Hey guys,
Just rooted my N3 and was trying to install TWRP. However, goo manager is down and all their upload links do not work. I tried downloading it from a mirror site but was only able to get a 75kb file that wasn't quite working in odin.
Can anyone please upload a copy of their TWRP tar file please?
Edit: Found an older one but once the goo manager servers are back up, it'll be no problem getting the newest one
http://downloadandroidrom.com/file/GalaxyNote3/TWRP/openrecovery-twrp-2.6.3.2-hltespr.img.tar
hmmm november 12th and still down?? it finds one it does the 10 second count down and then simply does nothing. no download starts. ???
nerys71 said:
hmmm november 12th and still down?? it finds one it does the 10 second count down and then simply does nothing. no download starts. ???
Click to expand...
Click to collapse
Same here.
Just odin it!
That's what I did cuz the same thing was happening to me.
Sent from my SM-N900P using xda app-developers app
Here's the other mirror that has tar of newest version. Just download and flash with Odin
http://www.techerrata.com/browse/twrp2/hltespr
thanks for the link. got it flashed using 1.85 odin.
I think it might be "broken" though. I can't seem to flash anything. error's "unable to mount usb storage"
when I goto install and pick source I see 3 options
internal external and usb but usb shows as 0mb
??? somethings hinky maybe? maybe that is why we can't download via goomanager? maybe something wrong with current version of twrp
any suggestions?
also romtoolbox can't reboot into recover (error) but titanium does (easier than doing the finger dance)
nerys71 said:
thanks for the link. got it flashed using 1.85 odin.
I think it might be "broken" though. I can't seem to flash anything. error's "unable to mount usb storage"
when I goto install and pick source I see 3 options
internal external and usb but usb shows as 0mb
??? somethings hinky maybe? maybe that is why we can't download via goomanager? maybe something wrong with current version of twrp
any suggestions?
also romtoolbox can't reboot into recover (error) but titanium does (easier than doing the finger dance)
Click to expand...
Click to collapse
I used Odin v3.04 and it worked fine for me
Sent from my SM-N900P using Tapatalk 2
You misunderstand. Twrp flashed fine. It's flashing anything else "with" twrp that I can't seem to do
Sent from my SM-N900P using XDA Premium 4 mobile app
Do you have a otg cable and a usb flash drive plugged in to it. If not you will get a no usb. Just mount your internal or external memory. Where ever you put the flash
nerys71 said:
hmmm november 12th and still down?? it finds one it does the 10 second count down and then simply does nothing. no download starts. ???
Click to expand...
Click to collapse
ive installed the kitkat killer rom..goo manager is in the custom settings cooked into the rom..its a shame it doesnt work...anyone know anything about when goo manager mite work again?..ive never used it before..but haveing it cooked into the rom,makes me want to be able to enjoy how easy they make it,everything in one place and all. everytime i open the app,says something about there servers,and goo manager file cant be found..im aware of them being down now..but i do hope to see them have a comeback...and goo has problems with our kitkat bootloaders,hope this is fixed as well
---------- Post added at 03:34 AM ---------- Previous post was at 03:28 AM ----------
rpenrod23 said:
I used Odin v3.04 and it worked fine for me
Sent from my SM-N900P using Tapatalk 2
Click to expand...
Click to collapse
philz touch latest version working flawlessly...ive tried twrp versions 2.7 and up,installed fine but nothing else worked..im on kitkat killer now with goo manager cooked into rom,dont work though..hopeing all this gets fixed asap!!
lucky_515 said:
ive installed the kitkat killer rom..goo manager is in the custom settings cooked into the rom..its a shame it doesnt work...anyone know anything about when goo manager mite work again?..ive never used it before..but haveing it cooked into the rom,makes me want to be able to enjoy how easy they make it,everything in one place and all. everytime i open the app,says something about there servers,and goo manager file cant be found..im aware of them being down now..but i do hope to see them have a comeback...and goo has problems with our kitkat bootloaders,hope this is fixed as well
---------- Post added at 03:34 AM ---------- Previous post was at 03:28 AM ----------
philz touch latest version working flawlessly...ive tried twrp versions 2.7 and up,installed fine but nothing else worked..im on kitkat killer now with goo manager cooked into rom,dont work though..hopeing all this gets fixed asap!!
Click to expand...
Click to collapse
Just a quick note the in rom recovery flashers have had problems for a while now. Every update sprint or samsung tend to restrict more access to internal settings from the rom level/ kernel level. There are a few professional devs here who have managed to fix in the past but since the note 4 is out now i doubt we will recieve as much atention on these updates for things like this.
Sent from my SM-N900P using XDA Free mobile app
lucky_515 said:
ive installed the kitkat killer rom..goo manager is in the custom settings cooked into the rom..its a shame it doesnt work...anyone know anything about when goo manager mite work again?..ive never used it before..but haveing it cooked into the rom,makes me want to be able to enjoy how easy they make it,everything in one place and all. everytime i open the app,says something about there servers,and goo manager file cant be found..im aware of them being down now..but i do hope to see them have a comeback...and goo has problems with our kitkat bootloaders,hope this is fixed as well
---------- Post added at 03:34 AM ---------- Previous post was at 03:28 AM ----------
philz touch latest version working flawlessly...ive tried twrp versions 2.7 and up,installed fine but nothing else worked..im on kitkat killer now with goo manager cooked into rom,dont work though..hopeing all this gets fixed asap!!
