edit, have what I need now.
The latter fastboot command I can do for you as my one max is rooted and unlocked
The first part I'd need a baby step by step haha don't really understand all the partitions
My device is UK unlocked running on o2 network
garyfl said:
The latter fastboot command I can do for you as my one max is rooted and unlocked
The first part I'd need a baby step by step haha don't really understand all the partitions
My device is UK unlocked running on o2 network
Click to expand...
Click to collapse
me neither ...
if i had a tool or manual how to provide all this stuff i would do this ... i am also unlocked and rooted
You don't know how happy I am to see you here working on s-off for this! I'm seriously hoping when I pick up my 2 Verizon One Max's that you will have them bootloader unlocked and/or s-off'd quickly. Donated to the Verizon One unlock and will donate to you again soon just for the additional work you always do.
EDIT: thought I would note that I donate in advance *without* any expectations. Just glad to see great work being done that can make things better...
HTC One MAX (emmc replies)
dev: size erasesize name
mmcblk0p21: 000ffa00 00000200 "misc"
mmcblk0p38: 00fffe00 00000200 "recovery"
mmcblk0p37: 01000000 00000200 "boot"
mmcblk0p39: 98000000 00000200 "system"
mmcblk0p28: 00140200 00000200 "local"
mmcblk0p41: 17fffe00 00000200 "cache"
mmcblk0p42: 2c0000000 00000200 "userdata"
mmcblk0p24: 01400000 00000200 "devlog"
mmcblk0p26: 00040000 00000200 "pdata"
mmcblk0p29: 00010000 00000200 "extra"
mmcblk0p34: 05000000 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p18: 00500000 00000200 "wcnss"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p22: 00400000 00000200 "modem_st1"
mmcblk0p23: 00400000 00000200 "modem_st2"
mmcblk0p31: 00040000 00000200 "skylink"
mmcblk0p32: 01900000 00000200 "carrier"
mmcblk0p30: 00100000 00000200 "cdma_record"
mmcblk0p20: 016ffc00 00000200 "reserve_1"
mmcblk0p35: 02fffc00 00000200 "reserve_2"
mmcblk0p36: 05fffc00 00000200 "reserve_3"
mmcblk0p40: 03fffa00 00000200 "reserve_4"
mmcblk0p33: 04729a00 00000200 "reserve"
Check your PM's please
navalynt said:
Check your PM's please
Click to expand...
Click to collapse
with this, I have what I need. Thanks everyone.
So you can bring SOFF to the One Max? That would be soo great!!
Gesendet von meinem HTC One X mit Tapatalk
so i think you could work on a method to get the fingerprint sensor work again too ?
Yeah,should
Gesendet von meinem HTC One X mit Tapatalk
S-OFF incoming? woot!!!, i just ordered my One MAX
pradeepvizz said:
S-OFF incoming? woot!!!, i just ordered my One MAX
Click to expand...
Click to collapse
Yep.
Sent from my HTC6435LVW using Tapatalk
D*fuq,you're the best mate!
Gesendet von meinem HTC One X mit Tapatalk
Universal version work for my Butterfly S :victory:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A big thank :good:
One Max too?
Gesendet von meinem HTC One X mit Tapatalk
TouchscreenLover1 said:
One Max too?
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
yes
Where to download, if it works with one max too? Or did I understand something wrong?
Gesendet von meinem HTC One mit Tapatalk
JohnnyGipsy said:
Where to download, if it works with one max too? Or did I understand something wrong?
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Works for the butterfly s too
Sent from my HTC Butterfly s using XDA Premium 4 mobile app
Works for one max too
B-Man2005 said:
Works for one max too
Click to expand...
Click to collapse
So your s off now
Sent from my HTC Butterfly s using XDA Premium 4 mobile app
Related
I've seen paolo's topic but it's only for 2.2 .anyone help me?
I can give u the important file of my custom rom for u (ex: framework-res and ??)
Please help me. Thanks a milion
Sent from my LG-P500 using xda premium
Its the same, the only change i remember is that line when says "now" you have to put ""
Roqu3 said:
Its the same, the only change i remember is that line when says "now" you have to put ""
Click to expand...
Click to collapse
Can u make it for me?? I'll give u the framework-res
Sent from my LG-P500 using xda premium
Roqu3 said:
Its the same, the only change i remember is that line when says "now" you have to put ""
Click to expand...
