Hello all,
New to the HTC One and hit the wrong damn box going to quickly and deleted the OS. Device shows "unlocked, tampered". In TWRP I can transfer a rom with my Mac using ADB side load. But when trying to install the rom.zip it fails automatically. Android Revolution is the rom I'm trying to install. Is there a way to just install stock ATT 4.4.2 and start fresh? Edit: Just tried flashing a rom from external sd with no luck either.
Anybody?
Can get to bootloader mode?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
godofwar762 said:
Can get to bootloader mode?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I can get to boot loader. The phone is recognized through ADB and through fast boot. Just have no clue how to get an OS back on the phone, just got the phone and hadn't done a backup since there wasn't anything on it yet. (stupid me)...Can I use the stock backup from this thread?
http://forum.xda-developers.com/showthread.php?t=2701376
Anybody got any ideas to nudge me in the right direction would be very much appreciated!
http://forum.xda-developers.com/showthread.php?t=2721435 I would try this and when u flash the zip in the RUU just get into recovery and wipe big 3 and flash a sense Rom.
---------- Post added at 04:03 AM ---------- Previous post was at 03:59 AM ----------
Be sure get s-off too
Sent from my HTC One_M8 using XDA Premium 4 mobile app
godofwar762 said:
http://forum.xda-developers.com/showthread.php?t=2721435 I would try this and when u flash the zip in the RUU just get into recovery and wipe big 3 and flash a sense Rom.
---------- Post added at 04:03 AM ---------- Previous post was at 03:59 AM ----------
Be sure get s-off too
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've been reading about the RUU mode but how exactly do I go about it? I downloaded a stock backup from Mr. Hofs post based off my CCID, I'm just not sure how to get my phone back up and running:/ Just want to get it back to stock and I'll leave it alone.
Currently there isn't a RUU for stock sense just stock android for the GPE edition . Only way to get a stock Rom is to flash a recovery back up after u do the steps in that Thread .
Sent from my HTC One_M8 using XDA Premium 4 mobile app
godofwar762 said:
Currently there isn't a RUU for stock sense just stock android for the GPE edition . Only way to get a stock Rom is to flash a recovery back up after u do the steps in that Thread .
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What about just flashing a custom rom then?
Try to just mount in TWRP (not sideload) and adb push the custom ROM of your choice to the phone storage.
Not sure if this will put you in any better position. But its worth a try.
redpoint73 said:
Try to just mount in TWRP (not sideload) and adb push the custom ROM of your choice to the phone storage.
Not sure if this will put you in any better position. But its worth a try.
Click to expand...
Click to collapse
I will try and just push the rom over but what do you mean by "just mount inTWRP?".
maclem8223 said:
I will try and just push the rom over but what do you mean by "just mount inTWRP?".
Click to expand...
Click to collapse
The is an actual "Mount" button on the TWRP homescreen. But it should already be setup by default (you can check in the "Mount" options) to mount the phone's data partition when you boot into TWRP and have USB connected.
After you've pushed the ROM to the phone's memory, install from TWRP the "usual" way. I think I've seen there this method has worked for people when ADB sideload did not (on my old EVITA). So hopefully this will work for you.
I did the same thing. I downloaded the custom ROM to internal memory .. popped into TWRP .. .. .. formatted all memory (INCLUDING Internal) .. then had 3.23454542234 seconds of wondering where my ROM was. LOL
All I did was copy the ROM to a MicroSD card (from a different PC with Micro to SD adaptor) .. installed the MicroSD card into the phone .. then flashed from the MicroSD card .. no worries. Easy Pasy!
EDIT: I see you tried. I also loaded Android Revolution .. I think you might want to try downloading the ROM again? I can confirm that I used that exact ROM and did the same thing of deleting the OS.
wattsja said:
I did the same thing. I downloaded the custom ROM to internal memory .. popped into TWRP .. .. .. formatted all memory (INCLUDING Internal) .. then had 3.23454542234 seconds of wondering where my ROM was. LOL
All I did was copy the ROM to a MicroSD card (from a different PC with Micro to SD adaptor) .. installed the MicroSD card into the phone .. then flashed from the MicroSD card .. no worries. Easy Pasy!
EDIT: I see you tried. I also loaded Android Revolution .. I think you might want to try downloading the ROM again? I can confirm that I used that exact ROM and did the same thing of deleting the OS.
Click to expand...
