anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
amir5569 said:
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
Click to expand...
Click to collapse
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
need stock room
fanáticomaniático said:
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
Click to expand...
Click to collapse
Hi,
My china tablet (momo9 3g) bootloop as I installed unicode font apk which not compatibility with this tablet. I need your help to get stock firmware from other source. Then I can flash with livesuit. I tried to download this stock rom, but no luck all link are dead. from My tablet detail was follow:
Android version: REL 4.2.2
onandroid script version: -1.0
Device: md706 alps alps MID
Contents of: /proc/partitions
major minor #blocks name
7 0 1254 loop0
7 1 8348 loop1
7 2 43691 loop2
7 3 15624 loop3
7 4 49928 loop4
7 5 13545 loop5
7 6 39533 loop6
7 7 19782 loop7
179 0 7613440 mmcblk0
179 1 1 mmcblk0p1
179 2 5120 mmcblk0p2
179 3 786432 mmcblk0p3
179 4 524288 mmcblk0p4
179 5 1048576 mmcblk0p5
179 6 5217376 mmcblk0p6
179 64 4096 mmcblk0boot1
179 32 4096 mmcblk0boot0
179 96 994816 mmcblk1
179 97 994691 mmcblk1p1
254 0 8347 dm-0
254 1 43690 dm-1
254 2 15624 dm-2
254 3 49927 dm-3
254 4 13545 dm-4
254 5 39532 dm-5
254 6 19782 dm-6
7 8 2111 loop8
254 7 2110 dm-7
7 9 3150 loop9
254 8 3150 dm-8
7 10 43691 loop10
254 9 43690 dm-9
7 11 31217 loop11
254 10 31216 dm-10
7 12 36414 loop12
254 11 36414 dm-11
7 13 3150 loop13
254 12 3150 dm-12
Actually My friend has same model and similar tablet. Also has root access (root with rootmaster). But we don't known how to get img from his tablet. Anyway to get img from this tablet? In working tablet we install nanoid backup online apk and tried to backup nanoid. But not support for md706 model. Also tried rom manager, titanium backup pro and my backup pro, but cannot backup img.
We had read "CWM Recovery 6.0.1.2 for Allwinner A10 LY-F1/TREQ Tablets" but not dare to try. Cos some device got bootloop.
Pls share your stock rom.
sorry for my english.
I have momo93g with stock 4.1.2 jb. If i can help, i will. I am also interested in custom recovery, rom or kernel with overclock.
amir5569 said:
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
Click to expand...
Click to collapse
hello i have a smartpad mp720m mediacom is the Italian version of your tablet but according to some research I did on the internet appears to be identical to the md706 of Chinese production.
I think you can find help at this link
http://www.mediacomeurope.it/Supporto/Dettaglio.aspx?XRI=2129#googtrans(it|en)
---------- Post added at 08:53 AM ---------- Previous post was at 08:37 AM ----------
I have a question for you ... can you tell me if the mac address of your wi-fi card changes every time you activate the connection and turn it off? My tablet ...... has this problem and I do not understand what's causing it.
When active the wi fi I get a mac I can see in the status menu, after I turned off and on the wi fi and update status I can see a new mac with the last 3 pairs of different numbers.
This new mac I can see it in my router in the list of connected users.
You can check if you have the same problem on your models?
thank you!
fanáticomaniático said:
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
Click to expand...
Click to collapse
Hi,i will be very glad if you can send this ROM to me, because i crashed mine
Hi,i will be very glad if you can send this ROM to me, because i crashed mine.my mail is [email protected]
ALPS MD706, 1.0 ghz procesor.
I need ROM (CM, AOKP, Stock) for NTT MD706 (link for firmware). Help! Please!
ROM for:
MD706B H V2 (4G + 512M + 1.0GHz Dual SIM)
Related
HI, EVERYONE
I tried cwmr from other vimicro vc88x variants like flypad6, hipad m8, hcl u1 and cwm online builder but it does not work with
my tab. It fails in mounting file system.
i am requisting cwm recovery for my tab.