Click to collapse
Not just that Row, If you run the logcat you can see that in the META-INF folder, there is a file that has all SHA-1 code of image and icon (i don't know what is SHA-1 code), but the SHA-1 code of recovery icon and reboot icon is included. So we have to add those missing code
Sent from my LG-P500 using XDA
Dude sha-1 is algorithm and it is use for verify certificate.
So anyone can help me... (
Sent from my Kindle Fire using xda premium
vikasb32 said:
Dude sha-1 is algorithm and it is use for verify certificate.
Click to expand...
Click to collapse
OK, Thanks for explaining...
and cofirmed that SHA-1 Disget of icons are really missed... Found that in logcat!
You couldn't just copy the icons to drawable then add suitable id for them in public.xml.
Never got a problem with that, I made it one to my custom v20g and then again for my custom v20h, it's not that hard once you got it, in the other forum we (well my friend Karlen made the 99% of the work) also managed to port the screenshot option from cm7 to the custom stock ROM.
As for me, easy to make custom rom with power menu
ViTTT1991 said:
As for me, easy to make custom rom with power menu
Click to expand...
Click to collapse
Can u help me??
Sent from my LG-P500 using xda premium
cái này mình làm trên framework-res của LGVN , nếu bạn cần thì down về dùng ,mấy cai icon mình để màu xanh cho dễ nhìn, nếu thích bạn có thể thay lại màu trắng^^
http://www.box.com/s/a437ec02dd66b219fc01
myawan said:
Translate into english else I'll report this to mod
Click to expand...
Click to collapse
ah ! ok ! Google Translate
"I do this in the framework of LGVN-res, if you need it down on use, some settings icon to blue for easy to see, if you can replace the white ^ ^"
x-dira said:
cái này mình làm trên framework-res của LGVN , nếu bạn cần thì down về dùng ,mấy cai icon mình để màu xanh cho dễ nhìn, nếu thích bạn có thể thay lại màu trắng^^
http://www.box.com/s/a437ec02dd66b219fc01
Click to expand...
Click to collapse
Translate into english else I'll report this to mod
Sent from my LG-P500 using XDA App
Roqu3 said:
Never got a problem with that, I made it one to my custom v20g and then again for my custom v20h, it's not that hard once you got it, in the other forum we (well my friend Karlen made the 99% of the work) also managed to port the screenshot option from cm7 to the custom stock ROM.
Click to expand...
Click to collapse
Btw, i found out why i missed those SHA-1.
Sent from my LG-P500 using XDA
x-dira said:
cái này mình làm trên framework-res của LGVN , nếu bạn cần thì down về dùng ,mấy cai icon mình để màu xanh cho dễ nhìn, nếu thích bạn có thể thay lại màu trắng^^
http://www.box.com/s/a437ec02dd66b219fc01
ah ! ok ! Google Translate
"I do this in the framework of LGVN-res, if you need it down on use, some settings icon to blue for easy to see, if you can replace the white ^ ^"
Click to expand...
Click to collapse
LGVN??? My old ROM or Stock V20??
Sent from my LG-P500 using XDA
thachtunganh said:
LGVN??? My old ROM or Stock V20??
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Stock V20!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
x-dira said:
Stock V20!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Uh-K....
How did you do that, just follow the paolo guide? That's all?
Sent from my LG-P500 using XDA
thachtunganh said:
Uh-K....
How did you do that, just follow the paolo guide? That's all?
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
credit
untermensch (http://forum.xda-developers.com/showthread.php?t=811532)
paolo
bytecode
www.androidworld.it
....everyone
x-dira said:
cái này mình làm trên framework-res của LGVN , nếu bạn cần thì down về dùng ,mấy cai icon mình để màu xanh cho dễ nhìn, nếu thích bạn có thể thay lại màu trắng^^
http://www.box.com/s/a437ec02dd66b219fc01
ah ! ok ! Google Translate
"I do this in the framework of LGVN-res, if you need it down on use, some settings icon to blue for easy to see, if you can replace the white ^ ^"
Click to expand...
Click to collapse
Can i replace it for v20i framework??
Sent from my LG-P500 using xda premium
acax456 said:
Can i replace it for v20i framework??