Click to expand...
Click to collapse
T.W.R.P. https://www.androidfilehost.com/?fid=95784891001605333
Philz Touch https://www.androidfilehost.com/?fid=95784891001602824
Hope this helps.
Related
Now up and running for our 3D's.
HBoot 1.5 users, flash via FlashImage GUI.
So far, so good!
http://www.clockworkmod.com/rommanager
i dont understand what to do with it?? img?? i thought to flash a recovery u put it on the root of sdcard and fastboot finds it and u update.. i have hboot 140 rooted.. so how do i go about flashing this new touchscreen cwm recvovery?? yes im a noob.. and yes i tryed to find out but cant find any thing?? i just thought i needed a PG86IMG.ZIP just like when u flashed the new twrp 2.0?
evod3 said:
i dont understand what to do with it?? img?? i thought to flash a recovery u put it on the root of sdcard and fastboot finds it and u update.. i have hboot 140 rooted.. so how do i go about flashing this new touchscreen cwm recvovery?? yes im a noob.. and yes i tryed to find out but cant find any thing?? i just thought i needed a PG86IMG.ZIP just like when u flashed the new twrp 2.0?
Click to expand...
Click to collapse
flash it via flash image GUI or via fastboot using PC
evod3 said:
i dont understand what to do with it?? img?? i thought to flash a recovery u put it on the root of sdcard and fastboot finds it and u update.. i have hboot 140 rooted.. so how do i go about flashing this new touchscreen cwm recvovery?? yes im a noob.. and yes i tryed to find out but cant find any thing?? i just thought i needed a PG86IMG.ZIP just like when u flashed the new twrp 2.0?
Click to expand...
Click to collapse
If you're HBoot 1.4, you don't necessarily need to do the workaround that 1.5'ers use, but the same method works.
1) Install FlashImage GUI (either buy from market or find the apk file on XDA)
2) Select option to flash recovery image.
3) Locate recovery image of choice. You do NOT need to rename anything.
4) Flash recovery image.
5) Reboot to recovery to confirm image flashed correctly.
Those 5 steps should get you a new recovery. Let me know if you encounter any issues. This new CWM Touch Recovery seems to be working fine so far, I've tested a majority of the functions so far and have had no issues yet.
Is this better than Twrp 2.0 just need someones opinion on it. Are there any other features which makes it must have?
Sent in 3D
Boss2212 said:
Is this better than Twrp 2.0 just need someones opinion on it. Are there any other features which makes it must have?
Sent in 3D
Click to expand...
Click to collapse
I was unable to mount USB storage so i switched back to twrp 2.0
Sounds good, but I think ill wait a month before using to make sure no one finds any serious problems with it
Also, there should be an easy PG86IMG.ZIP made for this, thats how I have ALWAYS done all firmware and recovery flashes and never had a problem. It was the right way before all this flash image stuff.
mnomaanw said:
I was unable to mount USB storage so i switched back to twrp 2.0
Click to expand...
Click to collapse
One option I hadn't tried this morning, and can also confirm this.
Gives an error "E: unable to open ums lunfile (no such file or directory)"
Does it work any better than twrp 2.0?
Would backups from the previous non touch version still function ?
Sent from my CM9 HP Touchpad
DarkManX4lf said:
Does it work any better than twrp 2.0?
Click to expand...
Click to collapse
Haven't experienced any bad flashes on a few test runs yet, but as mentioned earlier in this thread, USB storage mount doesn't work, so any files you need to push you'll need to go through the ADB route until a revised version of this recovery image is created.
Link to the ADB method; scroll to post #9:
http://rootzwiki.com/topic/12348-slow-transfer-usb-mounting-unable-to-open-ums-lunfile/
Charging in recovery is fuctional?
nikosblade said:
Charging in recovery is fuctional?
Click to expand...
Click to collapse
Nope, doesn't appear to be.
You can update this straight from the rom manager application
---------- Post added at 08:46 PM ---------- Previous post was at 08:20 PM ----------
gav-collins1983 said:
You can update this straight from the rom manager application
Click to expand...
Click to collapse
Sorry,my bad,I tried and it just flashes 5.0.2.0, I was able to flash via flash image GUI, without needing to wipe caches, of course, lol, seems pretty cool, ain't tested for bugs as yet, just wanted to correct my error here
cool beans!!! it worked!! ill have to try this out for a while see how it works.. that was the first time i ever used flash gui cause i ahve hboot 1.40 never needed to.. i always thought it would be a pain to use but it was mad easy to use.. good stuff!!!!!!! thanks!!!!!!!!!!!
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
the only thing i dont like is there was no download bar?? so i dint kno when it was going to finish..
evod3 said:
cool beans!!! it worked!! ill have to try this out for a while see how it works.. that was the first time i ever used flash gui cause i ahve hboot 1.40 never needed to.. i always thought it would be a pain to use but it was mad easy to use.. good stuff!!!!!!! thanks!!!!!!!!!!!
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
the only thing i dont like is there was no download bar?? so i dint kno when it was going to finish..
Click to expand...
Click to collapse
Good stuff, man. It's a very handy app, especially for those of us stuck w/ HBOOT 1.5. Great for toggling between kernels and quickly set up new ROMS.