I have included all information in zip file including
my stock recovery.
link:mediafire.com/?6gcj44vo1n25zlq (plz remove link: )
My Tab info:- BSNL Penta IS701C, Vimicro vc882, 512mb ram, 1ghz cpu, 7" tab
Hardware button:- vol up, vol down and power button
uid=0 [email protected]:/ # cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
mtd0: 00a00000 00100000 "SysInfo"
mtd1: 00c00000 00100000 "Uboot"
mtd2: 01400000 00100000 "kernel"
mtd3: 01400000 00100000 "RKer"
mtd4: 15e00000 00100000 "System"
mtd5: 25800000 00100000 "Data"
mtd6: 06400000 00100000 "Cache"
mtd7: ba700000 00100000 "user"
uid=0 [email protected]:/ # cat /proc/cpuinfo
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 929.79
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : Vimicro Vortex Board
Revision : 0000
Serial : 0000000000000000
uid=0 [email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
7 0 2531328 loop0
7 1 2111 loop1
7 2 2111 loop2
31 0 10240 mtdblock0
31 1 12288 mtdblock1
31 2 20480 mtdblock2
31 3 20480 mtdblock3
31 4 358400 mtdblock4
31 5 614400 mtdblock5
31 6 102400 mtdblock6
31 7 3054592 mtdblock7
179 0 15558144 mmcblk0
179 1 15016679 mmcblk0p1
179 2 530145 mmcblk0p2
254 0 2110 dm-0
254 1 2110 dm-1
uid=0 [email protected]:/ #
plz compile for my device when you have time or plz tell me how can i modify recovery.
thankx in advance.
really appriciate your valuable time.
i tried every possible modification in ramdisk but the result is same..
I think modifying sbin/recovery file in ramdisk will fix this problem. but when i open this file with notepad++ it shows garbage information.
Actually i made custome rom for this device and planning to post over net. if cwmr works for this device than everybody can easily flash this one.
again thank u for showing interest in my post.
WAITING FOR VALUABLE RESPONSE...
so;you get working cwm or not?
Sent from my GT-I5800 using Tapatalk 2
custom rom builds for Penta 701C
engineer_dhaval said:
HI, EVERYONE
I tried cwmr from other vimicro vc88x variants like flypad6, hipad m8, hcl u1 and cwm online builder but it does not work with
my tab. It fails in mounting file system.
i am requisting cwm recovery for my tab.
I have included all information in zip file including
my stock recovery.
link:mediafire.com/?6gcj44vo1n25zlq (plz remove link: )
My Tab info:- BSNL Penta IS701C, Vimicro vc882, 512mb ram, 1ghz cpu, 7" tab
Hardware button:- vol up, vol down and power button
uid=0 [email protected]:/ # cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
mtd0: 00a00000 00100000 "SysInfo"
mtd1: 00c00000 00100000 "Uboot"
mtd2: 01400000 00100000 "kernel"
mtd3: 01400000 00100000 "RKer"
mtd4: 15e00000 00100000 "System"
mtd5: 25800000 00100000 "Data"
mtd6: 06400000 00100000 "Cache"
mtd7: ba700000 00100000 "user"
uid=0 [email protected]:/ # cat /proc/cpuinfo
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 929.79
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : Vimicro Vortex Board
Revision : 0000
Serial : 0000000000000000
uid=0 [email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
7 0 2531328 loop0
7 1 2111 loop1
7 2 2111 loop2
31 0 10240 mtdblock0
31 1 12288 mtdblock1
31 2 20480 mtdblock2
31 3 20480 mtdblock3
31 4 358400 mtdblock4
31 5 614400 mtdblock5
31 6 102400 mtdblock6
31 7 3054592 mtdblock7
179 0 15558144 mmcblk0
179 1 15016679 mmcblk0p1
179 2 530145 mmcblk0p2
254 0 2110 dm-0
254 1 2110 dm-1
uid=0 [email protected]:/ #
plz compile for my device when you have time or plz tell me how can i modify recovery.
thankx in advance.
really appriciate your valuable time.
i tried every possible modification in ramdisk but the result is same..
I think modifying sbin/recovery file in ramdisk will fix this problem. but when i open this file with notepad++ it shows garbage information.
Actually i made custome rom for this device and planning to post over net. if cwmr works for this device than everybody can easily flash this one.
again thank u for showing interest in my post.