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I dont know....guess... is ok
x-dira said:
I dont know....guess... is ok
Click to expand...
Click to collapse
Can u make it for me... i will give u v20i framework to make sure it'll work correctly
Sent from my LG-P500 using xda premium
Hello, i search for a idea how to backup ROM/Firmware from that phone. And how if possible to run on it ClockWorkMod.
I search for firmware/rom that work with this phone. Media-Tech/Media-Droid dont released any firmware for it.
All data what i get
BB Chip : MT6575
MS Board. : e1809c_v75_gq1008_9p017_media
Modem Ver. : MAUI.11AMD.W11.50.SP.V14, 2012/04/20
Build Time : 2012/07/06 19:02:23
UBoot Ver. : 2010.06
Kernel Ver. : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Jul 6 19:00:09 CST 2012
Android Ver. : 4.0.3
SW Ver. : ALPS.ICS.MP.V1.11
Custom Build Verno. : 1341572426
cat /proc/emmc
partno: start_sect nr_sects partition_name
emmc_p1: 00000020 00000002 "ebr1"
emmc_p2: 0010f720 00100000 "cache"
emmc_p3: 0020ff20 00100000 "usrdata"
emmc_p4: 00310720 004328e0 "fat"
emmc_p5: 00009f00 00002800 "sec_ro"
emmc_p6: 0000ef20 00100000 "android"
Phone is rooted.
Thanks for any info.
cr4shydlo said:
Phone is rooted.
Click to expand...
Click to collapse
How did you do that?
http://forum.xda-developers.com/showthread.php?t=1885776
Wysyłane z mojego MT7003 za pomocą Tapatalk 2
HI, EVERYONE
I tried cwmr from other vimicro vc88x variants like flypad6, hipad m8, hcl u1 and cwm online builder but it does not work with
my tab. It fails in mounting file system.
i am requisting cwm recovery for my tab.
I have included all information in zip file including
my stock recovery.
link:mediafire.com/?6gcj44vo1n25zlq (plz remove link: )
My Tab info:- BSNL Penta IS701C, Vimicro vc882, 512mb ram, 1ghz cpu, 7" tab
Hardware button:- vol up, vol down and power button
uid=0 [email protected]:/ # cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
mtd0: 00a00000 00100000 "SysInfo"
mtd1: 00c00000 00100000 "Uboot"
mtd2: 01400000 00100000 "kernel"
mtd3: 01400000 00100000 "RKer"
mtd4: 15e00000 00100000 "System"
mtd5: 25800000 00100000 "Data"
mtd6: 06400000 00100000 "Cache"
mtd7: ba700000 00100000 "user"
uid=0 [email protected]:/ # cat /proc/cpuinfo
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 929.79
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : Vimicro Vortex Board
Revision : 0000
Serial : 0000000000000000
uid=0 [email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
7 0 2531328 loop0
7 1 2111 loop1
7 2 2111 loop2
31 0 10240 mtdblock0
31 1 12288 mtdblock1
31 2 20480 mtdblock2
31 3 20480 mtdblock3
31 4 358400 mtdblock4
31 5 614400 mtdblock5
31 6 102400 mtdblock6
31 7 3054592 mtdblock7
179 0 15558144 mmcblk0
179 1 15016679 mmcblk0p1
179 2 530145 mmcblk0p2
254 0 2110 dm-0
254 1 2110 dm-1
uid=0 [email protected]:/ #
plz compile for my device when you have time or plz tell me how can i modify recovery.
thankx in advance.
really appriciate your valuable time.
i tried every possible modification in ramdisk but the result is same..
I think modifying sbin/recovery file in ramdisk will fix this problem. but when i open this file with notepad++ it shows garbage information.
Actually i made custome rom for this device and planning to post over net. if cwmr works for this device than everybody can easily flash this one.
again thank u for showing interest in my post.
WAITING FOR VALUABLE RESPONSE...
so;you get working cwm or not?
Sent from my GT-I5800 using Tapatalk 2
custom rom builds for Penta 701C
engineer_dhaval said:
HI, EVERYONE
I tried cwmr from other vimicro vc88x variants like flypad6, hipad m8, hcl u1 and cwm online builder but it does not work with
my tab. It fails in mounting file system.
i am requisting cwm recovery for my tab.