Click to collapse
Thank you, that's what I'm working on now but the MD5's checked out.
redpoint73 said:
The is an actual "Mount" button on the TWRP homescreen. But it should already be setup by default (you can check in the "Mount" options) to mount the phone's data partition when you boot into TWRP and have USB connected.
After you've pushed the ROM to the phone's memory, install from TWRP the "usual" way. I think I've seen there this method has worked for people when ADB sideload did not (on my old EVITA). So hopefully this will work for you.
Click to expand...
Click to collapse
Not sure if the push is working.... ./adb push rom.zip /sdcard/data/media
I hit enter and the terminal just sits there so I'm not sure if I'm doing it correctly.
Put rom on external sd and install unless TWRP dont see external yet. ALways did this on my last few phones.
maclem8223 said:
Not sure if the push is working.... ./adb push rom.zip /sdcard/data/media
I hit enter and the terminal just sits there so I'm not sure if I'm doing it correctly.
Click to expand...
Click to collapse
A lot of ROMs are almost 2 GB (depending on which ROM, of course). So it takes some time to transfer over.
If there is no error message right away, it might be a good sign its being moved over.
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
JayRolla said:
Put rom on external sd and install unless TWRP dont see external yet. ALways did this on my last few phones.
Click to expand...
Click to collapse
He already tried this, and response #13 above suggested the same thing.
redpoint73 said:
A lot of ROMs are almost 2 GB (depending on which ROM, of course). So it takes some time to transfer over.
If there is no error message right away, it might be a good sign its being moved over.
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
He already tried this, and response #13 above suggested the same thing.
Click to expand...
Click to collapse
It was a sideload issue the whole time. Pushed Android_Revolution and it installed. Now it's rebooting I hope, been on the HTC One screen for awhile?EDIT: All set folks, thank you so much for the help! No OS is still showing in boot loader though.
maclem8223 said:
It was a sideload issue the whole time. Pushed Android_Revolution and it installed. Now it's rebooting I hope, been on the HTC One screen for awhile?
Click to expand...
Click to collapse
First boot after a flash takes a while. Maybe a few minutes (didn't keep track). Wait 5 or 10 minutes before you panic.
---------- Post added at 02:59 PM ---------- Previous post was at 02:27 PM ----------
maclem8223 said:
EDIT: All set folks, thank you so much for the help! No OS is still showing in boot loader though.
Click to expand...
Click to collapse
Please click the "Thanks" button for any posts you found helpful.
I don't show any OS number in bootloader either, and I am also on Android Revolution. Don't know if it was the same when I was on GoldenEye.
redpoint73 said:
First boot after a flash takes a while. Maybe a few minutes (didn't keep track). Wait 5 or 10 minutes before you panic.
---------- Post added at 02:59 PM ---------- Previous post was at 02:27 PM ----------
Please click the "Thanks" button for any posts you found helpful.
I don't show any OS number in bootloader either, and I am also on Android Revolution. Don't know if it was the same when I was on GoldenEye.
Click to expand...
Click to collapse
Made a nandroid backup so now I'm happy. Thanks again!
Related
Now up and running for our 3D's.
HBoot 1.5 users, flash via FlashImage GUI.
So far, so good!
http://www.clockworkmod.com/rommanager
i dont understand what to do with it?? img?? i thought to flash a recovery u put it on the root of sdcard and fastboot finds it and u update.. i have hboot 140 rooted.. so how do i go about flashing this new touchscreen cwm recvovery?? yes im a noob.. and yes i tryed to find out but cant find any thing?? i just thought i needed a PG86IMG.ZIP just like when u flashed the new twrp 2.0?
evod3 said:
i dont understand what to do with it?? img?? i thought to flash a recovery u put it on the root of sdcard and fastboot finds it and u update.. i have hboot 140 rooted.. so how do i go about flashing this new touchscreen cwm recvovery?? yes im a noob.. and yes i tryed to find out but cant find any thing?? i just thought i needed a PG86IMG.ZIP just like when u flashed the new twrp 2.0?
Click to expand...
Click to collapse
flash it via flash image GUI or via fastboot using PC
evod3 said:
i dont understand what to do with it?? img?? i thought to flash a recovery u put it on the root of sdcard and fastboot finds it and u update.. i have hboot 140 rooted.. so how do i go about flashing this new touchscreen cwm recvovery?? yes im a noob.. and yes i tryed to find out but cant find any thing?? i just thought i needed a PG86IMG.ZIP just like when u flashed the new twrp 2.0?