WAITING FOR VALUABLE RESPONSE...
Click to expand...
Click to collapse
Dear engineer_dhaval,
I have recently bought one of these at an ultralow price of Rs3299 (~US$ 56). It is a usable tablet but can be improved by removing
the many memory hungry applications it loads by default and doesn't allow killing them. As a result memory almost full most of the
time and it frequently crashes/freezes if many apps are used at the same time.
Total RAM 281MB Free RAM 60 MB Tablet Build no is 20120717
1) I see that you have posted a custom ROM for this tab but as a new user I am not allowed to post in that section of the forum.
Please inform if you have changed RAM allocation or freed up RAM in that ROM. I just want to get rid of skype, orkut, talk, gmail etc
which I don't use regularly.
2) Where do you get source codes to build a custom ROM and what is the procedure to build a custom ROM.
3) I have managed to root it with unlockroot. This tool does the job but a newer version of SuperSU has to be installed before everything
works correctly. SuperSU has to uninstalled by settings>apps>SuperSU>uninstall.
4) Penta has a new ROM version 20120918 for this tablet. Have they changed it for the better or worse. Is it worth downloading.
5) Have you managed to install some recovery to it so that tools like ROM Manager (Clockworkmod) can be used.
Thanks
VK Singh
ok.. for this tab u must flash my custom rom (recomanded)...
I used many tweak to improve ram utilization..
yes facebook, orkut, skyup, youtube works fine with my rom.
and if u want to revert back to stock rom u can easily do..
stock rom link also provided in my thread.
as now cwm recovery is not possible for this tab..
u must use titenium backup (included in custom rom) for backup & restore..
engineer_dhaval said:
ok.. for this tab u must flash my custom rom (recomanded)...
I used many tweak to improve ram utilization..
yes facebook, orkut, skyup, youtube works fine with my rom.
and if u want to revert back to stock rom u can easily do..
stock rom link also provided in my thread.
as now cwm recovery is not possible for this tab..
u must use titenium backup (included in custom rom) for backup & restore..
Click to expand...
Click to collapse
Hello engineer_dhaval,
1) Is there any way to take complete backup image of this tablet i.e. exact image of the internal 4gb memory chip which
will include all the system partitions & files. Someone has posted in the forum that new_201212xxAngryBirdsSpace driver
available on the Penta tech website uses a different method of firmware update by using MPTool.exe software. This tool
might be able to copy/restore the contents of internal 4GB memory. Please post the tool here if you have it as it is part of a
huge package (~475MB) and this driver is anyway incompatible with my older version tab.
2) I have tried ROM Toolbox, Titanium, Helium, ROM manager, TRUbackup, Online Nandroid etc and all fail to make a complete
"Nandroid" backup image as there is no compatible Recovery available. Some method of accessing the hardware while it is in
"debug mode" might do the trick.
3) Many users over the web have complained that this tab runs hot and has a very short battery life. Greenify app works surprising
good for saving power on this tablet. It allows hibernating most of the background apps.
4) In the version of ROM that you have posted, what is the amount of free RAM and Total RAM available on the tablet.
Best regards,
VK Singh
plz help me i need cwm for my karbon a27+...if posibble den custome rom too...plzz
Android version: REL 4.1.2
onandroid script version: 9.2
Device: mbk77_twn_cu_jb Karbonn Karbonn Karbonn A27+
Contents of: /proc/partitions
major minor #blocks name
7 0 1254 loop0
7 1 16664 loop1
7 2 18743 loop2
7 3 8348 loop3
7 4 12506 loop4
7 5 4190 loop5
7 6 12506 loop6
179 0 3763200 mmcblk0
179 1 1 mmcblk0p1
179 2 5120 mmcblk0p2
179 3 540672 mmcblk0p3
179 4 524288 mmcblk0p4
179 5 1068032 mmcblk0p5
179 6 1593440 mmcblk0p6
179 64 2048 mmcblk0boot1
179 32 2048 mmcblk0boot0
179 96 7761920 mmcblk1
179 97 7757824 mmcblk1p1
254 0 16663 dm-0
254 1 18742 dm-1
254 2 8347 dm-2
254 3 12505 dm-3
254 4 4189 dm-4
254 5 12505 dm-5
Go on the Clocwork Mod site, download the version of the recovery that you want and flash it using Odin
Sent from my GT-S5310 using XDA Premium 4 mobile app
I dnt knw which version suit to karbon a27+?Plz help me which version of clockwork mode to download for karbon a27+...
