I have a cheap Chinese tablet. Here is the model,
http://szstarfly.en.alibaba.com/pro...reen_Cheap_android_font_b_Tablet_b_font_.html
I was trying to install CWM on it as per http://forum.xda-developers.com/showthread.php?t=2189640 and it got soft bricked. If i try to reboot it it is always coming to CWM recovery. Also I see below error messages in CWM
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
It is Allwinner A13 cortex8 processor.
How do I restore it back or Load a working version of ROM to it?
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun5i
Revision : a13b
Serial : 06c19c6635373030504e59301625428d
[email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
93 0 26384 nanda
93 8 16384 nandb
93 16 32768 nandc
93 24 524288 nandd
93 32 1228800 nande
93 40 16384 nandf
93 48 32768 nandg
93 56 262144 nandh
93 64 262144 nandi
93 72 5330160 nandj
this is your tablet firmware most probably. A13_86ve_m707ebc.20130920
and it is available Here.
what password for the archive, please
hi
alexvovan said:
what password for the archive, please
Click to expand...
Click to collapse
what pssword for this
i cant open this
please send for me pass
password
hi plz password
i also have the same problem same model
the same problem its not getting flashed how to flash it
There is no password on the file.
most probably you have corrupted download.
Rar file required password.what is the password?
password for rar
have downloaded rar .for atouch a703 and it requires password to open pliz help with password
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
amir5569 said:
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
Click to expand...
Click to collapse
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
need stock room
fanáticomaniático said:
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
Click to expand...
Click to collapse
Hi,
My china tablet (momo9 3g) bootloop as I installed unicode font apk which not compatibility with this tablet. I need your help to get stock firmware from other source. Then I can flash with livesuit. I tried to download this stock rom, but no luck all link are dead. from My tablet detail was follow:
Android version: REL 4.2.2
onandroid script version: -1.0
Device: md706 alps alps MID
Contents of: /proc/partitions
major minor #blocks name
7 0 1254 loop0
7 1 8348 loop1
7 2 43691 loop2
7 3 15624 loop3
7 4 49928 loop4
7 5 13545 loop5
7 6 39533 loop6
7 7 19782 loop7
179 0 7613440 mmcblk0
179 1 1 mmcblk0p1
179 2 5120 mmcblk0p2
179 3 786432 mmcblk0p3
179 4 524288 mmcblk0p4
179 5 1048576 mmcblk0p5
179 6 5217376 mmcblk0p6
179 64 4096 mmcblk0boot1
179 32 4096 mmcblk0boot0
179 96 994816 mmcblk1
179 97 994691 mmcblk1p1
254 0 8347 dm-0
254 1 43690 dm-1
254 2 15624 dm-2
254 3 49927 dm-3
254 4 13545 dm-4
254 5 39532 dm-5
254 6 19782 dm-6
7 8 2111 loop8
254 7 2110 dm-7
7 9 3150 loop9
254 8 3150 dm-8
7 10 43691 loop10
254 9 43690 dm-9
7 11 31217 loop11
254 10 31216 dm-10
7 12 36414 loop12
254 11 36414 dm-11
7 13 3150 loop13
254 12 3150 dm-12
Actually My friend has same model and similar tablet. Also has root access (root with rootmaster). But we don't known how to get img from his tablet. Anyway to get img from this tablet? In working tablet we install nanoid backup online apk and tried to backup nanoid. But not support for md706 model. Also tried rom manager, titanium backup pro and my backup pro, but cannot backup img.
We had read "CWM Recovery 6.0.1.2 for Allwinner A10 LY-F1/TREQ Tablets" but not dare to try. Cos some device got bootloop.
Pls share your stock rom.
sorry for my english.
I have momo93g with stock 4.1.2 jb. If i can help, i will. I am also interested in custom recovery, rom or kernel with overclock.
amir5569 said:
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
Click to expand...
Click to collapse
hello i have a smartpad mp720m mediacom is the Italian version of your tablet but according to some research I did on the internet appears to be identical to the md706 of Chinese production.
I think you can find help at this link
http://www.mediacomeurope.it/Supporto/Dettaglio.aspx?XRI=2129#googtrans(it|en)
---------- Post added at 08:53 AM ---------- Previous post was at 08:37 AM ----------
I have a question for you ... can you tell me if the mac address of your wi-fi card changes every time you activate the connection and turn it off? My tablet ...... has this problem and I do not understand what's causing it.
