PLEASE HELP! Device Status Issue - Sprint Samsung Galaxy Note 3

Earlier today I was downloading Xposed Settings but when I went to install it I accidentally re installed Xposed Framework. Now I rooted my phone a few days ago using Kingo and did the Xposed framework with Wanam to fake my system status to official. After reinstalling Xposed Framwork over itself I cannot get my system status back to Official from Custom.
I have tried uninstalling/reinstalling the framework, uninstalling the app and redo the method to fake system status, I even tried to un root - re root - install wanam and xposed fresh and redo the method and still stuck on custom.
Any ideas? Thanks in advanced for any help.
Edit Just tried factory reset as well still custom.

Kongoll said:
Earlier today I was downloading Xposed Settings but when I went to install it I accidentally re installed Xposed Framework. Now I rooted my phone a few days ago using Kingo and did the Xposed framework with Wanam to fake my system status to official. After reinstalling Xposed Framwork over itself I cannot get my system status back to Official from Custom.
I have tried uninstalling/reinstalling the framework, uninstalling the app and redo the method to fake system status, I even tried to un root - re root - install wanam and xposed fresh and redo the method and still stuck on custom.
Any ideas? Thanks in advanced for any help.
Edit Just tried factory reset as well still custom.
Click to expand...
Click to collapse
I've also had this from the start, never got the official status to stick. I'm not worried about it though, what harm could it do?

It really doesn't matter until there is another update ... It's just cosmetic
Sent from my SM-N900P using Xparent BlueTapatalk 2

Related

[Q] SuperSU has no root permissions.

I installed cm 10.2 ROM on my RAZR and a few days later installed jellywiz rls7. Now that I have jellywiz it seems like supersu doe not have any root permissions, no root apps work, and when I try to update the super binary it says installation failed, when I install update through recovery it gives me an error saying status 6. Can someone help me out correcting this problem? I've been googling this for hours, nothing works.
Thanks in advance.
I've never used Jellywiz, but is Superuser built in under your settings, or is it a standalone program? I've had poor luck with SuperSU, but superuser is built in to CM10 and AOKP roms, and has never missed a beat. Have you tried uninstalling, boot to recovery, wiping cache/dalvik, rebooting, and reinstalling?
EDIT
Did you follow the installation instructions on the forum to the T? It seems to be pretty particular as to the installation process, unlike others I have used.
You may need to turn on root from "developer options" in settings. I think most 4.3 roms require this. If you don't have that option in settings, I would re-read the install instructions or maybe ask in that thread.
Sent from my Optimus G using Xparent Red Tapatalk 2
LuckiestNut419 said:
I've never used Jellywiz, but is Superuser built in under your settings, or is it a standalone program? I've had poor luck with SuperSU, but superuser is built in to CM10 and AOKP roms, and has never missed a beat. Have you tried uninstalling, boot to recovery, wiping cache/dalvik, rebooting, and reinstalling?
EDIT
Did you follow the installation instructions on the forum to the T? It seems to be pretty particular as to the installation process, unlike others I have used.
Click to expand...
Click to collapse
Yeah I followed every instruction except the last 2, I could not find how to do it. Supersu is built in the ROM and when I try to uninstall it says uninstallation failed. When I update it through play store it still gives me the same errors and the pop up installation failed or uninstallation failed when I try to update or uninstall.
helioXverse said:
You may need to turn on root from "developer options" in settings. I think most 4.3 roms require this. If you don't have that option in settings, I would re-read the install instructions or maybe ask in that thread.
Sent from my Optimus G using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
I am on 4.1.2 not 4.3 anymore.
I fixed it, I just rerooted and everything is fine now. I dlled a root checker in playstore and it said i wasnt rooted so i rerooted and it replaced supersu with superuser, everything is working fine. Thanks for the help anyways