Try to get a non-touch version
Sent from my GT-S5310 using XDA Premium 4 mobile app
thank u for helping me.Plz one more help can say any version of cwm can b installed in any smarthphone?
Yes i any version of cmw can be installed in any smartphone using odin but if you do not know which version to download try dowloading and flashing a non touch version
Sent from my GT-S5310 using XDA Premium 4 mobile app
1st of all thank u vry much for helpng me..
Whenever I flash recovery on my smartphon through Aio Flasher in fastboot mode I used to get error msg saying dat
PARTITION RECOVERY FLASH NOT SUPPORTED...
WHAT SHOULD I DO NOWW?
The chip of my smartphon is mt6577..
plz help mee
Do not flash the recovery directly from the device flash it from a computer using odin...
1) enable Debug USB on your device
2) turn it off and put it it download mode( center button, volume up and power)
3)open Odin click on the checkbox nex to pda then click on pda and search for the downloaded recovery
4) connect the device
5)make sure odin recognises your device (in the dop left if it is recognised a writing will appear COM: number)
6)click start and do not disconnect untill Odin has finished
Sent from my GT-S5310 using XDA Premium 4 mobile app
1st of all I m talkng abt karbon mobile.My model nombr is karbon A27+.Does it go to download mode..
When I press volum up +power bottom it says to chose frm recovry mode and fast boot mode..
There is no download mode..And can karbon mobile b flashed through odin mode?
Volume down not up
Sent from my GT-S5310 using XDA Premium 4 mobile app
Custom ROM + CWM for A27+
Download CWM and Custom roms (S4 ROM , Note3 ROM , IOS , Xperia , Gaming ) For A27+ on my blog
i can't give you the link Bcz i am new .Simply search for Karbonn A27+ samsung note 3 rom. Blog name : Karbonn 4ndroid Devlp.
Do leave a comment on blog. karbonnroms.blogspot
Hi,
I have a Prestigio 5197D 9,7'' tablet. It has 16gb internal memory, and 1GB of RAM. CPU is clocked at 1GHz. These are the other specs from adb commands:
Code:
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 09c1a35f5052484880728850162367c7
And this is the partition info:
Code:
major minor #blocks name
93 0 16384 nanda
93 8 2048 nandb
93 16 32768 nandc
93 24 393216 nandd
93 32 1048576 nande
93 40 1024 nandf
93 48 32768 nandg
93 56 261120 nandh
93 64 1024 nandi
93 72 13774848 nandj
93 73 13773824 nandj1
When I open CPU-Z, it says that my tablet is Allwinner A10, and that CPU architecture is ARM Cortex-A8.
AnTuTu Benchmark says that brand is yftech, and I found in CPU Identifier app, that Product and Product code is mw07.
So, I suppose this is clone of some Allwinner A10 tablet, but I would like to know which, so I can install some custom rom and possible newer Android. Currently I have 4.0.3. Any help here is appreciated.
Second issue I have is with recovery. It seems that default recovery does not mount it's internal storage and I can't put anything to flash. It recognizes some micro-SD cards, but unfortunately, the only one that recognized I sold with some old phone. Every other card and internal storage works fine when I boot the tablet in normal mode. I would buy another card, but I can't be sure it'll work in recovery. Any suggestion here, maybe to modify some files so it can mount internal storage?
