I have a couple more questions.
1.) I have the brick bug, right?
2.) Flashing a safe kernel and then restoring the backup won't help either I presume?
3.) Would flashing the PIT file from this thread http://forum.xda-developers.com/showpost.php?p=26428986&postcount=1 solve my problem?
thx in advance
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi everyone
first of all, this is my first post so if i posted in the wrong section i am sorry
now here's my problem:
i have a Galaxy S2 (GT-I9100) with rooted stock ICS 4.0.4. I wanted to restore a backup which I created using the Nandroid Backup app on the same day. So i went into recovery mode, flashed a temporary CWM (from this thread http://http://forum.xda-developers.com/showthread.php?t=2327472) then restored the backup from my SD card. if i remember correctly, if the restoration of the backup was succesful the phone should stay in CWM. In my case the screen went black for a few seconds then it looked like it would boot. However it just got stuck showing the Samsung logo with model number, so Samsung Galaxy S II GT-I9100.
I can still enter recovery and download mode. I did a factory reset, wiped cache partition and even re-flashed the stock ROM using odin but to no avail. After flashing the ROM, it didn't work so i did a factory reset again. It still got stuck on the logo so i went into recovery again. In recovery mode it says "E: failed to mount /sytsem (invalid arguement)". i could solve that problem by reflashing the ROM though.
does anybody know what caused this and even more imortantly, how to solve my issue?
On a side note, could be relevant, my phone just froze all of a sudden some times in the past months. i had to reboot my phone everytime it froze
Thx in advance
EDIT: ok, i've re-flashed the ROM again with odin. at first there is the green droid and the blue loading bar right below, but after a few seconds the screen goes black again and it tries to boot and gets stuck. I pulled battery, reinserted it and went into recovery, wiped cache. when i select "reboot" from the menu it says "E: failed to mount /sytsem (invalid arguement)"
Edit2: after flashing the ROM i get this "E: failed to mount /data (invalid arguement)" when rebooting over recovery. I've found a thread where it says i need to flash the dbdata.rfs.tar using odin. i will try that now
Edit3: when i try to flash the file i get a "NAND write start" "fail" error. I've been to a store that will take care of my problem.
bump
-shadow.walker- said:
Hi everyone
first of all, this is my first post so if i posted in the wrong section i am sorry
now here's my problem:
i have a Galaxy S2 (GT-I9100) with rooted stock ICS 4.0.4. I wanted to restore a backup which I created using the Nandroid Backup app on the same day. So i went into recovery mode, flashed a temporary CWM (from this thread http://http://forum.xda-developers.com/showthread.php?t=2327472) then restored the backup from my SD card. if i remember correctly, if the restoration of the backup was succesful the phone should stay in CWM. In my case the screen went black for a few seconds then it looked like it would boot. However it just got stuck showing the Samsung logo with model number, so Samsung Galaxy S II GT-I9100.
I can still enter recovery and download mode. I did a factory reset, wiped cache partition and even re-flashed the stock ROM using odin but to no avail. After flashing the ROM, it didn't work so i did a factory reset again. It still got stuck on the logo so i went into recovery again. In recovery mode it says "E: failed to mount /sytsem (invalid arguement)". i could solve that problem by reflashing the ROM though.
does anybody know what caused this and even more imortantly, how to solve my issue?
On a side note, could be relevant, my phone just froze all of a sudden some times in the past months. i had to reboot my phone everytime it froze
Thx in advance
EDIT: ok, i've re-flashed the ROM again with odin. at first there is the green droid and the blue loading bar right below, but after a few seconds the screen goes black again and it tries to boot and gets stuck. I pulled battery, reinserted it and went into recovery, wiped cache. when i select "reboot" from the menu it says "E: failed to mount /sytsem (invalid arguement)"
Edit2: after flashing the ROM i get this "E: failed to mount /data (invalid arguement)" when rebooting over recovery. I've found a thread where it says i need to flash the dbdata.rfs.tar using odin. i will try that now
Edit3: when i try to flash the file i get a "NAND write start" "fail" error. I've been to a store that will take care of my problem.
Click to expand...