When active the wi fi I get a mac I can see in the status menu, after I turned off and on the wi fi and update status I can see a new mac with the last 3 pairs of different numbers.
This new mac I can see it in my router in the list of connected users.
You can check if you have the same problem on your models?
thank you!
fanáticomaniático said:
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
Click to expand...
Click to collapse
Hi,i will be very glad if you can send this ROM to me, because i crashed mine
Hi,i will be very glad if you can send this ROM to me, because i crashed mine.my mail is [email protected]
ALPS MD706, 1.0 ghz procesor.
I need ROM (CM, AOKP, Stock) for NTT MD706 (link for firmware). Help! Please!
ROM for:
MD706B H V2 (4G + 512M + 1.0GHz Dual SIM)
Hello I bought this cheap device as a spare while my phone gets repaired. I dont know what brand it is
Its a Mediatek MT6735 based device with 2GB RAM, 128GB ROM and Android 6. The device arrived rooted which i want to switch off. And ideally I would like to upgrade to a newer ROM if possible. The device has a bootloader in Chinese.
Baseband version reports MOLY.R9.W1444.MD.LWTG.MP.V88.P60 and after googling it I found this repository on github with a lot of drivers https://github.com/bolt1502/MOLY.LR9.W1444.MD.LWTG.MP.V88
So will it be possible to do a new build with lineage os? Also flash TWRP on it?
Thanks
ToDo
I also have this phone. It's great but the charger wants to take 24 hrs. A Samsung one takes about 4 to 6. It's lying all over the specs.
Web says
6gb ram
10 core
Android 9.1
Actual is 2gb ram, 4 core, android 6.0.
However at 100 bucks it kicks ass.
The sound is a bit low for the ear piece.
I'd love to see a rom for this as well.
I've seen 'SP Flash tools' mentioned in another forum for flashing Media Tek 67xx
That should be a good start.
ToDo:
Get some higher audio level controls.
See why battery seems to drastically drain after 15-30%.
See why the stock charger takes 20+ hrs to charge.
Stock charger is 5v 2A.
Samsung charger is 5.3v 2A.
(If the volts does that... Finding higher volts will be useful.)
Make sure the second camera lens works.
(It has a flat and half sphere camera lens.
I've got no idea how to use the half sphere lens.)
Add over clocking to kernel.
Upgrade to Android 9.
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 11:09 AM ---------- Previous post was at 10:53 AM ----------
Partitions
/DATA 128GB
/SYSTEM 2GB
Code:
[email protected]_35_m0:/proc $ cat partitions
major minor #blocks name
7 0 1254 loop0
254 0 988448 zram0
179 0 30535680 mmcblk0
179 1 3072 mmcblk0p1
179 2 5120 mmcblk0p2
179 3 10240 mmcblk0p3
179 4 10240 mmcblk0p4
179 5 512 mmcblk0p5
179 6 512 mmcblk0p6
179 7 16384 mmcblk0p7
179 8 16384 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 10240 mmcblk0p10
179 11 512 mmcblk0p11
179 12 2048 mmcblk0p12
179 13 6144 mmcblk0p13
179 14 8192 mmcblk0p14
179 15 5120 mmcblk0p15
179 16 5120 mmcblk0p16
179 17 1024 mmcblk0p17
179 18 32768 mmcblk0p18
179 19 37888 mmcblk0p19
179 20 2048000 mmcblk0p20
179 21 409600 mmcblk0p21
179 22 27880960 mmcblk0p22
179 23 16384 mmcblk0p23
179 96 4096 mmcblk0rpmb
179 64 4096 mmcblk0boot1
179 32 4096 mmcblk0boot0
179 128 15558144 mmcblk1
179 129 15554048 mmcblk1p1
253 0 2031836 dm-0
253 1 27880960 dm-1
MODULES
mt-snd-card
Its a Mediatek MT6735 based device with 2GB RAM, 128GB ROM and Android 6.0
Queria fazer root no meu, ele é exatamente assim alguem sabe?
Root
We're seeing what is possible.
Are there any generic root tools that you know of?
I'd love to get a new ROM and overclock.
I have confirmed this device as 32GB.