[Q] Un-root after Towel root

What steps should be taken to Un-root the hdx 7 and reset to stock after rooting with the latest Towel root toolbox and firmware?
rootnooby said:
What steps should be taken to Un-root the hdx 7 and reset to stock after rooting with the latest Towel root toolbox and firmware?
Click to expand...
Click to collapse
To do that, you must uninstall the Towelroot app (shouldn't be too hard) then, to finish it off, try running these commands in an adb shell:
Code:
su
mount -o rw,remount /system
rm /system/bin/su
rm /system/xbin/su
mount -o ro,remount /system
exit
You are now unrooted!
Sent from my Nexus 7 using Tapatalk
rootnooby said:
What steps should be taken to Un-root the hdx 7 and reset to stock after rooting with the latest Towel root toolbox and firmware?
Click to expand...
Click to collapse
in SuperSu > settings > fullunroot
and it will unroot your Kindle
and then settings > device > restore factory settings
blade22 said:
in SuperSu > settings > fullunroot
and it will unroot your Kindle
and then settings > device > restore factory settings
Click to expand...
Click to collapse
He never said he was using SuperSU. And I wouldn't recommend the factory reset as those have caused many people issues around here.
Sent from my iPod touch using Tapatalk
r3pwn said:
He never said he was using SuperSU. And I wouldn't recommend the factory reset as those have caused many people issues around here.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
i have done the same steps and factory reset..faced no Issues.
and may be people facing issues might not have uninstalled xposed module and xposed framework
r3pwn said:
He never said he was using SuperSU. And I wouldn't recommend the factory reset as those have caused many people issues around here.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
I factory reset my 8.9 after rooting 2 days ago. No issues at all except YOU MUST ALLOW OTA UPDATES BEFORE YOU RESET OR IT WILL NOT ALLOW YOU TO REGISTER AND YOU WILL KEEP POPPING BACK TO THE LAGUAGE SETTING AT RANDOM TIMES, I had a hassle re enabling ota after the reset, very annoying. As to Xposed .. I would MAKE SURE you uninstall xposed modules and xposed framework before resetting. I would also recommend putting back to rights ANY changes you make in build prop as well as custom disables of the nav bar. I have ran into problems with other tablets when resetting after nav bar changes.
conan1600 said:
I factory reset my 8.9 after rooting 2 days ago. No issues at all except YOU MUST ALLOW OTA UPDATES BEFORE YOU RESET OR IT WILL NOT ALLOW YOU TO REGISTER AND YOU WILL KEEP POPPING BACK TO THE LAGUAGE SETTING AT RANDOM TIMES, I had a hassle re enabling ota after the reset, very annoying. As to Xposed .. I would MAKE SURE you uninstall xposed modules and xposed framework before resetting. I would also recommend putting back to rights ANY changes you make in build prop as well as custom disables of the nav bar. I have ran into problems with other tablets when resetting after nav bar changes.
Click to expand...
Click to collapse
Thanks for all the great feedback. I should have provided more detail to start. I have a follow up question/clarification. This is what did:
1. Run Towel root - success
2. Followed directions to block ota updates and install supersu. - success
3. With root confirmed, Installed exposed frame work and module from here: http://forum.xda-developers.com/showthread.php?t=2618158 (to get play store and other google apps). - success
4. Activate exposed module and update. - success
5. Installed hdxposed.Apk, enabled it, Rebooted, and play store worked. - success
6. In any order, installed the files from the link. - success
Install play services
Install framework
Install Google account manager
7. Overall, all worked well.
Question:
What is the best way to undo everything I did?
Enable OTA updates?
Update to the latest firmware (basically to get prime music and fix wifi issues I'm having)?
Re-root?
conan1600 said:
I factory reset my 8.9 after rooting 2 days ago. No issues at all except YOU MUST ALLOW OTA UPDATES BEFORE YOU RESET OR IT WILL NOT ALLOW YOU TO REGISTER AND YOU WILL KEEP POPPING BACK TO THE LAGUAGE SETTING AT RANDOM TIMES, I had a hassle re enabling ota after the reset, very annoying. As to Xposed .. I would MAKE SURE you uninstall xposed modules and xposed framework before resetting. I would also recommend putting back to rights ANY changes you make in build prop as well as custom disables of the nav bar. I have ran into problems with other tablets when resetting after nav bar changes.
Click to expand...
Click to collapse
I ran into the problem with the language repeatedly popping back upbecaus I didn't first re-enabe the OTAs. How did you fix thisissue please? Thanks or you help in advance.
brooklynstar220 said:
I ran into the problem with the language repeatedly popping back upbecaus I didn't first re-enabe the OTAs. How did you fix thisissue please? Thanks or you help in advance.
Click to expand...
Click to collapse
You need to reverse the method originally used to block OTAs of which there are several. What version of FireOS are you on?
Davey126 said:
You need to reverse the method originally used to block OTAs of which there are several. What version of FireOS are you on?
Click to expand...
Click to collapse
I am version 13.3.2.4. The problem I am running into at this point is that USB debugging is not working. I have even dowloaded seperate debugging apps and they fail to work giving me errors that it has stopped. I am assuming there is something wrong in that script at this point. Is there any way to fix it? I disabled the OTA updates with KFHDX Toolkit v0.95.
Also I can root and unroot with no problem but can't flash anything because even though it says safe strap is installed it won't boot into recovery.
brooklynstar220 said:
I am version 13.3.2.4. The problem I am running into at this point is that USB debugging is not working. I have even dowloaded seperate debugging apps and they fail to work giving me errors that it has stopped. I am assuming there is something wrong in that script at this point. Is there any way to fix it? I disabled the OTA updates with KFHDX Toolkit v0.95.
Also I can root and unroot with no problem but can't flash anything because even though it says safe strap is installed it won't boot into recovery.
Click to expand...
Click to collapse
Sounds like you have some deeper problems with the ROM on your device. In your shoes I would install Safestrap v3 (not v4) followed by the SS compatible version of Nexus. This will also address the Google Play/Services issues. Others may suggest unlocking your bootloader. I wouldn't go there given current issues ... even if you could somehow reenable OTA. High risk imo.
Davey126 said:
Sounds like you have some deeper problems with the ROM on your device. In your shoes I would install Safestrap v3 (not v4) followed by the SS compatible version of Nexus. This will also address the Google Play/Services issues. Others may suggest unlocking your bootloader. I wouldn't go there given current issues ... even if you could somehow reenable OTA. High risk imo.
Click to expand...
Click to collapse
I was able to get that version of Safestrap installed and was able to flash roms again but ADB is still not connecting when attached to the computer. Do you think a nanroid restore from my original setup could help fix this?
Davey126 said:
Sounds like you have some deeper problems with the ROM on your device. In your shoes I would install Safestrap v3 (not v4) followed by the SS compatible version of Nexus. This will also address the Google Play/Services issues. Others may suggest unlocking your bootloader. I wouldn't go there given current issues ... even if you could somehow reenable OTA. High risk imo.
Click to expand...
Click to collapse
Thank you for your help with this. What is crazy but was probably a driver issue the whole time, I udated my laptop to Windows 10 and somehing told me to try it again and it worked immediately with the Toolkit and re-enabled the OTA updates. Thanks again.