Click to collapse
hey buddy .. just wana know .. all u have done .. I mean to flash CWM ,, backup ,, restore and any stuff ... u performed all of these things using stock kernel .. ???
c0olmad said:
hey buddy .. just wana know .. all u have done .. I mean to flash CWM ,, backup ,, restore and any stuff ... u performed all of these things using stock kernel .. ???
Click to expand...
Click to collapse
yeah, stock ICS kernel and ROM
-shadow.walker- said:
yeah, stock ICS kernel and ROM
Click to expand...
Click to collapse
buddy it is advised to not to perform any thing like .. restore .. flashing etc etc .. as stock kernel is not safe to perform these operations .. whats the progress of ur fone now .. ???
-shadow.walker- said:
yeah, stock ICS kernel and ROM
Click to expand...
Click to collapse
Like c0olmad said, there is a brick bug in ICS. It would be alot better and safer to flash stock jellybean 4.1.2 link below.
http://forum.xda-developers.com/showthread.php?t=1544487
Unsure of why your still on ics but below is a link to get a safe kernal where brick bug has been fixed. Make sure you get the kernal for your build.
http://forum.xda-developers.com/showthread.php?t=1877270
c0olmad said:
buddy it is advised to not to perform any thing like .. restore .. flashing etc etc .. as stock kernel is not safe to perform these operations .. whats the progress of ur fone now .. ???
Click to expand...
Click to collapse
I've been to the store today. He said my case is a bit complicated and he will call me when it' finished.
stonedpsycho said:
Like c0olmad said, there is a brick bug in ICS. It would be alot better and safer to flash stock jellybean 4.1.2 link below.
http://forum.xda-developers.com/showthread.php?t=1544487
Unsure of why your still on ics but below is a link to get a safe kernal where brick bug has been fixed. Make sure you get the kernal for your build.
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
TBH, I was aware that there was a brick bug but I thought i wouldn't be affected :silly:
And I was happy with ICS so I didn't upgrade. Also there is an app that currently only works on 4.0 or lower, so I didn't bother with upgrading.
the technicians of the store weren't able to repair it. i guess i have the brickbug :crying:
Related
I am XXKI8, and I tried to flash some of the custom roms my phone is getting stuck on Boot logo. And when I go in recovery it says E:\ cant mount system/cache and some other things.
I cant restore backup too...I have to odin it back. this happened with Batista, Touch X power and on Wanamlite.
But when I flashed rarity it worked fine. any Idea why this error is coming up.
zking said:
I am XXKI8, and I tried to flash some of the custom roms my phone is getting stuck on Boot logo. And when I go in recovery it says E:\ cant mount system/cache and some other things.
I cant restore backup too...I have to odin it back. this happened with Batista, Touch X power and on Wanamlite.
But when I flashed rarity it worked fine. any Idea why this error is coming up.
Click to expand...
Click to collapse
Try to do a factory reset before flashing a Custom ROM.
And maybe you need to do a hard reset (*2767*3855#) after flashing?!
As this will wipe your internal SD card, be sure to backup everything you need before.
Good luck !
I am always doing Factory reset, Wipe Partition and after flash Wipe dalvik. But this is happening. Also, if my fon is not booting up so how I can Hard reset with those code after flashing.
I was on vibrant and I am very much familiar with this flashing things. Just its not happening this time.
This problem is not going away. Today I tried to flash Villain rom. But still I cant boot back. I noticed when flashing, my progress bar runs for 1/4th and after that it says installation complete. and when I reboot it cant boot beyond boot logo. And when I go back in recovery it says cant mount E:\system\cache and etc.
Please help. I have odin back to stock and re-rooted so many times that my custom binary count is 9.
I never faced this problem with VIBRANT.
zking said:
This problem is not going away. Today I tried to flash Villain rom. But still I cant boot back. I noticed when flashing, my progress bar runs for 1/4th and after that it says installation complete. and when I reboot it cant boot beyond boot logo. And when I go back in recovery it says cant mount E:\system\cache and etc.
Please help. I have odin back to stock and re-rooted so many times that my custom binary count is 9.
I never faced this problem with VIBRANT.
Click to expand...