Yes, no more finger Olympics..
Sent from my PG86100 using XDA App
Guys, just to reiterate....
1) Mount USB storage does not work
2) Charging via recovery does not work
If you want to flash a ROM directly through the recovery, you need to rename the ROM zip to "update.zip" w/o the quotes. PITA, but that's the workaround if you do not wish to go through ADB mounting.
i actully went back to twrp 2.0 cause my phone shut off by it self after i flashed cwm touch recovery.. my phone never does that.. so i went back to twrp just to be safe..plus there was kno download bar.???
I rolled back to older version 4 of cwm not a fan of twrp 2.0 tho. Nice features but has some annoying issues lol twrp 2.0
Hi !
I have just bought a Samsung Galaxy Tab 10.1 Wifi only (GT-P7510).
I want to install ICS on it, but I'm stucked on a problem : my screen is scrolling (flickering if you prefer, like an old broken TV) on a recovery and after install some roms.
My current configuration is OK with that :
- Recovery : CWM v5.5.0.4.
- Android : 3.2
- Kernel : 2.6.36.3 [email protected] #1
- Version number : HTJ85B.XXKL2 P7510XXKL2
With this recovery, I tried to flash my tab with the latest Krang version.
Installation OK but when Android starts : my screen is flickering and never stops.
I can see the Android ignition but impossible to use it except to shut down.
When I try to flash with Cyanogen mod for P7510 (plus.google.com/100275307499530023476/posts/1Lm5iULvf3w), my recovery says :
Assert failed: getprop("ro.product.device") == "p4wifi" II getprop("ro.build.product") == "p4wifi"
Then I tried to install another recovery (a friend made it with this recovery) : andrewrecov.
This recovery starts scrolling, hard to read, then too fast to read anything.
I search for a solution on the web, but found nothing.
Just found some guys saying it's a rare problem, but I don't have any solution.
Any ideas ?
Thanks for your help
Just making a guide to fix, Keep an eye on the General forum!
Thanks mate
I tried a lot of things found on the Web but none fixed my problem.
I hope your solution will solve it.
Hi,
So i am not alone to get this problem
I dont have fixed the problem but find a workaround, if you install KANG (and other rom with scolling pb), if you lock screen (with power button) and wake up, scroll don't exist anymore and display is fine.
If you reboot the tab you have to redo lock/unlock.
After you do this the only display problem that subsist is when you change from portrait to landscape, screen goes black for a half of a second before rotating.
ddup1 said:
Hi,
So i am not alone to get this problem
I dont have fixed the problem but find a workaround, if you install KANG (and other rom with scolling pb), if you lock screen (with power button) and wake up, scroll don't exist anymore and display is fine.
If you reboot the tab you have to redo lock/unlock.
After you do this the only display problem that subsist is when you change from portrait to landscape, screen goes black for a half of a second before rotating.
Click to expand...
Click to collapse
I didn't try that, I will but it's not an acceptable solution
I really don't understand why some tablets have this problem and not all.
Maybe the Tablet origin ?
As I see you're french (me too), I bought it on rueducommerce. Same seller or another ?
Just flash another version of CWM that doesn't flicker, there are many versions of 5, doesn't matter which because in the end the ICS installs it's own CWM later.
Azertouf said:
I didn't try that, I will but it's not an acceptable solution
I really don't understand why some tablets have this problem and not all.
Maybe the Tablet origin ?
As I see you're french (me too), I bought it on rueducommerce. Same seller or another ?
Click to expand...
Click to collapse
Yeah not acceptable but no choice actually.
I bought my gtab at auchan.
There is another post about recovery flicker bug maybe its a way to get all work fine because the guy success to boot any recovery without flickering :
http://forum.xda-developers.com/showthread.php?t=1555984
Problem solved with this guide
Thanks
Azertouf said:
Problem solved with this guide
Thanks
Click to expand...
Click to collapse
What guide????
recovery rolling on p7510 with twrp 2.2.0 flashed
Noob - I've looked around a ton here trying to find some help with escaping recovery mode when the screen is rolling like this and just haven't had any luck at all...
So I flashed CWM 5.5.0.4 and went into recovery mode on my perfectly stock p7510 and got the rolling screen. I was able to see enough of the interface to reboot and was fine again - figured (stupidly now I'm seeing) that twrp 2.2.0 might not have this problem. So I flashed THAT recovery system and I'm still scrolling...however, because it's a touch screen interface now I'm pretty jammed.
What can I do about this? Is there a way to push through a reboot command?
UPDATE: WOW, I managed to peck my way back to Honeycomb. CRAZY. Going back to the "fix the scrolling screen" threads.....
Recovery Screen Scrolling
Hi, I just installed ICS on my GT-P7510 Galaxy Wifi Tablet but if I go into the ClockWorkMod recovery screen it scrolls incessantly (trying to re-root the tablet). This is the ICS Firmware/build P7510XABLPL_P7510UELPL_HOME.tar.md.5 that I installed. The device was rooted but not anymore after flashing from Honeycomb using Odin3_v1.85. I've tried installing recovery.tar.md5.....no luck......I tried installing ClockworkMod_Recovery_v5.5.0.4_P75xx.....no luck screen still scrolls. Can I even install anything via Odin now that the tablet is no longer rooted? Am I able to restore the tablet back to it's stock ROM? Am I able to do it through Kies? The tablet works on ICS as far as I can tell but I sure would like to root it again or have I in a sense "semi-bricked" it? I am a NOOB and would REALLY appreciate any feedback to get me out of this jam. I have read other posts about screens scrolling but nothing about it being the ClockWorkMod screen. Thanks to any and all who reply.