Click to expand...
Click to collapse
If you're HBoot 1.4, you don't necessarily need to do the workaround that 1.5'ers use, but the same method works.
1) Install FlashImage GUI (either buy from market or find the apk file on XDA)
2) Select option to flash recovery image.
3) Locate recovery image of choice. You do NOT need to rename anything.
4) Flash recovery image.
5) Reboot to recovery to confirm image flashed correctly.
Those 5 steps should get you a new recovery. Let me know if you encounter any issues. This new CWM Touch Recovery seems to be working fine so far, I've tested a majority of the functions so far and have had no issues yet.
Is this better than Twrp 2.0 just need someones opinion on it. Are there any other features which makes it must have?
Sent in 3D
Boss2212 said:
Is this better than Twrp 2.0 just need someones opinion on it. Are there any other features which makes it must have?
Sent in 3D
Click to expand...
Click to collapse
I was unable to mount USB storage so i switched back to twrp 2.0
Sounds good, but I think ill wait a month before using to make sure no one finds any serious problems with it
Also, there should be an easy PG86IMG.ZIP made for this, thats how I have ALWAYS done all firmware and recovery flashes and never had a problem. It was the right way before all this flash image stuff.
mnomaanw said:
I was unable to mount USB storage so i switched back to twrp 2.0
Click to expand...
Click to collapse
One option I hadn't tried this morning, and can also confirm this.
Gives an error "E: unable to open ums lunfile (no such file or directory)"
Does it work any better than twrp 2.0?
Would backups from the previous non touch version still function ?
Sent from my CM9 HP Touchpad
DarkManX4lf said:
Does it work any better than twrp 2.0?
Click to expand...
Click to collapse
Haven't experienced any bad flashes on a few test runs yet, but as mentioned earlier in this thread, USB storage mount doesn't work, so any files you need to push you'll need to go through the ADB route until a revised version of this recovery image is created.
Link to the ADB method; scroll to post #9:
http://rootzwiki.com/topic/12348-slow-transfer-usb-mounting-unable-to-open-ums-lunfile/
Charging in recovery is fuctional?
nikosblade said:
Charging in recovery is fuctional?
Click to expand...
Click to collapse
Nope, doesn't appear to be.
You can update this straight from the rom manager application
---------- Post added at 08:46 PM ---------- Previous post was at 08:20 PM ----------
gav-collins1983 said:
You can update this straight from the rom manager application
Click to expand...
Click to collapse
Sorry,my bad,I tried and it just flashes 5.0.2.0, I was able to flash via flash image GUI, without needing to wipe caches, of course, lol, seems pretty cool, ain't tested for bugs as yet, just wanted to correct my error here
cool beans!!! it worked!! ill have to try this out for a while see how it works.. that was the first time i ever used flash gui cause i ahve hboot 1.40 never needed to.. i always thought it would be a pain to use but it was mad easy to use.. good stuff!!!!!!! thanks!!!!!!!!!!!
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
the only thing i dont like is there was no download bar?? so i dint kno when it was going to finish..
evod3 said:
cool beans!!! it worked!! ill have to try this out for a while see how it works.. that was the first time i ever used flash gui cause i ahve hboot 1.40 never needed to.. i always thought it would be a pain to use but it was mad easy to use.. good stuff!!!!!!! thanks!!!!!!!!!!!
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
the only thing i dont like is there was no download bar?? so i dint kno when it was going to finish..
Click to expand...
Click to collapse
Good stuff, man. It's a very handy app, especially for those of us stuck w/ HBOOT 1.5. Great for toggling between kernels and quickly set up new ROMS.
Yes, no more finger Olympics..
Sent from my PG86100 using XDA App
Guys, just to reiterate....
1) Mount USB storage does not work
2) Charging via recovery does not work
If you want to flash a ROM directly through the recovery, you need to rename the ROM zip to "update.zip" w/o the quotes. PITA, but that's the workaround if you do not wish to go through ADB mounting.
i actully went back to twrp 2.0 cause my phone shut off by it self after i flashed cwm touch recovery.. my phone never does that.. so i went back to twrp just to be safe..plus there was kno download bar.???
I rolled back to older version 4 of cwm not a fan of twrp 2.0 tho. Nice features but has some annoying issues lol twrp 2.0
This is a working build of CWM recovery.