Click to collapse
I had similar issue with as you, i'll post my fix ( or atleast how i think i fixed it) ====>
Phew! NOW I HAVE CM7 RUNNING ON MY PHONE!!
I'm gonna try to explain how i fixed my issue, as clear and explanatory as i can..
lucky i didn't brick my phone during all this, because I tried so many things and none worked.I unsuccessfully tried downgrading to XWkI4, ZCKI4, and alot others via Odin... after flashing all i get is tons of error messages(on 3e recorvery) E: can't open/cache or E:failed blah bla bla to load /efs... i thought OMG! my phone is bricked! then i recalled reading somewhere that flashing the 3 tar (PDA,MODEM,CSC) files usually should work(maybe better than flashing a 1 tar file), so i found a 3 files xxKI3 rom, flashed it and BAM! it booted up this time without any error. so now i went ahead and rooted it since the tar files came unrooted, then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
http://forum.xda-developers.com/showthread.php?t=1312056&page=2
henrychukx said:
I had similar issue with as you, i'll post my fix ( or atleast how i think i fixed it) ====>
then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
http://forum.xda-developers.com/showthread.php?t=1312056&page=2
Click to expand...
Click to collapse
When I tried to do the same I cant do it as it says E: cant mount Cache/System etc..
Than I had to go back to Stock. Flashing stock via odin is not problem at all. Even XXKI8 non wipe version also am able to flash & boot up without any issue. Only am not able to flash custom rom through CWM. I think its not getting flashed properly.
zking said:
When I tried to do the same I cant do it as it says E: cant mount Cache/System etc..
Than I had to go back to Stock. Flashing stock via odin is not problem at all. Even XXKI8 non wipe version also am able to flash & boot up without any issue. Only am not able to flash custom rom through CWM. I think its not getting flashed properly.
Click to expand...
Click to collapse
Did you try the 3 tar method ? i.e flashing PHONE, PDA, and CSC ?
henrychukx said:
Did you try the 3 tar method ? i.e flashing PHONE, PDA, and CSC ?
Click to expand...
Click to collapse
Yes. I said before also, odined back to stock is no problem at all. I flashed KI3 (which has all three files) + KI8 which is a single file, with no issue.
Whenever I am trying to flash a custom rom I am getting stucked on boot screen. Than I have to ODIN back to STOCK.
Hope this clears your doubts.
Just to make sure. What recovery version do you have? CWM from e.g CF-Root. Or Clockwork mod from Rom Manager.
Be aware of the difference.
Sent from my GT-I9100 using Tapatalk
zking said:
Yes. I said before also, odined back to stock is no problem at all. I flashed KI3 (which has all three files) + KI8 which is a single file, with no issue.
Whenever I am trying to flash a custom rom I am getting stucked on boot screen. Than I have to ODIN back to STOCK.
Hope this clears your doubts.
Click to expand...
Click to collapse
hmm.... Try downgrading to XWKI4,root again and flash a custom kernel like ninpho or speedmod, this would most likely solve it..
cheers!
volapyk said:
Just to make sure. What recovery version do you have? CWM from e.g CF-Root. Or Clockwork mod from Rom Manager.
Be aware of the difference.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I am using CWM from CF-ROOT (chainfire's Kernel)
henrychukx said:
hmm.... Try downgrading to XWKI4,root again and flash a custom kernel like ninpho or speedmod, this would most likely solve it..
cheers!
Click to expand...
Click to collapse
I ll try your suggestion now..and ll let you know the results.
henrychukx said:
hmm.... Try downgrading to XWKI4,root again and flash a custom kernel like ninpho or speedmod, this would most likely solve it..
cheers!
Click to expand...
Click to collapse
Sir I tried your method too. But whenever I am flashing a custom kernel via odin my fon is getting stuck on boot screen with yellow triangle.
So after increasing my binary count to 17 now, I am back on Stock XXKI8 with CFroot.
zking said:
Sir I tried your method too. But whenever I am flashing a custom kernel via odin my fon is getting stuck on boot screen with yellow triangle.
So after increasing my binary count to 17 now, I am back on Stock XXKI8 with CFroot.
Click to expand...
Click to collapse
thats wierd...i wonder what you're doing wrong.. type "*#1234#" and write the versions of what you have.