There are solutions for this. The easiest way that I have seen for ICS is to flash pershoot's bootloader variant and CWM recovery.
Go here: http://droidbasement.com/galaxy/roms/cm9/p4wifi/ and download the bootloader and recovery tar.md5 files. Flash them both via download mode with Odin and you should be fine. Come on back and let us know how you made out.
Sent from my GT-P7510 using XDA Premium HD app
djmatt604 said:
There are solutions for this. The easiest way that I have seen for ICS is to flash pershoot's bootloader variant and CWM recovery.
Go here: http://droidbasement.com/galaxy/roms/cm9/p4wifi/ and download the bootloader and recovery tar.md5 files. Flash them both via download mode with Odin and you should be fine. Come on back and let us know how you made out.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
I have same issue on P7500...
Does this solution work for P7500 also ?
His Nibs said:
Hi, I just installed ICS on my GT-P7510 Galaxy Wifi Tablet but if I go into the ClockWorkMod recovery screen it scrolls incessantly (trying to re-root the tablet). This is the ICS Firmware/build P7510XABLPL_P7510UELPL_HOME.tar.md.5 that I installed. The device was rooted but not anymore after flashing from Honeycomb using Odin3_v1.85. I've tried installing recovery.tar.md5.....no luck......I tried installing ClockworkMod_Recovery_v5.5.0.4_P75xx.....no luck screen still scrolls. Can I even install anything via Odin now that the tablet is no longer rooted? Am I able to restore the tablet back to it's stock ROM? Am I able to do it through Kies? The tablet works on ICS as far as I can tell but I sure would like to root it again or have I in a sense "semi-bricked" it? I am a NOOB and would REALLY appreciate any feedback to get me out of this jam. I have read other posts about screens scrolling but nothing about it being the ClockWorkMod screen. Thanks to any and all who reply.
Click to expand...
Click to collapse
Hi. I have the same issue as you, but with an P7500..
You can easely restore your device with ODIN and P7500XXLQ8_P7500OXALQ8_P7500XXLQ8_HOME.tar.md5 (ICS4.04).. So no problems there..
But the problem with screen flickering remains.. Plz let us know if this solution worked for you..
I do not know if I can use this solution, as it seems to be for P7510 only..
djmatt604 said:
There are solutions for this. The easiest way that I have seen for ICS is to flash pershoot's bootloader variant and CWM recovery.
Go here: http://droidbasement.com/galaxy/roms/cm9/p4wifi/ and download the bootloader and recovery tar.md5 files. Flash them both via download mode with Odin and you should be fine. Come on back and let us know how you made out.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Which cwm version is that and is it good for stock?
It's the latest release from pershoot for CWM non-touch recovery. Last I checked it was 6.0.1.2 but that was just about a week ago.
I downloaded both tar.md5's and flashed them both - bootloader first, rebooted, rebooted into recovery, flashed new recovery, done. I was on stock LPL at the time. Hope it works out!
EDIT: I've been working on getting a crisp list of steps together for a new FIX post with bugs9477 and will post that at some point this week. It will be specifically for ICS because everyone here now knows how to fix the roll for HC.
djmatt604 said:
There are solutions for this. The easiest way that I have seen for ICS is to flash pershoot's bootloader variant and CWM recovery.
Go here: http://droidbasement.com/galaxy/roms/cm9/p4wifi/ and download the bootloader and recovery tar.md5 files. Flash them both via download mode with Odin and you should be fine. Come on back and let us know how you made out.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks djmatt604 but it did not resolve my issue. Hmmmm 604 that's my area code lol! Can anyone tell me if you can re-flash the stock Honeycomb ROM back onto the device using Odin and where can I find the stock ROM? I've searched on the forums and there are links but some of them are dead/no longer working or they are for Custom ROMs.
---------- Post added at 09:17 AM ---------- Previous post was at 09:13 AM ----------
djmatt604 said:
It's the latest release from pershoot for CWM non-touch recovery. Last I checked it was 6.0.1.2 but that was just about a week ago.
I downloaded both tar.md5's and flashed them both - bootloader first, rebooted, rebooted into recovery, flashed new recovery, done. I was on stock LPL at the time. Hope it works out!
EDIT: I've been working on getting a crisp list of steps together for a new FIX post with bugs9477 and will post that at some point this week. It will be specifically for ICS because everyone here now knows how to fix the roll for HC.
Click to expand...
Click to collapse
Thanks djmatt604 but it did not resolve my issue. Hmmmm 604 that's my area code lol! Can anyone tell me if you can re-flash the stock Honeycomb ROM back onto the device using Odin and where can I find the stock ROM? I've searched on the forums and there are links but some of them are dead/no longer working or they are for Custom ROMs. your link has given me these: US_LPL_4.0.4_bootloader.zip & recovery.tar.md5. I do not see 6.0.1.2. I think part of my problem is when I flashed ICS onto my tablet in the instructions I was reading there was nothing about wiping the old ROM off the sd card FIRST then flashing the new ROM onto the formatted sd card.
---------- Post added at 09:52 AM ---------- Previous post was at 09:17 AM ----------
Before you give up, try flashing the attached file "ClockworkMod_Recovery_v5.5.0.4_P75xx.tar" via Odin. BUT instead of putting it in the PDA section, load it in the BOOTLOADER section, then flash. This solution WORKED!!!!!!!!!! A BIG ROUND OF APPLAUSE to brGabriel!!!:good:
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
xenofexos said:
Hi. I have the same issue as you, but with an P7500..
You can easely restore your device with ODIN and P7500XXLQ8_P7500OXALQ8_P7500XXLQ8_HOME.tar.md5 (ICS4.04).. So no problems there..
But the problem with screen flickering remains.. Plz let us know if this solution worked for you..
I do not know if I can use this solution, as it seems to be for P7510 only..
Click to expand...
Click to collapse
Try this solution it solved my issue but be sure to thank brGabriel for this ingenious solution! http://forum.xda-developers.com/showthread.php?p=31153208
Glad you got it worked out! FYI the recovery.tar.md5 is the CWM 6.0.1.2. If you flashed it and rebooted into recovery you'd see the version # at the top of the recovery screen.
Further, if you're flashing stock firmware via Odin (not a flashable ROM file, the stock firmware tar.md5) it will automatically wipe and relay the partitions for the entire tablet - /data,/cache,/system (the ROM itself), /sdcard (all of your storage), bootloader, all of it. You start completely clean when you go that route.
---------- Post added at 09:52 AM ---------- Previous post was at 09:17 AM ----------
[/COLOR]Before you give up, try flashing the attached file "ClockworkMod_Recovery_v5.5.0.4_P75xx.tar" via Odin. BUT instead of putting it in the PDA section, load it in the BOOTLOADER section, then flash. This solution WORKED!!!!!!!!!! A BIG ROUND OF APPLAUSE to brGabriel!!!:good:
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
Try this solution it solved my issue but be sure to thank brGabriel for this ingenious solution! http://forum.xda-developers.com/showthread.php?p=31153208
Click to expand...
Click to collapse
I appreciate the acknowledgement but I can't take full credit. I came across it somewhere while searching for a solution myself. It worked for me on stock-based ICS so I thanked the original poster. It should be noted that with that particular recovery, you may not be able to flash a CM9 or CM10 ROM until you've flashed the latest CWM recovery which you can get from www.droidbasement.com
Good luck guys
djmatt604 said:
Glad you got it worked out! FYI the recovery.tar.md5 is the CWM 6.0.1.2. If you flashed it and rebooted into recovery you'd see the version # at the top of the recovery screen.
Further, if you're flashing stock firmware via Odin (not a flashable ROM file, the stock firmware tar.md5) it will automatically wipe and relay the partitions for the entire tablet - /data,/cache,/system (the ROM itself), /sdcard (all of your storage), bootloader, all of it. You start completely clean when you go that route.
Click to expand...
Click to collapse
So how do you know if it's stock firmware vs. a flashable ROM file? I downloaded this: GT-P7510_XAB_P7510UEKMP_P7510XABKMP_P7510UEKMP onto my PC in hopes that it is the original HC firmware I had on my GT-P7510 and was going to flash it back onto my GT-P7510 if the scrolling CWM screen issue couldn't be resolved. How are you able to differentiate on whether you should use ClockWorkMod (via recovery mode) to download ROM onto SDcard then install ROM off SDcard or use Odin to install ROMS?
Thanks once again for your assistance!
I've been working at this problem for 6 hours about now...Everytime I plug in the device to put the ViperDNA rom onto it, it keeps coming up with with an MTP, or MTP USB Device driver error failed...I cannot figure out how to fix it...any suggestions?
Do you have usb debugging enabled in settings?
Also you can get the adb drivers doing a google search
cmos8088 said:
Do you have usb debugging enabled in settings?
Also you can get the adb drivers doing a google search
Click to expand...
Click to collapse
Well, the problem is once i turn on the device, it goes into SoD, and I dont believe usb debuggin was on..so what do i do?
What about using "AirDroid" from the market and copy the ROM over WiFi ?
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Thats how I do it so I never have to plug it on or download the ROM directly on the phone.
zone23 said:
What about using "AirDroid" from the market and copy the ROM over WiFi ?
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Thats how I do it so I never have to plug it on or download the ROM directly on the phone.
Click to expand...
Click to collapse
I can't even boot the phone...I can only get into recovery and fastboot. and those dont even connect right.
Well since your getting a SoD... you most likely have to reflash your rom. If you don't have it on your phone you will have to to a sideload install. I've never played with sideload but I am sure others will be able to help you.
Do you have the android sdk installed? Sounds like you don't have the right drivers installed. Get the sdk, open the sdk manager, update the usb driver, reboot the pc. You should be able to push the rom to the phone with Adb.
You need to be bootloader unlocked and have a recovery installed like twrp or cwm as well.
Sent from my HTC One X using xda app-developers app
c5satellite2 said:
Do you have the android sdk installed? Sounds like you don't have the right drivers installed. Get the sdk, open the sdk manager, update the usb driver, reboot the pc. You should be able to push the rom to the phone with Adb.
You need to be bootloader unlocked and have a recovery installed like twrp or cwm as well.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
alright, i got really close, i got adb working and i cud see the device, but then it said "protocol failure" when i pushed the rom to the phone. what now?
BTW did you happen to make a backup before flashing? If you did restore it
cmos8088 said:
BTW did you happen to make a backup before flashing? If you did restore it
Click to expand...
Click to collapse
I did, and tried to do that...but it says no files found...which makes no sense, i did backup during 1.0 viper
did you update cwm I have heard others not being able to find it once they did. Also did you get that SoD from updating to a new rom? if so it is most likely corrupt or the install didn't complete.
cmos8088 said:
did you update cwm I have heard others not being able to find it once they did. Also did you get that SoD from updating to a new rom? if so it is most likely corrupt or the install didn't complete.
Click to expand...
Click to collapse
Alright i got it to work, somehow (lol), shud i do rosie or desense? which one ismore stable? And no not from the rom, i used a dpi changer(density) to 480 dpi...and i restarted and just never would fully boot. But i think i got it now.
NSammut said:
Alright i got it to work, somehow (lol), shud i do rosie or desense? which one ismore stable? And no not from the rom, i used a dpi changer(density) to 480 dpi...and i restarted and just never would fully boot. But i think i got it now.
Click to expand...
Click to collapse
It is a matter of preference I personally like HTC sense others hate it. You can always reflash and change it...
I'm glad you got it working
cmos8088 said:
It is a matter of preference I personally like it others don't hate it. You can always reflash and change it...
I'm glad you got it working
Click to expand...
Click to collapse
Yup, thanks for your help...I honestly don't know how i got it working, but i hope it stays that way haha.
Glad to hear you are back up and running. Rosie and sense run great on the DNA. But if you are messing with the dpi you might be better off desensing.
Sent from my HTC One X using xda app-developers app
Hello. I am new to forums in general. In fact I made this account just now so I can get some help as I cannot seem to find an answer anywhere.
I am trying to flash clockworkmod to my Galaxy S4. I have successfully rooted with the help of Odin and Motochopper. I downloaded Rom Manager from the playstore and used it to flash(?) CWM 6.0.4.4. When I try to boot into recovery a yellow triangle with an exclamation point appears with the text, "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." In the top left corner of my screen it also says Secure Fail: Kernel. If I reboot into download mode and press the volume key down, my phone resets and boots up normally. What is going on?
I have tried using these methods but they don't work.
http://forum.xda-developers.com/showthread.php?t=2292112
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
http://www.sxtpdevelopers.com/showthread.php?t=257
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
I have SU (#) access in Terminal Emulator.
I have also been following this guide here:
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
but the prepare and flash recovery image step makes no sense to me.
My SuperSU is up to date. My rootchecker also states that I have root access.
I have version MDK.
Can anyone help me please?
Tiraniss said:
Hello. I am new to forums in general. In fact I made this account just now so I can get some help as I cannot seem to find an answer anywhere.
I am trying to flash clockworkmod to my Galaxy S4. I have successfully rooted with the help of Odin and Motochopper. I downloaded Rom Manager from the playstore and used it to flash(?) CWM 6.0.4.4. When I try to boot into recovery a yellow triangle with an exclamation point appears with the text, "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." In the top left corner of my screen it also says Secure Fail: Kernel. If I reboot into download mode and press the volume key down, my phone resets and boots up normally. What is going on?
I have tried using these methods but they don't work.
http://forum.xda-developers.com/showthread.php?t=2292112
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
http://www.sxtpdevelopers.com/showthread.php?t=257
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
I have SU (#) access in Terminal Emulator.
I have also been following this guide here:
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
but the prepare and flash recovery image step makes no sense to me.
My SuperSU is up to date. My rootchecker also states that I have root access.
I have version MDK.
Can anyone help me please?
Click to expand...
Click to collapse
Try downloading Goo Manager from the Play store. Hit the menu button, click install open recovery.
yofife2069 said:
Try downloading Goo Manager from the Play store. Hit the menu button, click install open recovery.
Click to expand...
Click to collapse
I agree. What he's referring to is installing TWRP 2.6.3.1. The easiest way is the method he described. The normal method is here: http://teamw.in/project/twrp2/181
yofife2069 said:
Try downloading Goo Manager from the Play store. Hit the menu button, click install open recovery.
Click to expand...
Click to collapse
WhoNeedszzz said:
I agree. What he's referring to is installing TWRP 2.6.3.1. The easiest way is the method he described.
I'm sorry. I forgot to mention that I have tried using Goo Manager. It does the same thing as ROM manager.
Sorry for taking the link out of WhoNeedszzz post, but it wouldn't let me post with one until I have posted 10 or more times.
Click to expand...
Click to collapse
Tiraniss said:
WhoNeedszzz said:
I agree. What he's referring to is installing TWRP 2.6.3.1. The easiest way is the method he described.
I'm sorry. I forgot to mention that I have tried using Goo Manager. It does the same thing as ROM manager.
Sorry for taking the link out of WhoNeedszzz post, but it wouldn't let me post with one until I have posted 10 or more times.
Click to expand...