Someone wrote either a Linux module or something similar for storage to trick a user.
1 it pretends 128gb is the total size for a 32gb storage device.
2 when used space reaches 28gb or so it simply says it's 100% full.
This is full on trying to trick users by modifying code.
Now I will write an app for detection of hardware specs fraud.
---------- Post added at 07:02 PM ---------- Previous post was at 06:58 PM ----------
Note: it's still an unbeatable phone for 100 dollars.
So actual specs are:
Mediatek 4 cores @ 1.3 GHz Max
2gb ram
32 gb storage
Android 6.0 Marshmallow
Store and details specs:
10 core
6gb ram
128gb storage
Android 9.1
FarmaRoot 1.9.3 does not work on this device to root.
This is a chance to crack down on these practices.
The estimated battery mAh is about 3000.
Although advertised at 6000 mAh.
It lasts about 7 hours of continuous use.
Privacy Protection Password - X23
Thank you for all this information.
I bought this X23 phone in May, 2019 and start using it. But, from last 4 days when ever I unlock the phone by fingerprint, the popup add came on screen. Then I decided to reset the phone. As soon as I reset the phone and it bootup, its asking me for PRIVACY PROTECTION PASSWOD.
Its even don't let me do any thing, the first thing when you turn on the phone came up is asking for that password.
Please advice me what to do.
Thanks.
X23 Spec
X23 Software Ver: alps-mp-m0. mpl-v2. 84_tek6735. 35. m0_p151
It seems this war will never end. Android vs iOS - which OS is still better?
got this phone on w*sh as fraud since advertised as 10 core, 128gb, 6gb ram etc as everyone. €100 are A LOT compared to other older phones with 6.0 and 3g only. It should cost 50% less...
Anyhow, antutu says is a fake Alps X23, so if someone knows a thread about it maybe it can be updated...
Can anyone help with rooting Hisense INFINITY H12 Lite (also known as Hisense F35) please????
Diomorgan said:
got this phone on w*sh as fraud since advertised as 10 core, 128gb, 6gb ram etc as everyone. €100 are A LOT compared to other older phones with 6.0 and 3g only. It should cost 50% less...
Anyhow, antutu says is a fake Alps X23, so if someone knows a thread about it maybe it can be updated...
Click to expand...
Click to collapse
I got my money back from Wish for this phone.
I still have the thing though. I'm looking to put another updated ROM on it.
Any ideas what will work and where to start?
Ian_Cog said:
I got my money back from Wish for this phone.
I still have the thing though. I'm looking to put another updated ROM on it.
Any ideas what will work and where to start?
Click to expand...
Click to collapse
same here, but I'm looking for custom or original rom, since alp was pretty famous ansìd antutu told me exactly it's an alp x23
p.s.:When I reset the phone it start without the classic google login screen, I'm afraid of spyware inside.Maybe a recovery reset could be done, but how?
I'm trying an antivirus right now....
Firmware Backup ROM
Ca5c4d3 said:
Hello I bought this cheap device as a spare while my phone gets repaired. I dont know what brand it is
Its a Mediatek MT6735 based device with 2GB RAM, 128GB ROM and Android 6. The device arrived rooted which i want to switch off. And ideally I would like to upgrade to a newer ROM if possible. The device has a bootloader in Chinese.
Baseband version reports MOLY.R9.W1444.MD.LWTG.MP.V88.P60 and after googling it I found this repository on github with a lot of drivers
So will it be possible to do a new build with lineage os? Also flash TWRP on it?
Thanks
Click to expand...
Click to collapse
Hi, can you help? Please fill in the Firmware. I forgot to backup, now I'm sitting with Brick. Please help ..
