hi all,
so my girlfriend got this note 3 live demo unit from their samsung representative, and i want to show her what a haxxxor i am, and flashed the stock firmware on it. odin flashed in a breeze without complains but the device reboots every 2 minutes.
unfortunatly i dont have backed up (a real geek dont need these) the live demo firmware, so i want to ask if somebody have a backup available, or can make a dump of a unit.
i need the live demo firmware not the stock software.
regards
chris
i also have note 3 live demo unit .........and i created nandroid backup of it ......but it is for 2.41gb .....and my network is not strong so i faild to upload this much amount of data......if u from india and give me ur address than i will send u the cd of firware.....
+1
i need the live demo firmware too. It would be nice if u can go to a friend who has a better network and ask him to upload it for u.
For example here fast download hoster .
We would be always greatful.
+ 1
I need the live demo firmware too.
would be greatfull for the firmware please.
I want n900x firmware too. :crying:
Brappa said:
I want n900x firmware too. :crying:
Click to expand...
Click to collapse
After flashing original firmware you need to restore modem part of LDU firmware
CP_N900XXXUDMK1_LLK_REV03_CL1252918.tar.md5
And bootloops are gone.
Note 3 demo unit frimware
rahulpk7up said:
i also have note 3 live demo unit .........and i created nandroid backup of it ......but it is for 2.41gb .....and my network is not strong so i faild to upload this much amount of data......if u from india and give me ur address than i will send u the cd of firware.....
Click to expand...
Click to collapse
hey i aslo want that firmware ... plzzzzz yar kisi b tarhan kr k bhej doo
can i have your number plz? for whatsapp mine is +923005601099
Mr
rahulpk7up said:
i also have note 3 live demo unit .........and i created nandroid backup of it ......but it is for 2.41gb .....and my network is not strong so i faild to upload this much amount of data......if u from india and give me ur address than i will send u the cd of firware.....
Click to expand...
Click to collapse
Dear Brother,
I have samsung Note 3 Live Demo Unit.
I flased with a real firmware, not the set is rebooting every time,
It would be an honour if you could send me that live demo unit backup.
I am from Dehradun, India
My address is
Dilshad Khan
Admin Office
MDDA Ramky ISBT,
ISBT Comound, Hariwdwar Bypass Road
Dehradun - 248001
9897402171
Thanks in advance
Samsung Galaxy Note 3 Live Demo Unit firmware
Brappa said:
After flashing original firmware you need to restore modem part of LDU firmware
CP_N900XXXUDMK1_LLK_REV03_CL1252918.tar.md5
And bootloops are gone.
Click to expand...
Click to collapse
Please send me someone link to this baseband: modem part of LDU firmware
CP_N900XXXUDMK1_LLK_REV03_CL1252918.tar.md5
Big thank you.
note 3 n900x
rahulpk7up said:
i also have note 3 live demo unit .........and i created nandroid backup of it ......but it is for 2.41gb .....and my network is not strong so i faild to upload this much amount of data......if u from india and give me ur address than i will send u the cd of firware.....
Click to expand...
Click to collapse
soo here bye i have read yours fourm i would to get link for note 3 live demo unit firmware phone was bricked by flashing with n9005 rom
Related
Happy New Year.
The Clempad 6 with Code: 13008 - 13663 / Made in China, from the company clementoni is very simple, good for children but has no support for upgrade or restore the firmware from the official site of Clementoni unfortunately. : (
If someone has the tablet and is easily let make a backup the ROM and upload it, or any other help is appreciated.
The Clempad 6 has been tested with firmware from the MID721 and denver-tac-70041 which upload it with Rockchip_Batch_Tool, works, but not the touch panel, which has no response.
Whatever help is welcome. Happy New Year.
Yotis_Thess said:
If someone has the tablet and is easily let make a backup the ROM and upload it, or any other help is appreciated.
Click to expand...
Click to collapse
Have you tried to contact Clementoni's customer support?
As far as I know, if your device is still under warranty you can get it reflashed for free...
Just try to contact them!
El Porcharo said:
Have you tried to contact Clementoni's customer support?
As far as I know, if your device is still under warranty you can get it reflashed for free...