Thank you to those you have confirmed everything working.
credit goes to utkanos he made this.
if you decide to continue building from this, no need to ask, just give utkanos credit
device tree if you want to continue to work from this:
https://github.com/utkanos/android_device_htc_fireball
download link
http://dl.dropbox.com/u/26383143/HTC Incredible 4G/fireball4.img
Has anyone tried this?
droid10 said:
Has anyone tried this?
Click to expand...
Click to collapse
I can try it when I get home (in about an hour and a half)
---------- Post added at 04:18 PM ---------- Previous post was at 04:06 PM ----------
Flashed, works great.
To access the SD card to flash things, rather than choosing "Choose zip from sdcard" you need to choose "choose zip from external sdcard".
This works just like the regular CWM recovery on the Inc2 (For those that had it) no touch screen aspects of this at all.
For reference (and those lazy)
Boot to the bootloader (when phone is off, hold down power button and Volume Down button till you see the bootloader
OR type this in terminal while phone is on and plugged in (with adb and fastboot)
Code:
adb reboot bootloader
once in bootloader, and makesure fireball4.img is in the same folder you are working in
Code:
fastboot flash recovery fireball4.img
Code:
fastboot reboot
- Or choose "reboot" in the bootloader.
And now you have the recovery. To access it (while phone is fully booted):
Code:
adb reboot recovery
It works perfectly. Thanks
this works perfectly. i tried twrp but its not for me im used to ext4 but ive also used cwm in the past with my og inc.thanks for this
---------- Post added at 02:17 PM ---------- Previous post was at 02:06 PM ----------
I'm looking in the download section of Rom manager and I gotta ask is this from the dinc 2
Linch89 said:
this works perfectly. i tried twrp but its not for me im used to ext4 but ive also used cwm in the past with my og inc.thanks for this
---------- Post added at 02:17 PM ---------- Previous post was at 02:06 PM ----------
I'm looking in the download section of Rom manager and I gotta ask is this from the dinc 2
Click to expand...
Click to collapse
im confused by your question?
a recovery is unique to a phone
u can go ahead and try to run an inc2 recovery on your phone and see what happens, but i don't suggest it lol.
i also didn't build this, I asked utkanos and he did it.
I haven't tried/put in any effort to build a recovery.
I'd like to get the soft keys working on this.
andybones said:
im confused by your question?
a recovery is unique to a phone
u can go ahead and try to run an inc2 recovery on your phone and see what happens, but i don't suggest it lol.
i also didn't build this, I asked utkanos and he did it.
I haven't tried/put in any effort to build a recovery.
I'd like to get the soft keys working on this.
Click to expand...
Click to collapse
I'm guessing he means he was using a CWM recovery on his OG Dinc. I also used the CWM recovery on my OG Dinc and was very happy with it on that phone. CWM did all I needed and worked very well with the pro version of ROM Manger to do scheduled Nandroid backups. Based on that experience, I'm leaning towards using CWM, too. (FWIW, I'm also using a CWM build on my Kindle Fire, too)
This is why I asked if he built it from the dinc2 just curious
Linch89 said:
This is why I asked if he built it from the dinc2 just curious
Click to expand...
Click to collapse
sorry I'm still confused
andybones said:
sorry I'm still confused
Click to expand...
Click to collapse
Who's on first?
Jafmf95 said:
Who's on first?
Click to expand...
Click to collapse
Yes
junkmail9 said:
Yes
Click to expand...
Click to collapse
Bacon
Lemon meringue pie.
andybones said:
sorry I'm still confused
Click to expand...
Click to collapse
If you look at his screenshot, you'll notice that ROM Manager thinks his phone is the Inc2. That's why he's asking.
mdmower said:
If you look at his screenshot, you'll notice that ROM Manager thinks his phone is the Inc2. That's why he's asking.
Click to expand...
Click to collapse
Great catch. I missed that entirely. That could create a bit of a problem if he tries to install a ROM. Sounds like a question for Koush.
I checked the download section of Rom manager for ****s and gigs and that's what I found. Secretly, I was hoping that cm would magically be in there
I don't use ROM manager... I manage my own ROMs
andybones said:
I don't use ROM manager... I manage my own ROMs
Click to expand...
Click to collapse
Sure. I never installed any ROMs from it, either, but the automated nandroid back up feature is nice.
Sent from my Fireball using Xparent Blue Tapatalk 2
have you got the device tree that was used to build this?