Here is full factory firmware of the device:
Firmware Information
Code:
Android
tek6735_35_m0
MT6735
full_tek6735_35_m0
6.0
11-4-2019 2:10:42
alps-mp-m0.mp1-V2.84_tek6735.35.m0_P151
X23
Supported Boot Loader HW:
FlashID 0 CID: 90014A484147346132, Name: HAG4a2, Vendor: 90, HYNIX
FlashID 1 CID: 150100523331424D42, Name: R31BMB, Vendor: 15, SAMSUNG
FlashID 2 CID: 150100524531424D42, Name: RE1BMB, Vendor: 15, SAMSUNG
FlashID 3 CID: 90014A484147326505, Name: HAG2e, Vendor: 90, HYNIX
FlashID 4 CID: 150100523331424142, Name: R31BAB, Vendor: 15, SAMSUNG
FlashID 5 CID: 150100474536424D42, Name: GE6BMB, Vendor: 15, SAMSUNG
FlashID 6 CID: 90014A484247346505, Name: HBG4e, Vendor: 90, HYNIX
FlashID 7 CID: 15010051345A334D42, Name: Q4Z3MB, Vendor: 15, SAMSUNG
FlashID 8 CID: 150100515831334D42, Name: QX13MB, Vendor: 15, SAMSUNG
Device Memory Details:
RAM: 2 GB
ROM: eMMC 32 GB
Manufacturer: SAMSUNG
Name: BM3Z4
Build Properties
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MRA58K
ro.build.version.incremental=1554948341
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0
ro.build.version.security_patch=2018-01-05
ro.build.version.base_os=
ro.build.date=2019ه¹´ 04وœˆ 11و—¥ وکںوœںه›› 10:10:42 CST
ro.build.date.utc=1554948642
ro.build.type=user
ro.build.user=ylh-hdf253
ro.build.host=server253
ro.build.tags=test-keys
ro.build.flavor=full_tek6735_35_m0-user
ro.product.model=X23
ro.product.brand=Android
ro.product.name=full_tek6735_35_m0
ro.product.device=tek6735_35_m0
ro.product.board=
ro.build.display.id=M308_JX_R16_Android_X23_6.0_V01_AND_YC_11042019
ro.build.display.id.custom=M308_JX_R16_Android_X23_6.0_V01_AND_YC_11042019
persist.sys.hrf.brand=Android
persist.sys.hrf.model=X23
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=X23
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=mt6735
# ro.build.product is obsolete; use ro.product.device
ro.build.product=tek6735_35_m0
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=full_hy6580_we_m-user 6.0 MRA58K 1545278126 release-keys
ro.build.fingerprint=alps/full_hy6580_we_m/hy6580_we_m:6.0/MRA58K/1545278126:user/release-keys
ro.build.characteristics=default
# end build properties
#
# from device/teksun/tek6735_35_m0/system.prop
#
#
# system.prop for generic sdk
#
rild.libpath=mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=196608
#ro.kernel.qemu=1
#ro.kernel.qemu.gles=0
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
# temporary enables NAV bar (soft keys)
qemu.hw.mainkeys=0
ro.kernel.zio=38,108,105,16
#ro.kernel.qemu=1
#ro.kernel.qemu.gles=0
#ro.boot.selinux=disable
# Disable dirty region for Mali
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
# performance
ro.mtk_perf_simple_start_win=1
ro.mtk_perf_response_time=1
# add by hrf ylh
##add for shutanimation
#ro.operator.optr=CUST
#camera
persist.sys.hdfcameraf=1
persist.sys.hdfcamerab=1
#lcd
persist.sys.hdflcd=5
persist.sys.hrf.brand_model=0
persist.sys.bootanimation=0
###؟ح»§ذق¸ؤؤ¬بدcpu,rom,ram²خت####################################################################
##################################################################################################
####تض¶¯ذق¸ؤؤ¬بد²ختت±ص⼸¸ِ²خت±طذëpersist.sys.hdfram=0,persist.sys.hdfrom=0,persist.sys.hdfcpu=0
#دآأو¼¸¸ِ²خت؟ح»§؟ةزشتض¶¯ذق¸ؤ,ؤ¬بدصوتµؤع´و؛حcpu²خت
#±ببçتض¶¯ذق¸ؤram=8GB,؛حrom=128GB,cpu=وçءْ845 core=8؛ث clock=2.8GHZ
##################################################################################################
###########################ثµأ÷صâب¸ِ²خت±طذëتا0,؛َأو²»ؤـسذ؟ص¸ٌ###################################
#persist.sys.hdfram=0