I have included all information in zip file including
my stock recovery.
link:mediafire.com/?6gcj44vo1n25zlq (plz remove link: )
My Tab info:- BSNL Penta IS701C, Vimicro vc882, 512mb ram, 1ghz cpu, 7" tab
Hardware button:- vol up, vol down and power button
uid=0 [email protected]:/ # cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
mtd0: 00a00000 00100000 "SysInfo"
mtd1: 00c00000 00100000 "Uboot"
mtd2: 01400000 00100000 "kernel"
mtd3: 01400000 00100000 "RKer"
mtd4: 15e00000 00100000 "System"
mtd5: 25800000 00100000 "Data"
mtd6: 06400000 00100000 "Cache"
mtd7: ba700000 00100000 "user"
uid=0 [email protected]:/ # cat /proc/cpuinfo
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 929.79
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : Vimicro Vortex Board
Revision : 0000
Serial : 0000000000000000
uid=0 [email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
7 0 2531328 loop0
7 1 2111 loop1
7 2 2111 loop2
31 0 10240 mtdblock0
31 1 12288 mtdblock1
31 2 20480 mtdblock2
31 3 20480 mtdblock3
31 4 358400 mtdblock4
31 5 614400 mtdblock5
31 6 102400 mtdblock6
31 7 3054592 mtdblock7
179 0 15558144 mmcblk0
179 1 15016679 mmcblk0p1
179 2 530145 mmcblk0p2
254 0 2110 dm-0
254 1 2110 dm-1
uid=0 [email protected]:/ #
plz compile for my device when you have time or plz tell me how can i modify recovery.
thankx in advance.
really appriciate your valuable time.
i tried every possible modification in ramdisk but the result is same..
I think modifying sbin/recovery file in ramdisk will fix this problem. but when i open this file with notepad++ it shows garbage information.
Actually i made custome rom for this device and planning to post over net. if cwmr works for this device than everybody can easily flash this one.
again thank u for showing interest in my post.
WAITING FOR VALUABLE RESPONSE...
Click to expand...
Click to collapse
Dear engineer_dhaval,
I have recently bought one of these at an ultralow price of Rs3299 (~US$ 56). It is a usable tablet but can be improved by removing
the many memory hungry applications it loads by default and doesn't allow killing them. As a result memory almost full most of the
time and it frequently crashes/freezes if many apps are used at the same time.
Total RAM 281MB Free RAM 60 MB Tablet Build no is 20120717
1) I see that you have posted a custom ROM for this tab but as a new user I am not allowed to post in that section of the forum.
Please inform if you have changed RAM allocation or freed up RAM in that ROM. I just want to get rid of skype, orkut, talk, gmail etc
which I don't use regularly.
2) Where do you get source codes to build a custom ROM and what is the procedure to build a custom ROM.
3) I have managed to root it with unlockroot. This tool does the job but a newer version of SuperSU has to be installed before everything
works correctly. SuperSU has to uninstalled by settings>apps>SuperSU>uninstall.
4) Penta has a new ROM version 20120918 for this tablet. Have they changed it for the better or worse. Is it worth downloading.
5) Have you managed to install some recovery to it so that tools like ROM Manager (Clockworkmod) can be used.
Thanks
VK Singh
ok.. for this tab u must flash my custom rom (recomanded)...
I used many tweak to improve ram utilization..
yes facebook, orkut, skyup, youtube works fine with my rom.
and if u want to revert back to stock rom u can easily do..
stock rom link also provided in my thread.
as now cwm recovery is not possible for this tab..
u must use titenium backup (included in custom rom) for backup & restore..
engineer_dhaval said:
ok.. for this tab u must flash my custom rom (recomanded)...
I used many tweak to improve ram utilization..
yes facebook, orkut, skyup, youtube works fine with my rom.
and if u want to revert back to stock rom u can easily do..
stock rom link also provided in my thread.
as now cwm recovery is not possible for this tab..
u must use titenium backup (included in custom rom) for backup & restore..
Click to expand...