Lloir said:
have you got the device tree that was used to build this?
Click to expand...
Click to collapse
here is the device tree
https://github.com/utkanos/android_device_htc_fireball
So I had Cyanogenmod 10 on my tf201 with clockwork recovery. In the Dev page there is a new Rom for PA for the 201. I did exactly as it said and factory reset, wiped cache, ect then installed PA and GAAPS. Problem is Im stuck at the splash screen on boot now and I DONT HAVE ANY OTHER ROM LOADED ON THE MEMORY. CMW recover doesnt recoginise micro sd cards and no matter what i try that PA rom wont load. So now I feel I have a very expencise paper weight and I'm dieing of worry here. PLEASE any help in this issue would be much appreciated!
redon2 said:
So I had Cyanogenmod 10 on my tf201 with clockwork recovery. In the Dev page there is a new Rom for PA for the 201. I did exactly as it said and factory reset, wiped cache, ect then installed PA and GAAPS. Problem is Im stuck at the splash screen on boot now and I DONT HAVE ANY OTHER ROM LOADED ON THE MEMORY. CMW recover doesnt recoginise micro sd cards and no matter what i try that PA rom wont load. So now I feel I have a very expencise paper weight and I'm dieing of worry here. PLEASE any help in this issue would be much appreciated!
Click to expand...
Click to collapse
Is there some way I can boot from usb or adb transfer or somthing. Or am I completely screwed here? This is horrible
redon2 said:
Is there some way I can boot from usb or adb transfer or somthing. Or am I completely screwed here? This is horrible
Click to expand...
Click to collapse
If you are using cwm chances are you are on the ics bootloader. To check look where the nvidia logo is when you turn it on. If it is bottom center it is ics, bottom right is jb.
Now go to the twrp thread and then to their website and get twrp for your bootloader (prob ics) and flash in fastboot. Now you can flash from external sd.
flumpster said:
If you are using cwm chances are you are on the ics bootloader. To check look where the nvidia logo is when you turn it on. If it is bottom center it is ics, bottom right is jb.
Now go to the twrp thread and then to their website and get twrp for your bootloader (prob ics) and flash in fastboot. Now you can flash from external sd.
Click to expand...
Click to collapse
Thanks flumpster! I ended up finding an emergency file transfer that uses fastboot. You're solution would have been simpler but in the end its back up and running with a JB bootloader and rom now :victory:
Same issue
redon2 said:
Thanks flumpster! I ended up finding an emergency file transfer that uses fastboot. You're solution would have been simpler but in the end its back up and running with a JB bootloader and rom now :victory:
Click to expand...
Click to collapse
I have the same exact problem. Where did you finding the emergency file transfer that uses fastboot?
---------- Post added at 05:40 PM ---------- Previous post was at 05:30 PM ----------
flumpster said:
If you are using cwm chances are you are on the ics bootloader. To check look where the nvidia logo is when you turn it on. If it is bottom center it is ics, bottom right is jb.
Now go to the twrp thread and then to their website and get twrp for your bootloader (prob ics) and flash in fastboot. Now you can flash from external sd.
Click to expand...
Click to collapse
I can't find twrp for Asus Prime on their website... or the thread in this forum? Its probably somewhere obvious, could you possibly point me in the right direction?
---------- Post added at 06:29 PM ---------- Previous post was at 05:40 PM ----------
SS823 said:
I have the same exact problem. Where did you finding the emergency file transfer that uses fastboot?
---------- Post added at 05:40 PM ---------- Previous post was at 05:30 PM ----------
I can't find twrp for Asus Prime on their website... or the thread in this forum? Its probably somewhere obvious, could you possibly point me in the right direction?
Click to expand...
Click to collapse
Never mind, easy find.
Fixed, but newbie question
I reverted back to CM10 by pushing a the ROM in adb.
I was hoping to try things over, but as a newbie I am not sure how (really, when) to install the bootloader necessary for 4.2.
I know baked bean requires the offical firmware from ASUS, which I have, but when do I install it, before or after the ROM?
SS823 said:
I reverted back to CM10 by pushing a the ROM in adb.
I was hoping to try things over, but as a newbie I am not sure how (really, when) to install the bootloader necessary for 4.2.
I know baked bean requires the offical firmware from ASUS, which I have, but when do I install it, before or after the ROM?
Click to expand...