#persist.sys.hdfrom=0
#persist.sys.hdfcpu=0
##########################ثµأ÷صâب¸ِ²خت,؛َأو²»ؤـسذ؟ص¸ٌ###########################################
#ro.hdf.cpupara=وçءْ845
#ro.hdf.cpucore=8
#ro.hdf.cpuclock=2.8GHZ
############################±طذëتاGB½لخ²,؛َأو²»ؤـسذ؟ص¸ٌ###########################################
#ro.hdf.rampara=8GB
#ro.hdf.rompara=128GB
##################################################################################################
#Memory
persist.sys.hdfram=4
persist.sys.hdfrom=4
#cpu
persist.sys.hdfcpu=8
ro.hdf.cpupara=MT6735
ro.hdf.cpucore=4
ro.hdf.cpuclock=1300Hz
ro.hdf.rampara=2GB
ro.hdf.rompara=32GB
#######################°²حأحأإـ·ض#########################
persist.sys.hdfpercent=95
persist.sys.hdfscore=302380
###############begin##########################
#shuidi lcd
persist.sys.hrf.shuidilcd=1
#0->default,1->2G,2->3G,3->4G
persist.sys.hdf.fake4g=3
###############android sdk####################
persist.sys.hdf.androidsdk=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
ro.mediatek.chip_ver=S01
ro.mediatek.platform=MT6735
ro.telephony.sim.count=2
persist.radio.default.sim=0
persist.radio.multisim.config=dsds
ro.MY_face_lock=1
persist.gemini.sim_num=2
ro.gemini.smart_sim_switch=false
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.mtk_cam_lomo_support=1
ro.sf.hwrotation=0
curlockscreen=0
ro.mediatek.gemini_support=true
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=0
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=CONSYS_MT6735
mediatek.wlan.module.postfix=_consys_mt6735
ril.read.imsi=1
ril.radiooff.poweroffMD=0
ro.frp.pst=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
ro.sys.usb.storage.type=mtp,mass_storage
ro.mediatek.version.branch=alps-mp-m0.mp1
ro.mediatek.version.release=alps-mp-m0.mp1-V2.84_tek6735.35.m0_P151
ro.mediatek.version.sdk=4
ro.mtk_gemini_support=1
persist.radio.gemini_support=1
ril.current.share_modem=2
ro.mtk_audio_profiles=1
ro.mtk_audenh_support=1
ro.mtk_besloudness_support=1
ro.mtk_bessurround_support=1
ro.mtk_bt_support=1
ro.mtk_wappush_support=1
ro.mtk_agps_app=1
ro.mtk_voice_ui_support=1
ro.mtk_voice_unlock_support=1
ro.mtk_voice_contact_support=1
ro.mtk_audio_tuning_tool_ver=V1
ro.mtk_wlan_support=1
ro.mtk_gps_support=1
ro.mtk_omacp_support=1
ro.mtk_search_db_support=1
ro.mtk_dialer_search_support=1
ro.mtk_dhcpv6c_wifi=1
ro.have_aacencode_feature=1
ro.mtk_fd_support=1
ro.mtk_oma_drm_support=1
ro.mtk_cta_drm_support=1
ro.mtk_widevine_drm_l3_support=1
ro.mtk_eap_sim_aka=1
ro.mtk_fm_recording_support=1
ro.mtk_audio_ape_support=1
ro.mtk_flv_playback_support=1
ro.mtk_wmv_playback_support=1
ro.mtk_send_rr_support=1
ro.mtk_emmc_support=1
ro.mtk_tetheringipv6_support=1
ro.mtk_shared_sdcard=1
ro.mtk_enable_md1=1
ro.mtk_nfc_addon_support=1
ro.mtk_flight_mode_power_off_md=1
ro.mtk_pq_support=2
ro.mtk_miravision_support=1
ro.mtk_miravision_image_dc=1
ro.mtk_wfd_support=1
ro.mtk_wfd_sink_support=1
ro.mtk_wfd_sink_uibc_support=1
ro.mtk_wifi_mcc_support=1
ro.mtk_beam_plus_support=1
ro.mtk_sim_hot_swap=1
ro.mtk_thumbnail_play_support=1
ro.mtk_bip_scws=1
ro.mtk_world_phone_policy=0
ro.mtk_perfservice_support=1
ro.mtk_sim_hot_swap_common_slot=1
ro.mtk_cta_set=1
ro.mtk_mobile_management=1
ro.mtk_antibricking_level=2
ro.mtk_cam_mfb_support=3
ro.mtk_slow_motion_support=1
ro.mtk_cam_vfb=1
ro.mtk_rild_read_imsi=1
ro.sim_refresh_reset_by_modem=1
ro.mtk_passpoint_r1_support=1
ro.mtk_privacy_protection_lock=1
ro.mtk_bg_power_saving_support=1
ro.mtk_bg_power_saving_ui=1
ro.mtk_wifiwpsp2p_nfc_support=1
ro.have_aee_feature=1
ro.sim_me_lock_mode=0
ro.mtk_dual_mic_support=0