PDA: I9100XWKI8
Phone: I9100XXKI4
CSC: I9100OXXKI2
Build Info: Wed Sep 28 20:51:36 KST 2011
Also, I noticed when I boot into CWM Recovery and go to Wipe Dalvik Cache I get a mesage E:unknown volume for path [/sd-ext] (this is before performing actual wipe) but when I wipe dalvik catch it says Dalvik Catch wiped.
One more thing I like to share - first I flashed STOCK KI3 then I noticed it says cant find E:/System/(some folder for CSC which I dont remember exactly) and it says could not install the CSC. Than I upgraded to KI8 same error for CSC came.
now again I tried to flash siyah kernel 2.0 through CWM, still same problem I am stuck on boot logo.
When I go back to recovery it takes a lot more time than usual and following errors I get
E: cant mount /cache/recovery/command
E: cant mount /cache/recovery/log
E: cant open /cache/recovery/log
E: cant mount /cache/recovery/last_log
E: cant open/cache/recovery/last_log
and when I tried to wipe data/factory reset it says
E: cant mount /sdcard/
Even I tried mounting SD card in recovery but its says error mounting sd card.
Please please help.....I never faced this problem with my VIBRANT.
try xxki3 again， but this time make sure you use a 3 tar method i.e PDA， MODEM， CSC... dont use a 1 tar pacjage or you will get stuck at boot agian.
Well of course you never had the problem with your vibrant, you weren't flashing the same packages.
Try flashing Litening or some other complete firmware that has an Odin flashable package, then use that as a base.
Hopefully you haven't selected the "repartition" option in Odin at any stage and mucked up the tables.
knightnz said:
Well of course you never had the problem with your vibrant, you weren't flashing the same packages.
Try flashing Litening or some other complete firmware that has an Odin flashable package, then use that as a base.
Click to expand...
Click to collapse
Oki I ll give this a try too. But remember I don't have any problem with flashing a STOCK ROM.
knightnz said:
Hopefully you haven't selected the "repartition" option in Odin at any stage and mucked up the tables.
Click to expand...
Click to collapse
No I haven't selected repartition and not even touched .PIT
knightnz said:
Well of course you never had the problem with your vibrant, you weren't flashing the same packages.
Try flashing Litening or some other complete firmware that has an Odin flashable package, then use that as a base.
Hopefully you haven't selected the "repartition" option in Odin at any stage and mucked up the tables.
Click to expand...
Click to collapse
OK am here again. I tried Flashing the Litening rom 6.1 through odin. It got succeded but stuck on Boot with yellow triangle.
Also, I noticed when I boot into CWM Recovery and go to Wipe Dalvik Cache I get a mesage E:unknown volume for path [/sd-ext] (this is before performing actual wipe) but when I wipe dalvik catch it says Dalvik Catch wiped even if I press back button it says Dalvik Cache wiped.
I dont know whats happening...this way I ll remain stuck on STOCK and soon I have to hang my self......
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
cooza said:
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
Click to expand...
Click to collapse
borstri said:
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
Click to expand...
Click to collapse
After I hard reset and wiped cache..its still reboots..
Someone help me!! :'(
now it looks that only solution is to reflash, go to
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=7#regiona
or
http://forum.xda-developers.com/showthread.php?t=1113928
find something u like and flash it with odin.
http://forum.xda-developers.com/showthread.php?t=1110160&highlight=odin+how+to
dont bother wit finding of exact fw. for you, find something that is for your region....
Is it flash it by using odin?
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
borstri said:
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
Click to expand...
Click to collapse
After I flashed it, it turns to the CWM screen and install the Multi-csc..something like that..and it reboot..after it reboot..its still turns to CWM and install the multi-csc.
So what should I do now?
you have done something wrong, or taken wrong rom image, since after flashing with ODIN stock rom you WILL ENDUP with stock recovery! Dont know what you flashed, but it was not stock rom.
What rom you took exactly??
"GT-I9100_SIN_I9100DXKI2_I9100OLCKH1_I9100DXKI1"
I flash this..is this a boot loop or other problem?
Hey dude, thanks for helping me so much..