Click to collapse
Flash the ASUS JB rom first. it should update your bootloader and allow you to boot custom JB roms from then on.
Thanks. If I install the ASUS firmware will I will lose root?
Sent from my Transformer Prime TF201 using xda app-developers app
improvements in touch, performance and stability of the system, detecting the sim, htc share
88 Mb.
Enviado desde mi HTC One max mediante Tapatalk
wow, could you post the OTA file for us here please?
Where is the OTA?
Enviado desde mi HTC One max mediante Tapatalk
This is for what model/variant is this for? Verizon Sprint International?
International
axpion
OTA Link
Here it is:
https://drive.google.com/file/d/0B27MEA0Eavx1aUt4UVdFcWFLTEk/edit?usp=sharing
shenye said:
Here it is:
https://drive.google.com/file/d/0B27MEA0Eavx1aUt4UVdFcWFLTEk/edit?usp=sharing
Click to expand...
Click to collapse
Thanks for posting
Sent from my HTC One max using XDA Premium 4 mobile app
---------- Post added at 12:12 PM ---------- Previous post was at 11:18 AM ----------
shenye said:
Here it is:
https://drive.google.com/file/d/0B27MEA0Eavx1aUt4UVdFcWFLTEk/edit?usp=sharing
Click to expand...
Click to collapse
Do you know which version of the software was there on your phone prior to this ?
Hello there,
I have also received this update but can't apply it. I am on stock rom but with rom manager clockworkMod recovery,rooted, s-off and relocked the bootloader. CID is J_15
I am little bit confused with this, appreciate your kindly advise. Thanks.
Ota only in recovery stock, no?
axpion
axpion said:
Ota only in recovery stock, no?
axpion
Click to expand...
Click to collapse
I do have the full backup files. do i need to unroot unlock and lock the bootloader via htcdev ? and restore the recovery.img from backup ? Thanks a lot
maximum not know two days ago that I have not
axpion
ahmedalmandhari said:
I do have the full backup files. do i need to unroot unlock and lock the bootloader via htcdev ? and restore the recovery.img from backup ? Thanks a lot
Click to expand...
Click to collapse
Do you mean that I should unroot and remove the custom recovery and put back the stock recovery which I back it up earlier.
pradeepvizz said:
Thanks for posting
Sent from my HTC One max using XDA Premium 4 mobile app
---------- Post added at 12:12 PM ---------- Previous post was at 11:18 AM ----------
Do you know which version of the software was there on your phone prior to this ?
Click to expand...
Click to collapse
Well this is the file name
Code:
OTA_T6_UL_JB43_SENSE55_HTC_Europe_1.54.401.1-1.19.401.2_release_341451bchda87kitj44eh9.zip
Which clearly shows which version it is targeted at.
shenye said:
Well this is the file name
Code:
OTA_T6_UL_JB43_SENSE55_HTC_Europe_1.54.401.1-1.19.401.2_release_341451bchda87kitj44eh9.zip
Which clearly shows which version it is targeted at.
Click to expand...
Click to collapse
So silly of me, thanks
Any noticeable improvements?
Sent from my HTC One max using XDA Premium 4 mobile app
---------- Post added at 06:40 PM ---------- Previous post was at 06:09 PM ----------
shenye said:
Well this is the file name
Code:
OTA_T6_UL_JB43_SENSE55_HTC_Europe_1.54.401.1-1.19.401.2_release_341451bchda87kitj44eh9.zip
Which clearly shows which version it is targeted at.
Click to expand...
Click to collapse
Oh God, This is Shen! did not realize it until now lol
Good to see you at the MAX forums
Issues with Update and Fastboot
I'm also having issues with the update... Got stock rom, cwm recovery and backups. Glad to have it back after screwing up my partition... ? Atm I'm not able to get my One connected in fastboot. As usbdisk it does, though... I de- and reinstalled all adb's and other necessary drivers several times... And I thought about flashing the recovery img of the update zip to get the whole update installed; do you think this is possible (provided I get my device connected in fastboot) ?
lol I just saw the stock recovery in an other thread, nevermind, I'll give it a shot...
MasterMace said:
I'm also having issues with the update... Got stock rom, cwm recovery and backups. Glad to have it back after screwing up my partition... �� Atm I'm not able to get my One connected in fastboot. As usbdisk it does, though... I de- and reinstalled all adb's and other necessary drivers several times... And I thought about flashing the recovery img of the update zip to get the whole update installed; do you think this is possible (provided I get my device connected in fastboot) ��
lol I just saw the stock recovery in an other thread, nevermind, I'll give it a shot...