Just try to contact them!
Click to expand...
Click to collapse
Thank you friend, i had a contact with them sometime before, they don't have firmware support for this tablet model on their customer support page. I think the tablet is not under warranty any more, since the original firmware has been deleted by accident. The only solution for me is, if
someone, sometime, find the original firmware or any other that could make this tablet to work and upload it here. The tablet uses the Rockchip_Batch_Tool to restore firmware.
Yotis_Thess said:
Thank you friend, i had a contact with them sometime before, they don't have firmware support for this tablet model on their customer support page. I think the tablet is not under warranty any more, since the original firmware has been deleted by accident. The only solution for me is, if
someone, sometime, find the original firmware or any other that could make this tablet to work and upload it here. The tablet uses the Rockchip_Batch_Tool to restore firmware.
Click to expand...
Click to collapse
I have Clempad 7cal No. 13645 with its original ROM 1.2 CPU, 1GB of RAM and 8GB HD. But how do the backup ROM? Besides, I'm looking for another ROM from other equipment.
HELP ME !
I would like to help me with CLEMPAD Clementoni Code: 13008-13663 that no longer pass the first image that says Clementoni blue! Can no longer use! It is a gift from my daughter 6 years in Italy. Was broken and can not be used! If you can help me so I can fix it at home on my risk! I want to give me or firmware:
C_1.1, android version 4.1.1, kernel version 3.0.36+, Lifeng @ incarsoft # 14, TUE JUL 30 2013 20:26:47 CT, build number RK-SDK 4.1.1 292x_Android v1.00.01 C_1.1a .
AJUTATTI please? ME! NOW MY TABLET can no longer use! It was used only 3 months! IS DAMAGE OF 46 DAYS!
You please help me with any information! Thank you very much!
Wanted answered THIS E-MAIL : [email protected] !
Send an email to Clementoni customer support, it's all you can do at the moment...
Firmware
Yotis_Thess said:
Happy New Year.
The Clempad 6 with Code: 13008 - 13663 / Made in China, from the company clementoni is very simple, good for children but has no support for upgrade or restore the firmware from the official site of Clementoni unfortunately. : (
If someone has the tablet and is easily let make a backup the ROM and upload it, or any other help is appreciated.
The Clempad 6 has been tested with firmware from the MID721 and denver-tac-70041 which upload it with Rockchip_Batch_Tool, works, but not the touch panel, which has no response.
Whatever help is welcome. Happy New Year.
Click to expand...
Click to collapse
italianu0000 said:
I would like to help me with CLEMPAD Clementoni Code: 13008-13663 that no longer pass the first image that says Clementoni blue! Can no longer use! It is a gift from my daughter 6 years in Italy. Was broken and can not be used! If you can help me so I can fix it at home on my risk! I want to give me or firmware:
C_1.1, android version 4.1.1, kernel version 3.0.36+, Lifeng @ incarsoft # 14, TUE JUL 30 2013 20:26:47 CT, build number RK-SDK 4.1.1 292x_Android v1.00.01 C_1.1a .
AJUTATTI please? ME! NOW MY TABLET can no longer use! It was used only 3 months! IS DAMAGE OF 46 DAYS!
You please help me with any information! Thank you very much!
Wanted answered THIS E-MAIL : [email protected] !
Click to expand...
Click to collapse
con01 said:
I have Clempad 7cal No. 13645 with its original ROM 1.2 CPU, 1GB of RAM and 8GB HD. But how do the backup ROM? Besides, I'm looking for another ROM from other equipment.
Click to expand...
Click to collapse
Have you managed to remove firmware? I'd like to give it a try!
Clempad - Clementoni
El Porcharo said:
Send an email to Clementoni customer support, it's all you can do at the moment...
Click to expand...
Click to collapse
I talked to them and they said to send them Clempad tablet! Rather difficult and cost too much! Nothing else can!
Cost to much?? Where would you ship from???
Clempad - Clementoni
El Porcharo said:
Cost to much?? Where would you ship from???
Click to expand...
Click to collapse
From Italy but now are in Romania!
italianu0000 said:
From Italy but now are in Romania!
Click to expand...