ro.mtk_is_tablet=0
ro.nfc.port=I2C
ro.mtk_voice_extension_support=1
wfd.dummy.enable=1
ro.mediatek.project.path=device/teksun/tek6735_35_m0
persist.mtk.wcn.combo.chipid=-1
service.wcn.driver.ready=no
service.wcn.coredump.mode=2
ro.com.android.mobiledata=false
persist.radio.mobile.data=0,0
persist.meta.dumpdata=0
ro.mtk_hetcomm_support=1
mtk.vdec.waitkeyframeforplay=1
ro.setupwizard.mode=DISABLE
ro.com.google.clientidbase=android
ro.com.google.gmsversion=6.0_r5
persist.sys.dalvik.vm.lib.2=libart
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.expect.recovery_id=0x9f985baade79d9a030c82b99a4beaeb894b76caf000000000000000000000000
https://mega.nz/file/DRpjyQSJ#MN28CCoMzjJ_HlKdZdOUJiZj8hkxYHF3y1rzvADn140
Even this forum became useless and full of lazy and ignorant people!
Leonelle said:
Here is full factory firmware of the device:
Firmware Information
Even this forum became useless and full of lazy and ignorant people!
Click to expand...
Click to collapse
Thanks. The firmware came up, but the touchscreen doesn't work correctly. it is divided into several parts, half of it works as a mirror, you click there, the screen perceives a different place. Is there a way out, I read in the forums, they say LK. BIN is needed, but not having the original LK. BIN does not solve the problem. Or is there a method for Calibrating the touchscreen?
Ойбек said:
Thanks. The firmware came up, but the touchscreen doesn't work correctly. it is divided into several parts, half of it works as a mirror, you click there, the screen perceives a different place. Is there a way out, I read in the forums, they say LK. BIN is needed, but not having the original LK. BIN does not solve the problem. Or is there a method for Calibrating the touchscreen?
Click to expand...
Click to collapse
If you have touch issue you need to flash "lk.bin" and "secro.img" of your original device, because before you flashing the embedded firmware of the link above, you have to backup the original device partitions, otherwise just flash "system.img", "boot.img" and "recovery.img" (you need to flash "cache.img" and "userdata.img" too) of the mentioned firmware I've attached
---------- Post added at 07:20 PM ---------- Previous post was at 07:08 PM ----------
I have an idea it may work, you can search for:
Code:
tek6735_35_m0
or
Code:
alps-mp-m0.mp1-V2.84_tek6735.35.m0_P151
firmware and just flash "lk.bin" and "secro.img" with "userdata.img" and "cache.img"
Leonelle said:
If you have touch issue you need to flash "lk.bin" and "secro.img" of your original device, because before you flashing the embedded firmware of the link above, you have to backup the original device partitions, otherwise just flash "system.img", "boot.img" and "recovery.img" (you need to flash "cache.img" and "userdata.img" too) of the mentioned firmware I've attached
---------- Post added at 07:20 PM ---------- Previous post was at 07:08 PM ----------
I have an idea it may work, you can search for:
Code:
tek6735_35_m0
or
Code:
alps-mp-m0.mp1-V2.84_tek6735.35.m0_P151
firmware and just flash "lk.bin" and "secro.img" with "userdata.img" and "cache.img"
Click to expand...
Click to collapse
I had a brick and the only way out of the situation was to find a firmware for my device. Thank you for upload the necessary firmware. I searched the Internet for your advice, but I haven't found any results yet.
Here is the display touchscreen model: FPC-XL0600870I1
Maybe flashing HUAWEI Y6 Pro （same specs ）rom will work?
https://www.google.com/url?sa=t&sou...IwAXoECAoQAQ&usg=AOvVaw0Pe6r6buxk1AcVtmDYPdS-[/URL]