Click to expand...
Click to collapse
And? Problems?
Still problems with adb
RayHeath said:
And? Problems?
Click to expand...
Click to collapse
I'm still strugglin' gettting my device connected in adb/fastboot
This is what I get when I plug in my One and reboot-bootloader and then it doesn't recognize the device....
Uninstall every driver you see connected to it in windows device manager. Restart pc and install htc sync manager. After it installs connect phone once without usb debugging and then unplug and connect again with usb debugging. You can then uninstall only htc sync manager if you want. Leave the driver package it installs. Then try...
MasterMace said:
I'm still strugglin' gettting my device connected in adb/fastboot
This is what I get when I plug in my One and reboot-bootloader and then it doesn't recognize the device....
Click to expand...
Click to collapse
Your OS seems pretty old there. Which country are you from? My OS is 1.25.111.2, I also agree with Jiggity Janx. Reinstall HTC Sync, and follow his instructions.
Jiggity Janx said:
Uninstall every driver you see connected to it in windows device manager. Restart pc and install htc sync manager. After it installs connect phone once without usb debugging and then unplug and connect again with usb debugging. You can then uninstall only htc sync manager if you want. Leave the driver package it installs. Then try...
Click to expand...
Click to collapse
Oh oh
RayHeath said:
Your OS seems pretty old there. Which country are you from? My OS is 1.25.111.2, I also agree with Jiggity Janx. Reinstall HTC Sync, and follow his instructions.
Click to expand...
Click to collapse
So, thanx for your advices. I already tried to de- and reinstall all drivers I'm Swiss FYI... I guess it doesn't mean something good when I look the attached shot...
..
Really noone can help? I am really worried, i know that i shouldnt do something which i dont completly understand, i am stupid. I really just want my phone back, even without root. As i mentioned before, I have PhillZ Touch 5 (CWM v6.0.3.7) recovery and acces to bootloader. My CID is T-Mob009.
Could you please tell me at least if this is fixable? Can i go to my local phone service and they will fix it for me? Or can i do something at home?
jeryh160 said:
Really noone can help? I am really worried, i know that i shouldnt do something which i dont completly understand, i am stupid. I really just want my phone back, even without root. As i mentioned before, I have PhillZ Touch 5 (CWM v6.0.3.7) recovery and acces to bootloader. My CID is T-Mob009.
Could you please tell me at least if this is fixable? Can i go to my local phone service and they will fix it for me? Or can i do something at home?
Click to expand...
Click to collapse
it's still can be fix it, not a big problem
maybe you can try reinstall the stock rom
Don't go to local phone service, they can't help
Just find a ROM specific for your phone (search xda for desire x) and put it on sdcard. Either with an external SD reader or through recovery. Then wipe all in recovery, then flash ROM and gapps if needed
Then reboot
Sent from my Nexus 7 using XDA Premium 4 mobile app
jeryh160 said:
Long story short: I think i bricked my HTC Desire X. After rooting (succesful) i tried to remove stock T-Mobile apps. They were re-installing after reboot. I did some research and found many solutions, one of them was to install custom kernel. So, i grabbed neXusKERNELv3 and using WinDroid HTC Desire X Toolkit (Fastboot Commands > Flash > System Image) i flashed .img file to my phone. After rebooting nothing happens - HTC quietly brilliant logo, vibration and blank black screen.
One of the solutions of this problem i found in the internet was to install custom rom, but to do so, i have to acces my sd card, which i cant.
I have acces to bootloader and recovery (phillaz touch 5).
Anyone can help me? I'm noob, i just wanted to get rid of those annoying T-Mobile apps!
Thanks in advance and sorry for my bad English, im not native english speaker.
Update: I turned on the phone and left it alone for some time - after HTC logo and black screen nothing happens for some time and then htc logo appears again, and there is black screen again.
Click to expand...
Click to collapse
Dude one thing, your phone isin't bricked and you said you have Phiz touch recovery right? You can mount your SD card from there (I believe) then...
Before you do any of these make sure you have an unlocked phone (I know you said it. Rooted and unlocked bootloader), java and hansoon 2000's toolkir (optional, if you don't want to use CMD.) and an updated phone (you should have the 1.25 Hboot by now.)
