
hi again
i tried it again and now it says there is no pit partition ???
who wants a samsung s3 brick b4 it goes into the trash ???
antway thnx buddy this rooting is not fr me :0
Put it on ebay just say what the problem is .
Someone who reads your post will come to the conclusion its just a user who has not followed the instructions annd may think its worth a cheap buy .
Odin is not firmware CF Root is not firmware .
jje
Make sure that uve downloaded the correct CF-Root file (for i9300T and NOT i9300)... I think its nothing to do with SDS... Anyway try the following link and download the package again...
http://www.androidegis.com/how-to/how-to-root-galaxy-s3-i9300t-with-cf-root-tool/
Hope it works....
Sent from my GT-I9300 (Hassan Khalid Malik) using xda premium
Hello all
First of all i did rooting on my phone and this is not the problem . then i installed pac-man kitkat 4.4.2 rom on my phone . i erased the old operating system and didn't do a backup . now i am unhappy with this kitkat and want my phone bk like originally . this kitkat doesn't applying any of the sensors on phone . its like a lot of options just gone . and now am searching for the original rom to install and cant find :crying: :crying: :crying: plz tell me what to do . my phone is galaxy S4 gt-i9500
turkman97 said:
Hello all
First of all i did rooting on my phone and this is not the problem . then i installed pac-man kitkat 4.4.2 rom on my phone . i erased the old operating system and didn't do a backup . now i am unhappy with this kitkat and want my phone bk like originally . this kitkat doesn't applying any of the sensors on phone . its like a lot of options just gone . and now am searching for the original rom to install and cant find :crying: :crying: :crying: plz tell me what to do . my phone is galaxy S4 gt-i9500
Click to expand...
Click to collapse
You can download the latest firmware for your Galaxy S4 (GT-I9500) from here, just make sure to change the country box to the country that is correct for your service provider. Once you have downloaded the firmware image you can use Odin and download mode on your phone to flash the firmware. To put your phone into download mode power off the device, then turn on the device holding the volume down button + home button + power button simultaneously, follow the onscreen prompts to put the phone in download mode. You will need Odin to flash the firmware to your device which can be obtained from here. I would recommend watching this tutorial video on how to flash the firmware to your device using Odin (Also make sure you have the USB drivers for your phone installed correctly on your computer or Odin won't recognize your device). Let me know if you still have questions I'll be happy to help you out.
shimp208 said:
You can download the latest firmware for your Galaxy S4 (GT-I9500) from here, just make sure to change the country box to the country that is correct for your service provider. Once you have downloaded the firmware image you can use Odin and download mode on your phone to flash the firmware. To put your phone into download mode power off the device, then turn on the device holding the volume down button + home button + power button simultaneously, follow the onscreen prompts to put the phone in download mode. You will need Odin to flash the firmware to your device which can be obtained from here. I would recommend watching this tutorial video on how to flash the firmware to your device using Odin (Also make sure you have the USB drivers for your phone installed correctly on your computer or Odin won't recognize your device). Let me know if you still have questions I'll be happy to help you out.
Click to expand...
Click to collapse
thank u for the quick replay and for this website ill follow your instructions and tell you what happened with me
am sorry but i cant find my correct country/provider at all so wt will happen if i download another firmware with another country ???
turkman97 said:
am sorry but i cant find my correct country/provider at all so wt will happen if i download another firmware with another country ???
Click to expand...
Click to collapse
Which country/provider are you looking for? I would suggest taking a look at this article, additionally I would take a look at this thread for instructions on what to do in your case. If you still have questions please let me know.
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
xdanewbie2014 said:
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Click to expand...
Click to collapse
As long as you can access download mode you should be able to get the device working again. I'd try heimdall (get suite 1.3 I believe) instead of Odin. It usually works better. You just need to find the Odin stock package for your device.
Sent from my YP-G1 using XDA Free mobile app
xdanewbie2014 said:
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
Click to expand...
Click to collapse
No you didn't break your device forever. All you have to do is install your stock rim that suites your device and flash it with hemidall
Sent from my YP-G70 using XDA Free mobile app
Hi
I have found all the files I need here
http://forum.xda-developers.com/showthread.php?t=1531850
BUT I cant get the device into download mode. I start the device with Powe+vold down+home key and it asks me to press vol up to continue. However, when I press vol up I get the "firmware upgrade encountered an issue" error.
Boy am i learning now
Thanks - xdanewbie
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
xdanewbie2014 said:
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Is This Progress ?
obscuresword said:
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Click to expand...