Click to collapse
If you have a trusted person in Italy that can send it for you, see if there are any bus service between Romania and Italy, one of those that also brings boxes only, so you could send it back to that person's place.
Clempad - Clementoni
italianu0000 said:
From Italy but now are in Romania!
Click to expand...
Click to collapse
Thank you very much! I just wanted to install Firmware! Wait, maybe there's an solution!
Yotis_Thess said:
Happy New Year.
The Clempad 6 with Code: 13008 - 13663 / Made in China, from the company clementoni is very simple, good for children but has no support for upgrade or restore the firmware from the official site of Clementoni unfortunately. : (
If someone has the tablet and is easily let make a backup the ROM and upload it, or any other help is appreciated.
The Clempad 6 has been tested with firmware from the MID721 and denver-tac-70041 which upload it with Rockchip_Batch_Tool, works, but not the touch panel, which has no response.
Whatever help is welcome. Happy New Year.
Click to expand...
Click to collapse
Hi, i have the same one ( Clempad 6 with Code: 13008 - 13663 / Made in China), but i 've lost the serial number with 9 digits, wich is on the back, and i can not registration it. Please can you send me the number(9 digits), to try and if it work, let me know how to make a backup to send you the original firmware. Thank's!
pilotosEVO said:
Hi, i have the same one ( Clempad 6 with Code: 13008 - 13663 / Made in China), but i 've lost the serial number with 9 digits, wich is on the back, and i can not registration it. Please can you send me the number(9 digits), to try and if it work, let me know how to make a backup to send you the original firmware. Thank's!
Click to expand...
Click to collapse
the standard serial number is
000 900 000
but the name of the tablet is Clempad Plus 6-12 4.1.1 ?
*****
Istruzioni Firmware
h t t p ://clempad.clementoni.it/clemhom...a_firmware.pdf
Firmware
h t t p ://clempad.clementoni.it/clemhome/site/firmware.zip
E' tutto nella risposta N. 8 delle FAQ di Clempad .....
*****
in another forum i found this, it's ok?
terapia77 said:
the standard serial number is
000 900 000
but the name of the tablet is Clempad Plus 6-12 4.1.1 ?
*****
Istruzioni Firmware
h t t p ://clempad.clementoni.it/clemhom...a_firmware.pdf
Firmware
h t t p ://clempad.clementoni.it/clemhome/site/firmware.zip
E' tutto nella risposta N. 8 delle FAQ di Clempad .....
*****
in another forum i found this, it's ok?
Click to expand...
Click to collapse
Hi, i am ok now with clempad. Thank's a lot!! Merry Christmas!!!
Hi guys,
I have a Clempad Plus but unfortunately it's been affected by a virus which can't be erased through a factory reset. Problem is that the micro usb is broken, so I can't flash the firmware through Rockchip Batch Tool. The only way is to flash a new ROM via recovery, but it seems that Clementoni its self doesn't have the ROM! The assistance told me that the only file they have is the firmware and the only procedure is flash through the USB cable.
Can someone help me?
Thank you very much.
Hi there.
I have 2 of this tablet for kids Clempad 6+. One is workind anotherone not working. I have manage to extract the stock rom from the working one , but i can not installed on the otherone. I tried using Fastboot. i conected the the tablet to de computer i opend cmd falowd the steps in the first post, writ adb devices and the computer find my device then i write " adb reboot-bootloader the tablet reboots and the computer does not recognise it anymor. i have searched for an usb driver but i can not find any. is there something i am doing wrong, or have i another otpion. does anibody have the firmware so i can try installing it with the sd card?
hello
i have galaxy s6 edge live demo unknow baseband and no imei , it's possible to reflash it for use in normal phone , gsm ,data ........ ?
thank you
soudara said:
hello
i have galaxy s6 edge live demo unknow baseband and no imei , it's possible to reflash it for use in normal phone , gsm ,data ........ ?
thank you
Click to expand...
Click to collapse
No that's not possible, Samsung live demo units have missing GSM parts , you can only use them limited with WiFi
That´s not 100% true, you just need the right tools for it, I have assembled the missing GSM parts in an Note 4 Edge 3 weeks ago and it´ss working great.
In addition you need an IMEI (best is when not used in your country, so check syourself an abroad IMEI) and then flash the unit with IMEI and actual SW.
Can u check an LDU S6 Edge for me?
Kevin1921 said:
That´s not 100% true, you just need the right tools for it, I have assembled the missing GSM parts in an Note 4 Edge 3 weeks ago and it´ss working great.
In addition you need an IMEI (best is when not used in your country, so check syourself an abroad IMEI) and then flash the unit with IMEI and actual SW.
Can u check an LDU S6 Edge for me?
Click to expand...
Click to collapse
Not trying to be a smartass, but his question was can a activate the GSM part by flashing. The answer is no. Sure you can change the whole mainboard too and have a working phone. Maybe even solder the right missing parts if you have the specialized equipment needed for this. But this is not for the average soul
Buying a Board, checking IMEI and getting the image for the model is much more difficult. But do what ever you want.
your "smartass"
Need some help please
I have a Live demo unit as well, but did not know that the GSM parts were missing, so I rooted it :S Now i cannot seem to get it to boot or flash another firmware on it just to get it up and running again.
Anyway I can get it running again? I just need to be able to undo the root i think, but trying to flash a stock ROM throws the following error:
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
Would really appreciate if you could help.
Thanks!
I've been trying to push a new rom to one of these demo units I've bought off ebay for 2 hours
.
So far
download mode isn't recognised by odin.....WTF?
but the phone is recognised like normal via USB
I put it in developer mode and the stock boot loader allows adb sideload.
but CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5
and twrp-2.8.6.0-zeroflte.img.tar
and a "stock" rom I found
all give wrong footer signature verification failed
There is an update from external storage that doesn't exist!
and update from cache
I don't know how to use that.
So how the help did you root it in the first place?
Without Odin or adb and without root. How do you apply an update? You can't change the recovery....
Kevin1921 said:
That´s not 100% true, you just need the right tools for it, I have assembled the missing GSM parts in an Note 4 Edge 3 weeks ago and it´ss working great.
In addition you need an IMEI (best is when not used in your country, so check syourself an abroad IMEI) and then flash the unit with IMEI and actual SW.
Can u check an LDU S6 Edge for me?
Click to expand...
Click to collapse
Do you think that is possible to do that with a S6 Edge Demo ?
Thanks
---------- Post added at 09:07 AM ---------- Previous post was at 08:49 AM ----------
Hi ! I have an s6 edge Demo (LRX22G.G925XXXU1AOD7_LLK),but I cannot take the retail mode off because I cannot acces the phone s menu.It s just saying 'Samsung retail mode' and under 'sistem running' .At the bottom of the display it s says BACKUP PASSWORD.Can someone help please? I also tried to install another firmware but odin gives me the nand fail.does someone knows if there is a firmware that works?Thanks
HELP, HELP
Need help I lost my phone IMEI Galaxy s6 edge SM-925W8, is there a method of recovery. I board not backup.
I tried to flash the original system and without success, I tried with mem Smart Switch but it does not work
Are you still interested in the live demo units?
Kevin1921 said:
That´s not 100% true, you just need the right tools for it, I have assembled the missing GSM parts in an Note 4 Edge 3 weeks ago and it´ss working great.
In addition you need an IMEI (best is when not used in your country, so check syourself an abroad IMEI) and then flash the unit with IMEI and actual SW.
Can u check an LDU S6 Edge for me?
Click to expand...
Click to collapse
HI there,
Are you still looking for a demo Unit? I have the following demo units with me and i want to sell them may i know if you are interested.
1) Samsung Galaxy S6 - SM-G920X
2) Samsung Galaxy S6 Edge - SM-G925X
This 2 are live demo Units, and i also have
1) Samsung Galaxy Tab A - which is still not out in the Market but as i work a samsung distributor i have received one for testing and it work fine...
If you are interested please let me know ASAP so i we can talk.
Need to contact
hi kevin1921
i wanna discuss with you something which is really and urgently required for me
can u give me your mail id, so that i will send a message to you, i mean so that we can chat once........
hope u will
thank you
Hi Kevin
My email id is [email protected]
email me so we can talk..
Email me ASAP,
Thanks
I would be interested in the tab a!
galaxy s6 ldu display swap
Is it possible to take the whole display from a galaxy s6 ldu and put it on a real unit instead of the cracked diaplay? In theory display assembly should be the same right?
nevermind
anyway you can post that demo firmware ? or PM to me? i have the same problem and want to see if i can get it booting again.
Thanks.
Same Problem
Didn't work, error saysNAND Write Start!! FAIL!
Now I cannot turn on the phone. Can you share SM-G920X ROM? Please
Thank you very much
Share the SM-G925X demo rom files LRX22G G925XXXU1AOC6
shadowcliffs said:
I just bought a S6 Edge LDU (LRX22G.G925XXXU1AOC6_LLK)
Phone is restored by flash the stock recovery for SM-G925X (downloaded from a paid website).
Click to expand...
Click to collapse
Hey shadowcliffs
Can You please share those 3 files that you downloaded to recover you SM-G925X LDU?
i flashed lt with the 925f version which messed it up when odin reached flashing modem.img thats when it failed. (probably since it dosent have a modem )
Once i messed up flashing it with a firmware that had modem.img any other firmware couldnt bring it back. (even removed sboot.bin modem.bin cm.bin) out of 925f rom
My original firmware that was on the device is bloated with stuff, but i rather have a working wifialphabet then a bricked device.
So can you please share those files, for i tried everything.
Thank You
You don't need those 3 files, and the AP file (which is 6.6 GB) wont flash anyway. You can just try to flash this recovery for 925x to see if it brings your phone back.
aviam said:
Hey shadowcliffs
Can You please share those 3 files that you downloaded to recover you SM-G925X LDU?
i flashed lt with the 925f version which messed it up when odin reached flashing modem.img thats when it failed. (probably since it dosent have a modem )
Once i messed up flashing it with a firmware that had modem.img any other firmware couldnt bring it back. (even removed sboot.bin modem.bin cm.bin) out of 925f rom
My original firmware that was on the device is bloated with stuff, but i rather have a working wifialphabet then a bricked device.
So can you please share those files, for i tried everything.
Thank You
Click to expand...
Click to collapse
Hey friends myself Jaberjeet Singh. Basically m not a developer but still i tries to perform experiments on my phone sometimes.I have Galaxy Note 3(SM-N900) - the international variant of Galaxy Note 3 and i believe many times while experiments the software of my phone or apps got crashed after the root or after installing a custom rom a no. of debugs are there so i suggest u should have the official ROM of this variant if your going to continue.. with it.So here's the fully official ROM/FIRMWARE straight from the samsung service centre , i just got it and i am sharing it with all of you. I own tried very much to find it over the internet but didn't find it and now i have the thing i need very much before so every one another which needs it could get it here on this thread.
REASONS WHY TO USE IT :
(1) If your phone is soft bricked or fully bricked doesn't matter its the rom from service centre and definately going to resolve your issue.
(2)If you are a developer and try making your phone installing some recoveries,boot animations,custom roms etc... you should have this rom so that in the case you are able to revert your phone to as it was a new one....
(3)It includes Bootloader file also that i definately did not find on the others f.... roms from the internet .It means if your device freezes at the satrtup showing "samsung" animation and doesnot respond further again my files are going to help you.....
WARNING :- These files are only for international variant of GALAXY NOTE 3(SM-N900)
So,please don't try to flash these files any another variant .
The variants it DONOT supports are listed below.
SM-N9002 Dual Sim variant for Chinese Market
SM-N9005 LTE variant
SM-N900K for KT Telecom South Korea
SM-N900L for LGU+ South Korea
SM-N900S for SK Telecom South Korea
SM-N900W8 - Canadian
SM-N9000Q Turkish
SM-N900A for AT&T United States
SM-N900P for Sprint United States
SM-N900T for T-Mobile USA
SM-N900V for Verizon Wireless
All of these are Galaxy Note 3 variants world wide in various countries . U must not Use these firmware files on these variants its all UR RESPONSIBILITY.
INFORMATION ABOUT THE FILES
CSC_ODD_N900ODDEBOB2_CL4278891_QB4154091_REV00_user_low_ship.tar
CP_N900DDUEBOB1_REV01_CL1838651_SIGNED.tar
BL_N900XXUEBOD1_CL4115321_QB4622537_REV00_user_low_ship.tar
AP_N900XXUEBOD1_CL4115321_QB4622537_REV00_user_low_ship.tar
Odin3_v3_09.zip
HA3G_EUR_OPEN_32G.pit
>>>>>>>>>>>>>>>>>>>>>>Replace the dollar sign($) by ( . ) in links to make them working.<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Download link - 4shared$com/office/MxDAsFvCce/link$html
INSTRUCTIONS
(1) Install Samsung Drivers first or you could download them here developer$samsung$com /technical-doc/view$do?v=T000000117
(2)Now download winrar according to ur windows (32/64)bit if you dont have download it from here - www$rarlab$com/download$htm
(3)If you really have brain u should downloaded the file(SM-N900.rar) from mega site . U need winrar to extract it in your windows machine.Now extract the rar file to your desktop.
(4)After extraction you will find a folder named SM-N900 now open that folder and run "Odin3 v3.09.3.exe" as administrator .
(5)Remember do not select the "re-partition" only select "auto reboot" & f.reset time".
(6)Now add the files we have downloaded in the odin as i do see this image imageteam$org/img-563db14962d66$html
(7)When you connect your phone in download mode with your machine the com:4 port should turn blue if it doesnot simply install samsung kies from its official site
and then try again. if you dont know how to boot into download mode see here - www$android$gs/enter-galaxy-note-3-download-mode
(8)After adding all the files and maintaining the ticks acc. to my description click on start and wait untils your odin shows pass in green colour.If it does not CONGO your phone is done go to service centre to replace your PCB (printed circuit board) it will be replace free of cost if your phone is under warranty.
email me if xda remove the link or any another url error on [email protected] . I will send the file link to you personaly.
thanks for watching my post and if anyone had official samsung rom of kitkat of this variant plzz share it with me . Myself and many need it. lollipop sucks in game of battery...
I have an unlocked sprint s8 plus I recently flashed it with the u1 firmware instead of u ...now all works but will not register on network ...ive tried flashing stock with Odin...sven through smart switch ..and goes 100 but still no service !!!
skindeep75 said:
I have an unlocked sprint s8 plus I recently flashed it with the u1 firmware instead of u ...now all works but will not register on network ...ive tried flashing stock with Odin...sven through smart switch ..and goes 100 but still no service !!!
Click to expand...
Click to collapse
Why not just flash the carrier version you are on instead of the U1?
I tried originally and no difference at all in picking up lte or any changes what so ever
I'll take care of you, and fix it for you. Feel free to contact me through PM and install TeamViewer. Free of charge. Spread the experience to help others is all ask.
Check you IMEI if it's showing correct by pressing *#06#
Dear all,
Rcently my redmi note 9 pro got hardly bricked after flashing a wrong region rom.After too many struggles the phn got its life back.But now one more issue arised that there's no network at all.Now the technician asking for more money to fix this network.
Its too much for me,as im just a student.
I need to know if i can repair this network problem myself.
Can anyone let me know about the procedures?
Rejoyan01 said:
Dear all,
Rcently my redmi note 9 pro got hardly bricked after flashing a wrong region rom.After too many struggles the phn got its life back.But now one more issue arised that there's no network at all.Now the technician asking for more money to fix this network.
Its too much for me,as im just a student.
I need to know if i can repair this network problem myself.
Can anyone let me know about the procedures?
Click to expand...
Click to collapse
Specify network , all, bluetooth, wifi, sim?
Did you flash stock firmware from your region / country ?
flairepathos.info said:
Specify network , all, bluetooth, wifi, sim?
Did you flash stock firmware from your region / country ?
Click to expand...
Click to collapse
Sir my phone is Indian phn .and i live in BD.so i flashed it in BD
Rejoyan01 said:
Sir my phone is Indian phn .and i live in BD.so i flashed it in BD
Click to expand...
Click to collapse
Okay please use full english when replying
So Indian phone Living in Bangladesh, fine
What net work is not working : all, bluetooth, wifi, sim ,gps?
reply like so:
all- no
bluetooth- yes
...