Thanks in advance!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Base features:
Based on latest A9 base 1.57.1405.70
Android OS: Android 6.0.1 MMB29M from A9 (32 bit part)
Sense Version: Sense 7.0_g from A9, Sense 7 from M9
Hardware legacy drivers: A9 (32 bit part)
QMI (Qualcomm Message Interface) (Modem/Signal related): Latest M8
Android Media: A9 (32 bit part)
Camera Drivers: A9 + M8
FMRadio Drivers: A9
Audio: M8 HK Audio
Other Drivers/Libs/Modules: 100% unmodified A9 modules
Support model:a5dwg|a5dug|a5dwgl|a5tl|a5ul
All d816 Version:
Made by @kinghunki for DualSim support
Based on S.ROM (Current: S3-12.0 c2)
Various options in Aroma Installer
Closer to pure stock
S Series - Original
S3: Based on A9 6.0.1, Sense 7_g
S.Team S3_Kinghunki_V3.0.0
Updates framework to 12.0 C2
Fixed 816V model
Added 816E support
Updated KingSenseTweaks
Added customizable statusbar network speed color
Added customizable statusbar label color
Added customizable statusbar arc information color
Added customizable statusbar battery bar color
Fixed unable to combine storage bug
Fixed unable to move app bug (need to switch to Sense 7 mode to work)
Fixed display wrong text after screenshot
Fixed Google contacts and calendar sync
Fixed start on boot manager and notification manager bug
Updated HTC Boost+ to latest version
Added optional Google services in Aroma
Added optional Root Explorer in Aroma
Added optional Titanium Backup in Aroma
Enabled developer options by default
S.Team S3_Kinghunki_V3.0.0 : MEGA Link
S.Team S3_Kinghunki_V3.0.0 : htcui Link
S.Team Lead Developer: sun_dream
XDA Support/Thread Maintainer: kinghunki
sun_dream for porting A9 to M8
kinghunki for XDA support, translation & Aroma
Chainfire for SuperSU
amarullz for Aroma installer
flar2 for wp_mod
It's not allowed to modify, repack this rom without my (sun_dream) permission.
first
second
Can anyone test this ? I can't download from baidu.
EDIT: Plus I really hope this one will work on UL version.
bonczas said:
Can anyone test this ? I can't download from baidu.
EDIT: Plus I really hope this one will work on UL version.
Click to expand...
Click to collapse
Please wait for MEGA upload!
MEGA upload to complete!
kinghunki said:
Please wait for MEGA upload!
MEGA upload to complete!
Click to expand...
Click to collapse
Tnx for your work guys.
Few remarks...
Aroma is in CN.
Setup process after successful boot is impossible to finish.
Since there are 216 apps, I guess there are lots of bloatware.
Couldn't check by myself, sorry.
bunkker said:
Tnx for your work guys.
Few remarks...
Aroma is in CN.
Setup process after successful boot is impossible to finish.
Since there are 216 apps, I guess there are lots of bloatware.
Couldn't check by myself, sorry.
Click to expand...
Click to collapse
HTC A9 official standards app！
我是路小轩
Got erro for a5_ul
HTC A5_Dug
Wifi not working...:crying:
Farid Sema said:
Got erro for a5_ul
Click to expand...
Click to collapse
Did you see the aroma installation process？
kinghunki said:
Did you see the aroma installation process？
Click to expand...
Click to collapse
Try to install as many times but error.
Farid Sema said:
Try to install as many times but error.
Click to expand...
Click to collapse
Probably system.img is too big for A5_UL /system partition.
bonczas said:
Probably system.img is too big for A5_UL /system partition.
Click to expand...
Click to collapse
Unfortunately the developer, from disk to disk, one and the same error. Too many applications for the system partition А5_UL. Plus encrypted system that does not give to delete part of the application for correct installation. I have repeatedly wrote on this topic, but the team S. Team has not fixed the problem.
A5UL user please wait, I will reduce the system size!
kinghunki said:
A5UL user please wait, I will reduce the system size!
Click to expand...
Click to collapse
Thank you for your prompt response, I look forward to an updated ROM.
I'm using a5dug, Wi-Fi doesn't work, in settings I can't see HK audio setting.
ROM so smooth, 3G work, camera work.
Huzin said:
I'm using a5dug, Wi-Fi doesn't work, in settings I can't see HK audio setting.
ROM so smooth, 3G work, camera work.
Click to expand...
Click to collapse
Flash ROM Model choice: 816w
Farid Sema said:
Try to install as many times but error.
Click to expand...
Click to collapse
adb shell
cat /proc/partitions
I need a5ul system partition size
kinghunki said:
adb shell
cat /proc/partitions
I need a5ul system partition size
Click to expand...