[Q] need help please(unroot)

how do i unroot or at least hide my root for mabinogi duel korean version?
current ROM: JDQ39-I9205XXUAMF3
current kernel 3.4.0
thanks
Do you have SuperSU on it? If so just look in SuperSu settings - there is a choice in there to Unroot. choose that, reboot and you should be set.
No i dont have supersu on my phone... although it rooted
pekkauwer said:
No i dont have supersu on my phone... although it rooted
Click to expand...
Click to collapse
You could install Xposed Installer http://repo.xposed.info/module/de.robv.android.xposed.installer then RootCloak http://repo.xposed.info/module/com.devadvance.rootcloak
Honestly ive done that thats why im asking to hide my root... the rootcloak doesnt work.. i have added the exception and reboot but still gives error something about rooted

ROOT ON OC1 WITH WONDERSHARE! Kingroot apk and desktop NOT working

heres the link http://www.wondershare.com/mobile-phone/how-to-root-android.html
JUST now rooted stock oc1 after flashing xposed uninstall through flashfire it got stuck on bootloop. I Odin flash to stock nonroot oc1 and used this to regain root. Currently installing flashfire to install deodexed oc1 and reinstall xposed will update. PC NEEDED to root. But it is one click. This also installs supersu. Make sure you have developer enabled and click ENABLE USB DEBUG. I wish all of you with no luck using kingroot... GOOD LUCK!
*******not responsible for anything that might happen this worked FOR ME it DOES NOT MEAN IT WILL FOR YOU Things like this can cause brick. Rooted schi545 on stock bloated clean oc1 lollipop using this*************
*****edit*** mods im new to the site but i posted this here because of a number of threads about failed kingroot on oc1 please move accordingly as you see fit thanks
UPDATE:
Flashfire successfully updated the stock wondershare rooted oc1 with rooted deodexed oc1 stock.
I Disabled supersu
Launched android pay with NO XPOSED FRAMEWORK INSTALLED
application successfully verified and added my cards
Then Used flashfire to flash xposed xposed-sdk21-arm-20150430-arter97-V3.zip (the frame work not installer) - listed in the link below. Phone booted fine with ANDROID IS UPGRADING at startup with 238 apps. Then installed the v3 alpha 2 installer. Says framework not active but it is.
i dont take any credit for xposed on oc1 credit due to respective owners just following direction and want to condense everything ive been doing.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
This gets xposed working reliably on oc1 along with android pay (ive yet to pay so will have to update upon successful transaction but my cards are added)
I WOULD HIIIIIIIIIIIIGHLY SUGGEST IF YOU WANT ANDROID PAY TO WORK ON YOUR XPOSED ROOTED OC1 DO NOT FLASH THE XPOSED UNINSTALLER it gave me a boot loop at vzw splash screen. Instead i suggest you REFLASH PREROOTED DEODEXED oc1 using flashfire to remove the frame work since flashfire performs a full wipe, then disable supersu once booted go through the android pay set up and once you have all the cards you want added reenable supersu and reinstall xposed framework via flashfire and restore your data. This is what i did... the second time which is why im advising against using the xposed uninstall zip.
So I finally got around to trying to purchase with android pay on my stock deodexed somewhat debloated and rooted xposed oc1. The phone and terminal act as if my nfc isn't even turned on nothing happens

Galaxy S4 SCH-I545 OC1 5.0.1: Uninstall KingUser?

Help..never seen this before. Stubborn KingUser
Running OC1 5.0.1 on my SCH-I545 and decided to factory reset. Following my unroot through SuperSU and subsequent factory reset, I loaded up my phone to the custom "unlocked padlock" logo. Weird, but didn't think much of it until I looked at my phone status set as "Custom" and KingUser somehow still installed(!??!!?!?). I cannot uninstall through the app itself. as the app is not in rooted status and am at a loss for this. My phone is not rooted, but i also can't delete the app.
Any word as to my options in getting completely back to stock? My attempts at odin to of1 and back to oc1 were unsuccessful.
It'll cost $3.99 plus tax, but you can follow this link https://play.google.com/store/apps/details?id=darkslide.com.supersumepro . I had tried several options before they either didn't work at all or they removed KingUser and my root and replaced it with nothing. This worked. Read and follow the instructions on the app page in the store. It's as easy as pushing s big red button.

Categories

Resources