My phone is working now..but I have to download my things again..=(
Alright. Thanks!
no problem, been in that situation. check some custom roms when u have time....you'll be amazed what this device can do.
and in clockwork recovery you have backup and restore, setup phone just how you like it, make a CWM backup and you are always sure that rescue is there....don't need odin or PC for that.
Flash Supercore with odin as PDA or some other kernel that has CWM recovery
The problem occured again just now, its after i dpwnlpad some apps from market..and its still not completely remove the hanging problem..And my laptop died. LOL.
Anyone here?
May i sugest u reflash stock rom and return it to the store.
If u have random reboot after flashing stock rom there is obviouse something wrong with your device.
hi
my gs2 turns on and reboot repeatly when i put micro sd card and install app in sd card .
help me too .
sorry for bad english .
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
Your kernel is it also stock?
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
with odin
cm9
stock ics
stock gingerbread
lightening rom
through cwm recovery mode
slim ics
thebyani
resurrection roms
dynamic rom
hydrogen rom
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
speedmod
phenominal extreme
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
if i flash a rom on my phone then binary count is not increasing but when i install a kernel then it increases. why so?
i can format ,mount ,unmount anything on phone but i cant format the user data or do a factory reset while doing that my phone hangs.
i even tried .PIT file with repartition ticked in the odin.
please tell me as if there is any hardware problem or just a normal problem?
now,
my phone says
cant access to /system/csc/SEK/system/'. in recovery
WHAT DOES IT MEAN ???
can any 1 help me?
Hey guys i got my phone working..
The problem was with siyah 3.1rc6.
It was emmc bug..
Motherboard has been replaced under warranty..
I flashed the official gb firmware and older bootloader ,then reseted my binary counts with usb jig...
shubham.dhand said:
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
cm9 ,stock ics ,lightening rom through odin
slim ics , thebyani , resurrection roms through cwm mode
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
Click to expand...
Click to collapse
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
thanks buddy now i'm trying your advice.
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
now i'm doing as you said ,will tell you later that it worked or not..
thanks for your time and your valueable advice
yes my phome is i9100 and i waited for a long time.
Kaze105 said:
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
shubham.dhand said:
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
Click to expand...
Click to collapse
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
i did that.
JJEgan said:
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
Click to expand...
Click to collapse
i did as you said but it is not working.
i still cant format/data or factory reset before or after flashing/installing rom via cwm recovery or odin.
still the problem remains the same.i cant delete the user data or cant do factory reset
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
when i flash gb rom then after flashin there is a installation process in the phone in which it says that cant open data/recovery_log. something like this.
it happens so fast that i couldn't read that.
yeah i gone through these threads.
aHcVolle said:
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Click to expand...
Click to collapse
but should i go for flashing my phone with the .pit file?
Nooooooooooooo wait wait wait,don't ever touch pit files and repatition
i would try it but i hope it won't make your problems worse ...
[edit]
ok then not ...
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
flash with odin a firmware with 3 file.
Inviato dal mio Transformer Prime TF201 con Tapatalk 2
kedai said:
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yup i had siyah 3.1rc6 on my phone.
i tried to restore my nandroid backup but there is no effect on my problem.
how to know weather emmc is fine or currupted?
Try to mount it in CWM and connect it in linux computer and run fsck to check the eMMC. Windows chkdsk is no good.
And please try to remember, did you do this step: flash bad siyah rc6 then wipe/factory reset and get stuck?
if not, then the problem is different from those who flash bad rc6 (which is removed now and siyah is safe)
any thing is not working.
in every thread its written that if my phone goes in download mode and recovery mode then its soft bricked but then how can i unbrick my phone?
or is there any hardware problem?
i can mount and unmount every thing in recovery mode
i can format every thing but only user data cannot be formated,when ever i format/data or factory reset the phone hangs.
is there any other way of hard resetting i9100.?other than cwm recovery?
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Phistachio said:
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Click to expand...
Click to collapse
yup i tried .PIT file too.
tried older bootloader also.but there is no effect on my phone
Hello all,
I have an issue with my Samsung Galaxy Ace GT-5830i that is stuck in Android system recovery (3e) mode, and it seems there is no way to get it out of there.