Click to collapse
c:\adb>adb shell
[email protected]_a5ul:/ $ cat /proc/partitio
cat /proc/partitions
major minor #blocks name
253 0 131072 zram0
253 1 131072 zram1
253 2 131072 zram2
253 3 131072 zram3
179 0 7634944 mmcblk0
179 1 1024 mmcblk0p1
179 2 32768 mmcblk0p2
179 3 16 mmcblk0p3
179 4 15327 mmcblk0p4
179 5 256 mmcblk0p5
179 6 24255 mmcblk0p6
179 7 256 mmcblk0p7
179 8 256 mmcblk0p8
179 9 2048 mmcblk0p9
179 10 32 mmcblk0p10
179 11 4096 mmcblk0p11
179 12 5120 mmcblk0p12
179 13 1024 mmcblk0p13
179 14 32 mmcblk0p14
179 15 1024 mmcblk0p15
259 0 61441 mmcblk0p16
259 1 5120 mmcblk0p17
259 2 8192 mmcblk0p18
259 3 1536 mmcblk0p19
259 4 76801 mmcblk0p20
259 5 4096 mmcblk0p21
259 6 10240 mmcblk0p22
259 7 7167 mmcblk0p23
259 8 1024 mmcblk0p24
259 9 1536 mmcblk0p25
259 10 1536 mmcblk0p26
259 11 20480 mmcblk0p27
259 12 4 mmcblk0p28
259 13 256 mmcblk0p29
259 14 16 mmcblk0p30
259 15 1281 mmcblk0p31
259 16 64 mmcblk0p32
259 17 1024 mmcblk0p33
259 18 1 mmcblk0p34
259 19 8 mmcblk0p35
259 20 256 mmcblk0p36
259 21 25600 mmcblk0p37
259 22 30720 mmcblk0p38
259 23 14498 mmcblk0p39
259 24 16384 mmcblk0p40
259 25 16384 mmcblk0p41
259 26 278528 mmcblk0p42
259 27 2359296 mmcblk0p43
259 28 4587520 mmcblk0p44
179 16 4096 mmcblk0rpmb
179 32 31166976 mmcblk1
179 33 31165952 mmcblk1p1
[email protected]_a5ul:/ $
Hello to everyone, my englisch is not the best one, i'm sry for that
I have Bricked device here. 64gb MTK with china Mobile branding.
It's unlocked, rooted, twrp recovery.
It worked fine with root. But than i wanted to flash new Rom (xiaomi.eu_multi_HMNote4_7.1.19_v8-6.0.zip) from TWRP. Unfortanerly it's broke after 2 sec than reboot. The system startet normaly! Next day, I wanted to try it again. But i could not start the twrp rec. The device did start any more! Bootloop i see only the mi logo in the middle of Display after 30-60 sec reboot.
So recovery do not work. Fastboot work pretty fine.
I tried already pretty much.
I flashed almost all available Fastboot Roms with few different methods Smart Phone Flash*Tool & Miflash. With original cust.img and with modified one.
Almost every time the flash was successful in normal time (miflash
420 sec & smart phone flash tool about 200sec) still Bootloop.
Thanks for help greets
start in fastboot mode and flash new twrp
Code:
fastboot flash recovery TWRP.img
after if this sucessfull start recovery from fastboot
Code:
fastboot boot TWRP.img
Try to wipe all partitions and sideload your rom file.
headshotde said:
start in fastboot mode and flash new twrp
Code:
fastboot flash recovery TWRP.img
after if this sucessfull start recovery from fastboot
Code:
fastboot boot TWRP.img
Try to wipe all partitions and sideload your rom file.
Click to expand...
Click to collapse
I forgot, i flashed already few different recoveries.
Twrp 3.0.2 from cofface
Twrp 3.0.2-x from zcx
Stock recovery
Flash successful.
I start the device with power and vol +
The same story like with rom, Bootloop
okay try following
Boot in to Recovery via Fastboot boot twrp.img
now start adb shell in TWRP
and do following command # cat /proc/partitions
and post the result my Redmi Note 4 look like this...