Click to collapse
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
Did you try getting the 4.2 drivers from Samsung Kies and then using zadig? Also it seems like you're using an S2 restore, which isn't for your device. The comment I linked you to is for restoring a YP-G1 so you would have to get the right heimdall package for your 4.2 like zaclimon said.
Sent from my YP-G1 using XDA Free mobile app
zaclimon said:
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
xdanewbie2014 said:
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
Click to expand...
Click to collapse
I think you are going to have to use Heimdall for this. Try and get the drivers installed for this device, and see if zadig picks it up.
Day 4
Hi
OK. It appears that I can either setup my PC to Use Heimdall (which requres the samsung KIES drivers NOT to be installed) or Odin (which requires the drivers to be installed)
I have now deinstalled the kies usb drivers, run drivecleanup to remove the old usb entries and downloaded Heimdall 1.3.1. When I run zdiag it picks up the samsung usb driver and install the heimdall driver.
Im trying now to use the rootted rom available (which seems ok for odin) available at
http://forum.xda-developers.com/showthread.php?t=1884071
However, if I try to use it with Heimdall 1.3.1 it says missing firmware.xml
I have a friends galaxy 4.2 also. Is there any way to extract the required info from that device or can anyone give pointers to where i might find a heimdall package for the YP-GI1CWXEU
Thanks - xdanewbie
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
drakonizer said:
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
Click to expand...
Click to collapse
Hi
Thanks for your help. I have the rom from the link above but where would i get the pit file from ?
Thanks - xdanewbie
Update: I found the PIT file for the international 4.2 version. I used odin 3.04 with the pit file followed by the rom and my device its now working again Is there any way now to get rid of the Salaxy S2 logo ?
Either way, many thanks to all who helped and I hope this thread helps those who were as silly as I was !
Thanks - xdanewbie
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
drakonizer said:
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
Click to expand...
Click to collapse
Hi I used this usb jig which not nly removed the yellow triangle but thegalaxy S2 logo as well. My player now looks exactly like it did before.
http://www.ebay.co.uk/itm/Micro-USB...UK_Mobiles_Accessories_RL&hash=item4ab688d076
PS: For those who may be interested, 4.2 case seem very expensive. I purchased this (whch is for a galaxy S2) and its a perfect fit but you need to
extended the button holes with a dremel.
http://www.ebay.co.uk/itm/Luxury-Ge...lePhonesCasesPouches&var=&hash=item48626b4b8c
Many thanks to all those who have helped a newbie learn a little bit more.
xdanewbie
Hi, i own samsung galaxy ace 4 device (sm-g313hu/ds), i've tried lawza methods but no one helped.
so, can any1 help me rooting this device?
bump
Flash this file and then try kingo root...
G313HUXXU0ANGK_ROOT.tar.zipG313HUXXU0ANGK_ROOT.tar
Search for the file on google and download THIS FILE ONLY!!!! Flash this file(after extracting) via odin.
Steps to flash via odin:- Check on Auto reboot and F. Reset Time.->Then browse for the file on AP or PDA in older versions->Enable USB debugging and put the phone in DL mode odin recognizes it and then click start.->When the phone reboots, unplug it...
After that, install kingo root on PC and then it will get rooted for sure... I'm giving SS...
RealNigga said:
G313HUXXU0ANGK_ROOT.tar.zipG313HUXXU0ANGK_ROOT.tar
Search for the file on google and download THIS FILE ONLY!!!! Flash this file(after extracting) via odin.
Steps to flash via odin:- Check on Auto reboot and F. Reset Time.->Then browse for the file on AP or PDA in older versions->Enable USB debugging and put the phone in DL mode odin recognizes it and then click start.->When the phone reboots, unplug it...
After that, install kingo root on PC and then it will get rooted for sure... I'm giving SS...
Click to expand...
Click to collapse
can you join in this facebook group? Samsung galaxy ace 4 duos sm-g313hu/ds... we need someone like you here. please
eivon1285 said:
can you join in this facebook group? Samsung galaxy ace 4 duos sm-g313hu/ds... we need someone like you here. please
Click to expand...
Click to collapse
I could, but recently I lost my phone, so I'll be of no use... And I aint gonna buy that phone again... So... But I will...
Help
I have rooted my phone G313H/ds with this method and after that can´t open the camera. Camera error, i tried wipe cache partition, erasing app data of the camera, and installing other camera apps, nothing of this work. Sorry for my poor english and thanxs for the comunity to assist all of us....