Click to collapse
Hello engineer_dhaval,
1) Is there any way to take complete backup image of this tablet i.e. exact image of the internal 4gb memory chip which
will include all the system partitions & files. Someone has posted in the forum that new_201212xxAngryBirdsSpace driver
available on the Penta tech website uses a different method of firmware update by using MPTool.exe software. This tool
might be able to copy/restore the contents of internal 4GB memory. Please post the tool here if you have it as it is part of a
huge package (~475MB) and this driver is anyway incompatible with my older version tab.
2) I have tried ROM Toolbox, Titanium, Helium, ROM manager, TRUbackup, Online Nandroid etc and all fail to make a complete
"Nandroid" backup image as there is no compatible Recovery available. Some method of accessing the hardware while it is in
"debug mode" might do the trick.
3) Many users over the web have complained that this tab runs hot and has a very short battery life. Greenify app works surprising
good for saving power on this tablet. It allows hibernating most of the background apps.
4) In the version of ROM that you have posted, what is the amount of free RAM and Total RAM available on the tablet.
Best regards,
VK Singh
The amlogic 8726-mx device has a black screen because of the wrong firmware. The computer does not receive the worldcup even when the device is working properly (the computer still accepts other amlogic devices). Please help. Thank you in advance.
Photo of device
20210226 135514
Ảnh 20210226 135514 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
20210226 135540
Ảnh 20210226 135540 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
Help me, plz
12march said:
The amlogic 8726-mx device has a black screen because of the wrong firmware. The computer does not receive the worldcup even when the device is working properly (the computer still accepts other amlogic devices). Please help. Thank you in advance.
Photo of device
20210226 135514
Ảnh 20210226 135514 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
20210226 135540
Ảnh 20210226 135540 lưu trữ tại Up ảnh nhanh không cần tài khoản
www.upsieutoc.com
Click to expand...
Click to collapse
Mask Rom mode will probably be needed
aidanmacgregor said:
Mask Rom mode will probably be needed
Click to expand...
Click to collapse
Please give me detailed instructions
12march said:
Please give me detailed instructions
Click to expand...
Click to collapse
First step would be to figure out what NAND chip is in your device, then look here for the same or similar (same manufacturer often use same pins) to figure out the pins to short
NAND Chip Mask ROM Mode Short Location - FreakTab
Hi Everyone We have created this thread to collect all the NAND pin Short to Mask ROM Mode locations for all our members. Because firmware comes on android
forum.freaktab.com
When I erase entire Flash on QFIL ( Partion manager ) , PC connection only receives port " qualcomm hs-usb qdloader 9008 ", How to unbrick,Thank ( Sorry my english is not good )
PS : Done
After unbrick , imei phone =0 . Can you help me?
heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..
heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50
wibigdog said:
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50
Click to expand...
Click to collapse
Yes...with QFIL.....
agn8888 said:
Yes...with QFIL.....
Click to expand...
Click to collapse
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.
wibigdog said:
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.
Click to expand...
Click to collapse
I tried to follow this tutorial for LG G7 https://forum.xda-developers.com/t/how-to-recover-from-any-hardbrick-or-red-case-in-9008-mode-without-any-boxes.4052841/
Sadly, the rawprogam generator for V30 that they used have stopped working for newer models.
You need firehose to reload the modemst1 and modemst2.... with qfil...
firehose lg v50...
Hi, do you happen to check or verify what's hardware info on the soundcard of your V50S?
I've been looking to check if the Quad-DAC is from ESS or from Qualcom's.
agn8888 said:
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..
Click to expand...
Click to collapse
Many thanks to you kind person!!! I faced "no signal issue" on v50s after crossflash. I Used QFIL and flashed your fgs,modemst1 an modemst2 partitions and it works fine with v50s. I'm happy!
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com
Zenozero said:
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com
Click to expand...
Click to collapse
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
0. Consult the recovery method of lg v50 or other machine and find the program file to install. QFIL and LGUP or LG Drive.
1. go to load xml.
2. select the extracted lg backup file and select it
all .xml files select open
3. choose cancel
4. choose download
5. wait for it to load
6. When done, press the volume button - at the same time with the power button for about 12 seconds
release, wait 10 20 seconds if no response press again. If it is up, the logo will appear and then turn off. Press and hold volume + button to enter downloade mode and then go to lgup up to rom.
7. In LGUP when pressing Start, there will be a notice board, please select Yes.
Zenozero said:
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
Click to expand...
Click to collapse
It seems the file has been deleted.
Could you please update the link ?