HI all,
My samsung galaxy mini has got into dead mode,because I installed a custom rom NatureUX-tass-V3.zip
My phone is not turning ON. Even when I'm charging my phone,it is not showing the charging icon and also when I connected it to PC via USB,it is not showing the battery icon. My phone was totally got dead.So,now I jus want to go to download mode,How can I do this.Please help me.....I heard that we can do this by using JTAG blah blah, I couldnt understand ,So give me the clear (procedure)explanation and required files that how can i go to download mode.
Thanks in advance
and sorry for this post if i posted it in wrong area,because I'm new to xda, and I dont know where should I post.
Thanks again
Related
Hey Guys!!!
I have bricked my Samsung Galaxy ace plus (GT7500). I was flashing this custom Atomic ROM.
First I did it successfully. The interface came where it demanded for my google account then i put in the information of my google account. The screen went blank.
Then i restarted it.but it got stuck into samsung boot logo. I even can't go through my download mode or clockwordmod.
so, was not able to use ODIN.
First ODIN Failed in flashing my ROM. then i got pissed off and switched off my mobile.
After sometime when i tried to start it. it went dead. it is even not starting. It is not even getting charged.
I know it is now bricked. Please tell me how to unbrick it.
Please help me.....
suchig8 said:
Hey Guys!!!
I have bricked my Samsung Galaxy ace plus (GT7500). I was flashing this custom Atomic ROM.
First I did it successfully. The interface came where it demanded for my google account then i put in the information of my google account. The screen went blank.
Then i restarted it.but it got stuck into samsung boot logo. I even can't go through my download mode or clockwordmod.
so, was not able to use ODIN.
First ODIN Failed in flashing my ROM. then i got pissed off and switched off my mobile.
After sometime when i tried to start it. it went dead. it is even not starting. It is not even getting charged.
I know it is now bricked. Please tell me how to unbrick it.
Please help me.....
Click to expand...
Click to collapse
First of all wrong section.. there is another section for the Ace plus, but as you already have posted i shall tell u what to do.
Remove your phone's battery. After removing your battery hold the button combination for download mode and then put put your battery back into the phone this should make your phone boot in download mode. After it is in download mode, using Odin flash one of the stock firmwares into your phone.
Press thanks if I helped.
jdgreat4 said:
First of all wrong section.. there is another section for the Ace plus, but as you already have posted i shall tell u what to do.
Remove your phone's battery. After removing your battery hold the button combination for download mode and then put put your battery back into the phone this should make your phone boot in download mode. After it is in download mode, using Odin flash one of the stock firmwares into your phone.
Press thanks if I helped.
Click to expand...
Click to collapse
Sorry but where i should post.
Thread moved to Q & A section, post in the relevant section next time.
it hard brick i think
Sent from my LG-P880 using xda app-developers app
Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy
Hello guys, I've been around a while at XDA just haven't bouned myself yet within the community.
I usually get my problems sorted out but I recently occured an error that I just can't get out neither how it happend
All of the sudden my Rooted Samsung Galaxy S3 with Android 4.4 ROM crashed and isn't able to boot up anymore he is stuck at the samsung logo and won't resume to the bootloop, I can't bootup into download modus nor recovery modus. I am clueless, I got no idea how this happend all of the sudden and I have no idea how to get rid off it. If any smart guy could help me out that would be great. when i put in my charging cable the led wont lit up neither. It does charge thou.
PS: I have no idea in what category I should post this thread since I am new
Thanx in advance
Hy all....i lost my Galaxy S4 and i got my hands on a Sony Ericsson Xperia X10 mini. First i wanted to put a custom rom on it with android 4.0...all i got was a boot loop. Then i wanted to put the stock rom back, it failed, and the phone now won't turn on at all, i can't even get into flash mode, nor recovery. My pc no longer recognizes it! I tried several things, but the problem persists... If i put my phone to charge, nothing appears on the screen. Does this happen to anyone before? I think it's dead forever . I will try to charge it for an hour or two, and i'll see what's going on. I accept any help and opinion!
Thanks in advance, and sorry for my english!
Edit: I went for a few hours of sleep, now when i connect my phone to the pc, the red led finally blinks, but the pc can't see the phone at all. Can't even get into flash mode...any advice?
Edit 2: I put the phone in to the wall charger and now it seems working (boot loop) but at least its not completely dead, i got my hope back!
What did you do next? Have you flashed it? How?
Hello guys,
I have samsung Infuse 4g and i have problem that when i try to turn it on, it wont turn on, not showing samsung logo, cant turn on download mod, when i put it on charger i see some squares over screen.Before this happend it was trying to install ICS ROM to but it i fixed, it was bricked and i fixed it..After that it was working like, coudnt install apps,just some work. I wanted to update it to 2.3.6, the update was installed,but phone still didnt install apps,started flickering screen,camera didnt work.I tried connecting it to the pc it showed kernel and 0% and from that i cant turn it on,cant see samsung logo,download mod doesnt open,on charger i see squares..The phone is dead kinda with nothing working.Guys i just want to ask you if you can help me with this problem is it possible to fix..