1. Download a ROM and extract the boot.img to the folder where you have "fastboot.exe"
2. Boot your phone to recovery then mount your SD card from there.
3. Copy the ROM on to your SD card. (Oh you know that.)
4. Reboot back to bootloader and select fastboot
5. Plug your phone to your computer using a USB cable and open a command prompt window (CMD)
6. Type the following codes...
Code:
fastboot devices
Then
Code:
fastboot erase cache
And finally
Code:
fastboot flash boot (name_of_image).img
7. BACK UP YOUR STOCK ROM
8. Do a wipe data/factory reset
9. Wipe dalvik cache.
10. Flash the ROM that you placed in your SD card.
I hope it worked lol. Goodluck bro!
In addition if you don't have card reader
1. Flash TWRP or CWM recovery
2. From recovery open "ADB Sideload"
3. Flash the rom.zip with ADB sideload
For more info: http ://android-revolution-hd.blogspot.com.tr/2013/12/ow-to-use-adb-sideload.html
4. Flash kernel (boot.img) via fastboot
Done
I cant believe i was such a dumbass and i didnt think about THAT simple solution earlier! Anyway, my phone's working again thanks to you. IDK why flashing a kernel through that tool i mentioned in 1st post didnt work, but nevermind. Thank you again and have a good day!
jeryh160 said:
I cant believe i was such a dumbass and i didnt think about THAT simple solution earlier! Anyway, my phone's working again thanks to you. IDK why flashing a kernel through that tool i mentioned in 1st post didnt work, but nevermind. Thank you again and have a good day!
Click to expand...
Click to collapse
Friend,
can you tell me what should I exactly do. My problem is as same as you!
Where can I download flashable zip?
---------- Post added at 09:28 AM ---------- Previous post was at 09:02 AM ----------
jeryh160 said:
I cant believe i was such a dumbass and i didnt think about THAT simple solution earlier! Anyway, my phone's working again thanks to you. IDK why flashing a kernel through that tool i mentioned in 1st post didnt work, but nevermind. Thank you again and have a good day!
Click to expand...
Click to collapse
Friend,
please let me know where can I download ROM and boot.img files. Then I can execute same steps ..
thanks for advance
anybody there to help me?
veerusayz said:
anybody there to help me?
Click to expand...
Click to collapse
Just choose a ROM from Android General Section and download it; also you can choose a kernel from Original Android development.
i don't know which ROM to download. can you pls share me the trusted ROM link so that I can download
Why people having problems when they flash kernel through toolkits? Any reason?
Sent from my HTC Desire X using xda app-developers app
veerusayz said:
i don't know which ROM to download. can you pls share me the trusted ROM link so that I can download
Click to expand...
Click to collapse
Download any jb Rom u like. See the screenshots of every rom & download the one which u want.
veerusayz said:
i don't know which ROM to download. can you pls share me the trusted ROM link so that I can download
Click to expand...
Click to collapse
Go to android development section where you can find various roms like this
http://forum.xda-developers.com/sho...ENSE-dx5 1.02 (04-01-2014) JB 4.1.2 | Sense 5
Sent from my HTC Desire X using xda app-developers app
Thanks
I tried to install following
http://d-h.st/Jk5
I got installation aborted error..what is the issue?
---------- Post added at 05:02 AM ---------- Previous post was at 04:21 AM ----------
Anybody there to help me...pls give quick replies..
veerusayz said:
Thanks
I tried to install following
http://d-h.st/Jk5
I got installation aborted error..what is the issue?
---------- Post added at 05:02 AM ---------- Previous post was at 04:21 AM ----------
Anybody there to help me...pls give quick replies..
Click to expand...
Click to collapse
What device do you have? Boot into bootloader and write down everything on that screen here
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
What device do you have? Boot into bootloader and write down everything on that screen here
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi Im using htc desire x...
what do you mean by Boot into bootloader and write down everything on that screen here...sorry for my ignorance..im new to this
Read this thread thoroughly and this will explain you everything..
http://forum.xda-developers.com/sho..., custom roms installing, going back to stock
And there is a thanks button hit it if you want to give thanks
Sent from my HTC Desire X using xda app-developers app
Volume down while powering on, there will be a bunch of information about your phone. Write down all line for line
Sent from my Nexus 7 using XDA Premium 4 mobile app
Thanks for all your help.
I've flashed boot.img from fastboot command. It worked..To be frank, I dont know how it worked..but it worked :laugh: