Hy,
I have a big problem
I have installed on my galaxy tab 2 10.1 GT-P5100 install fonts app and after I changed all the fonts.
After that I got a message on start.
Firmware Upgrade encountered an issue. Please select recovery mode in kies & try again.
I have tried connect to kies and emergency firmware recovery but i haven't got recovery code.
and I have tried firmware upgrade and initialisation but in installationI I get a chinese notice with a OK button, if I click OK, this close the kies windows and nothing happen.
I can not switch download mode and nothing. and I can not turn off the tab..
thank for answers.
have a nice day.
Related
I tried to root my T Mobile Galaxy S2 using Odin method, and now i'm getting nothing but a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I would happily follow those directions, but now Kies won't recognize my device?!?!? I also can not get back into download mode. I have no idea what to do. Is there anyone out there that can help?
and why would you flash a t-mobile device with i9100 rom????
obvious mistake
now get a JIG and pray...
@tulip: download mode should work... just press the keys a little longer...
try to flash back your old firmeware + kernel... had the same problem yesterday but it worked. afterwards you can do a cwm back-up
I tried to update my I9100 simply by checking for updates on phone. Everything was going fine but when i downloaded OS and it said that it will reboot now, it had frozen during rebooting. Now I can't enter recovery mode but download mode works proper. When I turn on It's just black screen of death and "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" However Kies doesn't connect with it. It says that It has connection issues. I have rooted S2 with 4.1.1 OS and jeboo kernel 1.2.
bambo95 said:
I tried to update my I9100 simply by checking for updates on phone. Everything was going fine but when i downloaded OS and it said that it will reboot now, it had frozen during rebooting. Now I can't enter recovery mode but download mode works proper. When I turn on It's just black screen of death and "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" However Kies doesn't connect with it. It says that It has connection issues. I have rooted S2 with 4.1.1 OS and jeboo kernel 1.2.
Click to expand...
Click to collapse
Make sure you have correct drivers installed and usb debugging option is on, after widows loads all drivers when phone is connected disconnect phone using safely discoonect device and do a reboot and then after restart try again, also check your firewall and antivirus is not blocking the connection to phone.
Flash stock and go back to custom.
And please stop trying to update your device thru kies while you're actually on custom. Those two don't get along to well.
Sent from the little guy
Apologies if this post is inappropriate for the forum, if so could I be directed to the correct place?
I recently flashed the latest CyanogenMod to my Samsung Galaxy S2 (GT-I9100). However, after some tinkering I managed to make it unable to access the internet via WiFi or Mobile Data.
Unable to fix this after asking online I figured I'd just flash a stock ROM, and go back to square 1.
In flashing, something ****ed up. I did everything right AFAIK but mid flash the phone went to the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." screen.
The device will now only boot to this screen, and I cannot access recovery mode.
I went immediately to Kies, plugged in my phone, intending to use the firmware recovery tool, however Kies does not recognise the phone. I went through the troubleshooting procedure, redownloaded the drivers (multiple times) and still no joy. I even uninstalled Kies and reinstalled. Following that, it now gives a "Device is not responding" error message.
I can't do a firmware recovery, I can't flash a new ROM until I can enter recovery mode, and I can't turn my phone on.
I hesitate to ask but... am I bricked?
Wat do?
Thanks in advance for any help.
Hi everybody.
I was upgrading my Tab 2 10.1 firmware using Odin but the software crashed. Now I can only see a screen where my tab says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
I tried to access to Download or Recovery mode using keys combination: the tab reboots but I can't access to download or recovery mode, I just see the same screen.
I tried to connect the tab to my PC and use ODIN or Kies, but it connects and disconnect all the time.
Any help?
Tab 2 forum is here: http://forum.xda-developers.com/galaxy-tab-2/help
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
zolog said:
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
Click to expand...
Click to collapse
Hello. As far as I know, if you do not have OEM Unlocking enabled, you cannot flash anything through ODIN.
However, you should be able to flash stuff in the green screen you are in.
Download the *proper* stock firmware from sammobile.
By proper, I mean, if your tab has no sim then download for T820
and if it does Download for T825. Then download with the proper CSC code. (it is basically the region you bought the tab from. Look it up).
Download and flash with ODIN 3.14. You can flash stock roms from the Error screen you're in. Also be sure that you're flashing everything properly and have the proper drivers by following everything here: https://android.gadgethacks.com/how-to/use-odin-flash-samsung-galaxy-stock-firmware-0182037/
press the thanks button on the bottom right of my post if i helped. Means a lot