- upon selecting wipe data/factory reset the device is stuck with one message "multicsc: src /system/csc/MTL/system/ ." and "Formatting /data..." bellow
- upon selecting apply zip from the SD card the installation always fails with various error messages (I tried to install cyanogen mod rom in an attempt to recover, but failed as well)
- upon selecting reboot now the whole screen disappears with only the "multicsc: src /system/csc/MTL/system/ ." message at the bottom of the screen and I need to remove the battery.
I will greatly appreciate if anyone on this forum could help with the issue, as I have search for possible solutions without any luck so far, and my phone appears to be bricked.
Thank you,
John
My guess is u still on stock recovery. Flashing cm rom or any other custom rom needs clockworkmod recovery, moroever theres no cm rom for s5830i yet.
For now u could try to reflash stock rom with odin. Theres a thread somewhere guiding howto do so for s5830i. Also do note that anything for original s5830 wont work on your s5830i.
Last but not least, do read more and understand what you're trying to do before u really hardbricked the poor thing.
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Samsung Ace s5830i Stuck on recovery
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
john.smith1972 said:
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Click to expand...
Click to collapse
DevDeep700 said:
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
Click to expand...
Click to collapse
Don't use nothing from GT-S5830 model your model is GT-S5830i
What's exactly your problem?
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
evilpiggy6172 said:
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
Click to expand...
Click to collapse
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Centrumgsm said:
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Click to expand...
Click to collapse
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
mahithm said:
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
Click to expand...
Click to collapse
Oh right, sorry. Forgot about the download mode combination. Why they found it necessary to change it for this one model, I'll never understand. Flashed it back to life, thanks
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Have you flashed a fresh rom?
PS: It's a WRONG SECTION
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Flash stock rom thru odin then from recovery mod Clear data and cache then reboot. [emoji4]
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Ghost1105 said:
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Click to expand...
Click to collapse
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
amolgosavi said:
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
I already tried that, still same
Hi,
So i wanted to upgrade my ICS Rooted to JB by flashing this ROM.
It said on CWM success! and i rebooted my phone. Then it only kept itself on boot screen (Written: Samsung Galaxy S2 GT-i9100 and the Warning triangle at the bottom) it never went forward. Then i open CWM and it says [E: Can't open /cache/recovery/last_log].
What do i do now?
Before i had Siyah 5.0.1 with S3Mods ROM .
I have even tried to Restore back to when i had S3Mods Rom but then it says md5 mismatch (or something like that, can't remeber)
As said: what can i do now to fix this?
And what could've cause this?
Thank you for any help!
PS. Also the CWM Layout seems to have changed, i had with my Siyah 6.2.0.1 (don't remeber exact either) now it says PhilZ Touch 3
CashAndPotatoes said:
Hi,
So i wanted to upgrade my ICS Rooted to JB by flashing this ROM.
It said on CWM success! and i rebooted my phone. Then it only kept itself on boot screen (Written: Samsung Galaxy S2 GT-i9100 and the Warning triangle at the bottom) it never went forward. Then i open CWM and it says [E: Can't open /cache/recovery/last_log].
What do i do now?
Before i had Siyah 5.0.1 with S3Mods ROM .
I have even tried to Restore back to when i had S3Mods Rom but then it says md5 mismatch (or something like that, can't remeber)
As said: what can i do now to fix this?
And what could've cause this?
Thank you for any help!
PS. Also the CWM Layout seems to have changed, i had with my Siyah 6.2.0.1 (don't remeber exact either) now it says PhilZ Touch 3
Click to expand...
Click to collapse
Try to boot into recovery and wipe data/do a factory reset.
If that does not help, try to flash the ROM again.
If that does not help, restore your nandroid backup of your previous (ICS) ROM.
Good luck !
It_ler said:
Try to boot into recovery and wipe data/do a factory reset.
If that does not help, try to flash the ROM again.
If that does not help, restore your nandroid backup of your previous (ICS) ROM.
Good luck !
Click to expand...
Click to collapse
Thanx, but nothing of that worked.
I did however re-flash my latest ROM (S3Mods ROM) and it did pass the boot, but i'll check now to see if anything has happened with my phone itself.
Thanx