Click to collapse
I'd say it's because the file is in your download folder. Not in the path the post uses. Direct the path to your dl folder
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:51 PM ---------- Previous post was at 09:44 PM ----------
Also could try to odin one of the no wipe for mdk tar in android development. Puts to stock. Start over. It odin one with root pre-installed. Mdk of course
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
Or could odin one with root pre-installed is was what I meant to say
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mightycaptain said:
Tiraniss said:
I'd say it's because the file is in your download folder. Not in the path the post uses. Direct the path to your dl folder
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:51 PM ---------- Previous post was at 09:44 PM ----------
Also could try to odin one of the no wipe for mdk tar in android development. Puts to stock. Start over. It odin one with root pre-installed. Mdk of course
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
Or could odin one with root pre-installed is was what I meant to say
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So to use rom and goo manager I need to download the cwm or twrp file? I thought the apps did that themselves. As for using odin.. where can I find a pre rooted stock rom?
Click to expand...
Click to collapse
Tiraniss said:
Mightycaptain said:
So to use rom and goo manager I need to download the cwm or twrp file? I thought the apps did that themselves. As for using odin.. where can I find a pre rooted stock rom?
Click to expand...
Click to collapse
If your rooted. Put the twrp image at the root of your sdcard. Internal storage.use terminal emulator to flash it. The link above in the earlier post will direct you to the twrp site. Choose direct download. But below that it has instructions for how to flash twrp via terminal emulator. I recommend version 2.5.0.2. Not the latest.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mightycaptain said:
Tiraniss said:
If your rooted. Put the twrp image at the root of your sdcard. Internal storage.use terminal emulator to flash it. The link above in the earlier post will direct you to the twrp site. Choose direct download. But below that it has instructions for how to flash twrp via terminal emulator. I recommend version 2.5.0.2. Not the latest.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you so much! I now have TWRP 2.5.0.2 recovery. I have also successfully flashed Cyanogen Mod 10.2 to my phone. Now my only problem is... My 3g doesn't work? My wifi is just fine. I have the 3g option enabled as well. I am also unable to send text messages yet I can receive them. I can also make and receive phone calls.
NEVER MIND! I restarted my phone and now my 3g and texting work just fine I love you so much mightycaptain.. Can I have your babies?
Click to expand...
Click to collapse
Tiraniss said:
Mightycaptain said:
Thank you so much! I now have TWRP 2.5.0.2 recovery. I have also successfully flashed Cyanogen Mod 10.2 to my phone. Now my only problem is... My 3g doesn't work? My wifi is just fine. I have the 3g option enabled as well. I am also unable to send text messages yet I can receive them. I can also make and receive phone calls.
NEVER MIND! I restarted my phone and now my 3g and texting work just fine I love you so much mightycaptain.. Can I have your babies?
Click to expand...
Click to collapse
Came here to say, just in case someone else cannot follow the steps described by mightycaptain you can flash back to stock and start over. My personal savior is a the VRUAMDK_NoWipe.tar. You can pick it up here: http://galaxys4root.com/galaxy-s4-stock-firmware/
NOTE: Flashing back to stock does not always work and can make things worse depending on your situation. USE the forum search function before you flash.:highfive:
Click to expand...
Click to collapse
Hello all,
New to the HTC One and hit the wrong damn box going to quickly and deleted the OS. Device shows "unlocked, tampered". In TWRP I can transfer a rom with my Mac using ADB side load. But when trying to install the rom.zip it fails automatically. Android Revolution is the rom I'm trying to install. Is there a way to just install stock ATT 4.4.2 and start fresh? Edit: Just tried flashing a rom from external sd with no luck either.
Anybody?
Can get to bootloader mode?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
godofwar762 said:
Can get to bootloader mode?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I can get to boot loader. The phone is recognized through ADB and through fast boot. Just have no clue how to get an OS back on the phone, just got the phone and hadn't done a backup since there wasn't anything on it yet. (stupid me)...Can I use the stock backup from this thread?
http://forum.xda-developers.com/showthread.php?t=2701376
Anybody got any ideas to nudge me in the right direction would be very much appreciated!
http://forum.xda-developers.com/showthread.php?t=2721435 I would try this and when u flash the zip in the RUU just get into recovery and wipe big 3 and flash a sense Rom.
---------- Post added at 04:03 AM ---------- Previous post was at 03:59 AM ----------
Be sure get s-off too
Sent from my HTC One_M8 using XDA Premium 4 mobile app
godofwar762 said:
http://forum.xda-developers.com/showthread.php?t=2721435 I would try this and when u flash the zip in the RUU just get into recovery and wipe big 3 and flash a sense Rom.
---------- Post added at 04:03 AM ---------- Previous post was at 03:59 AM ----------
Be sure get s-off too
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've been reading about the RUU mode but how exactly do I go about it? I downloaded a stock backup from Mr. Hofs post based off my CCID, I'm just not sure how to get my phone back up and running:/ Just want to get it back to stock and I'll leave it alone.
Currently there isn't a RUU for stock sense just stock android for the GPE edition . Only way to get a stock Rom is to flash a recovery back up after u do the steps in that Thread .
Sent from my HTC One_M8 using XDA Premium 4 mobile app
godofwar762 said:
Currently there isn't a RUU for stock sense just stock android for the GPE edition . Only way to get a stock Rom is to flash a recovery back up after u do the steps in that Thread .