Code:
~ # cat /proc/partitions
major minor #blocks name
179 0 61071360 mmcblk0
179 1 16384 mmcblk0p1
179 2 512 mmcblk0p2
179 3 10240 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 32768 mmcblk0p5
179 6 32768 mmcblk0p6
179 7 8192 mmcblk0p7
179 8 13792 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 2048 mmcblk0p10
179 11 3072 mmcblk0p11
179 12 24576 mmcblk0p12
179 13 4096 mmcblk0p13
179 14 3072 mmcblk0p14
179 15 5120 mmcblk0p15
179 16 1024 mmcblk0p16
179 17 1024 mmcblk0p17
179 18 5120 mmcblk0p18
179 19 4096 mmcblk0p19
179 20 4096 mmcblk0p20
179 21 16384 mmcblk0p21
179 22 8192 mmcblk0p22
179 23 5120 mmcblk0p23
179 24 5120 mmcblk0p24
179 25 8192 mmcblk0p25
179 26 530432 mmcblk0p26
179 27 3145728 mmcblk0p27
179 28 442368 mmcblk0p28
179 29 56660975 mmcblk0p29
179 30 44032 mmcblk0p30
179 31 16384 mmcblk0p31
179 96 4096 mmcblk0rpmb
179 64 4096 mmcblk0boot1
179 32 4096 mmcblk0boot0
179 128 62367744 mmcblk1
179 129 62366720 mmcblk1p1
253 0 56660975 dm-0
~ # [6n
Unfortunately i can't boot into recovery, when I type
fastboot boot twrp.img happen nothing (i still see the fastboot logo on screen) after about 40 sec. Device reboot - - - > Bootloop
Gesendet von meinem HUAWEI MT7-L09 mit Tapatalk
make sure your twrp.img is inside the folder of adb
Gesendet von meinem Redmi Note 4 mit Tapatalk
Certainly is the twrp.img in adb folder.
On the PC screen i see that the recovery flash und boot was successful!
Sent from my HUAWEI MT7-L09 using Tapatalk
So i did it my redmi booted!!
The solution, remove battery tab for about 10 minutes. I read it @ 4pda Russian forum, Thanks for your help!
Sent from my HUAWEI MT7-L09 using Tapatalk
Daniel_Tregubov said:
So i did it my redmi booted!!
The solution, remove battery tab for about 10 minutes. I read it @ 4pda Russian forum, Thanks for your help!
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
i have the same problem as you,can u provide me more in detail plz
WickeGusLD said:
i have the same problem as you,can u provide me more in detail plz
Click to expand...
Click to collapse
Dear MasBro,
i got the same problem with my Redmi note 4 MTK, and here the solution :
* Open your caseback ReNo 4, for the information the screwdriver is 0.8. you can see the video in youtube. and becareful with the speaker on bottom of your phone
* after u open the caseback, unplug the conector battery from you handphone ( i dont know how long it need, but i unplug the battery for 1 hours )
* after that, plug back the connector and put it back the caseback ( dont turn on the handphone ).
* fastboot full rom using SP Tools, and enjoy you Redmi note 4 MTK back to normal.
Note:
- in some case the IMEI your will be missing, you can restore using "maui meta". for how to use that u can searching in google
- this is the last way u can do for u ReNo
- Do It By U Own Risk
- sorry, my languange a little bad.
JoninBlue said:
Dear MasBro,
i got the same problem with my Redmi note 4 MTK, and here the solution :
* Open your caseback ReNo 4, for the information the screwdriver is 0.8. you can see the video in youtube. and becareful with the speaker on bottom of your phone
* after u open the caseback, unplug the conector battery from you handphone ( i dont know how long it need, but i unplug the battery for 1 hours )
* after that, plug back the connector and put it back the caseback ( dont turn on the handphone ).
* fastboot full rom using SP Tools, and enjoy you Redmi note 4 MTK back to normal.
Note:
- in some case the IMEI your will be missing, you can restore using "maui meta". for how to use that u can searching in google
- this is the last way u can do for u ReNo
- Do It By U Own Risk
- sorry, my languange a little bad.
Click to expand...
Click to collapse
I have sent my phone back to xiaomi already,now it's fix.
Ps.for those people have this problem and u don't want to take risk .wipe my bootloader so that the warranty is true then sent it to xiaomi.
Anyway,thx bro,appreciate your help.