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What about just flashing a custom rom then?
Try to just mount in TWRP (not sideload) and adb push the custom ROM of your choice to the phone storage.
Not sure if this will put you in any better position. But its worth a try.
redpoint73 said:
Try to just mount in TWRP (not sideload) and adb push the custom ROM of your choice to the phone storage.
Not sure if this will put you in any better position. But its worth a try.
Click to expand...
Click to collapse
I will try and just push the rom over but what do you mean by "just mount inTWRP?".
maclem8223 said:
I will try and just push the rom over but what do you mean by "just mount inTWRP?".
Click to expand...
Click to collapse
The is an actual "Mount" button on the TWRP homescreen. But it should already be setup by default (you can check in the "Mount" options) to mount the phone's data partition when you boot into TWRP and have USB connected.
After you've pushed the ROM to the phone's memory, install from TWRP the "usual" way. I think I've seen there this method has worked for people when ADB sideload did not (on my old EVITA). So hopefully this will work for you.
I did the same thing. I downloaded the custom ROM to internal memory .. popped into TWRP .. .. .. formatted all memory (INCLUDING Internal) .. then had 3.23454542234 seconds of wondering where my ROM was. LOL
All I did was copy the ROM to a MicroSD card (from a different PC with Micro to SD adaptor) .. installed the MicroSD card into the phone .. then flashed from the MicroSD card .. no worries. Easy Pasy!
EDIT: I see you tried. I also loaded Android Revolution .. I think you might want to try downloading the ROM again? I can confirm that I used that exact ROM and did the same thing of deleting the OS.
wattsja said:
I did the same thing. I downloaded the custom ROM to internal memory .. popped into TWRP .. .. .. formatted all memory (INCLUDING Internal) .. then had 3.23454542234 seconds of wondering where my ROM was. LOL
All I did was copy the ROM to a MicroSD card (from a different PC with Micro to SD adaptor) .. installed the MicroSD card into the phone .. then flashed from the MicroSD card .. no worries. Easy Pasy!
EDIT: I see you tried. I also loaded Android Revolution .. I think you might want to try downloading the ROM again? I can confirm that I used that exact ROM and did the same thing of deleting the OS.
Click to expand...
Click to collapse
Thank you, that's what I'm working on now but the MD5's checked out.
redpoint73 said:
The is an actual "Mount" button on the TWRP homescreen. But it should already be setup by default (you can check in the "Mount" options) to mount the phone's data partition when you boot into TWRP and have USB connected.
After you've pushed the ROM to the phone's memory, install from TWRP the "usual" way. I think I've seen there this method has worked for people when ADB sideload did not (on my old EVITA). So hopefully this will work for you.
Click to expand...
Click to collapse
Not sure if the push is working.... ./adb push rom.zip /sdcard/data/media
I hit enter and the terminal just sits there so I'm not sure if I'm doing it correctly.
Put rom on external sd and install unless TWRP dont see external yet. ALways did this on my last few phones.
maclem8223 said:
Not sure if the push is working.... ./adb push rom.zip /sdcard/data/media
I hit enter and the terminal just sits there so I'm not sure if I'm doing it correctly.
Click to expand...
Click to collapse
A lot of ROMs are almost 2 GB (depending on which ROM, of course). So it takes some time to transfer over.
If there is no error message right away, it might be a good sign its being moved over.
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
JayRolla said:
Put rom on external sd and install unless TWRP dont see external yet. ALways did this on my last few phones.
Click to expand...
Click to collapse
He already tried this, and response #13 above suggested the same thing.
redpoint73 said:
A lot of ROMs are almost 2 GB (depending on which ROM, of course). So it takes some time to transfer over.
If there is no error message right away, it might be a good sign its being moved over.
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
He already tried this, and response #13 above suggested the same thing.
Click to expand...
Click to collapse
It was a sideload issue the whole time. Pushed Android_Revolution and it installed. Now it's rebooting I hope, been on the HTC One screen for awhile?EDIT: All set folks, thank you so much for the help! No OS is still showing in boot loader though.
maclem8223 said:
It was a sideload issue the whole time. Pushed Android_Revolution and it installed. Now it's rebooting I hope, been on the HTC One screen for awhile?
Click to expand...
Click to collapse
First boot after a flash takes a while. Maybe a few minutes (didn't keep track). Wait 5 or 10 minutes before you panic.
---------- Post added at 02:59 PM ---------- Previous post was at 02:27 PM ----------
maclem8223 said:
EDIT: All set folks, thank you so much for the help! No OS is still showing in boot loader though.
Click to expand...
Click to collapse
Please click the "Thanks" button for any posts you found helpful.
I don't show any OS number in bootloader either, and I am also on Android Revolution. Don't know if it was the same when I was on GoldenEye.
redpoint73 said:
First boot after a flash takes a while. Maybe a few minutes (didn't keep track). Wait 5 or 10 minutes before you panic.
---------- Post added at 02:59 PM ---------- Previous post was at 02:27 PM ----------
Please click the "Thanks" button for any posts you found helpful.
I don't show any OS number in bootloader either, and I am also on Android Revolution. Don't know if it was the same when I was on GoldenEye.
Click to expand...
Click to collapse
Made a nandroid backup so now I'm happy. Thanks again!